Abstract: the objective of this study is to measure the levels of
cellulas activity of ostrich GI microorganisms, and comparing it with
the levels of cellulas activity of rumen-s microorganisms, and also to
estimate the probability of increasing enzyme activity with injecting
different dosages (30%, 50% and 70%) of pure anaerobic goat rumen
fungi. The experiment was conducted in laboratory and under a
complete anaerobic condition (in vitro condition). 40 ml of
“CaldWell" medium and 1.4g wheat straw were placed in incubator
for an hour. The cellulase activity of ostrich microorganisms was
compared with other treatments, and then different dosages (30%,
50% and 70%) of pure anaerobic goat rumen fungi were injected to
ostrich microorganism-s media. Due to the results, cattle and goat
with 2.13 and 2.08 I.U (international units) respectively showed the
highest activity and ostrich with 0.91 (I.U) had the lowest cellulose
activity (p < 0.05). Injecting 30% and 50% of anaerobic fungi had no
significant incensement in enzyme activity, but with injecting 70% of
rumen fungi to ostrich microorganisms culture a significant increase
was observed 1.48 I.U. (p < 0.05).
Abstract: Since the last two decades, container transportation
system has been faced under increasing development. This fact
shows the importance of container transportation system as a key role
of container terminals to link between sea and land. Therefore, there
is a continuous need for the optimal use of equipment and facilities in
the ports. Regarding the complex structure of container ports, this
paper presents a simulation model that compares tow storage
strategies for storing containers in the yard. For this purpose, we
considered loading and unloading norm as an important criterion to
evaluate the performance of Shahid Rajaee container port. By
analysing the results of the model, it will be shown that using
marshalling yard policy instead of current storage system has a
significant effect on the performance level of the port and can
increase the loading and unloading norm up to 14%.
Abstract: The problems associated with wind predictions of
WAsP model in complex terrain are already the target of several
studies in the last decade. In this paper, the influence of surrounding
orography on accuracy of wind data analysis of a train is
investigated. For the case study, a site with complex surrounding
orography is considered. This site is located in Manjil, one of the
windiest cities of Iran. For having precise evaluation of wind regime
in the site, one-year wind data measurements from two metrological
masts are used. To validate the obtained results from WAsP, the
cross prediction between each mast is performed. The analysis
reveals that WAsP model can estimate the wind speed behavior
accurately. In addition, results show that this software can be used
for predicting the wind regime in flat sites with complex surrounding
orography.
Abstract: Medical applications are among the most impactful
areas of microrobotics. The ultimate goal of medical microrobots is
to reach currently inaccessible areas of the human body and carry out
a host of complex operations such as minimally invasive surgery
(MIS), highly localized drug delivery, and screening for diseases at
their very early stages. Miniature, safe and efficient propulsion
systems hold the key to maturing this technology but they pose
significant challenges. A new type of propulsion developed recently,
uses multi-flagella architecture inspired by the motility mechanism of
prokaryotic microorganisms. There is a lack of efficient methods for
designing this type of propulsion system. The goal of this paper is to
overcome the lack and this way, a numerical strategy is proposed to
design multi-flagella propulsion systems. The strategy is based on the
implementation of the regularized stokeslet and rotlet theory, RFT
theory and new approach of “local corrected velocity". The effects of
shape parameters and angular velocities of each flagellum on overall
flow field and on the robot net forces and moments are considered.
Then a multi-layer perceptron artificial neural network is designed
and employed to adjust the angular velocities of the motors for
propulsion control. The proposed method applied successfully on a
sample configuration and useful demonstrative results is obtained.
Abstract: This paper presents a novel method for prediction of
the mechanical behavior of proximal femur using the general
framework of the quantitative computed tomography (QCT)-based
finite element Analysis (FEA). A systematic imaging and modeling
procedure was developed for reliable correspondence between the
QCT-based FEA and the in-vitro mechanical testing. A speciallydesigned
holding frame was used to define and maintain a unique
geometrical reference system during the analysis and testing. The
QCT images were directly converted into voxel-based 3D finite
element models for linear and nonlinear analyses. The equivalent
plastic strain and the strain energy density measures were used to
identify the critical elements and predict the failure patterns. The
samples were destructively tested using a specially-designed gripping
fixture (with five degrees of freedom) mounted within a universal
mechanical testing machine. Very good agreements were found
between the experimental and the predicted failure patterns and the
associated load levels.
Abstract: Animated graph gives some good impressions in
presenting information. However, not many people are able to produce it because the process of generating an animated graph requires some technical skills. This work presents Content
Management System with Animated Graph (CMS-AG). It is a webbased system enabling users to produce an effective and interactive
graphical report in a short time period. It allows for three levels of user authentication, provides update profile, account management, template management, graph management, and track changes. The system development applies incremental development approach, object-oriented concepts and Web programming technologies. The design architecture promotes new technology of reporting. It also helps user cut off unnecessary expenses, save time and learn new things on different levels of users. In this paper, the developed system is described.
Abstract: Horizontal wells are proven to be better producers
because they can be extended for a long distance in the pay zone.
Engineers have the technical means to forecast the well productivity
for a given horizontal length. However, experiences have shown that
the actual production rate is often significantly less than that of
forecasted. It is a difficult task, if not impossible to identify the real
reason why a horizontal well is not producing what was forecasted.
Often the source of problem lies in the drilling of horizontal section
such as permeability reduction in the pay zone due to mud invasion
or snaky well patterns created during drilling. Although drillers aim
to drill a constant inclination hole in the pay zone, the more frequent
outcome is a sinusoidal wellbore trajectory. The two factors, which
play an important role in wellbore tortuosity, are the inclination and
side force at bit. A constant inclination horizontal well can only be
drilled if the bit face is maintained perpendicular to longitudinal axis
of bottom hole assembly (BHA) while keeping the side force nil at
the bit. This approach assumes that there exists no formation force at
bit. Hence, an appropriate BHA can be designed if bit side force and
bit tilt are determined accurately. The Artificial Neural Network
(ANN) is superior to existing analytical techniques. In this study, the
neural networks have been employed as a general approximation tool
for estimation of the bit side forces. A number of samples are
analyzed with ANN for parameters of bit side force and the results
are compared with exact analysis. Back Propagation Neural network
(BPN) is used to approximation of bit side forces. Resultant low
relative error value of the test indicates the usability of the BPN in
this area.
Abstract: EEG signal is one of the oldest measures of brain
activity that has been used vastly for clinical diagnoses and
biomedical researches. However, EEG signals are highly
contaminated with various artifacts, both from the subject and from
equipment interferences. Among these various kinds of artifacts,
ocular noise is the most important one. Since many applications such
as BCI require online and real-time processing of EEG signal, it is
ideal if the removal of artifacts is performed in an online fashion.
Recently, some methods for online ocular artifact removing have
been proposed. One of these methods is ARMAX modeling of EEG
signal. This method assumes that the recorded EEG signal is a
combination of EOG artifacts and the background EEG. Then the
background EEG is estimated via estimation of ARMAX parameters.
The other recently proposed method is based on adaptive filtering.
This method uses EOG signal as the reference input and subtracts
EOG artifacts from recorded EEG signals. In this paper we
investigate the efficiency of each method for removing of EOG
artifacts. A comparison is made between these two methods. Our
undertaken conclusion from this comparison is that adaptive filtering
method has better results compared with the results achieved by
ARMAX modeling.
Abstract: A lot of matching algorithms with different characteristics have been introduced in recent years. For real time systems these algorithms are usually based on minutiae features. In this paper we introduce a novel approach for feature extraction in which the extracted features are independent of shift and rotation of the fingerprint and at the meantime the matching operation is performed much more easily and with higher speed and accuracy. In this new approach first for any fingerprint a reference point and a reference orientation is determined and then based on this information features are converted into polar coordinates. Due to high speed and accuracy of this approach and small volume of extracted features and easily execution of matching operation this approach is the most appropriate for real time applications.
Abstract: This paper considers the (2+1)-dimensional breaking soliton equation in its bilinear form. Some exact solutions to this equation are explicitly derived by the idea of three-wave solution method with the assistance of Maple. We can see that the new idea is very simple and straightforward.
Abstract: Shirvan is located in plain in Northern Khorasan province north east of Iran and has semiarid to temperate climate. To investigate the annual changes in some qualitative parameters such as electrical conductivity, total dissolved solids and chloride concentrations which have increased during ten continuous years. Fourteen groundwater sources including deep as well as semi-deep wells were sampled and were analyzed using standard methods. The trends of obtained data were analyzed during these years and the effects of different factors on the changes in electrical conductivity, concentration of chloride and total dissolved solids were clarified. The results showed that the amounts of some qualitative parameters have been increased during 10 years time which has led to decrease in water quality. The results also showed that increased in urban populations as well as extensive industrialization in the studied area are the most important reasons to influence underground water quality. Furthermore decrease in water quantity is also evident due to more water utilization and occurrence of recent droughts in the region during recent years.
Abstract: Heavy metals have bad effects on environment and
soils and it can uptake by natural HAP .natural Hap is an inexpensive
material that uptake large amounts of various heavy metals like Zn
(II) .Natural HAP (N-HAP), extracted from bovine cortical bone ash,
is a good choice for substitution of commercial HAP. Several
experiments were done to investigate the sorption capacity of Zn (II)
to N-HAP in various particles sizes, temperatures, initial
concentrations, pH and reaction times. In this study, the sorption of
Zinc ions from a Zn solution onto HAP particles with sizes of 1537.6
nm and 47.6 nm at three initial pH values of 4.50, 6.00 and 7.50 was
studied. The results showed that better performance was obtained
through a 47.6 nm particle size and higher pH values. The
experimental data were analyzed using Langmuir, Freundlich, and
Arrhenius equations for equilibrium, kinetic and thermodynamic
studies. The analysis showed a maximum adsorption capacity of NHAP
as being 1.562 mmol/g at a pH of 7.5 and small particle size.
Kinetically, the prepared N-HAP is a feasible sorbent that retains Zn
(II) ions through a favorable and spontaneous sorption process.
Abstract: The principal purpose of this article is to present a new method based on Adaptive Neural Network Fuzzy Inference System (ANFIS) to generate additional artificial earthquake accelerograms from presented data, which are compatible with specified response spectra. The proposed method uses the learning abilities of ANFIS to develop the knowledge of the inverse mapping from response spectrum to earthquake records. In addition, wavelet packet transform is used to decompose specified earthquake records and then ANFISs are trained to relate the response spectrum of records to their wavelet packet coefficients. Finally, an interpretive example is presented which uses an ensemble of recorded accelerograms to demonstrate the effectiveness of the proposed method.
Abstract: Regarding the multi-media property of internet and the facilities that can be provided for the users, the purpose of this paper is to investigate the users- behavioral patterns and the impact of internet on taboos of marriage. For this purpose a survey technique on the sample size amounted 403 students of governmental guidance schools of city of Mashhad in country of Iran were considered. The results showed, the process of using various internet environments depends on the degree of the users- familiarity with these sites. In order to clarify the effects of the Internet on the taboos of marriage, the non – internet parameters also considered to be controlled. The ttest held among the internet users and non-users, indicated that internet users possess lower taboos of marriage. Extraction of the effects of internet via considering the effects of non-internet parameters, indicate that addiction to the internet, creating a cordial atmosphere, emotional communication, and message attractive factors have significant effects on the family's traditional values.
Abstract: Both image steganography and image encryption have
advantages and disadvantages. Steganograhy allows us to hide a
desired image containing confidential information in a covered or
host image while image encryption is decomposing the desired image
to a non-readable, non-comprehended manner. The encryption
methods are usually much more robust than the steganographic ones.
However, they have a high visibility and would provoke the attackers
easily since it usually is obvious from an encrypted image that
something is hidden! The combination of steganography and
encryption will cover both of their weaknesses and therefore, it
increases the security. In this paper an image encryption method
based on sinc-convolution along with using an encryption key of 128
bit length is introduced. Then, the encrypted image is covered by a
host image using a modified version of JSteg steganography
algorithm. This method could be applied to almost all image formats
including TIF, BMP, GIF and JPEG. The experiment results show
that our method is able to hide a desired image with high security and
low visibility.
Abstract: In recent years, “Bottom-up Planning Approach" has been widely accepted and expanded from planning theorists. Citizen participation becomes more important in decision-making in informal settlements. Many of previous projects and strategies due to ignorance of citizen participation, have been failed facing with informal settlements and in some cases lead physical expansion of these neighbourhoods. According to recent experiences, the new participatory approach was in somehow successful. This paper focuses on local experiences in Iran. A considerable amount of people live in informal settlements in Iran. With the previous methods, the government could not solve the problems of these settlements. It is time to examine new methods such as empowerment of the local citizens and involve them to solve the current physical, social, and economic problems. The paper aims to address the previous and new strategies facing with informal settlements, the conditions under which citizens could be involved in planning process, limits and potentials of this process, the main actors and issues and finally motivations that are able to promote citizen participation. Documentary studies, observation, interview and questionnaire have been used to achieve the above mentioned objectives. Nearly 80 percent of responder in Saadi Community are ready to participate in regularising their neighbourhoods, if pre-conditions of citizen involvement are being provided. These pre-conditions include kind of problem and its severity, the importance of issue, existence of a short-term solution, etc. Moreover, confirmation of dweller-s ownership can promote the citizen engagement in participatory projects.
Abstract: In this paper, the babbitting of a bearing in boiler feed pump of an electromotor has been studied. These bearings have an important role in reducing the shut down times in the pumps, compressors and turbines. The most conventional method in babbitting is casting as a melting method. The comparison between thermal spray and casting methods in babbitting shows that the thermal spraying babbitt layer has better performance and tribological behavior. The metallurgical and tribological analysis such as SEM, EDS and wet chemical analysis has been made in the Babbitt alloys and worn surfaces. Two type of babbitt materials: tinbase and lead-base babbitt was used. The benefits of thermally sprayed babbitt layers are completely clear especially in large bearings.
Abstract: Titanium dioxide coatings were deposited by utilizing
atmospheric plasma spraying (APS) system. The agglomerated nanopowder
and different spraying parameters were used to determine
their influences on the microstructure surface feature and photoabsorption
of the coatings. The microstructure of as-sprayed TiO2
coatings were characterized by scanning electron microscope (SEM).
Surface characteristics were investigated by Fourier Transform
Infrared (FT-IR). The photo absorption was determined by UV-VIS
spectrophotometer. It is found that the spray parameters have an
influence on the microstructure, surface feature and photo-absorption
of the TiO2 coatings.
Abstract: Fuzzy Cognitive Maps (FCMs) have successfully
been applied in numerous domains to show relations between
essential components. In some FCM, there are more nodes, which
related to each other and more nodes means more complex in system
behaviors and analysis. In this paper, a novel learning method used to
construct FCMs based on historical data and by using data mining
and DEMATEL method, a new method defined to reduce nodes
number. This method cluster nodes in FCM based on their cause and
effect behaviors.
Abstract: Protection of slope and embankment from erosion has
become an important issue in Bangladesh. The constructions of
strong structures require large capital, integrated designing, high
maintenance cost. Strong structure methods have negative impact on
the environment and sometimes not function for the design period.
Plantation of vetiver system along the slopes is an alternative
solution. Vetiver not only serves the purpose of slope protection but
also adds green environment reducing pollution. Vetiver is available
in almost all the districts of Bangladesh. This paper presents the
application of vetiver system with geo-jute, for slope protection and
erosion control of embankments and slopes. In-situ shear tests have
been conducted on vetiver rooted soil system to find the shear
strength. The shear strength and effective soil cohesion of vetiver
rooted soil matrix are respectively 2.0 times and 2.1 times higher than
that of the bared soil. Similar trends have been found in direct shear
tests conducted on laboratory reconstituted samples. Field trials have
been conducted in road embankment and slope protection with
vetiver at different sites. During the time of vetiver root growth the
soil protection has been accomplished by geo-jute. As the geo-jute
degrades with time, vetiver roots grow and take over the function of
geo-jutes. Slope stability analyses showed that vegetation increase
the factor of safety significantly.