Abstract: To overcome the product overload of Internet
shoppers, we introduce a semantic recommendation procedure which
is more efficient when applied to Internet shopping malls. The
suggested procedure recommends the semantic products to the
customers and is originally based on Web usage mining, product
classification, association rule mining, and frequently purchasing.
We applied the procedure to the data set of MovieLens Company for
performance evaluation, and some experimental results are provided.
The experimental results have shown superior performance in
terms of coverage and precision.
Abstract: We developed an effective microfluidic device for photoreactions with low reflectance and good heat conductance. The performance of this microfluidic device was tested by carrying out a photoreactive synthesis of benzopinacol and acetone from benzophenone and 2-propanol. The yield reached 36% with an irradiation time of 469.2 s and was improved by more than 30% when compared to the values obtained by the batch method. Therefore, the microfluidic device was found to be effective for improving the yields of photoreactions.
Abstract: In this paper, we present two new ranking and unranking
algorithms for k-ary trees represented by x-sequences in Gray
code order. These algorithms are based on a gray code generation algorithm
developed by Ahrabian et al.. In mentioned paper, a recursive
backtracking generation algorithm for x-sequences corresponding to
k-ary trees in Gray code was presented. This generation algorithm
is based on Vajnovszki-s algorithm for generating binary trees in
Gray code ordering. Up to our knowledge no ranking and unranking
algorithms were given for x-sequences in this ordering. we present
ranking and unranking algorithms with O(kn2) time complexity for
x-sequences in this Gray code ordering
Abstract: Flood management is one of the important fields in
urban storm water management. Floods are influenced by the
increase of huge storm event, or improper planning of the area. This study mainly provides the flood protection in four stages; planning,
flood event, responses and evaluation. However it is most effective then flood protection is considered in planning/design and
evaluation stages since both stages represent the land development of the area. Structural adjustments are often more reliable than nonstructural
adjustments in providing flood protection, however
structural adjustments are constrained by numerous factors such as
political constraints and cost. Therefore it is important to balance
both adjustments with the situation. The technical decisions provided
will have to be approved by the higher-ups who have the power to
decide on the final solution. Costs however, are the biggest factor in
determining the final decision. Therefore this study recommends
flood protection system should have been integrated and enforces
more in the early stages (planning and design) as part of the storm
water management plan. Factors influencing the technical decisions
provided should be reduced as low as possible to avoid a reduction in
the expected performance of the proposed adjustments.
Abstract: This calculation focus on the effect of exchange
interaction J and Coulomb interaction U on spin magnetic moments
(ms) of MnO by using the local spin density approximation plus the
Coulomb interaction (LSDA+U) method within full potential linear
muffin-tin orbital (FP-LMTO). Our calculated results indicated that
the spin magnetic moments correlated to J and U. The relevant
results exhibited the increasing spin magnetic moments with
increasing exchange interaction and Coulomb interaction.
Furthermore, equations of spin magnetic moment, which h good
correspondence to the experimental data 4.58μB, are defined ms =
0.11J +4.52μB and ms = 0.03U+4.52μB. So, the relation of J and U
parameter is obtained, it is obviously, J = -0.249U+1.346 eV.
Abstract: In this paper, the effect of modified clay on the
mechanical efficiency of epoxy resin is examined. Studies by X ray
diffraction and microscopic transient electron method show that
modified clay distribution in polymer area is intercalated kind.
Examination the results of mechanical tests shows that existence of
modified clay in epoxy area increases pressure yield strength, tension
module and nano composite fracture toughness in relate of pure
epoxy. By microscopic examinations it is recognized too that the
action of toughness growth of this kind of nano composite is due to
crack deflection, formation of new surfaces and fracture of clay piles.
Abstract: This paper introduces a method of calculating the
quantities of construction materials and construction waste on site in
city of Novi Sad. In buildings is about 40% of the total weight of
materials that are in circulation in the world economic space. The
best solution for this waste is to be stored at source, at the point of
generation. There are several treatment options for this type of waste,
reduction at source, reuse, recycling. Beside its negative effects on
the environment, construction waste can be and resource. Novi Sad is
divided in 16 single family resident zones and 10 multi family
resident zones. For every zone of the city, quantities of used
construction materials and construction waste were obtained.
Rational use of natural resources is an essential factor in applying the
principles of development with savings.
Abstract: Industrial design engineering is an information and
knowledge intensive job. Although Wikipedia offers a lot of this
information, design engineers are better served with a wiki tailored to
their job, offering information in a compact manner and functioning
as a design tool. For that reason WikID has been developed.
However for the viability of a wiki, an active user community is
essential. The main subject of this paper is a study to the influence of
the communication and the contents of WikID on the user-s
willingness to contribute.
At first the theory about a website-s first impression, general
usability guidelines and user motivation in an online community is
studied. Using this theory, the aspects of the current site are analyzed
on their suitability. These results have been verified with a
questionnaire amongst 66 industrial design engineers (or students
industrial design engineering).
The main conclusion is that design engineers are enchanted with
the existence of WikID and its knowledge structure (taxonomy) but
this structure has not become clear without any guidance. In other
words, the knowledge structure is very helpful for inspiring and
guiding design engineers through their tailored knowledge domain in
WikID but this taxonomy has to be better communicated on the main
page. Thereby the main page needs to be fitted more to the target
group preferences.
Abstract: As the demand and prices of various petroleum products have been on the rise in recent years, there is a growing need for alternative fuels. Biodiesel, which consists of alkyl monoesters of fatty acids from vegetable oils and animal fats, is considered as an alternative to petroleum diesel. Biodiesel has comparable performance with that of diesel and has lower brake specific fuel consumption than diesel with significant reduction in emissions of CO, hydrocarbons (HC) and smoke with however, a slight increase in NOx emissions. This paper analyzes the effect of cooled exhaust gas recirculation in the combustion characteristics of a direct injection compression ignition engine using biodiesel blended fuel as opposed to the conventional system. The combustion parameters such as cylinder pressure, heat release rate, delay period and peak pressure were analyzed at various loads. The maximum cylinder pressure reduces as the fraction of biodiesel increases in the blend the maximum rate of pressure rise was found to be higher for diesel at higher engine loads.
Abstract: This work investigated the phenology of Parah tree
(Elateriospermum tapos) using the General Purpose Atmosphere
Plant Soil Simulator (GAPS model) to determine the amount of Plant
Available Water (PAW) in the soil. We found the correlation
between PAW and the timing of budburst and flower burst at Khao
Nan National Park, Nakhon Si Thammarat, Thailand. PAW from the
GAPS model can be used as an indicator of soil water stress. The low
amount of PAW may lead to leaf shedding in Parah trees.
Abstract: Age at first marriage is a basic temporal term that is
culturally constructed for marriage relationship between an adult
male and an adult female intended to have sex, to reproduce and to
adapt to environment from one generation to another around the
world. Cross-cultural evidences suggest that age at first marriage for
both male and female not only varies across the cultures, but also
varies among the subcultures of the same society. The purpose of the
study was to compare age at first marriage for husband and wife
including age differences between them between Muslim and Santal
communities in rural Bangladesh. For this we hypothesized that (1)
there were significant differences in age at first marriage and age
interval between husband and wife between Muslim and Santal
communities in rural Bangladesh. In so doing, 288 couples (145 pairs
of couples for Muslim and 143 pairs of couples for Santal) were
selected by cluster random sampling from the Kalna village situated
in the Tanore Upazila of Rajshahi district, Bangladesh, whose
current mean age range was 36.59 years for husband and 28.85 years
for wife for the Muslim and 31.74 years for husband and 25.21 years
for wife for the Santal respectively. The results of Independent
Sample t test showed that mean age at first marriage for the Muslim
samples was 23.05 years for husbands and 15.11 years for wives,
while mean age at first marriage for the Santal samples was 20.71
years for husbands and 14.34 years for wives respectively that were
significantly different at p0.05) among the selected husbands
and wives between the two communities. This study recommends
that further cross-cultural researches should be done on the causeeffect
relationships between socio-cultural factors and age at
marriage between the two communities in Bangladesh.
Abstract: We study the problem of reconstructing a three dimensional binary matrices whose interiors are only accessible through few projections. Such question is prominently motivated by the demand in material science for developing tool for reconstruction of crystalline structures from their images obtained by high-resolution transmission electron microscopy. Various approaches have been suggested to reconstruct 3D-object (crystalline structure) by reconstructing slice of the 3D-object. To handle the ill-posedness of the problem, a priori information such as convexity, connectivity and periodicity are used to limit the number of possible solutions. Formally, 3Dobject (crystalline structure) having a priory information is modeled by a class of 3D-binary matrices satisfying a priori information. We consider 3D-binary matrices with periodicity constraints, and we propose a polynomial time algorithm to reconstruct 3D-binary matrices with periodicity constraints from two orthogonal projections.
Abstract: Successive event of explosion earthquake and harmonic tremor recorded at Semeru volcano were analyzed to investigate the dynamical system regarding to their eruptive mechanism. The eruptive activity at Semeru volcano East Java, Indonesia is intermittent emission of ash and bombs with Strombolian style which occurred at interval of 15 to 45 minutes. The explosive eruptions accompanied by explosion earthquakes and followed by volcanic tremor which generated by continuous emission of volcanic ash. The spectral and Lyapunov exponent of successive event of explosion and harmonic tremor were analyzed. Peak frequencies of explosion earthquakes range 1.2 to 1.9 Hz and those of the harmonic tremor have peak frequency range 1.5 — 2.2 Hz. The phase space is reconstructed and evaluated based on the Lyapunov exponents. Harmonic tremors have smaller Lyapunov exponent than explosion earthquakes. It can be considerably as correlated complexity of the mechanism from the variance of spectral and fractal dimension and can be concluded that the successive event of harmonic tremor and explosions are chaotic.
Abstract: The occurrence of missing values in database is a serious problem for Data Mining tasks, responsible for degrading data quality and accuracy of analyses. In this context, the area has shown a lack of standardization for experiments to treat missing values, introducing difficulties to the evaluation process among different researches due to the absence in the use of common parameters. This paper proposes a testbed intended to facilitate the experiments implementation and provide unbiased parameters using available datasets and suited performance metrics in order to optimize the evaluation and comparison between the state of art missing values treatments.
Abstract: Extensive information is required within a R&D environment,
and a considerable amount of time and efforts are being
spent on finding the necessary information. An adaptive information
providing system would be beneficial to the environment, and a
conceptual model of the resources, people and context is mandatory
for developing such applications. In this paper, an information model
on various contexts and resources is proposed which provides the
possibility of effective applications for use in adaptive information
systems within a R&D project and meeting environment.
Abstract: In this paper, Novel method, Particle Swarm Optimization (PSO) algorithm, based technique is proposed to estimate and analyze the steady state performance of self-excited induction generator (SEIG). In this novel method the tedious job of deriving the complex coefficients of a polynomial equation and solving it, as in previous methods, is not required. By comparing the simulation results obtained by the proposed method with those obtained by the well known mathematical methods, a good agreement between these results is obtained. The comparison validates the effectiveness of the proposed technique.
Abstract: Carrier mobility has become the most important
characteristic of high speed low dimensional devices. Due to
development of very fast switching semiconductor devices, speed of
computer and communication equipment has been increasing day by
day and will continue to do so in future. As the response of any
device depends on the carrier motion within the devices, extensive
studies of carrier mobility in the devices has been established
essential for the growth in the field of low dimensional devices.
Small-signal ac transport of degenerate two-dimensional hot
electrons in GaAs quantum wells is studied here incorporating
deformation potential acoustic, polar optic and ionized impurity
scattering in the framework of heated drifted Fermi-Dirac carrier
distribution. Delta doping is considered in the calculations to
investigate the effects of double delta doping on millimeter and submillimeter
wave response of two dimensional hot electrons in GaAs
nanostructures. The inclusion of delta doping is found to enhance
considerably the two dimensional electron density which in turn
improves the carrier mobility (both ac and dc) values in the GaAs
quantum wells thereby providing scope of getting higher speed
devices in future.
Abstract: This research is designed for helping a WAPbased mobile phone-s user in order to analyze of logistics in the traffic area by applying and designing the accessible processes from mobile user to server databases. The research-s design comprises Mysql 4.1.8-nt database system for being the server which there are three sub-databases, traffic light – times of intersections in periods of the day, distances on the road of area-blocks where are divided from the main sample-area and speeds of sample vehicles (motorcycle, personal car and truck) in periods of the day. For interconnections between the server and user, PHP is used to calculate distances and travelling times from the beginning point to destination, meanwhile XHTML applied for receiving, sending and displaying data from PHP to user-s mobile. In this research, the main sample-area is focused at the Huakwang-Ratchada-s area, Bangkok, Thailand where usually the congested point and 6.25 km2 surrounding area which are split into 25 blocks, 0.25 km2 for each. For simulating the results, the designed server-database and all communicating models of this research have been uploaded to www.utccengineering.com/m4tg and used the mobile phone which supports WAP 2.0 XHTML/HTML multimode browser for observing values and displayed pictures. According to simulated results, user can check the route-s pictures from the requiring point to destination along with analyzed consuming times when sample vehicles travel in various periods of the day.
Abstract: Web applications have become very complex and crucial, especially when combined with areas such as CRM (Customer Relationship Management) and BPR (Business Process Reengineering), the scientific community has focused attention to Web applications design, development, analysis, and testing, by studying and proposing methodologies and tools. This paper proposes an approach to automatic multi-dimensional concern mining for Web Applications, based on concepts analysis, impact analysis, and token-based concern identification. This approach lets the user to analyse and traverse Web software relevant to a particular concern (concept, goal, purpose, etc.) via multi-dimensional separation of concerns, to document, understand and test Web applications. This technique was developed in the context of WAAT (Web Applications Analysis and Testing) project. A semi-automatic tool to support this technique is currently under development.
Abstract: Despite various methods that exist in software risk management, software projects have a high rate of failure. When complexity and size of the projects are increased, managing software development becomes more difficult. In these projects the need for more analysis and risk assessment is vital. In this paper, a classification for software risks is specified. Then relations between these risks using risk tree structure are presented. Analysis and assessment of these risks are done using probabilistic calculations. This analysis helps qualitative and quantitative assessment of risk of failure. Moreover it can help software risk management process. This classification and risk tree structure can apply to some software tools.