Abstract: The wellbeing of urban dwellers is strongly associated with the quality and quantity of green infrastructure. Nevertheless, urban green infrastructure is still lagging in many Arab cities, and Jordan is no exception. The capital city of Jordan, Amman, is becoming more urban dense with limited green spaces. The unplanned urban growth in Amman has caused several environmental problems such as urban heat islands, air pollution and lack of green spaces. This study aims to investigate the most suitable drivers to leverage the implementation of urban green infrastructure in Jordan through qualitative and quantitative analysis. The qualitative research includes an extensive literature review to discuss the most common drivers used internationally to promote urban green infrastructure implementation in the literature. The quantitative study employs a questionnaire survey to rank the suitability of each driver. Consultants, contractors and policymakers were invited to fill the research questionnaire according to their judgments and opinions. Relative Importance Index has been used to calculate the weighted average of all drivers and the Kruskal-Wallis test to check the degree of agreement among groups. This study finds that research participants agreed that indirect financial incentives (i.e., tax reductions, reduction in stormwater utility fee, reduction of interest rate, density bonus etc.) are the most effective incentive policy whilst granting sustainability certificate policy is the least effective driver to ensure widespread of UGI is elements in Jordan.
Abstract: This study examined the association between creative performance, organizational climate and leadership, affectivity, shared flow, and group decision making. The sample consisted of 315 cadets of a military academic unit of South America. Satisfaction with the decision-making process during a creative task was associated with the usefulness and effectiveness of the ideas generated by the teams with a weighted average correlation of r = .18. Organizational emotional climate, positive and innovation leadership were associated with this group decision-making process r = .25, with shared flow, r = .29 and with positive affect felt during the performance of the creative task, r = .12. In a sequential mediational analysis positive organizational leadership styles were significantly associated with decision-making process and trough cohesion with utility and efficacy of the solution of a creative task. Satisfactory decision-making was related to shared flow during the creative task at collective or group level, and positive affect with flow at individual level.This study examined the association between creative performance, organizational climate and leadership, affectivity, shared flow, and group decision making. The sample consisted of 315 cadets of a military academic unit of South America. Satisfaction with the decision-making process during a creative task was associated with the usefulness and effectiveness of the ideas generated by the teams with a weighted average correlation of r = .18. Organizational emotional climate, positive and innovation leadership were associated with this group decision-making process r = .25, with shared flow, r = .29 and with positive affect felt during the performance of the creative task, r = .12. In a sequential mediational analysis positive organizational leadership styles were significantly associated with decision-making process and trough cohesion with utility and efficacy of the solution of a creative task. Satisfactory decision-making was related to shared flow during the creative task at collective or group level, and positive affect with flow at individual level.
Abstract: This paper presents a classifier ensemble approach for
predicting the survivability of the breast cancer patients using the
latest database version of the Surveillance, Epidemiology, and End
Results (SEER) Program of the National Cancer Institute. The system
consists of two main components; features selection and classifier
ensemble components. The features selection component divides the
features in SEER database into four groups. After that it tries to find
the most important features among the four groups that maximizes the
weighted average F-score of a certain classification algorithm. The
ensemble component uses three different classifiers, each of which
models different set of features from SEER through the features
selection module. On top of them, another classifier is used to give
the final decision based on the output decisions and confidence
scores from each of the underlying classifiers. Different classification
algorithms have been examined; the best setup found is by using the
decision tree, Bayesian network, and Na¨ıve Bayes algorithms for the
underlying classifiers and Na¨ıve Bayes for the classifier ensemble
step. The system outperforms all published systems to date when
evaluated against the exact same data of SEER (period of 1973-2002).
It gives 87.39% weighted average F-score compared to 85.82% and
81.34% of the other published systems. By increasing the data size to
cover the whole database (period of 1973-2014), the overall weighted
average F-score jumps to 92.4% on the held out unseen test set.
Abstract: Critical success factors (CSFs) and the criteria to measure project success have received much attention over the decades and are among the most widely researched topics in the context of project management. However, although there have been extensive studies on the subject by different researchers, to date, there has been little agreement on the CSFs. The aim of this study is to identify the CSFs that influence the performance of construction projects, and determine their relative importance for different objectives across five stages in the project life cycle. A considerable literature review was conducted that resulted in the identification of 179 individual factors. These factors were then grouped into nine major categories. A questionnaire survey was used to collect data from three groups of respondents: client representatives, consultants, and contractors. Out of 164 questionnaires distributed, 93 were returned, yielding a response rate of 56.7%. Using the mean score, relative importance index, and weighted average method, the top 10 critical factors for each category were identified. The agreement of survey respondents on those categorised factors were analysed using Spearman’s rank correlation. A one-way analysis of variance was then performed to determine whether the mean scores among the various groups of respondents were statistically significant. The findings indicate the most CSFs in each category in procurement phase are: proper procurement programming of materials (time), stability in the price of materials (cost), and determining quality in the construction (quality). They are then followed by safety equipment acquisition and maintenance (health and safety), budgeting allowed in a contractual arrangement for implementing environmental management activities (environment), completeness of drawing documents (productivity), accurate measurement and pricing of bill of quantities (risk management), adequate communication among the project team (human resource), and adequate cost control measures (client satisfaction). An understanding of CSFs would help all interested parties in the construction industry to improve project performance. Furthermore, the results of this study would help construction professionals and practitioners take proactive measures for effective project management.
Abstract: Power systems are operating under stressed condition
due to continuous increase in demand of load. This can lead to
voltage instability problem when face additional load increase or
contingency. In order to avoid voltage instability suitable size of
reactive power compensation at optimal location in the system is
required which improves the load margin. This work aims at
obtaining optimal size as well as location of compensation in the 39-
bus New England system with the help of Bacteria Foraging and
Genetic algorithms. To reduce the computational time the work
identifies weak candidate buses in the system, and then picks only
two of them to take part in the optimization. The objective function is
based on a recently proposed voltage stability index which takes into
account the weighted average sensitivity index is a simpler and faster
approach than the conventional CPF algorithm. BFOA has been
found to give better results compared to GA.
Abstract: Management is required to understand all information security risks within an organization, and to make decisions on which information security risks should be treated in what level by allocating how much amount of cost. However, such decision-making is not usually easy, because various measures for risk treatment must be selected with the suitable application levels. In addition, some measures may have objectives conflicting with each other. It also makes the selection difficult. Moreover, risks generally have trends and it also should be considered in risk treatment. Therefore, this paper provides the extension of the model proposed in the previous study. The original model supports the selection of measures by applying a combination of weighted average method and goal programming method for multi-objective analysis to find an optimal solution. The extended model includes the notion of weights to the risks, and the larger weight means the priority of the risk.
Abstract: Human society, there are many uncertainties, such as economic growth rate forecast of the financial crisis, many scholars have, since the the Song Chissom two scholars in 1993 the concept of the so-called fuzzy time series (Fuzzy Time Series)different mode to deal with these problems, a previous study, however, usually does not consider the relevant variables selected and fuzzy process based solely on subjective opinions the fuzzy semantic discrete, so can not objectively reflect the characteristics of the data set, in addition to carrying outforecasts are often fuzzy rules as equally important, failed to consider the importance of each fuzzy rule. For these reasons, the variable selection (Factor Selection) through self-organizing map (Self-Organizing Map, SOM) and proposed high-end weighted multivariate fuzzy time series model based on fuzzy neural network (Fuzzy-BPN), and using the the sequential weighted average operator (Ordered Weighted Averaging operator, OWA) weighted prediction. Therefore, in order to verify the proposed method, the Taiwan stock exchange (Taiwan Stock Exchange Corporation) Taiwan Weighted Stock Index (Taiwan Stock Exchange Capitalization Weighted Stock Index, TAIEX) as experimental forecast target, in order to filter the appropriate variables in the experiment Finally, included in other studies in recent years mode in conjunction with this study, the results showed that the predictive ability of this study further improve.
Abstract: We present the induced generalized hybrid
averaging (IGHA) operator. It is a new aggregation operator
that generalizes the hybrid averaging (HA) by using
generalized means and order inducing variables. With this
formulation, we get a wide range of mean operators such as
the induced HA (IHA), the induced hybrid quadratic
averaging (IHQA), the HA, etc. The ordered weighted
averaging (OWA) operator and the weighted average (WA)
are included as special cases of the HA operator. Therefore,
with this generalization we can obtain a wide range of
aggregation operators such as the induced generalized OWA
(IGOWA), the generalized OWA (GOWA), etc. We further
generalize the IGHA operator by using quasi-arithmetic
means. Then, we get the Quasi-IHA operator. Finally, we also
develop an illustrative example of the new approach in a
financial decision making problem. The main advantage of the
IGHA is that it gives a more complete view of the decision
problem to the decision maker because it considers a wide
range of situations depending on the operator used.
Abstract: We present a method for the selection of students
in interdisciplinary studies based on the hybrid averaging
operator. We assume that the available information given in
the problem is uncertain so it is necessary to use interval
numbers. Therefore, we suggest a new type of hybrid
aggregation called uncertain induced generalized hybrid
averaging (UIGHA) operator. It is an aggregation operator
that considers the weighted average (WA) and the ordered
weighted averaging (OWA) operator in the same formulation.
Therefore, we are able to consider the degree of optimism of
the decision maker and grades of importance in the same
approach. By using interval numbers, we are able to represent
the information considering the best and worst possible results
so the decision maker gets a more complete view of the
decision problem. We develop an illustrative example of the
proposed scheme in the selection of students in
interdisciplinary studies. We see that with the use of the
UIGHA operator we get a more complete representation of the
selection problem. Then, the decision maker is able to
consider a wide range of alternatives depending on his
interests. We also show other potential applications that could
be used by using the UIGHA operator in educational problems
about selection of different types of resources such as
students, professors, etc.
Abstract: FACTS devices are used to control the power flow, to
increase the transmission capacity and to optimize the stability of the
power system. One of the most widely used FACTS devices is
Unified Power Flow Controller (UPFC). The controller used in the
control mechanism has a significantly effects on controlling of the
power flow and enhancing the system stability of UPFC. According
to this, the capability of UPFC is observed by using different control
mechanisms based on P, PI, PID and fuzzy logic controllers (FLC) in
this study. FLC was developed by taking consideration of Takagi-
Sugeno inference system in the decision process and Sugeno-s
weighted average method in the defuzzification process. Case studies
with different operating conditions are applied to prove the ability of
UPFC on controlling the power flow and the effectiveness of
controllers on the performance of UPFC. PSCAD/EMTDC program
is used to create the FLC and to simulate UPFC model.
Abstract: Increasing energy absorption is a significant parameter
in vehicle design. Absorbing more energy results in decreasing
occupant damage. Limitation of the deflection in a side impact results
in decreased energy absorption (SEA) and increased peak load (PL).
Hence a high crash force jeopardizes passenger safety and vehicle
integrity. The aims of this paper are to determine suitable dimensions
and material of a square beam subjected to side impact, in order to
maximize SEA and minimize PL. To achieve this novel goal, the
geometric parameters of a square beam are optimized using the
response surface method (RSM).multi-objective optimization is
performed, and the optimum design for different response features is
obtained.
Abstract: In this paper, we proposed a method to reduce
quantization error. In order to reduce quantization error, low pass
filtering is applied on neighboring samples of current block in
H.264/AVC. However, it has a weak point that low pass filtering is
performed regardless of prediction direction. Since it doesn-t consider
prediction direction, it may not reduce quantization error effectively.
Proposed method considers prediction direction for low pass filtering
and uses a threshold condition for reducing flag bit. We compare our
experimental result with conventional method in H.264/AVC and we
can achieve the average bit-rate reduction of 1.534% by applying the
proposed method. Bit-rate reduction between 0.580% and 3.567% are
shown for experimental results.
Abstract: A kinetic model for propane dehydrogenation in an
industrial moving bed reactor is developed based on the reported
reaction scheme. The kinetic parameters and activity constant are
fine tuned with several sets of balanced plant data. Plant data at
different operating conditions is applied to validate the model and
the results show a good agreement between the model
predictions and plant observations in terms of the amount of main
product, propylene produced. The simulation analysis of key
variables such as inlet temperature of each reactor (Tinrx) and
hydrogen to total hydrocarbon ratio (H2/THC) affecting process
performance is performed to identify the operating condition to
maximize the production of propylene. Within the range of operating
conditions applied in the present studies, the operating condition to
maximize the propylene production at the same weighted average
inlet temperature (WAIT) is ΔTinrx1= -2, ΔTinrx2= +1, ΔTinrx3= +1 ,
ΔTinrx4= +2 and ΔH2/THC= -0.02. Under this condition, the surplus
propylene produced is 7.07 tons/day as compared with base case.
Abstract: The fluid mechanics principle is used extensively in
designing axial flow fans and their associated equipment. This paper presents a computational fluid dynamics (CFD) modeling of air flow
distribution from a radiator axial flow fan used in an acid pump truck Tier4 (APT T4) Repower. This axial flow fan augments the transfer
of heat from the engine mounted on the APT T4.
CFD analysis was performed for an area weighted average static pressure difference at the inlet and outlet of the fan. Pressure contours, velocity vectors, and path lines were plotted for detailing
the flow characteristics for different orientations of the fan blade. The results were then compared and verified against known theoretical observations and actual experimental data. This study
shows that a CFD simulation can be very useful for predicting and understanding the flow distribution from a radiator fan for further
research work.
Abstract: Teachers form the backbone of any educational system, hence selecting qualified candidates is very crucial. In Malaysia, the decision making in the selection process involves a few stages: Initial filtering through academic achievement, taking entry examination and going through an interview session. The last stage is the most challenging since it highly depends on human judgment. Therefore, this study sought to identify the selection criteria for teacher candidates that form the basis for an efficient multi-criteria teacher-candidate selection model for that last stage. The relevant criteria were determined from the literature and also based on expert input that is those who were involved in interviewing teacher candidates from a public university offering the formal training program. There are three main competency criteria that were identified which are content of knowledge, communication skills and personality. Further, each main criterion was divided into a few subcriteria. The Analytical Hierarchy Process (AHP) technique was employed to allocate weights for the criteria and later, integrated a Simple Weighted Average (SWA) scoring approach to develop the selection model. Subsequently, a web-based Decision Support System was developed to assist in the process of selecting the qualified teacher candidates. The Teacher-Candidate Selection (TeCaS) system is able to assist the panel of interviewers during the selection process which involves a large amount of complex qualitative judgments.
Abstract: We present a new intuitionistic fuzzy aggregation
operator called the intuitionistic fuzzy ordered weighted
averaging-weighted average (IFOWAWA) operator. The main
advantage of the IFOWAWA operator is that it unifies the OWA
operator with the WA in the same formulation considering the degree
of importance that each concept has in the aggregation. Moreover, it is
able to deal with an uncertain environment that can be assessed with
intuitionistic fuzzy numbers. We study some of its main properties and
we see that it has a lot of particular cases such as the intuitionistic
fuzzy weighted average (IFWA) and the intuitionistic fuzzy OWA
(IFOWA) operator. Finally, we study the applicability of the new
approach on a financial decision making problem concerning the
selection of financial strategies.