Abstract: The practice of burying the solid waste under the ground is one of the waste disposal methods and dumping is known as an ultimate method in the fastest-growing cities like Rasht city in Iran. Some municipalities select the solid waste landfills without feasibility studies, programming, design and management plans. Therefore, several social and environmental impacts are created by these sites. In this study, the suitability of solid waste landfill in Rasht city, capital of Gilan Province is reviewed using Regional Screening Method (RSM), Geographic Information System (GIS) and Analytical Hierarchy Process (AHP). The results indicated that according to the suitability maps, the value of study site is midsuitable to suitable based on RSM and mid-suitable based on AHP.
Abstract: Case-Based Reasoning (CBR) is one of machine
learning algorithms for problem solving and learning that caught a lot
of attention over the last few years. In general, CBR is composed of
four main phases: retrieve the most similar case or cases, reuse the
case to solve the problem, revise or adapt the proposed solution, and
retain the learned cases before returning them to the case base for
learning purpose. Unfortunately, in many cases, this retain process
causes the uncontrolled case base growth. The problem affects
competence and performance of CBR systems. This paper proposes
competence-based maintenance method based on deletion policy
strategy for CBR. There are three main steps in this method. Step 1,
formulate problems. Step 2, determine coverage and reachability set
based on coverage value. Step 3, reduce case base size. The results
obtained show that this proposed method performs better than the
existing methods currently discussed in literature.
Abstract: Dilated cardiomyopathy (DCM) is a severe
cardiovascular disorder characterized by progressive systolic
dysfunction due to cardiac chamber dilatation and inefficient
myocardial contractility often leading to chronic heart failure.
Recently, a genome-wide association studies (GWASs) on DCM
indicate that the ZBTB17 gene rs10927875 single nucleotide
polymorphism is associated with DCM. The aim of the study was to
identify the distribution of ZBTB17 gene rs10927875 polymorphism
in 50 Slovak patients with DCM and 80 healthy control subjects
using the Custom Taqman®SNP Genotyping assays. Risk factors
detected at baseline in each group included age, sex, body mass
index, smoking status, diabetes and blood pressure. The mean age of
patients with DCM was 52.9±6.3 years; the mean age of individuals
in control group was 50.3±8.9 years. The distribution of investigated
genotypes of rs10927875 polymorphism within ZBTB17 gene in the
cohort of Slovak patients with DCM was as follows: CC (38.8%), CT
(55.1%), TT (6.1%), in controls: CC (43.8%), CT (51.2%), TT
(5.0%). The risk allele T was more common among the patients with
dilated cardiomyopathy than in normal controls (33.7% versus
30.6%). The differences in genotype or allele frequencies of ZBTB17
gene rs10927875 polymorphism were not statistically significant
(p=0.6908; p=0.6098). The results of this study suggest that ZBTB17
gene rs10927875 polymorphism may be a risk factor for
susceptibility to DCM in Slovak patients with DCM. Studies of
numerous files and additional functional investigations are needed to
fully understand the roles of genetic associations.
Abstract: This paper analyses the non linear properties
exhibited by a drill string system under various un balanced mass
conditions. The drill string is affected by continuous friction in the
form of drill bit and well bore hole interactions. This paper proves
the origin of limit cycling and increase of non linearity with increase
in speed of the drilling in the presence of friction. The spectrum of
the frequency response is also studied to detect the presence of
vibration abnormalities arising during the drilling process.
Abstract: This paper analyzes different techniques of the fine grained security of relational databases for the two variables-data accessibility and inference. Data accessibility measures the amount of data available to the users after applying a security technique on a table. Inference is the proportion of information leakage after suppressing a cell containing secret data. A row containing a secret cell which is suppressed can become a security threat if an intruder generates useful information from the related visible information of the same row. This paper measures data accessibility and inference associated with row, cell, and column level security techniques. Cell level security offers greatest data accessibility as it suppresses secret data only. But on the other hand, there is a high probability of inference in cell level security. Row and column level security techniques have least data accessibility and inference. This paper introduces cell plus innocent security technique that utilizes the cell level security method but suppresses some innocent data to dodge an intruder that a suppressed cell may not necessarily contain secret data. Four variations of the technique namely cell plus innocent 1/4, cell plus innocent 2/4, cell plus innocent 3/4, and cell plus innocent 4/4 respectively have been introduced to suppress innocent data equal to 1/4, 2/4, 3/4, and 4/4 percent of the true secret data inside the database. Results show that the new technique offers better control over data accessibility and inference as compared to the state-of-theart security techniques. This paper further discusses the combination of techniques together to be used. The paper shows that cell plus innocent 1/4, 2/4, and 3/4 techniques can be used as a replacement for the cell level security.
Abstract: In this paper, we focused primarily on Istanbul data
that is gathered by using intelligent transportation systems (ITS), and
considered the developments in traffic information delivery and
future applications that are being planned for implementation. Since
traffic congestion is increasing and travel times are becoming less
consistent and less predictable, traffic information delivery has
become a critical issue. Considering the fuel consumption and wasted
time in traffic, advanced traffic information systems are becoming
increasingly valuable which enables travelers to plan their trips more
accurately and easily.
Abstract: The objective of this research was to study influence
parameters affecting to mechanical property of austenitic stainless
steel grade 304 (AISI 304) with Gas Metal Arc Welding (GMAW).
The research was applying factorial design experiment, which have
following interested parameters: welding current at 80, 90, and 100
Amps, welding speeds at 250, 300, and 350 mm/min, and shield gas
of 75% Ar + 25% CO2, 70% Ar + 25% CO2 + 5% O2 and 69.5% Ar +
25% CO2 + 5% O2 + 0.5% He gas. The study was done in following
aspects: ultimate tensile strength and elongation. A research study of
ultimate tensile strength found that main factor effect, which had the
highest strength to AISI 304 welding was shield gas of 70% Ar +
25% CO2 + 5% O2 at average of 954.81 N/mm2. Result of the highest
elongation was showed significantly different at interaction effect
between shield gas of 69.5%Ar+25%CO2+5%O2+.5%He and
welding speed at 250 mm/min at 47.94%.
Abstract: In this paper we proposed a novel method to acquire
the ROI (Region of interest) of unsupervised and touch-less palmprint
captured from a web camera in real-time. We use Viola-Jones
approach and skin model to get the target area in real time. Then an
innovative course-to-fine approach to detect the key points on the hand
is described. A new algorithm is used to find the candidate key points
coarsely and quickly. In finely stage, we verify the hand key points
with the shape context descriptor. To make the user much comfortable,
it can process the hand image with different poses, even the hand is
closed. Experiments show promising result by using the proposed
method in various conditions.
Abstract: Many water supply systems in Australia are currently
undergoing significant reconfiguration due to reductions in long term
average rainfall and resulting low inflows to water supply reservoirs
since the second half of the 20th century. When water supply systems
undergo change, it is necessary to develop new operating rules,
which should consider climate, because the climate change is likely
to further reduce inflows. In addition, water resource systems are
increasingly intended to be operated to meet complex and multiple
objectives representing social, economic, environmental and
sustainability criteria. This is further complicated by conflicting
preferences on these objectives from diverse stakeholders. This paper
describes a methodology to develop optimum operating rules for
complex multi-reservoir systems undergoing significant change,
considering all of the above issues. The methodology is demonstrated
using the Grampians water supply system in northwest Victoria,
Australia. Initial work conducted on the project is also presented in
this paper.
Abstract: Quantitative methods of economic decision-making as
the methodological base of the so called operational research
represent an important set of tools for managing complex economic
systems,both at the microeconomic level and on the macroeconomic
scale. Mathematical models of controlled and controlling processes
allow, by means of artificial experiments, obtaining information
foroptimalor optimum approaching managerial decision-making.The
quantitative methods of economic decision-making usually include a
methodology known as structural analysis -an analysisof
interdisciplinary production-consumption relations.
Abstract: Rainfall records of rainfall station including the
rainfall potential per hour and rainfall mass of five heavy storms are
explored, respectively from 2001 to 2010. The rationalization formula
is to investigate the capability of flood peak duration of flood
detention pond in different rainfall conditions. The stable flood
detention model is also proposed by using system dynamic control
theory to get the message of flood detention pond in this research.
When rainfall frequency of one hour rainfall duration is more than
100-year frequency which exceeds the flood detention standard of
20-year frequency for the flood detention pond, the flood peak
duration of flood detention pond is 1.7 hours at most even though the
flood detention pond with maximum drainage potential about 15.0
m3/s of pumping system is constructed. If the rainfall peak current is
more than maximum drainage potential, the flood peak duration of
flood detention pond is about 1.9 hours at most. The flood detention
pond is the key factor of stable drainage control and flood prevention.
The critical factors of flood disaster is not only rainfall mass, but also
rainfall frequency of heavy storm in different rainfall duration and
flood detention frequency of flood detention system.
Abstract: This paper provides a flexible way of controlling
Variable-Bit-Rate (VBR) of compressed digital video, applicable to
the new H264 video compression standard. The entire video
sequence is assessed in advance and the quantisation level is then set
such that bit rate (and thus the frame rate) remains within
predetermined limits compatible with the bandwidth of the
transmission system and the capabilities of the remote end, while at
the same time providing constant quality similar to VBR encoding.
A process for avoiding buffer starvation by selectively eliminating
frames from the encoded output at times when the frame rate is slow
(large number of bits per frame) will be also described. Finally, the
problem of buffer overflow will be solved by selectively eliminating
frames from the received input to the decoder. The decoder detects
the omission of the frames and resynchronizes the transmission by
monitoring time stamps and repeating frames if necessary.
Abstract: Nowadays data backup format doesn-t cease to appear raising so the anxiety on their accessibility and their perpetuity. XML is one of the most promising formats to guarantee the integrity of data. This article suggests while showing one thing man can do with XML. Indeed XML will help to create a data backup model. The main task will consist in defining an application in JAVA able to convert information of a database in XML format and restore them later.
Abstract: Among neural models the Support Vector Machine
(SVM) solutions are attracting increasing attention, mostly because
they eliminate certain crucial questions involved by neural network
construction. The main drawback of standard SVM is its high
computational complexity, therefore recently a new technique, the
Least Squares SVM (LS–SVM) has been introduced. In this paper we
present an extended view of the Least Squares Support Vector
Regression (LS–SVR), which enables us to develop new
formulations and algorithms to this regression technique. Based on
manipulating the linear equation set -which embodies all information
about the regression in the learning process- some new methods are
introduced to simplify the formulations, speed up the calculations
and/or provide better results.
Abstract: Turbine blade cooling is considered as the most
effective way of maintaining high operating temperature making use
of the available materials, and turbine systems with wet compression
have a potential for future power generation because of high efficiency
and high specific power with a relatively low cost. In this paper
performance analysis of wet-compression gas turbine cycle with
turbine blade cooling is carried out. The wet compression process is
analytically modeled based on non-equilibrium droplet evaporation.
Special attention is paid for the effects of pressure ratio and water
injection ratio on the important system variables such as ratio of
coolant fluid flow, fuel consumption, thermal efficiency and specific
power. Parametric studies show that wet compression leads to
insignificant improvement in thermal efficiency but significant
enhancement of specific power in gas turbine systems with turbine
blade cooling.
Abstract: Two cultivars ('Rutuliai', 'Saint Perrie') and five
hybrids ('Tolstoi', 'Brooklyn', 'Tocayo', 'Benito', 'Tourist') of edible
tomato (Lycopersicon esculentum Mill.) were investigated at the
LRCAF Institute of Horticulture. The following fruit quality
parameters were evaluated: the amount of lycopene, β-carotene,
ascorbic acid, total and inverted sugar, sucrose, dry matter soluble
solids in fresh tomato matter, also were determined fruit skin and
flesh firmness, color indexes (CIE L*a*b*) and calculated hue angle
(h°) with chroma (C).
Abstract: At present time, competition, unpredictable fluctuations have made communication engineering education in the global sphere really difficult. Confront with new situation in the engineering education sector. Communication engineering education has to be reformed and ready to use more advanced technologies. We realized that one of the general problems of student`s education is that after graduating from their universities, they are not prepared to face the real life challenges and full skilled to work in industry. They are prepared only to think like engineers and professionals but they also need to possess some others non-technical skills. In today-s environment, technical competence alone is not sufficient for career success. Employers want employees (graduate engineers) who have good oral and written communication (soft) skills. It does require for team work, business awareness, organization, management skills, responsibility, initiative, problem solving and IT competency. This proposed curriculum brings interactive, creative, interesting, effective learning methods, which includes online education, virtual labs, practical work, problem-based learning (PBL), and lectures given by industry experts. Giving short assignments, presentations, reports, research papers and projects students can significantly improve their non-technical skills. Also, we noticed the importance of using ICT technologies in engineering education which used by students and teachers, and included that into proposed teaching and learning methods. We added collaborative learning between students through team work which builds theirs skills besides course materials. The prospective on this research that we intent to update communication engineering curriculum in order to get fully constructed engineer students to ready for real industry work.
Abstract: Recently, Northeast Asia has become one of the three
largest trade areas, covering approximately 30% of the total trade
volume of the world. However, the distribution facilities are saturated
due to the increase in the transportation volume within the area and
with the European countries. In order to accommodate the increase of
the transportation volume, the transportation networking with the
major countries in Northeast Asia and Europe is absolutely necessary.
The Eurasian Logistics Network will develop into an international
passenger transportation network covering the Northeast Asian region
and an international freight transportation network connecting across
Eurasia Continent. This paper surveys the changes and trend of the
distribution network in the Eurasian Region according to the political,
economic and environmental changes of the region, analyses the
distribution network according to the changes in the transportation
policies of the related countries, and provides the direction of the
development of composite transportation on the basis of the present
conditions of transportation means. The transportation means optimal
for the efficiency of transportation system are suggested to be train
ferries, sea & rail or sea & rail & sea. It is suggested to develop
diversified composite transportation means and routes within the
boundary of international cooperation system.
Abstract: This paper proposes the analysis and design of robust
fuzzy control to Stochastic Parametrics Uncertaint Linear systems.
This system type to be controlled is partitioned into several linear
sub-models, in terms of transfer function, forming a convex polytope,
similar to LPV (Linear Parameters Varying) system. Once defined the
linear sub-models of the plant, these are organized into fuzzy Takagi-
Sugeno (TS) structure. From the Parallel Distributed Compensation
(PDC) strategy, a mathematical formulation is defined in the frequency
domain, based on the gain and phase margins specifications,
to obtain robust PI sub-controllers in accordance to the Takagi-
Sugeno fuzzy model of the plant. The main results of the paper are
based on the robust stability conditions with the proposal of one
Axiom and two Theorems.
Abstract: This paper proposes an architecture of dynamically
reconfigurable arithmetic circuit. Dynamic reconfiguration is a
technique to realize required functions by changing hardware
construction during operations. The proposed circuit is based on a
complex number multiply-accumulation circuit which is used
frequently in the field of digital signal processing. In addition, the
proposed circuit performs real number double precision arithmetic
operations. The data formats are single and double precision floating
point number based on IEEE754. The proposed circuit is designed
using VHDL, and verified the correct operation by simulations and
experiments.