Abstract: The main objective of this research is to synthesize silk fibroin fiber for indoor air particulate removal. Silk cocoons were de-gummed using 0.5 wt % Na2CO3 alkaline solutions at 90 Ó╣ìC for 60 mins, washed with distilled water, and dried at 80 Ó╣ìC for 3 hrs in a vacuum oven. Two sets of experiment were conducted to investigate the impacts of initial particulate matter (PM) concentration and that of air flow rate on the removal efficiency. Rice bran collected from a local rice mill in Ubonratchathani province was used as indoor air contaminant in this work. The morphology and physical properties of silk fibroin (SF) fiber were measured. The SEM revealed the deposition of PM on the used fiber. The PM removal efficiencies of 72.29 ± 3.03 % and 39.33 ± 1.99 % were obtained of PM10 and PM2.5, respectively, when using the initial PM concentration at 0.040 mg/m3 and 0.020 mg/m3 of PM10 and PM2.5, respectively, with the air flow rate of 5 L/min.
Abstract: In this paper the behavior of the decision feedback
equalizers (DFEs) adapted by the decision-directed or the constant
modulus blind algorithms is presented. An analysis of the error
surface of the corresponding criterion cost functions is first
developed. With the intention of avoiding the ill-convergence of the
algorithm, the paper proposes to modify the shape of the cost
function error surface by using a soft decision instead of the hard
one. This was shown to reduce the influence of false decisions and to
smooth the undesirable minima. Modified algorithms using the soft
decision during a pseudo-training phase with an automatic switch to
the properly tracking phase are then derived. Computer simulations
show that these modified algorithms present better ability to avoid
local minima than conventional ones.
Abstract: The acid rain causes change in pH level of soil it is
directly influence on root and leaf growth. Yield of the crop was
reduced if acidity of soil is more. Acid rain seeps into the earth and
poisons plants and trees by dissolving toxic substances in the soil,
such as aluminum, which get absorbed by the roots. In present
investigation, effect of acid rain on crop Vigna radiata was studied.
The effect of acid rain on change in soil fertility was detected in
which pH of control sample was 6.5 and pH of 1% H2SO4 and 1%
HNO3 were 3.5. Nitrogen nitrate in soil was high in 1% HNO3 treated
soil & Control sample. Ammonium nitrogen in soil was low in 1%
HNO3 & H2SO4 treated soil. Ammonium nitrogen was medium in
control and other samples. The effect of acid rain on seed
germination on 3rd day of germination control sample growth was
6.1cm with plumule 0.001% HNO3 & 0.001% H2SO4 was 5.5cm
with plumule and 8cm with plumule. On 10th day fungal growth was
observed in 1% and 0.1% H2SO4 concentrations when all plants were
dead. The effect of acid rain on crop productivity was investigated on
3rd day roots were developed in plants. On 12th day Vigna radiata
showed more growth in 0.1% HNO3 and 0.1% H2SO4 treated plants
as compare to control plants. On 20th day development of
discoloration of plant pigments were observed on acid treated plants
leaves. On 34th day Vigna radiata showed flower in 0.1% HNO3,
0.01% HNO3 and 0.01% H2SO4treated plants and no flowers were
observed on control plants. On 42th day 0.1% HNO3, 0.01% HNO
and 0.01% H2SO4 treated Vigna radiata variety and control plants
were showed seeds on plants. In Vigna radiate variety 0.1%, 0.01%
HNO3, 0.01% H2SO4treated plants were dead on 46th day and fungal
growth was observed. The toxicological study was carried out on
Vigna radiata plants exposed to 1% HNO3 cells were damaged more
than 1% H2SO4. Leaf sections exposed to 0.001% HNO3 & H2SO4
showed less damaged of cells and pigmentation observed in entire
slide when compare with control plant.
Abstract: This paper proposes to use ETM+ multispectral data
and panchromatic band as well as texture features derived from the
panchromatic band for land cover classification. Four texture features
including one 'internal texture' and three GLCM based textures
namely correlation, entropy, and inverse different moment were used
in combination with ETM+ multispectral data. Two data sets
involving combination of multispectral, panchromatic band and its
texture were used and results were compared with those obtained by
using multispectral data alone. A decision tree classifier with and
without boosting were used to classify different datasets. Results
from this study suggest that the dataset consisting of panchromatic
band, four of its texture features and multispectral data was able to
increase the classification accuracy by about 2%. In comparison, a
boosted decision tree was able to increase the classification accuracy
by about 3% with the same dataset.
Abstract: Our work is part of the heterogeneous data
integration, with the definition of a structural and semantic mediation
model. Our aim is to propose architecture for the heterogeneous
sources metadata mediation, represented by XML, RDF and RuleML
models, providing to the user the metadata transparency. This, by
including data structures, of natures fundamentally different, and
allowing the decomposition of a query involving multiple sources, to
queries specific to these sources, then recompose the result.
Abstract: The residue number system (RNS), due to its
properties, is used in applications in which high performance
computation is needed. The carry free nature, which makes the
arithmetic, carry bounded as well as the paralleling facility is the
reason of its capability of high speed rendering. Since carry is not
propagated between the moduli in this system, the performance is
only restricted by the speed of the operations in each modulus. In this
paper a novel method of number representation by use of redundancy
is suggested in which {rn- 2,rn-1,rn} is the reference moduli set
where r=2k+1 and k =1, 2,3,.. This method achieves fast
computations and conversions and makes the circuits of them much
simpler.
Abstract: This study examines the design and construction of AC Electronics load surge protection in order to carry electric surge load arisen from faults in low voltage electricity system (single phase/220V) by using the principle of electronics load clamping voltage during induction period so that electric voltage could go through to safe load and continue to work. The qualification of the designed device could prevent both transient over voltage and voltage swell. Both will work in cooperation, resulting in the ability to improve and modify the quality of electrical power in Thailand electricity distribution system more effective than the past and help increase the lifetime of electric appliances, electric devices, and electricity protection equipments.
Abstract: The use of human hand as a natural interface for humancomputer interaction (HCI) serves as the motivation for research in hand gesture recognition. Vision-based hand gesture recognition involves visual analysis of hand shape, position and/or movement. In this paper, we use the concept of object-based video abstraction for segmenting the frames into video object planes (VOPs), as used in MPEG-4, with each VOP corresponding to one semantically meaningful hand position. Next, the key VOPs are selected on the basis of the amount of change in hand shape – for a given key frame in the sequence the next key frame is the one in which the hand changes its shape significantly. Thus, an entire video clip is transformed into a small number of representative frames that are sufficient to represent a gesture sequence. Subsequently, we model a particular gesture as a sequence of key frames each bearing information about its duration. These constitute a finite state machine. For recognition, the states of the incoming gesture sequence are matched with the states of all different FSMs contained in the database of gesture vocabulary. The core idea of our proposed representation is that redundant frames of the gesture video sequence bear only the temporal information of a gesture and hence discarded for computational efficiency. Experimental results obtained demonstrate the effectiveness of our proposed scheme for key frame extraction, subsequent gesture summarization and finally gesture recognition.
Abstract: In this paper, we study the existence of solution of
the four-point boundary value problem for second-order differential
equations with impulses by using Leray-Schauder theory:
Abstract: Graph rewriting-based visual model processing is a
widely used technique for model transformation. Visual model
transformations often need to follow an algorithm that requires a
strict control over the execution sequence of the transformation steps.
Therefore, in Visual Model Processors (VMPs) the execution order
of the transformation steps is crucial. This paper presents the visual
control flow support of Visual Modeling and Transformation System
(VMTS), which facilitates composing complex model
transformations of simple transformation steps and executing them.
The VMTS Visual Control Flow Language (VCFL) uses stereotyped
activity diagrams to specify control flow structures and OCL
constraints to choose between different control flow branches. This
paper introduces VCFL, discusses its termination properties and
provides an algorithm to support the termination analysis of VCFL
transformations.
Abstract: Metropolitan areas have suffered from traffic problems, which have steadily increased in many monocentric cities. Urban expansion, population growth, and road network development have resulted in a structural shift toward urban sprawl, increasing commuters’ dependence on private modes of transport. This paper aims to model the influence of socioeconomic and land-use factors on mode choice using a multinomial and nested logit model. Land-use patterns—such as residential, commercial, retail, educational and employment related—affect the choice of mode and destination in the short and medium term. Socioeconomic factors—such as age, gender, income, household size, and house type—also affect choice, while residential location is affected in the long term. Riyadh in Saudi Arabia and Melbourne in Australia were chosen as case studies. Riyadh is a car-dependent city with limited public transport, whereas Melbourne has good public transport but an increase in car dependence. Aggregate level land-use data and disaggregate level individual, household, and journey-to-work data are used to determine the effects of land use and socioeconomic factors on mode choice. The model results determined that urban sprawl is the main factor that affects mode choice, income, and house type.
Abstract: Fish-feed is a major cost component of operating expenses for any aquaculture farm. Due to soaring prices of fish-feed ingredients, the need for better feeding schedule management has become imperative. On such factor that influences the utilization rate of fish-feed are sea currents. Up to now, practical monitoring of fishfeed loss due to sea currents is not exercised. This paper gives a description of an economic methodology that aims at quantifying the amount of fish-feed lost due to sea currents and draws on data from a Mediterranean aquaculture farm to formulate the associated model.
Abstract: Vibration characteristics of subcooled flow boiling on
thin and long structures such as a heating rod were recently
investigated by the author. The results show that the intensity of the
subcooled boiling-induced vibration (SBIV) was influenced strongly
by the conditions of the subcooling temperature, linear power density
and flow velocity. Implosive bubble formation and collapse are the
main nature of subcooled boiling, and their behaviors are the only
sources to originate from SBIV. Therefore, in order to explain the
phenomenon of SBIV, it is essential to obtain reliable information
about bubble behavior in subcooled boiling conditions. This was
investigated at different conditions of coolant subcooling
temperatures of 25 to 75°C, coolant flow velocities of 0.16 to
0.53m/s, and linear power densities of 100 to 600 W/cm. High speed
photography at 13,500 frames per second was performed at these
conditions. The results show that even at the highest subcooling
condition, the absolute majority of bubbles collapse very close to the
surface after detaching from the heating surface. Based on these
observations, a simple model of surface tension and momentum
change is introduced to offer a rough quantitative estimate of the
force exerted on the heating surface during the bubble ebullition. The
formation of a typical bubble in subcooled boiling is predicted to
exert an excitation force in the order of 10-4 N.
Abstract: Carbon dioxide is one of the major green house gases.
It is removed from different streams using amine absorption process.
Sterically hindered amines are suggested as good CO2 absorbers.
Solubility of carbon dioxide (CO2) was measured in aqueous
solutions of 2-Amino-2-methyl-1-propanol (AMP) at temperatures 30
oC, 40 oC and 60 oC. The effect of pressure and temperature was
studied over various concentrations of AMP. It has been found that
pressure has positive effect on CO2 solubility where as solubility
decreased with increasing temperature. Absorption performance of
AMP increased with increasing pressure. Solubility of aqueous AMP
was compared with mo-ethanolamine (MEA) and the absorption
capacity of aqueous solutions of AMP was found to be better.
Abstract: Rapid steps made in the field of Information and Communication Technology (ICT) has facilitated the development of teaching and learning methods and prepared them to serve the needs of an assorted educational institution. In other words, the information age has redefined the fundamentals and transformed the institutions and method of services delivery forever. The vision is the articulation of a desire to transform the method of teaching and learning could proceed through e-learning. E-learning is commonly deliberated to use of networked information and communications technology in teaching and learning practice. This paper deals the general aspects of the e-leaning with its issues, developments, opportunities and challenges, which can the higher institutions own.
Abstract: This paper presents an experimental investigation using Acoustic Emission (AE) technology to monitor sand transportation in multiphase flow. The investigations were undertaken on three-phase (air-water-sand) flow in a horizontal pipe where the superficial gas velocity (VSG) had a range of between 0.2msˉ¹ to 2.0msˉ¹ and superficial liquid velocity (VSL) had a range of between 0.2msˉ¹ to 1.0msˉ¹. The experimental findings clearly show a correlation exists between AE energy levels, sand concentration, superficial gas velocity (VSG), and superficial liquid velocity (VSL).
Abstract: The understanding of the system level of biological behavior and phenomenon variously needs some elements such as gene sequence, protein structure, gene functions and metabolic pathways. Challenging problems are representing, learning and reasoning about these biochemical reactions, gene and protein structure, genotype and relation between the phenotype, and expression system on those interactions. The goal of our work is to understand the behaviors of the interactions networks and to model their evolution in time and in space. We propose in this study an ontological meta-model for the knowledge representation of the genetic regulatory networks. Ontology in artificial intelligence means the fundamental categories and relations that provide a framework for knowledge models. Domain ontology's are now commonly used to enable heterogeneous information resources, such as knowledge-based systems, to communicate with each other. The interest of our model is to represent the spatial, temporal and spatio-temporal knowledge. We validated our propositions in the genetic regulatory network of the Aarbidosis thaliana flower
Abstract: Nanofluids are novel fluids that are going to have an
important role in future industrial thermal device designs. Studies are
being predominantly conducted on the mechanism of these heat
transfers. The key to this attraction is in the increase in thermal
conductivity brought about by the Nanofluids compared with the
base fluid. Different models have been proposed for calculation of
effective thermal conduction that has been gradually modified. In this
investigation effect of nanolayer structure and Brownian motion of
particles are studied and a new modified thermal conductivity model
is proposed. Temperature, concentration, nanolayer thickness and
particle size are taken as variables and their effect are studied
simultaneously on the thermal conductivity of the fluids, showing the
concentration of the nanoparticles to affect the nanolayer thickness
which also affects the Brownian motion.
Abstract: This paper presents a new technique for generating sets of synthetic classifiers to evaluate abstract-level combination methods. The sets differ in terms of both recognition rates of the individual classifiers and degree of similarity. For this purpose, each abstract-level classifier is considered as a random variable producing one class label as the output for an input pattern. From the initial set of classifiers, new slightly different sets are generated by applying specific operators, which are defined at the purpose. Finally, the sets of synthetic classifiers have been used to estimate the performance of combination methods for abstract-level classifiers. The experimental results demonstrate the effectiveness of the proposed approach.
Abstract: The most influential programming paradigm today
is object oriented (OO) programming and it is widely used in
education and industry. Recognizing the importance of equipping
students with OO knowledge and skills, it is not surprising that most
Computer Science degree programs offer OO-related courses. How
do we assess whether the students have acquired the right objectoriented
skills after they have completed their OO courses? What are
object oriented skills? Currently none of the current assessment
techniques would be able to provide this answer. Traditional forms of
OO programming assessment provide a ways for assigning numerical
scores to determine letter grades. But this rarely reveals information
about how students actually understand OO concept. It appears
reasonable that a better understanding of how to define and assess
OO skills is needed by developing a criterion referenced model. It is
even critical in the context of Malaysia where there is currently a
growing concern over the level of competency of Malaysian IT
graduates in object oriented programming. This paper discussed the
approach used to develop the criterion-referenced assessment model.
The model can serve as a guideline when conducting OO
programming assessment as mentioned. The proposed model is
derived by using Goal Questions Metrics methodology, which helps
formulate the metrics of interest. It concluded with a few suggestions
for further study.