Abstract: The objective of this paper is to investigate a new
approach based on the idea of pictograms for food portion size. This
approach adopts the model of the United States Pharmacopeia- Drug
Information (USP-DI). The representation of each food portion size
composed of three parts: frame, the connotation of dietary portion
sizes and layout. To investigate users- comprehension based on this
approach, two experiments were conducted, included 122 Taiwanese
people, 60 male and 62 female with ages between 16 and 64 (divided
into age groups of 16-30, 31-45 and 46-64). In Experiment 1, the mean
correcting rate of the understanding level of food items is 48.54%
(S.D.= 95.08) and the mean response time 2.89sec (S.D.=2.14). The
difference on the correct rates for different age groups is significant
(P*=0.00
Abstract: WikID is a wiki for industrial design engineers. An
important aspect for the viability of a wiki is the loyalty of the user
community to share their information and knowledge by adding this
knowledge to the wiki. For the initiators of a wiki it is therefore
important to use every aspect to stimulate the user community to
actively participate. In this study the focus is on the styling of the
website. The central question is: How could the WikID website be
visually designed to achieve a user experience which will incite the
user to actively participate in the WikID community? After a
literature study on the influencing factors of a website, a new
interface has been designed by applying the rules found, in order to
expand this website-s active user community. An online
questionnaire regarding the old or the new website gave insights in
the opinions of users. As expected, the new website was rated more
positively than the old website. However, the differences are limited.
Abstract: The paper describes ergonomics problems trend of
student at B5101 classroom building 2, Suranaree University of
Technology. The objective to survey ergonomics problems and effect
from use chairs for sitting in class room. The result from survey
method 100 student they use lecture chair for sitting in classroom
more than 2 hours/ day by RULA[1]. and Body discomfort survey[2].
The result from Body discomfort survey contribute fatigue problems
at neck, lower back, upper back and right shoulder 2.93, 2.91, 2.33,
1.75 respectively and result from RULA contribute fatigue problems
at neck, body and right upper arm 4.00, 3.75 and 3.00 respectively
are consistent. After that the researcher provide improvement plan
for design new chair support student fatigue reduction by prepare
data of sample anthropometry and design ergonomics chair prototype
3 unit. Then sample 100 student trial to use new chair and evaluate
again by RULA, Body discomfort and satisfaction. The result from
trial new chair after improvement by RULA present fatigue reduction
average of head and neck from 4.00 to 2.25 , body and trunk from
3.75 to 2.00 and arm force from 1.00 to 0.25 respectively. The result
from trial new chair after improvement by Body discomfort present
fatigue reduction average of lower back from 2.91 to 0.87, neck from
2.93 to 1.24, upper back 2.33 to 0.84 and right upper arm from 1.75
to 0.74. That statistical of RULA and Body discomfort survey
present fatigue reduction after improvement significance with a
confidence level of 95% (p-value 0.05). When analyzing the
relationship of fatigue as part of the body by Chi – square test during
RULA and Body discomfort that before and after improvements were
consistent with the significant level of confidence 95% (p-value 0.05)
. Moreover the students satisfaction result from trial with a new chair
for 30 minutes [3]. 72 percent very satisfied of the folding of the
secondary writing simple 66% the width of the writing plate, 64% the
suitability of the writing plate, 62% of soft seat cushion and 61%
easy to seat the chair.
Abstract: Currently, most of distance learning courses can only
deliver standard material to students. Students receive course content
passively which leads to the neglect of the goal of education – “to suit
the teaching to the ability of students". Providing appropriate course
content according to students- ability is the main goal of this paper.
Except offering a series of conventional learning services, abundant
information available, and instant message delivery, a complete online
learning environment should be able to distinguish between students-
ability and provide learning courses that best suit their ability.
However, if a distance learning site contains well-designed course
content and design but fails to provide adaptive courses, students will
gradually loss their interests and confidence in learning and result in
ineffective learning or discontinued learning. In this paper, an
intelligent tutoring system is proposed and it consists of several
modules working cooperatively in order to build an adaptive learning
environment for distance education. The operation of the system is
based on the result of Self-Organizing Map (SOM) to divide students
into different groups according to their learning ability and learning
interests and then provide them with suitable course content.
Accordingly, the problem of information overload and internet traffic
problem can be solved because the amount of traffic accessing the
same content is reduced.
Abstract: The decision of information technology (IT) outsourcing requires close attention to the evaluation of supplier selection process because the selection decision involves conflicting multiple criteria and is replete with complex decision making problems. Selecting the most appropriate suppliers is considered an important strategic decision that may impact the performance of outsourcing engagements. The objective of this paper is to aid decision makers to evaluate and assess possible IT outsourcing suppliers. An axiomatic design based fuzzy group decision making is adopted to evaluate supplier alternatives. Finally, a case study is given to demonstrate the potential of the methodology. KeywordsIT outsourcing, Supplier selection, Multi-criteria decision making, Axiomatic design, Fuzzy logic.
Abstract: Supply network management adopts a systematic
and integrative approach to managing the operations and
relationships of various parties in a supply network. The objective
of the manufactures in their supply network is to reduce inventory
costs and increase customer satisfaction levels. One way of doing
that is to synchronize delivery performance. A supply network can
be described by nodes representing the companies and the links
(relationships) between these nodes. Uncertainty in delivery time
depends on type of network relationship between suppliers. The
problem is to understand how the individual uncertainties influence
the total uncertainty of the network and identify those parts of the
network, which has the highest potential for improving the total
delivery time uncertainty.
Abstract: In view of growing competition in the service sector,
services are as much in need of modeling, analysis and improvement
as business or working processes. Graphical process models are
important means to capture process-related know-how for an
effective management of the service process. In this contribution, a
human performance analysis of process model development paying
special attention to model development time and the working method
was conducted. It was found that modelers with higher application
experience need significantly less time for mental activities than
modelers with lower application experience, spend more time on
labeling graphical elements, and achieved higher process model
quality in terms of activity label quality.
Abstract: By systematically applying different engineering
methods, difficult financial problems become approachable. Using a
combination of theory and techniques such as wavelet transform,
time series data mining, Markov chain based discrete stochastic
optimization, and evolutionary algorithms, this work formulated a
strategy to characterize and forecast non-linear time series. It
attempted to extract typical features from the volatility data sets of
S&P100 and S&P500 indices that include abrupt drops, jumps and
other non-linearity. As a result, accuracy of forecasting has reached
an average of over 75% surpassing any other publicly available
results on the forecast of any financial index.
Abstract: IPsec has now become a standard information security
technology throughout the Internet society. It provides a well-defined
architecture that takes into account confidentiality, authentication,
integrity, secure key exchange and protection mechanism against
replay attack also. For the connectionless security services on packet
basis, IETF IPsec Working Group has standardized two extension
headers (AH&ESP), key exchange and authentication protocols. It is
also working on lightweight key exchange protocol and MIB's for
security management. IPsec technology has been implemented on
various platforms in IPv4 and IPv6, gradually replacing old
application-specific security mechanisms. IPv4 and IPv6 are not
directly compatible, so programs and systems designed to one
standard can not communicate with those designed to the other. We
propose the design and implementation of controlled Internet security
system, which is IPsec-based Internet information security system in
IPv4/IPv6 network and also we show the data of performance
measurement. With the features like improved scalability and
routing, security, ease-of-configuration, and higher performance of
IPv6, the controlled Internet security system provides consistent
security policy and integrated security management on IPsec-based
Internet security system.
Abstract: In this paper the application of rule mining in order to
review the effective factors on supplier selection is reviewed in the
following three sections 1) criteria selecting and information
gathering 2) performing association rule mining 3) validation and
constituting rule base. Afterwards a few of applications of rule base
is explained. Then, a numerical example is presented and analyzed
by Clementine software. Some of extracted rules as well as the
results are presented at the end.
Abstract: Creativity is often based on an unorthodox
recombination of knowledge; in fact: 80% of all innovations use
given knowledge and put it into a new combination. Cross-industry
innovations follow this way of thinking and bring together problems
and solution ideas from different industries. Therefore analogies and
search strategies have to be developed. Taking this path, the
questions where to search, what to search and how to search have to
be answered. Afterwards, the gathered information can be used
within a planned search process. Identified solution ideas have to be
assessed and analyzed in detail for the success promising adaption
planning.
Abstract: Single Minute Exchange of Dies (SMED) mainly focuses on recognition of internal and external activities. It is concerned particularly with transferring internal activities into external ones in as many numbers as possible, by also minimizing the internal ones. The validity of the method and procedures are verified by an application a Styrofoam manufacturing process where setup times are critical for time reduction. Significant time savings have been achieved with minimum investment. Further, the issues related with employer safety and ergonomics principles during die exchange are noted.
Abstract: In the paper we discuss the influence of the route
flexibility degree, the open rate of operations and the production type
coefficient on makespan. The flexible job-open shop scheduling
problem FJOSP (an extension of the classical job shop scheduling) is
analyzed. For the analysis of the production process we used a
hybrid heuristic of the GRASP (greedy randomized adaptive search
procedure) with simulated annealing algorithm. Experiments with
different levels of factors have been considered and compared. The
GRASP+SA algorithm has been tested and illustrated with results for
the serial route and the parallel one.
Abstract: Most papers model Joint Replenishment Problem
(JRP) as a (kT,S) where kT is a multiple value for a common review
period T,and S is a predefined order up to level. In general the (T,S)
policy is characterized by a long out of control period which requires
a large amount of safety stock compared to the (R,Q) policy. In this
paper a probabilistic model is built where an item, call it item(i),
with the shortest order time between interval (T)is modeled under
(R,Q) policy and its inventory is continuously reviewed, while the
rest of items (j) are periodically reviewed at a definite time
corresponding to item
Abstract: Consider a mass production of HDD arms where
hundreds of CNC machines are used to manufacturer the HDD arms.
According to an overwhelming number of machines and models of
arm, construction of separate control chart for monitoring each HDD
arm model by each machine is not feasible. This research proposed a
strategy to optimize the SPC management on shop floor. The
procedure started from identifying the clusters of the machine with
similar manufacturing performance using clustering technique. The
three way control chart ( I - MR - R ) is then applied to each
clustered group of machine. This proposed research has
advantageous to the manufacturer in terms of not only better
performance of the SPC but also the quality management paradigm.
Abstract: Radio Frequency Identification (RFID) system is
looked upon as one of the top ten important technologies in the 20th
century and find its applications in many fields such as car industry.
The intelligent cars are one important part of this industry and always
try to find new and satisfied intelligent cars. The purpose of this
paper is to introduce an intelligent car with the based of RFID. By
storing the moving control commands such as turn right, turn left,
speed up and speed down etc. into the RFID tags beforehand and
sticking the tags on the tracks Car can read the moving control
commands from the tags and accomplish the proper actions.
Abstract: In this paper a Pattern Recognition algorithm based on
a constrained version of the k-means clustering algorithm will be
presented. The proposed algorithm is a non parametric supervised
statistical pattern recognition algorithm, i.e. it works under very mild
assumptions on the dataset. The performance of the algorithm will
be tested, togheter with a feature extraction technique that captures
the information on the closed two-dimensional contour of an image,
on images of industrial mineral ores.
Abstract: The need for Information Security in organizations, regardless of their type and size, is being addressed by emerging standards and recommended best practices. The various standards and practices which evolved in recent years and are still being developed and constantly revised, address the issue of Information Security from different angles. This paper attempts to provide an overview of Information Security Standards and Practices by briefly discussing some of the most popular ones. Through a comparative study of their similarities and differences, some insight can be obtained on how their combination may lead to an increased level of Information Security.
Abstract: Nowadays the market for industrial companies is becoming more and more globalized and highly competitive, forcing them to shorten the duration of the manufacturing system development time in order to reduce the time to market. In order to achieve this target, the hierarchical systems used in previous manufacturing systems are not enough because they cannot deal effectively with unexpected situations. To achieve flexibility in manufacturing systems, the concept of an Autonomous Decentralized Flexible Manufacturing System (AD-FMS) is useful. In this paper, we introduce a hypothetical reasoning based algorithm called the Algorithm for Future Anticipative Reasoning (AFAR) which is able to decide on a conceivable next action of an Automated Guided Vehicle (AGV) that works autonomously in the AD-FMS.
Abstract: Due to the growing dynamic and complexity within
the market environment production enterprises in particular are faced
with new logistic challenges. Moreover, it is here in this dynamic
environment that the Logistic Operating Curve Theory also reaches
its limits as a method for describing the correlations between the
logistic objectives. In order to convert this theory into a method for
dynamically monitoring productions this paper will introduce
methods for reliably and quickly identifying structural changes
relevant to logistics.