Abstract: Logistics outsourcing is a growing trend and measuring its performance, a challenge. It must be consistent with the objectives set for logistics outsourcing, but we have found no objective-based performance measurement system. We have conducted a comprehensive review of the specialist literature to cover this gap, which has led us to identify and define these objectives. The outcome is that we have obtained a list of the most relevant objectives and their descriptions. This will enable us to analyse in a future study whether the indicators used for measuring logistics outsourcing performance are consistent with the objectives pursued with the outsourcing. If this is not the case, a proposal will be made for a set of financial and operational indicators to measure performance in logistics outsourcing that take the goals being pursued into account.
Abstract: In this work, ionic liquids (ILs) for CO2 capturing in typical absorption/stripper process are considered. The use of ionic liquids is considered to be cost-effective because it requires less energy for solvent recovery compared to other conventional processes. A mathematical model is developed for the process based on Peng-Robinson (PR) equation of state (EoS) which is validated with experimental data for various solutions involving CO2. The model is utilized to study the sorbent and energy demand for three types of ILs at specific CO2 capturing rates. The energy demand is manifested by the vapor-liquid equilibrium temperature necessary to remove the captured CO2 from the used solvent in the regeneration step. It is found that higher recovery temperature is required for solvents with higher solubility coefficient. For all ILs, the temperature requirement is less than that required by the typical monoethanolamine (MEA) solvent. The effect of the CO2 loading in the sorbent stream on the process performance is also examined.
Abstract: Recently, wireless sensor networks have been paid
more interest, are widely used in a lot of commercial and military
applications, and may be deployed in critical scenarios (e.g. when a
malfunctioning network results in danger to human life or great
financial loss). Such networks must be protected against human
intrusion by using the secret keys to encrypt the exchange messages
between communicating nodes. Both the symmetric and asymmetric
methods have their own drawbacks for use in key management. Thus,
we avoid the weakness of these two cryptosystems and make use of
their advantages to establish a secure environment by developing the
new method for encryption depending on the idea of code
conversion. The code conversion-s equations are used as the key for
designing the proposed system based on the basics of logic gate-s
principals. Using our security architecture, we show how to reduce
significant attacks on wireless sensor networks.
Abstract: The investigating and assessing the effects of
relaxation training on the levels of state anxiety concerning first year
female nursing students at their initial experience in clinical setting.
This research is a quasi experimental study that was carried out in
nursing and midwifery faculty of Tehran university of medical
sciences .The sample of research consists 60 first term female
nursing students were selected through convenience and random
sampling. 30 of them were the experimental group and 30 of them
were in control group. The Instruments of data-collection has been a
questionnaire which consists of 3 parts. The first part includes 10
questions about demographic characteristics .the second part includes
20 question about anxiety (test 'Spielberg' ). The 3rd part includes
physiological indicators of anxiety (BP, P, R, body temperature). The
statistical tests included t-test and and fisher test, Data were
analyzed by SPSS software.
Abstract: The current paper conceptualizes the technique of
release consistency indispensable with the concept of
synchronization that is user-defined. Programming model concreted
with object and class is illustrated and demonstrated. The essence of
the paper is phases, events and parallel computing execution .The
technique by which the values are visible on shared variables is
implemented. The second part of the paper consist of user defined
high level synchronization primitives implementation and system
architecture with memory protocols. There is a proposition of
techniques which are core in deciding the validating and invalidating
a stall page .
Abstract: Cyber physical system (CPS) for target tracking, military surveillance, human health monitoring, and vehicle detection all require maximizing the utility and saving the energy. Sensor selection is one of the most important parts of CPS. Sensor selection problem (SSP) is concentrating to balance the tradeoff between the number of sensors which we used and the utility which we will get. In this paper, we propose a performance constrained slide windows (PCSW) based algorithm for SSP in CPS. we present results of extensive simulations that we have carried out to test and validate the PCSW algorithms when we track a target, Experiment shows that the PCSW based algorithm improved the performance including selecting time and communication times for selecting.
Abstract: Music has a great effect on human body and mind; it
can have a positive effect on hormone system. Objective of this study
is to analysis the effect of music (carnatic, hard rock and jazz) on
brain activity during mental work load using electroencephalography
(EEG). Eight healthy subjects without special musical education
participated in the study. EEG signals were acquired at frontal (Fz),
parietal (Pz) and central (Cz) lobes of brain while listening to music
at three experimental condition (rest, music without mental task and
music with mental task). Spectral powers features were extracted at
alpha, theta and beta brain rhythms. While listening to jazz music, the
alpha and theta powers were significantly (p < 0.05) high for rest as
compared to music with and without mental task in Cz. While
listening to Carnatic music, the beta power was significantly (p <
0.05) high for with mental task as compared to rest and music
without mental task at Cz and Fz location. This finding corroborates
that attention based activities are enhanced while listening to jazz and
carnatic as compare to Hard rock during mental task.
Abstract: Multimedia information availability has increased
dramatically with the advent of video broadcasting on handheld
devices. But with this availability comes problems of maintaining the
security of information that is displayed in public. ISMA Encryption
and Authentication (ISMACryp) is one of the chosen technologies for
service protection in DVB-H (Digital Video Broadcasting-
Handheld), the TV system for portable handheld devices. The
ISMACryp is encoded with H.264/AVC (advanced video coding),
while leaving all structural data as it is. Two modes of ISMACryp are
available; the CTR mode (Counter type) and CBC mode (Cipher
Block Chaining) mode. Both modes of ISMACryp are based on 128-
bit AES algorithm. AES algorithms are more complex and require
larger time for execution which is not suitable for real time
application like live TV. The proposed system aims to gain a deep
understanding of video data security on multimedia technologies and
to provide security for real time video applications using selective
encryption for H.264/AVC. Five level of security proposed in this
paper based on the content of NAL unit in Baseline Constrain profile
of H.264/AVC. The selective encryption in different levels provides
encryption of intra-prediction mode, residue data, inter-prediction
mode or motion vectors only. Experimental results shown in this
paper described that fifth level which is ISMACryp provide higher
level of security with more encryption time and the one level provide
lower level of security by encrypting only motion vectors with lower
execution time without compromise on compression and quality of
visual content. This encryption scheme with compression process
with low cost, and keeps the file format unchanged with some direct
operations supported. Simulation was being carried out in Matlab.
Abstract: This paper addresses one important aspect of
combustion system analysis, the spray evaporation and
dispersion modeling. In this study we assume an empty
cylinder which is as a simulator for a ramjet engine and the
cylinder has been studied by cold flow. Four nozzles have the
duties of injection which are located in the entrance of
cylinder. The air flow comes into the cylinder from one side
and injection operation will be done. By changing injection
velocity and entrance air flow velocity, we have studied
droplet sizing and efficient mass fraction of fuel vapor near
and at the exit area. We named the mass of fuel vapor inside
the flammability limit as the efficient mass fraction. Further,
we decreased the initial temperature of fuel droplets and we
have repeated the investigating again. To fulfill the calculation
we used a modified version of KIVA-3V.
Abstract: There are many situations where input feature vectors are incomplete and methods to tackle the problem have been studied for a long time. A commonly used procedure is to replace each missing value with an imputation. This paper presents a method to perform categorical missing data imputation from numerical and categorical variables. The imputations are based on Simpson-s fuzzy min-max neural networks where the input variables for learning and classification are just numerical. The proposed method extends the input to categorical variables by introducing new fuzzy sets, a new operation and a new architecture. The procedure is tested and compared with others using opinion poll data.
Abstract: Academic research information service is a must for surveying previous studies in research and development process. OntoFrame is an academic research information service under Semantic Web framework different from simple keyword-based services such as CiteSeer and Google Scholar. The first purpose of this study is for revealing user behavior in their surveys, the objects of using academic research information services, and their needs. The second is for applying lessons learned from the results to OntoFrame.
Abstract: The principle concern of this paper is to determine the
impact of solar absorption coefficient of external wall on building
energy consumption. Simulations were carried out on a typical
residential building by using the simulation Toolkit DeST-h. Results
show that reducing solar absorption coefficient leads to a great
reduction in building energy consumption and thus light-colored
materials are suitable.
Abstract: Stable nonzero populations without random deaths
caused by the Verhulst factor (Verhulst-free) are a rarity. Majority
either grow without bounds or die of excessive harmful mutations.
To delay the accumulation of bad genes or diseases, a new
environmental parameter Γ is introduced in the simulation. Current
results demonstrate that stability may be achieved by setting Γ = 0.1.
These steady states approach a maximum size that scales inversely
with reproduction age.
Abstract: The work we have accomplished in implementing a
Mobile Payment mechanism that enables customers to pay bills for
groceries and other purchased items in a store through the means of a
mobile phone, specifically a Smartphone. The mode of transaction, as
far as communication between the customer-s handset and the
merchant-s POS is concerned, we have decided upon NFC (Near
Field Communication). This is due to the fact that for the most part,
Pakistani Smartphone users have handsets that have Android mobile
OS, which supports the aforementioned platform, IOS, on the other
hand does not.
Abstract: In this paper, the hardware implementation of the
RSA public-key cryptographic algorithm is presented. The RSA
cryptographic algorithm is depends on the computation of repeated
modular exponentials.
The Montgomery algorithm is used and modified to reduce
hardware resources and to achieve reasonable operating speed for
FPGA. An efficient architecture for modular multiplications based on
the array multiplier is proposed. We have implemented a RSA
cryptosystem based on Montgomery algorithm. As a result, it is
shown that proposed architecture contributes to small area and
reasonable speed.
Abstract: The principal focus of this study is on the
measurement and analysis of labor learnings in Pakistan. The study
at the aggregate economy level focus on the labor productivity
movements and at large-scale manufacturing level focus on the cost
structure, with isolating the contribution of the learning curve. The
analysis of S-shaped curve suggests that learnings are only below one
half of aggregate learning curve and other half shows the retardation
in learning, hence retardation in productivity movements. The study
implies the existence of learning economies in term of cost reduction
that is input cost per unit produced decreases by 0.51 percent every
time the cumulative production output doubles.
Abstract: Experimental data from an atmospheric air/water terrain slugging case has been made available by the Shell Amsterdam research center, and has been subject to numerical simulation and comparison with a one-dimensional two-phase slug tracking simulator under development at the Norwegian University of Science and Technology. The code is based on tracking of liquid slugs in pipelines by use of a Lagrangian grid formulation implemented in Cµ by use of object oriented techniques. An existing hybrid spatial discretization scheme is tested, in which the stratified regions are modelled by the two-fluid model. The slug regions are treated incompressible, thus requiring a single momentum balance over the whole slug. Upon comparison with the experimental data, the period of the simulated severe slugging cycle is observed to be sensitive to slug generation in the horizontal parts of the system. Two different slug initiation methods have been tested with the slug tracking code, and grid dependency has been investigated.
Abstract: The review performed on the condition of energy
consumption & rate in Iran, shows that unfortunately the subject of
optimization and conservation of energy in active industries of
country lacks a practical & effective method and in most factories,
the energy consumption and rate is more than in similar industries of
industrial countries. The increasing demand of electrical energy and
the overheads which it imposes on the organization, forces
companies to search for suitable approaches to optimize energy
consumption and demand management. Application of value
engineering techniques is among these approaches. Value
engineering is considered a powerful tool for improving profitability.
These tools are used for reduction of expenses, increasing profits,
quality improvement, increasing market share, performing works in
shorter durations, more efficient utilization of sources & etc.
In this article, we shall review the subject of value engineering and
its capabilities for creating effective transformations in industrial
organizations, in order to reduce energy costs & the results have
been investigated and described during a case study in Mazandaran
wood and paper industries, the biggest consumer of energy in north
of Iran, for the purpose of presenting the effects of performed tasks
in optimization of energy consumption by utilizing value engineering
techniques in one case study.
Abstract: In this study, the Taguchi method was used to optimize the effect of HALO structure or halo implant variations on threshold voltage (VTH) and leakage current (ILeak) in 45nm p-type Metal Oxide Semiconductor Field Effect Transistors (MOSFETs) device. Besides halo implant dose, the other process parameters which used were Source/Drain (S/D) implant dose, oxide growth temperature and silicide anneal temperature. This work was done using TCAD simulator, consisting of a process simulator, ATHENA and device simulator, ATLAS. These two simulators were combined with Taguchi method to aid in design and optimize the process parameters. In this research, the most effective process parameters with respect to VTH and ILeak are halo implant dose (40%) and S/D implant dose (52%) respectively. Whereas the second ranking factor affecting VTH and ILeak are oxide growth temperature (32%) and halo implant dose (34%) respectively. The results show that after optimizations approaches is -0.157V at ILeak=0.195mA/μm.
Abstract: RFID (Radio Frequency IDentification) system has
been widely used in our life, such as transport systems, passports,
automotive, animal tracking, human implants, library, and so on.
However, the RFID authentication protocols between RF (Radio
Frequency) tags and the RF readers have been bring about various
privacy problems that anonymity of the tags, tracking, eavesdropping,
and so on. Many researchers have proposed the solution of the
problems. However, they still have the problem, such as location
privacy, mutual authentication. In this paper, we show the problems of
the previous protocols, and then we propose a more secure and
efficient RFID authentication protocol.