Abstract: The bypass exhaust system of a 160 MW combined cycle has been modeled and analyzed using numerical simulation in 2D prospective. Analysis was carried out using the commercial numerical simulation software, FLUENT 6.2. All inputs were based on the technical data gathered from working conditions of a Siemens V94.2 gas turbine, installed in the Yazd power plant. This paper deals with reduction of pressure drop in bypass exhaust system using turning vanes mounted in diverter box in order to alleviate turbulent energy dissipation rate above diverter box. The geometry of such turning vanes has been optimized based on the flow pattern at diverter box inlet. The results show that the use of optimized turning vanes in diverter box can improve the flow pattern and eliminate vortices around sharp edges just before the silencer. Furthermore, this optimization could decrease the pressure drop in bypass exhaust system and leads to higher plant efficiency.
Abstract: Through the time, the higher education has changed
the learning system since mother tongue to bilingual, and in this new
century has been coming develop a multilingual education. All as
part of globalization process of the countries and the education.
Nevertheless, this change only has been effectively in countries of the
first world, the rest have been lagging. Therefore, these countries
require strengthen their higher education systems through models that
give way to multilingual and bilingual education. In this way, shows
a new model adapted from a systemic form to allow a higher
bilingual and multilingual education in Latin America. This
systematization aims to increase the skills and competencies
student’s, decrease the time learning of a second tongue, add to
multilingualism in the American Latin Universities, also, contribute
to position the region´s countries in a better global status, and
stimulate the development of new research in this area.
Abstract: Phishing scheme is a new emerged security issue of
E-Commerce Crime in globalization. In this paper, the legal scaffold
of Malaysia, United States and United Kingdom are analyzed and
followed by discussion on critical issues that rose due to phishing
activities. The result revealed that inadequacy of current legal
framework is the main challenge to govern this epidemic. However,
lack of awareness among consumers, crisis on merchant-s
responsibility and lack of intrusion reports and incentive arrangement
contributes to phishing proliferating. Prevention is always better than
curb. By the end of this paper, some best practices for consumers and
corporations are suggested.
Abstract: Heterogeneity of solid waste characteristics as well as the complex processes taking place within the landfill ecosystem motivated the implementation of soft computing methodologies such as artificial neural networks (ANN), fuzzy logic (FL), and their combination. The present work uses a hybrid ANN-FL model that employs knowledge-based FL to describe the process qualitatively and implements the learning algorithm of ANN to optimize model parameters. The model was developed to simulate and predict the landfill gas production at a given time based on operational parameters. The experimental data used were compiled from lab-scale experiment that involved various operating scenarios. The developed model was validated and statistically analyzed using F-test, linear regression between actual and predicted data, and mean squared error measures. Overall, the simulated landfill gas production rates demonstrated reasonable agreement with actual data. The discussion focused on the effect of the size of training datasets and number of training epochs.
Abstract: The inherent iterative nature of product design and development poses significant challenge to reduce the product design and development time (PD). In order to shorten the time to market, organizations have adopted concurrent development where multiple specialized tasks and design activities are carried out in parallel. Iterative nature of work coupled with the overlap of activities can result in unpredictable time to completion and significant rework. Many of the products have missed the time to market window due to unanticipated or rather unplanned iteration and rework. The iterative and often overlapped processes introduce greater amounts of ambiguity in design and development, where the traditional methods and tools of project management provide less value. In this context, identifying critical metrics to understand the iteration probability is an open research area where significant contribution can be made given that iteration has been the key driver of cost and schedule risk in PD projects. Two important questions that the proposed study attempts to address are: Can we predict and identify the number of iterations in a product development flow? Can we provide managerial insights for a better control over iteration? The proposal introduces the concept of decision points and using this concept intends to develop metrics that can provide managerial insights into iteration predictability. By characterizing the product development flow as a network of decision points, the proposed research intends to delve further into iteration probability and attempts to provide more clarity.
Abstract: The mechanical and tribological properties in WC-Co
coatings are strongly affected by hardness and elasticity
specifications. The results revealed the effect of spraying distance on
microhardness and elasticity modulus of coatings. The metallurgical
studies have been made on coated samples using optical microscopy,
scanning electron microscopy (SEM).
Abstract: The aim of the present study is to analyze the generation of osteoporotic vertebral bone induced by lack of calcium during growth period and analyze its effects for disc degeneration, based on biomechanical and histomorphometrical study. Mechanical and histomorphological characteristics of lumbar vertebral bones and discs of rats with calcium free diet (CFD) were detected and tracked by using high resolution in-vivo micro-computed tomography (in-vivo micro-CT), finite element (FE) and histological analysis. Twenty female Sprague-Dawley rats (6 weeks old, approximate weight 170g) were randomly divided into two groups (CFD group: 10, NOR group: 10). The CFD group was maintained on a refmed calcium-controlled semisynthetic diet without added calcium, to induce osteoporosis. All lumbar (L 1-L6) were scanned by using in vivo micro-CT with 35i.un resolution at 0, 4, 8 weeks to track the effects of CFD on the generation of osteoporosis. The fmdings of the present study indicated that calcium insufficiency was the main factor in the generation of osteoporosis and it induced lumbar vertebral disc degeneration. This study is a valuable experiment to firstly evaluate osteoporotic vertebral bone and disc degeneration induced by lack of calcium during growth period from a biomechanical and histomorphometrical point of view.
Abstract: research goal was to determine the expression levels cDNA of brain embrio at gestation days 10 (GD-10). The Electroforesis DNA results showed that GAPDH, Fibronectin1, Ncam1, Tenascin, Vimentin, Neurofilament heavy, Neurofilament medium and Neurofilament low were 447 bp, 462 bp, 293 bp. 416 bp, 327 bp, 301 bp, 398 bp and 289 bp. Result of real-time RT-PCR on brain Embryo at gestation days 10 showed that the expression of copy gen Fibronectin 36 copies, Ncam 21,708 copies; Tenascin 24,505 copies; Vimentin 538,554 copies; Neurofilament heavy 2,419 copies; Neurofilament medium 92,928 copies; Neurofilament low 125,809 copies. Vimentin expressed gene copies is very high compared with other gene copies. This condition are caused by Vimentin, that contribute to proliferate of brain development. The vimentin role to cell proliferation of brain.
Abstract: This paper describes the process used in the
automation of the Maritime UAV commands using the Kinect sensor.
The AR Drone is a Quadrocopter manufactured by Parrot [1] to be
controlled using the Apple operating systems such as iPhones and
Ipads. However, this project uses the Microsoft Kinect SDK and
Microsoft Visual Studio C# (C sharp) software, which are compatible
with Windows Operating System for the automation of the navigation
and control of the AR drone.
The navigation and control software for the Quadrocopter runs on
a windows 7 computer. The project is divided into two sections; the
Quadrocopter control system and the Kinect sensor control system.
The Kinect sensor is connected to the computer using a USB cable
from which commands can be sent to and from the Kinect sensors.
The AR drone has Wi-Fi capabilities from which it can be connected
to the computer to enable transfer of commands to and from the
Quadrocopter.
The project was implemented in C#, a programming language that
is commonly used in the automation systems. The language was
chosen because there are more libraries already established in C# for
both the AR drone and the Kinect sensor.
The study will contribute toward research in automation of
systems using the Quadrocopter and the Kinect sensor for navigation
involving a human operator in the loop. The prototype created has
numerous applications among which include the inspection of vessels
such as ship, airplanes and areas that are not accessible by human
operators.
Abstract: Nanocrystals (NC) alloyed composite CdSxSe1-x(x=0
to 1) have been prepared using the chemical solution deposition
technique. The energy band gap of these alloyed nanocrystals of
approximately the same size, have been determined by scanning
tunneling spectroscopy (STS) technique at room temperature. The
values of the energy band gap obtained directly using STS are
compared to those measured by optical spectroscopy. Increasing the
molar fraction ratio x from 0 to 1 causes clearly observed increase in
the band gap of the alloyed composite nanocrystal. Vegard-s law was
applied to calculate the parameters of the effective mass
approximation (EMA) model and the dimension obtained were
compared to the values measured by STM. The good agreement of
the calculated and measured values is a direct result of applying
Vegard's law in the nanocomposites.
Abstract: Contamination of heavy metals in tin tailings has
caused an interest in the scientific approach of their remediation. One
of the approaches is through phytoremediation, which is using tree
species to extract the heavy metals from the contaminated soils. Tin
tailings comprise of slime and sand tailings. This paper reports only
on the finding of the four timber species namely Acacia mangium,
Hopea odorata, Intsia palembanica and Swietenia macrophylla on
the removal of cadmium (Cd) and lead (Pb) from the slime tailings.
The methods employed for sampling and soil analysis are established
methods. Six trees of each species were randomly selected from a
0.25 ha plot for extraction and determination of their heavy metals.
The soil samples were systematically collected according to 5 x 5 m
grid from each plot. Results showed that the concentration of heavy
metals in soils and trees varied according to species. Higher
concentration of heavy metals was found in the stem than the
primary roots of all the species. A. Mangium accumulated the highest
total amount of Pb per hectare basis.
Abstract: Information is a critical asset and an important source for gaining competitive advantage in firms. The effective maintenance of IT becomes an important task. In order to better understand the determinants of IT effectiveness, this study employs the Industrial Organization (I/O) and Resource Based View (RBV) theories and investigates the industry effect and several major firmspecific factors in relation to their impact on firms- IT effectiveness. The data consist of a panel data of ten-year observations of firms whose IT excellence had been recognized by the CIO Magazine. The non-profit organizations were deliberately excluded, as explained later. The results showed that the effectiveness of IT management varied significantly across industries. Industry also moderated the effects of firm demographic factors such as size and age on IT effectiveness. Surprisingly, R & D investment intensity had negative correlation to IT effectiveness. For managers and practitioners, this study offers some insights for evaluation criteria and expectation for IT project success. Finally, the empirical results indicate that the sustainability of IT effectiveness appears to be short in duration.
Abstract: Nothing that an effective cure for infertility happens
when we can find a unique solution, a great deal of study has been
done in this field and this is a hot research subject for to days study.
So we could analyze the men-s seaman and find out about fertility
and infertility and from this find a true cure for this, since this will be
a non invasive and low risk procedure, it will be greatly welcomed.
In this research, the procedure has been based on few Algorithms
enhancement and segmentation of images which has been done on
the images taken from microscope in different fertility institution and
have obtained a suitable result from the computer images which in
turn help us to distinguish these sperms from fluids and its
surroundings.
Abstract: The research on the effectiveness of environmental
assessment (EA) is a milestone effort to evaluate the state of the field,
including many contributors related with a lot of countries since more
than two decades. In the 1960s, there was a surge of interest between
modern industrialized countries over unexpected opposite effects of
technical invention. The interest led to choice of approaches for
assessing and prediction the impressions of technology and
advancement for social and economic, state health and safety, solidity
and the circumstances. These are consisting of risk assessment,
technology assessment, environmental impact assessment and costbenefit
analysis. In this research contribution, the authors have
described the research status for environmental assessment in
cumulative environmental system. This article discusses the methods
for cumulative effect assessment (CEA).
Abstract: The paper analyzes the large power transformer unit regimes, indicating the criteria for the management of the voltage operating conditions, as well as the change in the operating conditions with the load connected to the secondary winding of the transformer unit. Further, the paper presents the software application for the evaluation of the transformer unit operation under different conditions. The software application was developed by means of virtual instrumentation.
Abstract: In our current political climate of assessment and
accountability initiatives we are failing to prepare our children for a
participatory role in the creative economy. The field of education is
increasingly falling prey to didactic methodologies which train a
nation of competent test takers, foregoing the opportunity to educate
students to find problems and develop multiple solutions. No where is
this more evident than in the area of art education. Due to a myriad of
issues including budgetary shortfalls, time constraints and a general
misconception that anyone who enjoys the arts is capable of teaching
the arts, our students are not developing the skills they require to
become fully literate in critical thinking and creative processing.
Although art integrated curriculum is increasingly being viewed as a
reform strategy for motivating students by offering alternative
presentation of concepts and representation of knowledge acquisition,
misinformed administrators are often excluding the art teacher from
the integration equation. The paper to follow addresses the problem
of the need for divergent thinking and conceptualization in our
schools. Furthermore, this paper explores the role of education, and
specifically, art education in the development of a creatively literate
citizenry.
Abstract: Rapid economic development and population growth
in Malaysia had accelerated the generation of solid waste. This issue
gives pressure for effective management of municipal solid waste
(MSW) to take place in Malaysia due to the increased cost of landfill.
This paper discusses optimal planning of waste-to-energy (WTE)
using a combinatorial simulation and optimization model through
mixed integer linear programming (MILP) approach. The proposed
multi-period model is tested in Iskandar Malaysia (IM) as case study
for a period of 12 years (2011 -2025) to illustrate the economic
potential and tradeoffs involved in this study. In this paper, 3
scenarios have been used to demonstrate the applicability of the
model: (1) Incineration scenario (2) Landfill scenario (3) Optimal
scenario. The model revealed that the minimum cost of electricity
generation from 9,995,855 tonnes of MSW is estimated as USD
387million with a total electricity generation of 50MW /yr in the
optimal scenario.
Abstract: Although so far, many methods for ranking fuzzy numbers
have been discussed broadly, most of them contained some shortcomings,
such as requirement of complicated calculations, inconsistency
with human intuition and indiscrimination. The motivation of
this study is to develop a model for ranking fuzzy numbers based
on the lexicographical ordering which provides decision-makers with
a simple and efficient algorithm to generate an ordering founded on
a precedence. The main emphasis here is put on the ease of use
and reliability. The effectiveness of the proposed method is finally
demonstrated by including a comprehensive comparing different
ranking methods with the present one.
Abstract: The rangelands, as one of the largest dynamic biomes
in the world, have very capabilities. Regulation of greenhouse gases
in the Earth's atmosphere, particularly carbon dioxide as the main
these gases, is one of these cases. The attention to rangeland, as
cheep and reachable resources to sequestrate the carbon dioxide,
increases after the Industrial Revolution. Rangelands comprise the
large parts of Iran as a steppic area. Rudshur (Saveh), as area index of
steppic area, was selected under three sites include long-term
exclosure, medium-term exclosure, and grazable area in order to the
capable of carbon dioxide’s sequestration of dominated species.
Canopy cover’s percentage of two dominated species (Artemisia
sieberi Besser & Stipa barbata Desf) was determined via establishing
of random 1 square meter plot. The sampling of above and below
ground biomass style was obtained by complete random. After
determination of ash percentage in the laboratory; conversion ratio of
plant biomass to organic carbon was calculated by ignition method.
Results of the paired t-test showed that the amount of carbon
sequestration in above ground and underground biomass of Artemisia
sieberi Besser & Stipa barbata Desf is different in three regions. It,
of course, hasn’t any difference between under and surface ground’s
biomass of Artemisia sieberi Besser in long-term exclosure. The
independent t-test results indicate differences between underground
biomass corresponding each other in the studied sites. Carbon
sequestration in the Stipa barbata Desf was totally more than
Artemisia sieberi Besser. Altogether, the average sequestration of the
long-term exclosure was 5.842gr/m², the medium-term exclosure was
4.115gr/m², and grazable area was 5.975gr/m² so that there isn’t
valuable statistical difference in term of total amount of carbon
sequestration to three sites.
Abstract: This paper presents a computer simulation model based on system dynamics methodology for analyzing the dynamic characteristics of input energy structure in agriculture and Bangladesh is used here as a case study for model validation. The model provides an input energy structure linking the major energy flows with human energy and draft energy from cattle as well as tractors and/or power tillers, irrigation, chemical fertilizer and pesticide. The evaluation is made in terms of different energy dependent indicators. During the simulation period, the energy input to agriculture increased from 6.1 to 19.15 GJ/ha i.e. 2.14 fold corresponding to energy output in terms of food, fodder and fuel increase from 71.55 to 163.58 GJ/ha i.e. 1.28 fold from the base year. This result indicates that the energy input in Bangladeshi agricultural production is increasing faster than the energy output. Problems such as global warming, nutrient loading and pesticide pollution can associate with this increasing input. For an assessment, a comparative statement of input energy use in agriculture of developed countries (DCs) and least developed countries (LDCs) including Bangladesh has been made. The performance of the model is found satisfactory to analyze the agricultural energy system for LDCs