Abstract: The client server systems using mobile
communications networks for data transmission became very
attractive for many economic agents, in the purpose of promoting and
offering electronic services to their clients. E-services are suitable for
business developing and financial benefits increasing. The products
or services can be efficiently delivered to a large number of clients,
using mobile Internet access technologies. The clients can have
access to e-services, anywhere and anytime, with the support of 3G,
GPRS, WLAN, etc., channels bandwidth, data services and protocols.
Based on the mobile communications networks evolution and
development, a convergence of technological and financial interests
of mobile operators, software developers, mobile terminals producers
and e-content providers is established. These will lead to a high level
of integration of IT&C resources and will facilitate the value added
services delivery through the mobile communications networks. In
this paper it is presented a client server system, for e-services access,
with Smartphones and PDA-s mobile software applications, installed
on Symbian and Windows Mobile operating systems.
Abstract: According to the density of the chips, designers are
trying to put so any facilities of computational and storage on single
chips. Along with the complexity of computational and storage
circuits, the designing, testing and debugging become more and more
complex and expensive. So, hardware design will be built by using
very high speed hardware description language, which is more
efficient and cost effective. This paper will focus on the
implementation of 32-bit ALU design based on Verilog hardware
description language. Adder and subtracter operate correctly on both
unsigned and positive numbers. In ALU, addition takes most of the
time if it uses the ripple-carry adder. The general strategy for
designing fast adders is to reduce the time required to form carry
signals. Adders that use this principle are called carry look- ahead
adder. The carry look-ahead adder is to be designed with combination
of 4-bit adders. The syntax of Verilog HDL is similar to the C
programming language. This paper proposes a unified approach to
ALU design in which both simulation and formal verification can
co-exist.
Abstract: A high performance thin layer chromatography
system (HPTLC) for the separation of vitamin B2 and B12 has been
developed. The separation was successfully using a solvent system of
methanol, water, ammonia 7.3.1 (V/V) as mobile phase on HPTLC
plates impregnated with boric acid. The effect of other mobile phases
on the separation of vitamins was also examined. The method is
based on different behavior of investigated compounds in
impregnated TLC plates with different amount of boric acid. The Rf
values of vitamin B2 and B12 are considered on non impregnated
and impregnated silica gel HPTLC plate with boric acid. The effect
of boric acid in the mobile phase and on HPTLC plates on the RF
values of the vitamins has also been studied.
Abstract: In an open real-time system environment, the coexistence of different kinds of real-time and non real-time applications makes the system scheduling mechanism face new requirements and challenges. One two-level scheduling scheme of the open real-time systems is introduced, and points out that hard and soft real-time applications are scheduled non-distinctively as the same type real-time applications, the Quality of Service (QoS) cannot be guaranteed. It has two flaws: The first, it can not differentiate scheduling priorities of hard and soft real-time applications, that is to say, it neglects characteristic differences between hard real-time applications and soft ones, so it does not suit a more complex real-time environment. The second, the worst case execution time of soft real-time applications cannot be predicted exactly, so it is not worth while to cost much spending in order to assure all soft real-time applications not to miss their deadlines, and doing that may cause resource wasting. In order to solve this problem, a novel two-level real-time scheduling mechanism (including scheduling profile and scheduling algorithm) which adds the process of dealing with soft real-time applications is proposed. Finally, we verify real-time scheduling mechanism from two aspects of theory and experiment. The results indicate that our scheduling mechanism can achieve the following objectives. (1) It can reflect the difference of priority when scheduling hard and soft real-time applications. (2) It can ensure schedulability of hard real-time applications, that is, their rate of missing deadline is 0. (3) The overall rate of missing deadline of soft real-time applications can be less than 1. (4) The deadline of a non-real-time application is not set, whereas the scheduling algorithm that server 0 S uses can avoid the “starvation" of jobs and increase QOS. By doing that, our scheduling mechanism is more compatible with different types of applications and it will be applied more widely.
Abstract: The group mutual exclusion (GME) problem is an
interesting generalization of the mutual exclusion problem. Several
solutions of the GME problem have been proposed for message
passing distributed systems. However, none of these solutions is
suitable for real time distributed systems. In this paper, we propose a
token-based distributed algorithms for the GME problem in soft real
time distributed systems. The algorithm uses the concepts of priority
queue, dynamic request set and the process state. The algorithm uses
first come first serve approach in selecting the next session type
between the same priority levels and satisfies the concurrent
occupancy property. The algorithm allows all n processors to be
inside their CS provided they request for the same session. The
performance analysis and correctness proof of the algorithm has also
been included in the paper.
Abstract: Model Predictive Control has been previously applied
to supply chain problems with promising results; however hitherto
proposed systems possessed no information on future demand. A
forecasting methodology will surely promote the efficiency of
control actions by providing insight on the future. A complete supply
chain management framework that is based on Model Predictive
Control (MPC) and Time Series Forecasting will be presented in this
paper. The proposed framework will be tested on industrial data in
order to assess the efficiency of the method and the impact of
forecast accuracy on overall control performance of the supply chain.
To this end, forecasting methodologies with different characteristics
will be implemented on test data to generate forecasts that will serve
as input to the Model Predictive Control module.
Abstract: In designing river intakes and diversion structures, it is paramount that the sediments entering the intake are minimized or, if possible, completely separated. Due to high water velocity, sediments can significantly damage hydraulic structures especially when mechanical equipment like pumps and turbines are used. This subsequently results in wasting water, electricity and further costs. Therefore, it is prudent to investigate and analyze the performance of lateral intakes affected by sediment control structures. Laboratory experiments, despite their vast potential and benefits, can face certain limitations and challenges. Some of these include: limitations in equipment and facilities, space constraints, equipment errors including lack of adequate precision or mal-operation, and finally, human error. Research has shown that in order to achieve the ultimate goal of intake structure design – which is to design longlasting and proficient structures – the best combination of sediment control structures (such as sill and submerged vanes) along with parameters that increase their performance (such as diversion angle and location) should be determined. Cost, difficulty of execution and environmental impacts should also be included in evaluating the optimal design. This solution can then be applied to similar problems in the future. Subsequently, the model used to arrive at the optimal design requires high level of accuracy and precision in order to avoid improper design and execution of projects. Process of creating and executing the design should be as comprehensive and applicable as possible. Therefore, it is important that influential parameters and vital criteria is fully understood and applied at all stages of choosing the optimal design. In this article, influential parameters on optimal performance of the intake, advantages and disadvantages, and efficiency of a given design are studied. Then, a multi-criterion decision matrix is utilized to choose the optimal model that can be used to determine the proper parameters in constructing the intake.
Abstract: Noise contamination in a magnetic resonance (MR)
image could occur during acquisition, storage, and transmission in
which effective filtering is required to avoid repeating the MR
procedure. In this paper, an iterative asymmetrical triangle fuzzy
filter with moving average center (ATMAVi filter) is used to reduce
different levels of salt and pepper noise in a brain MR image. Besides
visual inspection on filtered images, the mean squared error (MSE) is
used as an objective measurement. When compared with the median
filter, simulation results indicate that the ATMAVi filter is effective
especially for filtering a higher level noise (such as noise density =
0.45) using a smaller window size (such as 3x3) when operated
iteratively or using a larger window size (such as 5x5) when operated
non-iteratively.
Abstract: Object: Review recent publications of patient safety
culture to investigate the relationship between leadership behavior,
safety culture, and safety performance in the healthcare industry.
Method: This study is a cross-sectional study, 350 questionnaires were
mailed to hospital workers with 195 valid responses obtained, and a
55.7% valid response rate. Confirmatory factor analysis (CFA) was
carried out to test the factor structure and determine if the composite
reliability was significant with a factor loading of >0.5, resulting in an
acceptable model fit. Results: Through the analysis of One-way
ANOVA, the results showed that physicians significantly have more
negative patient safety culture perceptions and safety performance
perceptions than non- physicians. Conclusions: The path analysis
results show that leadership behavior affects safety culture and safety
performance in the health care industry. Safety performance was
affected and improved with contingency leadership and a positive
patient safety organization culture. The study suggests improving
safety performance by providing a well-managed system that
includes: consideration of leadership, hospital worker training
courses, and a solid safety reporting system.
Abstract: Today the social marketing was constituted as a tool
of significant value in what he refers to the promotion of changes of
behaviors, attitudes end practices. With the objective of analyzing the
benefits that the social marketing can bring for the organizations that
use it the research was of the exploratory and descriptive. In the
present study the comparative method was used, through a qualitative
approach, to analyze the activities developed by three institutions:
the Recovery Center Rosa de Saron, the House of Recovery for
addicts and Teen Challenge Institute Children's Cancer of the
Wasteland (ICIA), kindred of pointing out the benefits of the social
marketing in organizations that don-t seek the profit.
Abstract: In this study, an analysis has been performed for
heat and mass transfer of a steady laminar boundary-layer flow
of a viscous flow past a nonlinearly stretching sheet.
Parameters n, Ec, k0, Sc represent the dominance of the
nonlinearly effect, viscous effect, radiation effect and mass
transfer effect which have presented in governing equations,
respectively. The similarity transformation and the
finite-difference method have been used to analyze the present
problem.
Abstract: Photonic Crystal (PhC) based devices are being
increasingly used in multifunctional, compact devices in integrated
optical communication systems. They provide excellent
controllability of light, yet maintaining the small size required for
miniaturization. In this paper, the band gap properties of PhCs and
their typical applications in optical waveguiding are considered.
Novel PhC based applications such as nonlinear switching and
tapers are considered and simulation results are shown using the
accurate time-domain numerical method based on Finite Difference
Time Domain (FDTD) scheme. The suitability of these devices for
novel applications is discussed and evaluated.
Abstract: This research investigates risk factors for defective products in autoparts factories. Under a Bayesian framework, a generalized linear mixed model (GLMM) in which the dependent variable, the number of defective products, has a Poisson distribution is adopted. Its performance is compared with the Poisson GLM under a Bayesian framework. The factors considered are production process, machines, and workers. The products coded RT50 are observed. The study found that the Poisson GLMM is more appropriate than the Poisson GLM. For the production Process factor, the highest risk of producing defective products is Process 1, for the Machine factor, the highest risk is Machine 5, and for the Worker factor, the highest risk is Worker 6.
Abstract: Water pollution assessment problems arise frequently
in environmental science. In this research, a finite difference method
for solving the one-dimensional steady convection-diffusion equation
with variable coefficients is proposed; it is then used to optimize
water treatment costs.
Abstract: Today-s economy is in a permanent change, causing
merger and acquisitions and co operations between enterprises. As a
consequence, process adaptations and realignments result in systems
integration and software development projects. Processes and
procedures to execute such projects are still reliant on craftsman-ship
of highly skilled workers. A generally accepted, industrialized
production, characterized by high efficiency and quality, seems
inevitable.
In spite of this, current concepts of software industrialization are
aimed at traditional software engineering and do not consider the
characteristics of systems integration. The present work points out
these particularities and discusses the applicability of existing
industrial concepts in the systems integration domain. Consequently
it defines further areas of research necessary to bring the field of
systems integration closer to an industrialized production, allowing a
higher efficiency, quality and return on investment.
Abstract: Ion-acoustic solitary waves in a plasma with
nonthermal electrons, thermal positrons and warm ions are
investigated using Sagdeev-s pseudopotential technique. We study
the effects of non-thermal electrons and ion temperature on solitons
and show both negative and positive potential waves are possible.
Abstract: In the present paper; an experimental and numerical
investigations of drag reduction on a grooved circular cylinder have
been performed. The experiments were carried out in closed circuit
subsonic wind tunnel (TE44); the pressure distribution on the
cylinder was conducted using a TE44DPS differential pressure
scanner and the drag forces were measured using the TE81 balance.
The display unit is linked to a computer, loaded with DATASLIM
software for data analysis and logging of result. The numerical study
was performed using the code ANSYS FLUENT solving the
Reynolds Averaged Navier-Stokes (RANS) equations. The k-ε and k-
ω SST models were tested. The results obtained from the
experimental and numerical investigations have showed a reduction
in the drag when using longitudinal grooves namely 2 and 6 on the
cylinder.
Abstract: This paper presents an improved variable ordering method to obtain the minimum number of nodes in Reduced Ordered Binary Decision Diagrams (ROBDD). The proposed method uses the graph topology to find the best variable ordering. Therefore the input Boolean function is converted to a unidirectional graph. Three levels of graph parameters are used to increase the probability of having a good variable ordering. The initial level uses the total number of nodes (NN) in all the paths, the total number of paths (NP) and the maximum number of nodes among all paths (MNNAP). The second and third levels use two extra parameters: The shortest path among two variables (SP) and the sum of shortest path from one variable to all the other variables (SSP). A permutation of the graph parameters is performed at each level for each variable order and the number of nodes is recorded. Experimental results are promising; the proposed method is found to be more effective in finding the variable ordering for the majority of benchmark circuits.
Abstract: Stress analysis of functionally graded composite plates
composed of ceramic, functionally graded material and metal layers is
investigated using 3-D finite element method. In FGM layer, material
properties are assumed to be varied continuously in the thickness
direction according to a simple power law distribution in terms of the
volume fraction of a ceramic and metal. The 3-D finite element model
is adopted by using an 18-node solid element to analyze more
accurately the variation of material properties in the thickness
direction. Numerical results are compared for three types of materials.
In the analysis, the tensile and the compressive stresses are
summarized for various FGM thickness ratios, volume fraction
distributions, geometric parameters and mechanical loads.
Abstract: In this paper, Zinc Oxide (ZnO) thin films are deposited on glass substrate by sol-gel method. The ZnO thin films with well defined orientation were acquired by spin coating of zinc acetate dehydrate monoethanolamine (MEA), de-ionized water and isopropanol alcohol. These films were pre-heated at 275°C for 10 min and then annealed at 350°C, 450°C and 550°C for 80 min. The effect of annealing temperature and different thickness on structure and surface morphology of the thin films were verified by Atomic Force Microscopy (AFM). It was found that there was a significant effect of annealing temperature on the structural parameters of the films such as roughness exponent, fractal dimension and interface width. Thin films also were characterizied by X-ray Diffractometery (XRD) method. XRD analysis revealed that the annealed ZnO thin films consist of single phase ZnO with wurtzite structure and show the c-axis grain orientation. Increasing annealing temperature increased the crystallite size and the c-axis orientation of the film after 450°C. Also In this study, ZnO thin films in different thickness have been prepared by sol-gel method on the glass substrate at room temperature. The thicknesses of films are 100, 150 and 250 nm. Using fractal analysis, morphological characteristics of surface films thickness in amorphous state were investigated. The results show that with increasing thickness, surface roughness (RMS) and lateral correlation length (ξ) are decreased. Also, the roughness exponent (α) and growth exponent (β) were determined to be 0.74±0.02 and 0.11±0.02, respectively.