Abstract: This paper attempts to explain response components of Electrovestibulography (EVestG) using a computer simulation of a three-canal model of the vestibular system. EVestG is a potentially new diagnostic method for Meniere's disease. EVestG is a variant of Electrocochleography (ECOG), which has been used as a standard method for diagnosing Meniere's disease - it can be used to measure the SP/AP ratio, where an SP/AP ratio greater than 0.4-0.5 is indicative of Meniere-s Disease. In EVestG, an applied head tilt replaces the acoustic stimulus of ECOG. The EVestG output is also an SP/AP type plot, where SP is the summing potential, and AP is the action potential amplitude. AP is thought of as being proportional to the size of a population of afferents in an excitatory neural firing state. A simulation of the fluid volume displacement in the vestibular labyrinth in response to various types of head tilts (ipsilateral, backwards and horizontal rotation) was performed, and a simple neural model based on these simulations developed. The simple neural model shows that the change in firing rate of the utricle is much larger in magnitude than the change in firing rates of all three semi-circular canals following a head tilt (except in a horizontal rotation). The data suggests that the change in utricular firing rate is a minimum 2-3 orders of magnitude larger than changes in firing rates of the canals during ipsilateral/backward tilts. Based on these results, the neural response recorded by the electrode in our EVestG recordings is expected to be dominated by the utricle in ipsilateral/backward tilts (It is important to note that the effect of the saccule and efferent signals were not taken into account in this model). If the utricle response dominates the EVestG recordings as the modeling results suggest, then EVestG has the potential to diagnose utricular hair cell damage due to a viral infection (which has been cited as one possible cause of Meniere's Disease).
Abstract: The objectives of this research were to compare the success of SME registered in Nakorn Pathom Province divided in personal data also to study the relations between the innovation knowledge and capability and the success of SME registered in Nakorn Pathom Province and to study the relations between the work efficiency and the success of SME registered in Nakorn Pathom Province. A questionnaire was utilized as a tool to collect data. Statistics utilized in this research included frequency, percentage, mean, standard deviation, and multiple regression analysis. Data were analyzed by using Statistical Package for the Social Sciences.The findings revealed that the majority of respondents were male with the age between 25-34 years old, hold undergraduate degree, married and stay together. The average income of respondents was between 10,001-20,000 baht. It also found that in terms of innovation knowledge and capability, there were two variables had an influence on the amount of innovation knowledge and capability, innovation evaluation which were physical characteristic and innovation process.
Abstract: Set covering problem is a classical problem in
computer science and complexity theory. It has many applications,
such as airline crew scheduling problem, facilities location problem,
vehicle routing, assignment problem, etc. In this paper, three
different techniques are applied to solve set covering problem.
Firstly, a mathematical model of set covering problem is introduced
and solved by using optimization solver, LINGO. Secondly, the
Genetic Algorithm Toolbox available in MATLAB is used to solve
set covering problem. And lastly, an ant colony optimization method
is programmed in MATLAB programming language. Results
obtained from these methods are presented in tables. In order to
assess the performance of the techniques used in this project, the
benchmark problems available in open literature are used.
Abstract: Existing image-based virtual reality applications
allow users to view image-based 3D virtual environment in a more
interactive manner. User could “walkthrough"; looks left, right, up
and down and even zoom into objects in these virtual worlds of
images. However what the user sees during a “zoom in" is just a
close-up view of the same image which was taken from a distant.
Thus, this does not give the user an accurate view of the object from
the actual distance. In this paper, a simple technique for zooming in
an object in a virtual scene is presented. The technique is based on
the 'hotspot' concept in existing application. Instead of navigation
between two different locations, the hotspots are used to focus into
an object in the scene. For each object, several hotspots are created.
A different picture is taken for each hotspot. Each consecutive
hotspot created will take the user closer to the object. This will
provide the user with a correct of view of the object based on his
proximity to the object. Implementation issues and the relevance of
this technique in potential application areas are highlighted.
Abstract: Geographical Information Systems are an integral part
of planning in modern technical systems. Nowadays referred to as
Spatial Decision Support Systems, as they allow synergy database
management systems and models within a single user interface
machine and they are important tools in spatial design for
evaluating policies and programs at all levels of administration.
This work refers to the creation of a Geographical Information
System in the context of a broader research in the area of influence
of an under construction station of the new metro in the Greek
city of Thessaloniki, which included statistical and multivariate
data analysis and diagrammatic representation, mapping and
interpretation of the results.
Abstract: The mathematical modeling of different biological
processes is usually used to predict or assess behavior of systems in
which these processes take place. This study deals with mathematical
and computer modeling of bi-substrate enzymatic reactions with
ping-pong mechanism, which play an important role in different
biochemical pathways. Besides that, three models of competitive
inhibition were designed using different software packages. The main
objective of this study is to represent the results from in silico
investigation of bi-substrate enzymatic reactions with ordered pingpong
mechanism in the presence of competitive inhibitors, as well as
to describe in details the inhibition effects. The simulation of the
models with certain kinetic parameters allowed investigating the
behavior of reactions as well as determined some interesting aspects
concerning influence of different cases of competitive inhibition.
Simultaneous presence of two inhibitors, competitive to the S1 and S2
substrates have been studied. Moreover, we have found the pattern of
simultaneous influence of both inhibitors.
Abstract: This research documents a qualitative study of
selected Native Americans who have successfully graduated from
mainstream higher education institutions. The research framework
explored the Bicultural Identity Formation Model as a means of
understanding the expressions of the students' adaptations to
mainstream education. This approach lead to an awareness of how
the participants in the study used specific cultural and social
strategies to enhance their educational success and also to an
awareness of how they coped with cultural dissonance to achieve a
new academic identity. Research implications impact a larger
audience of bicultural, foreign, or international students experiencing
cultural dissonance.
Abstract: This research presents a fuzzy multi-objective model
for a machine selection problem in a flexible manufacturing system
of a tire company. Two main objectives are minimization of an
average machine error and minimization of the total setup time.
Conventionally, the working team uses trial and error in selecting a
pressing machine for each task due to the complexity and constraints
of the problem. So, both objectives may not satisfy. Moreover, trial
and error takes a lot of time to get the final decision. Therefore, in
this research preemptive fuzzy goal programming model is developed
for solving this multi-objective problem. The proposed model can
obtain the appropriate results that the Decision Making (DM) is
satisfied for both objectives. Besides, alternative choice can be easily
generated by varying the satisfaction level. Additionally, decision
time can be reduced by using the model, which includes all
constraints of the system to generate the solutions. A numerical
example is also illustrated to show the effectiveness of the proposed
model.
Abstract: Bandung city center can be deemed as economic, social and cultural center. However the city center suffers from deterioration. The retail activities tend to shift outward the city center. Numerous idyllic residences changed into business premises in two villages situated in the north part of the city during 1990s, especially after a new highway and flyover opened. According to space syntax theory, the pattern of spatial integration in the urban grid is a prime determinant of movement patterns in the system. The syntactic analysis results show the flyover has insignificant influence on street network in the city center. However the flyover has been generating a major difference in the new commercial area since it has become relatively as strategic as the city center. Besides street network, local government policy, rapid private motorization and particular condition of each site also played important roles in encouraging the current commercial areas to flourish.
Abstract: The purpose of this study was to investigate the
relationship between parent involvement and preschool disabled
children’s development. Parents of 3 year old disabled children
(N=440) and 5 year old disabled children (N=937) participating in the
Special Needs Education Longitudinal Study were interviewed or
answered the web design questionnaire about their actions in parenting
their disabled children. These children’s developments were also
evaluated by their teachers. Data were analyzed using Structural
Equation Modeling. Results were showed by tables and figures. Based
on the results, the researcher made some suggestions for future studies.
Abstract: Rutting is one of the major load-related distresses in airport flexible pavements. Rutting in paving materials develop gradually with an increasing number of load applications, usually appearing as longitudinal depressions in the wheel paths and it may be accompanied by small upheavals to the sides. Significant research has been conducted to determine the factors which affect rutting and how they can be controlled. Using the experimental design concepts, a series of tests can be conducted while varying levels of different parameters, which could be the cause for rutting in airport flexible pavements. If proper experimental design is done, the results obtained from these tests can give a better insight into the causes of rutting and the presence of interactions and synergisms among the system variables which have influence on rutting. Although traditionally, laboratory experiments are conducted in a controlled fashion to understand the statistical interaction of variables in such situations, this study is an attempt to identify the critical system variables influencing airport flexible pavement rut depth from a statistical DoE perspective using real field data from a full-scale test facility. The test results do strongly indicate that the response (rut depth) has too much noise in it and it would not allow determination of a good model. From a statistical DoE perspective, two major changes proposed for this experiment are: (1) actual replication of the tests is definitely required, (2) nuisance variables need to be identified and blocked properly. Further investigation is necessary to determine possible sources of noise in the experiment.
Abstract: This paper presents the application of discrete-time
variable structure control with sliding mode based on the 'reaching
law' method for robust control of a 'simple inverted pendulum on
moving cart' - a standard nonlinear benchmark system. The
controllers designed using the above techniques are completely
insensitive to parametric uncertainty and external disturbance. The
controller design is carried out using pole placement technique to find
state feedback gain matrix , which decides the dynamic behavior
of the system during sliding mode. This is followed by feedback gain
realization using the control law which is synthesized from 'Gao-s
reaching law'. The model of a single inverted pendulum and the
discrete variable structure control controller are developed, simulated
in MATLAB-SIMULINK and results are presented. The response of
this simulation is compared with that of the discrete linear quadratic
regulator (DLQR) and the advantages of sliding mode controller over
DLQR are also presented
Abstract: Group key management is an important functional
building block for any secure multicast architecture.
Thereby, it has been extensively studied in the literature.
In this paper we present relevant group key management
protocols. Then, we compare them against some pertinent
performance criteria.
Abstract: We successfully developed and tested a new
separation layer solving problems with unmanageable deposits inside the boilers of Zluticka Heating Plant. The deposits are mainly created
by glass-forming melts. We plotted straw ash compositions in K2OCaO-
SiO2 phase diagram and illustrated that they are in the area of low-melting eutectic points. To prevent the melting of ash and the
formation of deposits, we modified ash compositions by injecting additives into biomass fuel, and thus effectively suppressed deposits in a burner.
Abstract: During the last decade ultrafine grained (UFG) and nano-structured (NS) materials have experienced a rapid development. In this research work finite element analysis has been carried out to investigate the plastic strain distribution in equal channel angular process (ECAP). The magnitudes of Standard deviation (S. D.) and inhomogeneity index (Ci) were compared for different ECAP passes. Verification of a three-dimensional finite element model was performed with experimental tests. Finally the mechanical property including impact energy of ultrafine grained pure commercially pure Aluminum produced by severe plastic deformation method has been examined. For this aim, equal channel angular pressing die with the channel angle, outer corner angle and channel diameter of 90°, 20° and 20mm had been designed and manufactured. Commercial pure Aluminum billets were ECAPed up to four passes by route BC at the ambient temperature. The results indicated that there is a great improvement at the hardness measurement, yield strength and ultimate tensile strength after ECAP process. It is found that the magnitudes of HV reach 67HV from 21HV after the final stage of process. Also, about 330% and 285% enhancement at the YS and UTS values have been obtained after the fourth pass as compared to the as-received conditions, respectively. On the other hand, the elongation to failure and impact energy have been reduced by 23% and 50% after imposing four passes of ECAP process, respectively.
Abstract: The aim of this investigation is to study the
performance of the new generation of the PVD coated grade and to
map the influence of cutting conditions on the tool life in milling of
ADI (Austempered Ductile Iron). The results show that chipping is
the main wear mechanism which determines the tool life in dry
condition and notch wear in wet condition for this application. This
due to the different stress mechanisms and preexisting cracks in the
coating. The wear development shows clearly that the new PVD
coating (C20) has the best ability to delay the chipping growth. It
was also found that a high content of Al in the new coating (C20)
was especially favorable compared to a TiAlN multilayer with lower
Al content (C30) or CVD coating. This is due to fine grains and low
compressive stress level in the coating which increase the coating
ability to withstand the mechanical and thermal impact. It was also
found that the use of coolant decreases the tool life with 70-80%
compare to dry milling.
Abstract: A potential flow model is used to study the unsteady
flow past two airfoils in configuration, each of which is suddenly set
into motion. The airfoil bound vortices are modeled using lumped
vortex elements and the wake behind the airfoil is modeled by discrete
vortices. This consists of solving a steady state flow problem at each
time-step where unsteadiness is incorporated through the “zero normal
flow on a solid surface" boundary condition at every time instant.
Additionally, along with the “zero normal flow on a solid surface"
boundary condition Kelvin-s condition is used to compute the strength
of the latest wake vortex shed from the trailing edge of the airfoil.
Location of the wake vortices is updated at each time-step to get the
wake shape at each time instant. Results are presented to show the
effect of airfoil-airfoil interaction and airfoil-wake interaction on the
aerodynamic characteristics of each airfoil.
Abstract: The purpose of this paper is to summarize the
following protection of scouring countermeasures by using
Bentonite-Enhanced Sand (BES) mixtures. The concept of
underground improvement is being used in this study to reduce the
void of the sand. The sand bentonite mixture was used to bond the
ground soil conditions surrounding the pile of integral bridge. The
right composition of sand bentonite mixture was proposed based on
previous findings. The swelling effect of bentonite also was
investigated to ensure there is no adverse impact to the structure of
the integral bridge. ScourScour, another name for severe erosion,
occurs when the erosive capacity of water resulting from natural and
manmade events exceeds the ability of earth materials to resist its
effects. According to AASHTO LRFD Specifications (Section
C3.7.5), scour is the most common reason for the collapse of
highway bridges in the United States
Abstract: This paper propose a new circuit design which
monitor total leakage current during standby mode and generates the
optimal reverse body bias voltage, by using the adaptive body bias
(ABB) technique to compensate die-to-die parameter variations.
Design details of power monitor are examined using simulation
framework in 65nm and 32nm BTPM model CMOS process.
Experimental results show the overhead of proposed circuit in terms
of its power consumption is about 10 μW for 32nm technology and
about 12 μW for 65nm technology at the same power supply voltage
as the core power supply. Moreover the results show that our
proposed circuit design is not far sensitive to the temperature
variations and also process variations. Besides, uses the simple
blocks which offer good sensitivity, high speed, the continuously
feedback loop.
Abstract: Nonlinear system identification is becoming an important tool which can be used to improve control performance. This paper describes the application of adaptive neuro-fuzzy inference system (ANFIS) model for controlling a car. The vehicle must follow a predefined path by supervised learning. Backpropagation gradient descent method was performed to train the ANFIS system. The performance of the ANFIS model was evaluated in terms of training performance and classification accuracies and the results confirmed that the proposed ANFIS model has potential in controlling the non linear system.