Abstract: Sedimentation is a hydraulic phenomenon that is
emerging as a serious challenge in river engineering. When the flow
reaches a certain state that gather potential energy, it shifts the
sediment load along channel bed. The transport of such materials can
be in the form of suspended and bed loads. The movement of these
along the river course and channels and the ways in which this could
influence the water intakes is considered as the major challenges for
sustainable O&M of hydraulic structures. This could be very serious
in arid and semi-arid regions like Iran, where inappropriate watershed
management could lead to shifting a great deal of sediments into the
reservoirs and irrigation systems. This paper aims to investigate
sedimentation in the Western Canal of Dez Diversion Weir in Iran,
identifying factors which influence the process and provide ways in
which to mitigate its detrimental effects by using the SHARC
Software.
For the purpose of this paper, data from the Dezful water authority
and Dezful Hydrometric Station pertinent to a river course of about 6
Km were used.
Results estimated sand and silt bed loads concentrations to be 193
ppm and 827ppm respectively. Given the available data on average
annual bed loads and average suspended sediment loads of 165ppm
and 837ppm, there was a significant statistical difference (16%)
between the sand grains, whereas no significant difference (1.2%)
was find in the silt grain sizes. One explanation for such finding
being that along the 6 Km river course there was considerable
meandering effects which explains recent shift in the hydraulic
behavior along the stream course under investigation. The sand
concentration in downstream relative to present state of the canal
showed a steep descending curve. Sediment trapping on the other
hand indicated a steep ascending curve. These occurred because the
diversion weir was not considered in the simulation model.
Abstract: This paper presents the application of an enhanced
Particle Swarm Optimization (EPSO) combined with Gaussian
Mutation (GM) for solving the Dynamic Economic Dispatch (DED)
problem considering the operating constraints of generators. The
EPSO consists of the standard PSO and a modified heuristic search
approaches. Namely, the ability of the traditional PSO is enhanced
by applying the modified heuristic search approach to prevent the
solutions from violating the constraints. In addition, Gaussian
Mutation is aimed at increasing the diversity of global search, whilst
it also prevents being trapped in suboptimal points during search. To
illustrate its efficiency and effectiveness, the developed EPSO-GM
approach is tested on the 3-unit and 10-unit 24-hour systems
considering valve-point effect. From the experimental results, it can
be concluded that the proposed EPSO-GM provides, the accurate
solution, the efficiency, and the feature of robust computation
compared with other algorithms under consideration.
Abstract: The solvated electron is self-trapped (polaron) owing
to strong interaction with the quantum polarization field. If the
electron and quantum field are strongly coupled then the collective
localized state of the field and quasi-particle is formed. In such a
formation the electron motion is rather intricate. On the one hand the
electron oscillated within a rather deep polarization potential well
and undergoes the optical transitions, and on the other, it moves
together with the center of inertia of the system and participates in
the thermal random walk. The problem is to separate these motions
correctly, rigorously taking into account the conservation laws. This
can be conveniently done using Bogolyubov-Tyablikov method of
canonical transformation to the collective coordinates. This
transformation removes the translational degeneracy and allows one
to develop the successive approximation algorithm for the energy and
wave function while simultaneously fulfilling the law of conservation
of total momentum of the system. The resulting equations determine
the electron transitions and depend explicitly on the translational
velocity of the quasi-particle as whole. The frequency of optical
transition is calculated for the solvated electron in ammonia, and an
estimate is made for the thermal-induced spectral bandwidth.
Abstract: Ontology is widely being used as a tool for organizing
information, creating the relation between the subjects within the
defined knowledge domain area. Various fields such as Civil,
Biology, and Management have successful integrated ontology in
decision support systems for managing domain knowledge and to
assist their decision makers. Gross pollutant traps (GPT) are devices
used in trapping and preventing large items or hazardous particles in
polluting and entering our waterways. However choosing and
determining GPT is a challenge in Malaysia as there are inadequate
GPT data repositories being captured and shared. Hence ontology is
needed to capture, organize and represent this knowledge into
meaningful information which can be contributed to the efficiency of
GPT selection in Malaysia urbanization. A GPT Ontology framework
is therefore built as the first step to capture GPT knowledge which
will then be integrated into the decision support system. This paper
will provide several examples of the GPT ontology, and explain how
it is constructed by using the Protégé tool.
Abstract: A recent neurospiking coding scheme for feature extraction from biosonar echoes of various plants is examined with avariety of stochastic classifiers. Feature vectors derived are employedin well-known stochastic classifiers, including nearest-neighborhood,single Gaussian and a Gaussian mixture with EM optimization.Classifiers' performances are evaluated by using cross-validation and bootstrapping techniques. It is shown that the various classifers perform equivalently and that the modified preprocessing configuration yields considerably improved results.
Abstract: An appropriate method for fault identification and classification on extra high voltage transmission line using discrete wavelet transform is proposed in this paper. The sharp variations of the generated short circuit transient signals which are recorded at the sending end of the transmission line are adopted to identify the fault. The threshold values involve fault classification and these are done on the basis of the multiresolution analysis. A comparative study of the performance is also presented for Discrete Fourier Transform (DFT) based Artificial Neural Network (ANN) and Discrete Wavelet Transform (DWT). The results prove that the proposed method is an effective and efficient one in obtaining the accurate result within short duration of time by using Daubechies 4 and 9. Simulation of the power system is done using MATLAB.
Abstract: This study determines the effect of naked and heparinbased
super-paramagnetic iron oxide nanoparticles on the human
cancer cell lines of A2780. Doxorubicin was used as the anticancer
drug, entrapped in the SPIO-NPs. This study aimed to decorate
nanoparticles with heparin, a molecular ligand for 'active' targeting
of cancerous cells and the application of modified-nanoparticles in
cancer treatment. The nanoparticles containing the anticancer drug
DOX were prepared by a solvent evaporation and emulsification
cross-linking method. The physicochemical properties of the
nanoparticles were characterized by various techniques, and uniform
nanoparticles with an average particle size of 110±15 nm with high
encapsulation efficiencies (EE) were obtained. Additionally, a
sustained release of DOX from the SPIO-NPs was successful.
Cytotoxicity tests showed that the SPIO-DOX-HP had higher cell
toxicity than the individual HP and confocal microscopy analysis
confirmed excellent cellular uptake efficiency. These results indicate
that HP based SPIO-NPs have potential uses as anticancer drug
carriers and also have an enhanced anticancer effect.
Abstract: This paper presents a new sensor-based online method for generating collision-free near-optimal paths for mobile robots pursuing a moving target amidst dynamic and static obstacles. At each iteration, first the set of all collision-free directions are calculated using velocity vectors of the robot relative to each obstacle and target, forming the Directive Circle (DC), which is a novel concept. Then, a direction close to the shortest path to the target is selected from feasible directions in DC. The DC prevents the robot from being trapped in deadlocks or local minima. It is assumed that the target's velocity is known, while the speeds of dynamic obstacles, as well as the locations of static obstacles, are to be calculated online. Extensive simulations and experimental results demonstrated the efficiency of the proposed method and its success in coping with complex environments and obstacles.
Abstract: The present study deals with the analysis of the cylindrical part of a CNG storage vessel, combining a plastic liner and an over wrapped filament wound composite. Three kind of polymer are used in the present analysis: High density Polyethylene HDPE, Light low density Polyethylene LLDPE and finally blend of LLDPE/HDPE. The effect of the mechanical properties on the behavior of type IV vessel may be then investigated. In the present paper, the effect of the order of the circumferential winding on the stacking sequence may be then investigated. Based on mechanical considerations, the present model provides an exact solution for stresses and deformations on the cylindrical section of the vessel under thermo-mechanical static loading. The result show a good behavior of HDPE liner compared to the other plastic materials. The presence of circumferential winding angle in the stacking improves the rigidity of vessel by improving the burst pressure.