Abstract: High-velocity oxygen fuel (HVOF) thermal spraying
uses a combustion process to heat the gas flow and coating material.
A computational fluid dynamics (CFD) model has been developed to
predict gas dynamic behavior in a HVOF thermal spray gun in which
premixed oxygen and propane are burnt in a combustion chamber
linked to a parallel-sided nozzle. The CFD analysis is applied to
investigate axisymmetric, steady-state, turbulent, compressible,
chemically reacting, subsonic and supersonic flow inside and outside
the gun. The gas velocity, temperature, pressure and Mach number
distributions are presented for various locations inside and outside
the gun. The calculated results show that the most sensitive
parameters affecting the process are fuel-to-oxygen gas ratio and
total gas flow rate. Gas dynamic behavior along the centerline of the
gun depends on both total gas flow rate and fuel-to-oxygen gas ratio.
The numerical simulations show that the axial gas velocity and Mach
number distribution depend on both flow rate and ratio; the highest
velocity is achieved at the higher flow rate and most fuel-rich ratio.
In addition, the results reported in this paper illustrate that the
numerical simulation can be one of the most powerful and beneficial
tools for the HVOF system design, optimization and performance
analysis.
Abstract: This paper aims to scale up Dye-sensitized Solar Cell
(DSSC) production using a commonly available industrial material –
stainless steel - and industrial plasma equipment. A working DSSC
electrode formed by (1) coating titania nanotube (TiO2 NT) film on
304 stainless steel substrate using a plasma spray technique; then, (2)
filling the nano-pores of the TiO2 NT film using a TiF4 sol-gel method.
A DSSC device consists of an anode absorbed photosensitive dye
(N3), a transparent conductive cathode with platinum (Pt)
nano-catalytic particles adhered to its surface, and an electrolytic
solution sealed between the anode and the transparent conductive
cathode. The photo-current conversion efficiency of the DSSC sample
was tested under an AM 1.5 Solar Simulator. The sample has a short
current (Isc) of 0.83 mA cm-2, open voltage (Voc) of 0.81V, filling
factor (FF) of 0.52, and conversion efficiency (η) of 2.18% on a 0.16
cm2 DSSC work-piece.
Abstract: Students with high level skills are in demand, especially in scare skill environments. If universities wish to be successful and competitive, its students need to be adequately equipped with the necessary tools. Work Integrated Learning (WIL) is an essential component of the education of a student. The relevance of higher education should be assessed in terms of how it meets the needs of society and the world of work in a global economy. This paper demonstrates how to use Habermas's theory of communicative action to reflect on students- perceptions on their integration in the work environment to achieve social integration and financial justification. Interpretive questionnaires are used to determine the students- view of how they are integrated into society, and contributing to the economy. This paper explores the use of Habermas-s theory of communicative action to give theoretical and methodological guidance for the practice of social findings obtained in this inquiry.
Abstract: Functional near infrared spectroscopy (fNIRS) is a
practical non-invasive optical technique to detect characteristic of
hemoglobin density dynamics response during functional activation of
the cerebral cortex. In this paper, fNIRS measurements were made in
the area of motor cortex from C4 position according to international
10-20 system. Three subjects, aged 23 - 30 years, were participated in
the experiment.
The aim of this paper was to evaluate the effects of different motor
activation tasks of the hemoglobin density dynamics of fNIRS signal.
The chaotic concept based on deterministic dynamics is an important
feature in biological signal analysis. This paper employs the chaotic
properties which is a novel method of nonlinear analysis, to analyze
and to quantify the chaotic property in the time series of the
hemoglobin dynamics of the various motor imagery tasks of fNIRS
signal. Usually, hemoglobin density in the human brain cortex is
found to change slowly in time. An inevitable noise caused by various
factors is to be included in a signal. So, principle component analysis
method (PCA) is utilized to remove high frequency component. The
phase pace is reconstructed and evaluated the Lyapunov spectrum, and
Lyapunov dimensions. From the experimental results, it can be
conclude that the signals measured by fNIRS are chaotic.
Abstract: Automatic reusability appraisal is helpful in
evaluating the quality of developed or developing reusable software
components and in identification of reusable components from
existing legacy systems; that can save cost of developing the
software from scratch. But the issue of how to identify reusable
components from existing systems has remained relatively
unexplored. In this research work, structural attributes of software
components are explored using software metrics and quality of the
software is inferred by different Neural Network based approaches,
taking the metric values as input. The calculated reusability value
enables to identify a good quality code automatically. It is found that
the reusability value determined is close to the manual analysis used
to be performed by the programmers or repository managers. So, the
developed system can be used to enhance the productivity and
quality of software development.
Abstract: This paper reported an experimental research of
steady-state heat transfer behaviour of a gas flowing through a fixed
bed under the different operating conditions. Studies had been carried
out in a fixed-bed packed methanol synthesis catalyst percolated by air
at appropriate flow rate. Both radial and axial direction temperature
distribution had been investigated under the different operating
conditions. The effects of operating conditions including the reactor
inlet air temperature, the heating pipe temperature and the air flow rate
on temperature distribution was investigated and the experimental
results showed that a higher inlet air temperature was conducive to
uniform temperature distribution in the fixed bed. A large temperature
drop existed at the radial direction, and the temperature drop increased
with the heating pipe temperature increasing under the experimental
conditions; the temperature profile of the vicinity of the heating pipe
was strongly affected by the heating pipe temperature. A higher air
flow rate can improve the heat transfer in the fixed bed. Based on the
thermal distribution, heat transfer models of the fixed bed could be
established, and the characteristics of the temperature distribution in
the fixed bed could be finely described, that had an important practical
significance.
Abstract: Microstrip lines, widely used for good reason, are
broadband in frequency and provide circuits that are compact and
light in weight. They are generally economical to produce since they
are readily adaptable to hybrid and monolithic integrated circuit (IC)
fabrication technologies at RF and microwave frequencies. Although,
the existing EM simulation models used for the synthesis and
analysis of microstrip lines are reasonably accurate, they are
computationally intensive and time consuming. Neural networks
recently gained attention as fast and flexible vehicles to microwave
modeling, simulation and optimization. After learning and
abstracting from microwave data, through a process called training,
neural network models are used during microwave design to provide
instant answers to the task learned.This paper presents simple and
accurate ANN models for the synthesis and analysis of Microstrip
lines to more accurately compute the characteristic parameters and
the physical dimensions respectively for the required design
specifications.
Abstract: This study on “The relationship between human
resource practices and Firm Performance is a speculative
investigation research. The purpose of this research are (1) to provide
and to understand of HRM history and current HR practices in the
Philippines (2) to examine the extent of HRM practice among its
Philippine firms effectively; (3) to investigate the relationship
between HRM practice and firm performance in the Philippines. The
survey was done to 233 companies in the Philippines. The
questionnaire is divided into three parts a) to gathers information on
the profile of respondent, b) to measures the extent to which human
resource practices are being practiced in their organization c) to
measure the organizations performance as perceived by human
resource managers and top executives as compared with their
competitors in the same industry. As a result an interesting finding
was that almost 50 percent of firm performance is affected by the
extent of implementation of HR practices in the firm. These results
show that HR practices that are in line with the organization’s
strategic goals are important for future performance.
Abstract: Psoriasis is a chronic inflammatory skin condition
which affects 2-3% of population around the world. Psoriasis Area
and Severity Index (PASI) is a gold standard to assess psoriasis
severity as well as the treatment efficacy. Although a gold standard,
PASI is rarely used because it is tedious and complex. In practice,
PASI score is determined subjectively by dermatologists, therefore
inter and intra variations of assessment are possible to happen even
among expert dermatologists. This research develops an algorithm to
assess psoriasis lesion for PASI scoring objectively. Focus of this
research is thickness assessment as one of PASI four parameters
beside area, erythema and scaliness. Psoriasis lesion thickness is
measured by averaging the total elevation from lesion base to lesion
surface. Thickness values of 122 3D images taken from 39 patients
are grouped into 4 PASI thickness score using K-means clustering.
Validation on lesion base construction is performed using twelve
body curvature models and show good result with coefficient of
determinant (R2) is equal to 1.
Abstract: Data mining has been used very frequently to extract
hidden information from large databases. This paper suggests the use
of decision trees for continuously extracting the clinical reasoning in
the form of medical expert-s actions that is inherent in large number
of EMRs (Electronic Medical records). In this way the extracted data
could be used to teach students of oral medicine a number of orderly
processes for dealing with patients who represent with different
problems within the practice context over time.
Abstract: Author presents the results of a study conducted to identify criteria of efficient information system (IS) with serviceoriented architecture (SOA) realization and proposes a ranking method to evaluate SOA information systems using a set of architecture quality criteria before the systems are implemented. The method is used to compare 7 SOA projects and ranking result for SOA efficiency of the projects is provided. The choice of SOA realization project depends on following criteria categories: IS internal work and organization, SOA policies, guidelines and change management, processes and business services readiness, risk management and mitigation. The last criteria category was analyzed on the basis of projects statistics.
Abstract: Traditional Javanese classic dance is a valuable
inheritance in Java Indonesia. Nowadays, this treasure of culture is
no longer belonging to Javanese people only. Many art departments
from universities around the world already put this as a subject in
their curriculum. Nonetheless, dance is a practical skill. It needs to be
practices so often while accompanied by an instructor to get the right
technique. An interactive Computer Aided Instruction (iCAI) that can
interactively assist the student to practice is developed. By using this
software students can conduct a self practice in studio and get some
feedbacks from the software. This CAI is not intended to replace the
instructor, but to assist them in increasing the student fly-time in
practice.
Abstract: All-to-all personalized communication, also known as complete exchange, is one of the most dense communication patterns in parallel computing. In this paper, we propose new indirect algorithms for complete exchange on all-port ring and torus. The new algorithms fully utilize all communication links and transmit messages along shortest paths to completely achieve the theoretical lower bounds on message transmission, which have not be achieved among other existing indirect algorithms. For 2D r × c ( r % c ) all-port torus, the algorithm has time complexities of optimal transmission cost and O(c) message startup cost. In addition, the proposed algorithms accommodate non-power-of-two tori where the number of nodes in each dimension needs not be power-of-two or square. Finally, the algorithms are conceptually simple and symmetrical for every message and every node so that they can be easily implemented and achieve the optimum in practice.
Abstract: In this paper a new fast simplification method is
presented. Such method realizes Karnough map with large
number of variables. In order to accelerate the operation of the
proposed method, a new approach for fast detection of group
of ones is presented. Such approach implemented in the
frequency domain. The search operation relies on performing
cross correlation in the frequency domain rather than time one.
It is proved mathematically and practically that the number of
computation steps required for the presented method is less
than that needed by conventional cross correlation. Simulation
results using MATLAB confirm the theoretical computations.
Furthermore, a powerful solution for realization of complex
functions is given. The simplified functions are implemented
by using a new desigen for neural networks. Neural networks
are used because they are fault tolerance and as a result they
can recognize signals even with noise or distortion. This is
very useful for logic functions used in data and computer
communications. Moreover, the implemented functions are
realized with minimum amount of components. This is done
by using modular neural nets (MNNs) that divide the input
space into several homogenous regions. Such approach is
applied to implement XOR function, 16 logic functions on one
bit level, and 2-bit digital multiplier. Compared to previous
non- modular designs, a clear reduction in the order of
computations and hardware requirements is achieved.
Abstract: Rounding of coefficients is a common practice in
hardware implementation of digital filters. Where some coefficients
are very close to zero or one, as assumed in this paper, this rounding
action also leads to some computation reduction. Furthermore, if the
discarded coefficient is of high order, a reduced order filter is
obtained, otherwise the order does not change but computation is
reduced. In this paper, the Least Squares approximation to rounded
(or discarded) coefficient FIR filter is investigated. The result also
succinctly extended to general type of FIR filters.
Abstract: In this paper, a new learning algorithm based on a
hybrid metaheuristic integrating Differential Evolution (DE) and
Reduced Variable Neighborhood Search (RVNS) is introduced to train
the classification method PROAFTN. To apply PROAFTN, values of
several parameters need to be determined prior to classification. These
parameters include boundaries of intervals and relative weights for
each attribute. Based on these requirements, the hybrid approach,
named DEPRO-RVNS, is presented in this study. In some cases, the
major problem when applying DE to some classification problems
was the premature convergence of some individuals to local optima.
To eliminate this shortcoming and to improve the exploration and
exploitation capabilities of DE, such individuals were set to iteratively
re-explored using RVNS. Based on the generated results on
both training and testing data, it is shown that the performance of
PROAFTN is significantly improved. Furthermore, the experimental
study shows that DEPRO-RVNS outperforms well-known machine
learning classifiers in a variety of problems.
Abstract: Medical image segmentation based on image smoothing followed by edge detection assumes a great degree of importance in the field of Image Processing. In this regard, this paper proposes a novel algorithm for medical image segmentation based on vigorous smoothening by identifying the type of noise and edge diction ideology which seems to be a boom in medical image diagnosis. The main objective of this algorithm is to consider a particular medical image as input and make the preprocessing to remove the noise content by employing suitable filter after identifying the type of noise and finally carrying out edge detection for image segmentation. The algorithm consists of three parts. First, identifying the type of noise present in the medical image as additive, multiplicative or impulsive by analysis of local histograms and denoising it by employing Median, Gaussian or Frost filter. Second, edge detection of the filtered medical image is carried out using Canny edge detection technique. And third part is about the segmentation of edge detected medical image by the method of Normalized Cut Eigen Vectors. The method is validated through experiments on real images. The proposed algorithm has been simulated on MATLAB platform. The results obtained by the simulation shows that the proposed algorithm is very effective which can deal with low quality or marginal vague images which has high spatial redundancy, low contrast and biggish noise, and has a potential of certain practical use of medical image diagnosis.
Abstract: Mouse L929 fibroblastic cell line, which is widely
used in many experiment aspects, was tested for their differentiation
potency in osteogenic differentiation and adipogenic differentiation.
Human dermal fibroblasts, which their differentiation potency are
still be in confliction, also be taken in the experiment. The
differentiations were conducted by using the inducing medium
ingredients which is generally used to induce differentiation of stem
cells. By the inducing media used, L929 mouse fibroblasts
successfully underwent osteogenic differentiation and adipogenic
differentiation while human dermal fibroblasts underwent only
osteogenic differentiation but not for adipogenic differentiation.
Human dermal fibroblasts are hard to be differentiated in adipogenic
lineage and need specific proper condition for induction.
Abstract: Persuasive technology has been applied in marketing,
health, environmental conservation, safety and other domains and is
found to be quite effective in changing people-s attitude and
behaviours. This research extends the application domains of
persuasive technology to information security awareness and uses a
theory-driven approach to evaluate the effectiveness of a web-based
program developed based on the principles of persuasive technology
to improve the information security awareness of end users. The
findings confirm the existence of a very strong effect of the webbased
program in raising users- attitude towards information security
aware behavior. This finding is useful to the IT researchers and
practitioners in developing appropriate and effective education
strategies for improving the information security attitudes for endusers.
Abstract: This study was initiated with a three prong objective.
One, to identify the relationship between Technological
Competencies factors (Technical Capability, Firm Innovativeness
and E-Business Practices and professional service firms- business
performance. To investigate the predictors of professional service
firms business performance and finally to evaluate the predictors of
business performance according to the type of professional service
firms, a survey questionnaire was deployed to collect empirical data.
The questionnaire was distributed to the owners of the professional
small medium size enterprises services in the Accounting, Legal,
Engineering and Architecture sectors. Analysis showed that all three
Technology Competency factors have moderate effect on business
performance. In addition, the regression models indicate that
technical capability is the most highly influential that could
determine business performance, followed by e-business practices
and firm innovativeness. Subsequently, the main predictor of
business performance for all types of firms is Technical capability.