Abstract: Process control and energy conservation are the two
primary reasons for using an adjustable speed drive. However,
voltage sags are the most important power quality problems facing
many commercial and industrial customers. The development of
boost converters has raised much excitement and speculation
throughout the electric industry. Now utilities are looking to these
devices for performance improvement and reliability in a variety of
areas. Examples of these include sags, spikes, or transients in supply
voltage as well as unbalanced voltages, poor electrical system
grounding, and harmonics. In this paper, simulations results are
presented for the verification of the proposed boost converter
topology. Boost converter provides ride through capability during
sag and swell. Further, input currents are near sinusoidal. This
eliminates the need of braking resistor also.
Abstract: Symbolic Circuit Analysis (SCA) is a technique used
to generate the symbolic expression of a network. It has become a
well-established technique in circuit analysis and design. The
symbolic expression of networks offers excellent way to perform
frequency response analysis, sensitivity computation, stability
measurements, performance optimization, and fault diagnosis. Many
approaches have been proposed in the area of SCA offering different
features and capabilities. Numerical Interpolation methods are very
common in this context, especially by using the Fast Fourier
Transform (FFT). The aim of this paper is to present a method for
SCA that depends on the use of Wavelet Transform (WT) as a
mathematical tool to generate the symbolic expression for large
circuits with minimizing the analysis time by reducing the number of
computations.
Abstract: Present wireless communication demands compact and intelligent devices with multitasking capabilities at affordable cost. The focus in the presented paper is on a dual band antenna for wireless communication with the capability of operating at two frequency bands with same structure. Two resonance frequencies are observed with the second operation band at 4.2GHz approximately three times the first resonance frequency at 1.5GHz. Structure is simple loop of microstrip line with characteristic impedance 50 ohms. The proposed antenna is designed using defective ground structure (DGS) and shows the nearly one third reductions in size as compared to without DGS. This antenna was simulated on electromagnetic (EM) simulation software and fabricated using microwave integrated circuit technique on RT-Duroid dielectric substrate (εr= 2.22) of thickness (H=15 mils). The designed antenna was tested on automatic network analyzer and shows the good agreement with simulated results. The proposed structure is modeled into an equivalent electrical circuit and simulated on circuit simulator. Subsequently, theoretical analysis was carried out and simulated. The simulated, measured, equivalent circuit response, and theoretical results shows good resemblance. The bands of operation draw many potential applications in today’s wireless communication.
Abstract: In this paper we intend to ascertain the state of the art on multifingered end-effectors, also known as robotic hands or dexterous robot hands, and propose an experimental setup for an innovative task based design approach, involving cutting edge technologies in motion capture. After an initial description of the capabilities and complexity of a human hand when grasping objects, in order to point out the importance of replicating it, we analyze the mechanical and kinematical structure of some important works carried out all around the world in the last three decades and also review the actuators and sensing technologies used. Finally we describe a new design philosophy proposing an experimental setup for the first stage using recent developments in human body motion capture systems that might lead to lighter and always more dexterous robotic hands.
Abstract: The objective of this work which is based on the
approach of simultaneous engineering is to contribute to the
development of a CIM tool for the synthesis of functional design
dimensions expressed by average values and tolerance intervals. In
this paper, the dispersions method known as the Δl method which
proved reliable in the simulation of manufacturing dimensions is
used to develop a methodology for the automation of the simulation.
This methodology is constructed around three procedures. The first
procedure executes the verification of the functional requirements by
automatically extracting the functional dimension chains in the
mechanical sub-assembly. Then a second procedure performs an
optimization of the dispersions on the basis of unknown variables.
The third procedure uses the optimized values of the dispersions to
compute the optimized average values and tolerances of the
functional dimensions in the chains. A statistical and cost based
approach is integrated in the methodology in order to take account of
the capabilities of the manufacturing processes and to distribute
optimal values among the individual components of the chains.
Abstract: Recently, there are significant improvements in the
capabilities of mobile devices; rendering large terrain is tedious
because of the constraint in resources of mobile devices. This
paper focuses on the implementation of terrain rendering on
mobile device to observe some issues and current constraints
occurred. Experiments are performed using two datasets with
results based on rendering speed and appearance to ascertain both
the issues and constraints. The result shows a downfall of frame
rate performance because of the increase of triangles. Since the
resolution between computer and mobile device is different, the
terrain surface on mobile device looks more unrealistic compared
to on a computer. Thus, more attention in the development of
terrain rendering on mobile devices is required. The problems
highlighted in this paper will be the focus of future research and
will be a great importance for 3D visualization on mobile device.
Abstract: Utilization of various sensors has made it possible to
extend capabilities of industrial robots. Among these are vision
sensors that are used for providing visual information to assist robot
controllers. This paper presents a method of integrating a vision
system and a simulation program with an industrial robot. The vision
system is employed to detect a target object and compute its location
in the robot environment. Then, the target object-s information is sent
to the robot controller via parallel communication port. The robot
controller uses the extracted object information and the simulation
program to control the robot arm for approaching, grasping and
relocating the object. This paper presents technical details of system
components and describes the methodology used for this integration.
It also provides a case study to prove the validity of the methodology
developed.
Abstract: This paper provides a flexible way of controlling
Variable-Bit-Rate (VBR) of compressed digital video, applicable to
the new H264 video compression standard. The entire video
sequence is assessed in advance and the quantisation level is then set
such that bit rate (and thus the frame rate) remains within
predetermined limits compatible with the bandwidth of the
transmission system and the capabilities of the remote end, while at
the same time providing constant quality similar to VBR encoding.
A process for avoiding buffer starvation by selectively eliminating
frames from the encoded output at times when the frame rate is slow
(large number of bits per frame) will be also described. Finally, the
problem of buffer overflow will be solved by selectively eliminating
frames from the received input to the decoder. The decoder detects
the omission of the frames and resynchronizes the transmission by
monitoring time stamps and repeating frames if necessary.
Abstract: Wireless Sensor Networks (WSNs) have attracted the attention of many researchers. This has resulted in their rapid integration in very different areas such as precision agriculture,environmental monitoring, object and event detection and military surveillance. Due to the current WSN characteristics this technology is specifically useful in industrial areas where security, reliability and autonomy are basic, such as nuclear power plants, chemical plants, and others. In this paper we present a system based on WSNs to monitor environmental conditions around and inside a nuclear power plant, specifically, radiation levels. Sensor nodes, equipped with radiation sensors, are deployed in fixed positions throughout the plant. In addition, plant staff are also equipped with mobile devices with higher capabilities than sensors such as for example PDAs able to monitor radiation levels and other conditions around them. The system enables communication between PDAs, which form a Mobile Ad-hoc Wireless Network (MANET), and allows workers to monitor remote conditions in the plant. It is particularly useful during stoppage periods for inspection or in the event of an accident to prevent risk situations.
Abstract: In this work, simulation algorithms for contact drying
of agitated particulate materials under vacuum and at atmospheric
pressure were developed. The implementation of algorithms gives a
predictive estimation of drying rate curves and bulk bed temperature
during contact drying. The calculations are based on the penetration
model to describe the drying process, where all process parameters
such as heat and mass transfer coefficients, effective bed properties,
gas and liquid phase properties are estimated with proper
correlations. Simulation results were compared with experimental
data from the literature. In both cases, simulation results were in good
agreement with experimental data. Few deviations were identified
and the limitations of the predictive capabilities of the models are
discussed. The programs give a good insight of the drying behaviour
of the analysed powders.
Abstract: The main purpose of this research paper was to study
the requirements for human capital development in order to be ready
for ASEAN Community. Thai education institutions are encountering
a challenging course of change to be effective members of ASEAN
Economic Community (AEC) in 2015. It was vital that everyone and
every organization participate in the process of becoming part of the
ASEAN community, a pluralistic society. Thai universities will be
required to partake in the human capital development in a variety of
fields. In order to assist the whole nation to enhance potential
development, there was a need to collaborate with other ASEAN
leading universities to do researches to ameliorate the qualifications
and capabilities of university management, administers, professors,
and staffs.
Abstract: The scale, complexity and worldwide geographical
spread of the LHC computing and data analysis problems are
unprecedented in scientific research. The complexity of processing
and accessing this data is increased substantially by the size and
global span of the major experiments, combined with the limited
wide area network bandwidth available. We present the latest
generation of the MONARC (MOdels of Networked Analysis at
Regional Centers) simulation framework, as a design and modeling
tool for large scale distributed systems applied to HEP experiments.
We present simulation experiments designed to evaluate the
capabilities of the current real-world distributed infrastructure to
support existing physics analysis processes and the means by which
the experiments bands together to meet the technical challenges
posed by the storage, access and computing requirements of LHC
data analysis within the CMS experiment.
Abstract: In general, small-scale vegetables farmers experience
problems in improving the safety and quality of vegetables supplied
to high-class consumers in modern retailers. They also lack of
information to access market. The farmers group and/or cooperative
(FGC) should be able to assist its members by providing training in
handling and packing vegetables and enhancing marketing
capabilities to sell commodities to the modern retailers. This study
proposes an agri-food supply chain (ASC) model that involves the
corporate social responsibility (CSR) activities to cultivate the
capabilities of farmers to access market. Multi period ASC model is
formulated as Weighted Goal Programming (WGP) to analyze the
impacts of CSR programs to empower the FGCs in managing the
small-scale vegetables farmers. The results show that the proposed
model can be used to determine the priority of programs in order to
maximize the four goals to be achieved in the CSR programs.
Abstract: This article is an extension and a practical application
approach of Wheeler-s NEBIC theory (Net Enabled Business
Innovation Cycle). NEBIC theory is a new approach in IS research
and can be used for dynamic environment related to new technology.
Firms can follow the market changes rapidly with support of the IT
resources. Flexible firms adapt their market strategies, and respond
more quickly to customers changing behaviors. When every leading
firm in an industry has access to the same IT resources, the way that
these IT resources are managed will determine the competitive
advantages or disadvantages of firm. From Dynamic Capabilities
Perspective and from newly introduced NEBIC theory by Wheeler,
we know that only IT resources cannot deliver customer value but
good configuration of those resources can guarantee customer value
by choosing the right emerging technology, grasping the right
economic opportunities through business innovation and growth. We
found evidences in literature that SOA (Service Oriented
Architecture) is a promising emerging technology which can deliver
the desired economic opportunity through modularity, flexibility and
loose-coupling. SOA can also help firms to connect in network which
can open a new window of opportunity to collaborate in innovation
and right kind of outsourcing. There are many articles and research
reports indicates that failure rate in outsourcing is very high but at the
same time research indicates that successful outsourcing projects
adds tangible and intangible benefits to the service consumer.
Business executives and policy makers in the west should not afraid
of outsourcing but they should choose the right strategy through the
use of emerging technology to significantly reduce the failure rate in
outsourcing.
Abstract: There exists a strong correlation between efficient project management and competitive advantage for organizations. Therefore, organizations are striving to standardize and assess the rigor of their project management processes and capabilities i.e. project management maturity. Researchers and standardization organizations have developed several project management maturity models (PMMMs) to assess project management maturity of the organizations. This study presents a critical evaluation of some of the leading PMMMs against OPM3® in a multitude of ways to look at which PMMM is the most comprehensive model - which could assess most aspects of organizations and also help the organizations in gaining competitive advantage over competitors. After a detailed morphological analysis of the models, it is concluded that OPM3® is the most promising maturity model that can really provide a competitive advantage to the organizations due to its unique approach of assessment and improvement strategies.
Abstract: Due to the fact that in the new century customers tend
to express globally increasing demands, networks of interconnected
businesses have been established in societies and the management of
such networks seems to be a major key through gaining competitive
advantages. Supply chain management encompasses such managerial
activities. Within a supply chain, a critical role is played by quality.
QFD is a widely-utilized tool which serves the purpose of not only
bringing quality to the ultimate provision of products or service
packages required by the end customer or the retailer, but it can also
initiate us into a satisfactory relationship with our initial customer;
that is the wholesaler. However, the wholesalers- cooperation is
considerably based on the capabilities that are heavily dependent on
their locations and existing circumstances. Therefore, it is undeniable
that for all companies each wholesaler possesses a specific
importance ratio which can heavily influence the figures calculated in
the House of Quality in QFD. Moreover, due to the competitiveness
of the marketplace today, it-s been widely recognized that
consumers- expression of demands has been highly volatile in
periods of production. Apparently, such instability and proneness to
change has been very tangibly noticed and taking it into account
during the analysis of HOQ is widely influential and doubtlessly
required. For a more reliable outcome in such matters, this article
demonstrates the application viability of Analytic Network Process
for considering the wholesalers- reputation and simultaneously
introduces a mortality coefficient for the reliability and stability of
the consumers- expressed demands in course of time. Following to
this, the paper provides further elaboration on the relevant
contributory factors and approaches through the calculation of such
coefficients. In the end, the article concludes that an empirical
application is needed to achieve broader validity.
Abstract: Self-organizing map (SOM) provides both clustering and visualization capabilities in mining data. Dynamic self-organizing maps such as Growing Self-organizing Map (GSOM) has been developed to overcome the problem of fixed structure in SOM to enable better representation of the discovered patterns. However, in mining large datasets or historical data the hierarchical structure of the data is also useful to view the cluster formation at different levels of abstraction. In this paper, we present a technique to generate concept trees from the GSOM. The formation of tree from different spread factor values of GSOM is also investigated and the quality of the trees analyzed. The results show that concept trees can be generated from GSOM, thus, eliminating the need for re-clustering of the data from scratch to obtain a hierarchical view of the data under study.
Abstract: In this paper a bank of velocity filters is devised to be
used for isolating a moving object with specific velocity in a sequence of frames. The approach used is a 3-D FFT based experimental procedure without applying any theoretical concept
from velocity filters. Accordingly, velocity filters are built using the
spectral signature of each separate moving object. Experimentation
reveals the capabilities of the constructed filter bank to separate moving objects as far as the amplitude as well as the direction of the
velocity are concerned.
Abstract: The paper deals with the perspectives and possibilities
of "smart solutions" to critical infrastructure protection. It means that
common computer aided technologies are used from the perspective
of new, better protection of selected infrastructure objects. The paper
is focused on the co-product of the Czech Defence Research Project -
ADAPTIV. This project is carrying out by the University of Defence,
Faculty of Economics and Management at the Department of Civil
Protection. The project creates system and technology for adaptive
cybernetic camouflage of armed forces objects, armaments, vehicles
and troops and of mobilization infrastructure. These adaptive
camouflage system and technology will be useful for army tactic
activities protection and for decoys generation also. The fourth
chapter of the paper concerns the possibilities of using the introduced
technology to the protection of selected civil (economically
important), critical infrastructure objects. The aim of this section
is to introduce the scientific capabilities and potential of the
University of Defence research results and solutions for the practice.
Abstract: One way for optimum loading of overdimensioning
conveyers is speed (capacity) decrement, with attention for
production capabilities and demands. At conveyers which drives with
three phase slip-ring induction motor, technically reasonable solution
for conveyer (driving motors) speed regulation is using constant
torque subsynchronous cascade with static semiconductor converter
and transformer for energy reversion to the power network. In the
paper is described mathematical model for parameter calculation of
two-motors 6 kV subsynchronous cascade. It is also demonstrated
that applying of this cascade gave several good properties, foremost
in electrical energy saving, also in improving of other energy
indexes, and finally that results in cost reduction of complete
electrical motor drive.