Abstract: This paper presents a multi-objective formulation for
optimal siting and sizing of distributed generation (DG) resources in
distribution systems in order to minimize the cost of power losses
and energy not supplied. The implemented technique is based on
particle swarm optimization (PSO) and weight method that employed
to obtain the best compromise between these costs. Simulation
results on 33-bus distribution test system are presented to
demonstrate the effectiveness of the proposed procedure.
Abstract: Nowadays, keyless entry systems are widely adopted
for vehicle immobilizer systems due to both advantages of security and
convenience. Keyless entry systems could overcome brute-force key
guessing attack, statistics attack and masquerade attack, however,
they can't prevent from thieves stealing behavior. In this paper, we
proposed a new architecture try to improve the existent flaws. The
integration of the keyless entry system and the fingerprint
identification technology is more suitable to implement on the
portable transponder to achieve higher security needs. We also adopt
and modify AES security protocol for life expectancy and security of
the portable transponder. In addition, the identification of a driver's
fingerprint makes the service of automatic reinstatement of a driver's
preferences become possible. Our design can satisfy not only the three
kinds of previous illegal attacks, but also the stealing situation.
Furthermore, many practical factors, such as costs, life expectancy and
performance, have been well considered in the design of portable
transponder.
Abstract: In today-s world, the efficient utilization of wood
resources comes more and more to the mind of forest owners. It is a
very complex challenge to ensure an efficient harvest of the wood
resources. This is one of the scopes the project “Virtual Forest II"
addresses. Its core is a database with data about forests containing
approximately 260 million trees located in North Rhine-Westphalia
(NRW). Based on this data, tree growth simulations and wood
mobilization simulations can be conducted. This paper focuses on the
latter. It describes a discrete-event-simulation with an attached 3-D
real time visualization which simulates timber harvest using trees
from the database with different crop resources. This simulation can
be displayed in 3-D to show the progress of the wood crop. All the
data gathered during the simulation is presented as a detailed
summary afterwards. This summary includes cost-benefit
calculations and can be compared to those of previous runs to
optimize the financial outcome of the timber harvest by exchanging
crop resources or modifying their parameters.
Abstract: In today-s competitive market, most companies
develop manufacturing systems that can help in cost reduction and
maximum quality. Human issues are an important part of
manufacturing systems, yet most companies ignore their effects on
production performance. This paper aims to developing an integrated
workforce planning system that incorporates the human being.
Therefore, a multi-objective mixed integer nonlinear programming
model is developed to determine the amount of hiring, firing,
training, overtime for each worker type. This paper considers a
workforce planning model including human aspects such as skills,
training, workers- personalities, capacity, motivation, and learning
rates. This model helps to minimize the hiring, firing, training and
overtime costs, and maximize the workers- performance. The results
indicate that the workers- differences should be considered in
workforce scheduling to generate realistic plans with minimum costs.
This paper also investigates the effects of human learning rates on the
performance of the production systems.
Abstract: The main objectives of this study were to identify
attributes that influence customer satisfaction and determine their
relationships with customer satisfaction. The variables included in
this research are place/ambience, food quality and service quality as
independent variables and customer satisfaction as the dependent
variable. A survey questionnaire which consisted of three parts to
measure demographic factors, independent variables, and dependent
variables was constructed based on items determined by past
research. 149 respondents from one of the well known hotel in Kuala
Lumpur, MALAYSIA were selected as a sample. Psychometric
testing was conducted to determine the reliability and validity of the
questionnaire. From the findings, there were positive significant
relationship between place/ambience (r=0.563**, p=0.000) and
service quality (r=0.544**, p=0.000) with customer satisfaction.
However, although relationship between food quality and customer
satisfaction was significant, it was in the negative direction (r=-
0.268**, p=0.001). New findings were discovered after conducting
this research and previous research findings were strengthened by the
results of this research. Future researchers could concentrate on
determining attributes that influence customer satisfaction when
cost/price is not a factor and reasons for place/ambience is currently
becoming the leading factor in determining customer satisfaction.
Abstract: The international society focuses on the environment
protection and natural energy sources control for the global
cooperation against weather change and sustainable growth. The study
presents the overview of the water shortage status and the necessity of wastewater reuse facility in military facilities and for the possibility of
the introduction, compares the economics by means of cost-benefit
analysis. The military features such as the number of users of military barracks and the water use were surveyed by the design principles by
facility types, the application method of wastewater reuse facility was selected, the feed water, its application and the volume of reuse volume were defined and the expectation was estimated, confirming
the possibility of introducing a wastewater reuse possibility by means of cost-benefit analysis.
Abstract: Recently, the Spherical Motion Models (SMM-s) have been introduced [1]. These new models have been developed for 3D local landmark-base Autonomous Navigation (AN). This paper is revealing new arguments and experimental results to support the SMM-s characteristics. The accuracy and the robustness in performing a specific task are the main concerns of the new investigations. To analyze their performances of the SMM-s, the most powerful tools of estimation theory, the extended Kalman filter (EKF) and unscented Kalman filter (UKF), which give the best estimations in noisy environments, have been employed. The Monte Carlo validation implementations used to test the stability and robustness of the models have been employed as well.
Abstract: The prediction of meteorological parameters at a
meteorological station is an interesting and open problem. A firstorder
linear dynamic model GM(1,1) is the main component of the
grey system theory. The grey model requires only a few previous data
points in order to make a real-time forecast. In this paper, we
consider the daily average ambient temperature as a time series and
the grey model GM(1,1) applied to local prediction (short-term
prediction) of the temperature. In the same case study we use a fuzzy
predictive model for global prediction. We conclude the paper with a
comparison between local and global prediction schemes.
Abstract: In this paper the authors present the framework of a
system for assisting users through counseling on personal health, the
Personal Health Assistance Service Expert System (PHASES).
Personal health assistance systems need Personal Health Records
(PHR), which support wellness activities, improve the understanding
of personal health issues, enable access to data from providers of
health services, strengthen health promotion, and in the end improve
the health of the population. This is especially important in societies
where the health costs increase at a higher rate than the overall
economy. The most important elements of a healthy lifestyle are
related to food (such as balanced nutrition and diets), activities for
body fitness (such as walking, sports, fitness programs), and other
medical treatments (such as massage, prescriptions of drugs). The
PHASES framework uses an ontology of food, which includes
nutritional facts, an expert system keeping track of personal health
data that are matched with medical treatments, and a comprehensive
data transfer between patients and the system.
Abstract: Computational techniques derived from digital image processing are playing a significant role in the security and digital copyrights of multimedia and visual arts. This technology has the effect within the domain of computers. This research presents discrete M-band wavelet transform (MWT) and cosine transform (DCT) based watermarking algorithm by incorporating the principal component analysis (PCA). The proposed algorithm is expected to achieve higher perceptual transparency. Specifically, the developed watermarking scheme can successfully resist common signal processing, such as geometric distortions, and Gaussian noise. In addition, the proposed algorithm can be parameterized, thus resulting in more security. To meet these requirements, the image is transformed by a combination of MWT & DCT. In order to improve the security further, we randomize the watermark image to create three code books. During the watermark embedding, PCA is applied to the coefficients in approximation sub-band. Finally, first few component bands represent an excellent domain for inserting the watermark.
Abstract: The error monitoring and processing system, EMPS is
the system located in the substantia nigra of the midbrain, basal
ganglia and cortex of the forebrain, and plays a leading role in error
detection and correction. The main components of EMPS are the
dopaminergic system and anterior cingulate cortex. Although, recent
studies show that alcohol disrupts the EMPS, the ways in which
alcohol affects this system are poorly understood. Based on current
literature data, here we suggest a hypothesis of alcohol-related
glucose-dependent system of error monitoring and processing, which
holds that the disruption of the EMPS is related to the competency of
glucose homeostasis regulation, which in turn may determine the
dopamine level as a major component of EMPS. Alcohol may
indirectly disrupt the EMPS by affecting dopamine level through
disorders in blood glucose homeostasis regulation.
Abstract: This study presents energy saving in general-purpose
pumps widely used in industrial applications. Such pumps are
normally driven by a constant-speed electrical motor which in most
applications must support varying load conditions. This is equivalent
to saying the loading conditions mismatch the designed optimal
energy consumption requirements of the intended application thus
resulting in substantial energy losses. In the held experiments it was
indicated that combination of mechanical and electrical speed drives
can contribute to lower energy consumption in the pump without
negatively distorting the required performance indices of a typical
centrifugal pump at substantially lower energy consumption. The
registered energy savings were recorded to be within the 15-40%
margin. It was also indicated that although VSDs are installed at a
cost, the financial burden is balanced against the earnings resulting
from the associated energy savings.
Abstract: Increasing user comfort and reducing operation costs
have always been primary objectives of lighting control strategies in a
building. This paper proposes an architecture of the lighting control
system for a daylit office. The system consists of the lighting
controller, A/D & D/A converter, dimmable LED lights, and the
lighting management software. Verification tests are conducted using
the proposed system specialized for the interior lighting of a open-plan
office. The results showed the proposed architecture of the lighting
system would improve the overall system reliability, lower the system
cost, and provide ease of installation and maintenance.
Abstract: Reducing energy consumption of embedded systems requires careful memory management. It has been shown that Scratch- Pad Memories (SPMs) are low size, low cost, efficient (i.e. energy saving) data structures directly managed at the software level. In this paper, the focus is on heuristic methods for SPMs management. A method is efficient if the number of accesses to SPM is as large as possible and if all available space (i.e. bits) is used. A Tabu Search (TS) approach for memory management is proposed which is, to the best of our knowledge, a new original alternative to the best known existing heuristic (BEH). In fact, experimentations performed on benchmarks show that the Tabu Search method is as efficient as BEH (in terms of energy consumption) but BEH requires a sorting which can be computationally expensive for a large amount of data. TS is easy to implement and since no sorting is necessary, unlike BEH, the corresponding sorting time is saved. In addition to that, in a dynamic perspective where the maximum capacity of the SPM is not known in advance, the TS heuristic will perform better than BEH.
Abstract: Ever since industrial revolution began, our ecosystem
has changed. And indeed, the negatives outweigh the positives.
Industrial waste usually released into all kinds of body of water, such
as river or sea. Tempeh waste is one example of waste that carries
many hazardous and unwanted substances that will affect the
surrounding environment. Tempeh is a popular fermented food in
Asia which is rich in nutrients and active substances. Tempeh liquid
waste- in particular- can cause an air pollution, and if penetrates
through the soil, it will contaminates ground-water, making it
unavailable for the water to be consumed. Moreover, bacteria will
thrive within the polluted water, which often responsible for causing
many kinds of diseases. The treatment used for this chemical waste is
biological treatment such as constructed wetland and activated
sludge. These kinds of treatment are able to reduce both physical and
chemical parameters altogether such as temperature, TSS, pH, BOD,
COD, NH3-N, NO3-N, and PO4-P. These treatments are implemented
before the waste is released into the water. The result is a
comparation between constructed wetland and activated sludge,
along with determining which method is better suited to reduce the
physical and chemical subtances of the waste.
Abstract: A key element of many distribution systems is the
routing and scheduling of vehicles servicing a set of customers. A
wide variety of exact and approximate algorithms have been
proposed for solving the vehicle routing problems (VRP). Exact
algorithms can only solve relatively small problems of VRP, which is
classified as NP-Hard. Several approximate algorithms have proven
successful in finding a feasible solution not necessarily optimum.
Although different parts of the problem are stochastic in nature; yet,
limited work relevant to the application of discrete event system
simulation has addressed the problem. Presented here is optimization
using simulation of VRP; where, a simplified problem has been
developed in the ExtendSimTM simulation environment; where,
ExtendSimTM evolutionary optimizer is used to minimize the total
transportation cost of the problem. Results obtained from the model
are very satisfactory. Further complexities of the problem are
proposed for consideration in the future.
Abstract: The drastic increase in the usage of SMS technology
has led service providers to seek for a solution that enable users of
mobile devices to access services through SMSs. This has resulted in
the proposal of solutions towards SMS-based service invocation in
service oriented environments. However, the dynamic nature of
service-oriented environments coupled with sudden load peaks
generated by service request, poses performance challenges to
infrastructures for supporting SMS-based service invocation. To
address this problem we adopt load balancing techniques. A load
balancing model with adaptive load balancing and load monitoring
mechanisms as its key constructs is proposed. The load balancing
model then led to realization of Least Loaded Load Balancing
Framework (LLLBF). Evaluation of LLLBF benchmarked with round
robin (RR) scheme on the queuing approach showed LLLBF
outperformed RR in terms of response time and throughput.
However, LLLBF achieved better result in the cost of high
processing power.
Abstract: Flow field around hypersonic vehicles is very
complex and difficult to simulate. The boundary layers are squeezed
between shock layer and body surface. Resolution of boundary layer,
shock wave and turbulent regions where the flow field has high
values is difficult of capture. Detached eddy simulation (DES) is a
modification of a RANS model in which the model switches to a
subgrid scale formulation in regions fine enough for LES
calculations. Regions near solid body boundaries and where the
turbulent length scale is less than the maximum grid dimension are
assigned the RANS mode of solution. As the turbulent length scale
exceeds the grid dimension, the regions are solved using the LES
mode. Therefore the grid resolution is not as demanding as pure LES,
thereby considerably cutting down the cost of the computation. In
this research study hypersonic flow is simulated at Mach 8 and
different angle of attacks to resolve the proper boundary layers and
discontinuities. The flow is also simulated in the long wake regions.
Mesh is little different than RANS simulations and it is made dense
near the boundary layers and in the wake regions to resolve it
properly. Hypersonic blunt cone cylinder body with frustrum at angle
5o and 10 o are simulated and there aerodynamics study is performed
to calculate aerodynamics characteristics of different geometries. The
results and then compared with experimental as well as with some
turbulence model (SA Model). The results achieved with DES
simulation have very good resolution as well as have excellent
agreement with experimental and available data. Unsteady
simulations are performed for DES calculations by using duel time
stepping method or implicit time stepping. The simulations are
performed at Mach number 8 and angle of attack from 0o to 10o for
all these cases. The results and resolutions for DES model found
much better than SA turbulence model.
Abstract: As is needless to say; a majority of accidents, which occur, are due to drunk driving. As such, there is no effective mechanism to prevent this. Here we have designed an integrated system for the same purpose. Alcohol content in the driver-s body is detected by means of an infrared breath analyzer placed at the steering wheel. An infrared cell directs infrared energy through the sample and any unabsorbed energy at the other side is detected. The higher the concentration of ethanol, the more infrared absorption occurs (in much the same way that a sunglass lens absorbs visible light, alcohol absorbs infrared light). Thus the alcohol level of the driver is continuously monitored and calibrated on a scale. When it exceeds a particular limit the fuel supply is cutoff. If the device is removed also, the fuel supply will be automatically cut off or an alarm is sounded depending upon the requirement. This does not happen abruptly and special indicators are fixed at the back to avoid inconvenience to other drivers using the highway signals. Frame work for integration of sensors and control module in a scalable multi-agent system is provided .A SMS which contains the current GPS location of the vehicle is sent via a GSM module to the police control room to alert the police. The system is foolproof and the driver cannot tamper with it easily. Thus it provides an effective and cost effective solution for the problem of drunk driving in vehicles.
Abstract: Along with the progress of our information society,
various risks are becoming increasingly common, causing multiple social problems. For this reason, risk communications for
establishing consensus among stakeholders who have different
priorities have become important. However, it is not always easy for the decision makers to agree on measures to reduce risks based on
opposing concepts, such as security, privacy and cost. Therefore, we previously developed and proposed the “Multiple Risk Communicator" (MRC) with the following functions: (1) modeling
the support role of the risk specialist, (2) an optimization engine, and (3) displaying the computed results. In this paper, MRC program
version 1.0 is applied to the personal information leakage problem. The application process and validation of the results are discussed.