Abstract: Recently, a model multi-agent e-commerce system based on mobile buyer agents and transfer of strategy modules was proposed. In this paper a different approach to code mobility is introduced, where agent mobility is replaced by local agent creation supplemented by similar code mobility as in the original proposal. UML diagrams of agents involved in the new approach to mobility and the augmented system activity diagram are presented and discussed.
Abstract: This was the first document revealing the
investigation of protein hydrolysate production optimization from J.
curcas cake. Proximate analysis of raw material showed 18.98%
protein, 5.31% ash, 8.52% moisture and 12.18% lipid. The
appropriate protein hydrolysate production process began with
grinding the J. curcas cake into small pieces. Then it was suspended
in 2.5% sodium hydroxide solution with ratio between solution/ J.
curcas cake at 80:1 (v/w). The hydrolysis reaction was controlled at
temperature 50 °C in water bath for 45 minutes. After that, the
supernatant (protein hydrolysate) was separated using centrifuge at
8000g for 30 minutes. The maximum yield of resulting protein
hydrolysate was 73.27 % with 7.34% moisture, 71.69% total protein,
7.12% lipid, 2.49% ash. The product was also capable of well
dissolving in water.
Abstract: The presence of toxic heavy metals in industrial
effluents is one of the serious threats to the environment. Heavy
metals such as Cadmium, Chromium, Lead, Nickel, Zinc, Mercury,
Copper, Arsenic are found in the effluents of industries such as
foundries, electroplating, petrochemical, battery manufacturing,
tanneries, fertilizer, dying, textiles, metallurgical and metal finishing.
Tremendous increase of industrial copper usage and its presence in
industrial effluents has lead to a growing concern about the fate and
effects of Copper in the environment. Percolation of industrial
effluents through soils leads to contamination of ground water and
soils. The transport of heavy metals and their diffusion into the soils
has therefore, drawn the attention of the researchers.
In this study, an attempt has been made to delineate the
mechanisms of transport and fate of copper in terrestrial
environment. Column studies were conducted using perplex glass
square column of dimension side 15 cm and 1.35 m long. The soil
samples were collected from a natural drain near Mohali (India). The
soil was characterized to be poorly graded sandy loam. The soil was
compacted to the field dry density level of about 1.6 g/cm3. Break
through curves for different depths of the column were plotted. The
results of the column study indicated that the copper has high
tendency to flow in the soils and fewer tendencies to get absorbed on
the soil particles. The t1/2 estimates obtained from the studies can be
used for design copper laden wastewater disposal systems.
Abstract: Residue Number System (RNS) is a modular representation and is proved to be an instrumental tool in many digital signal processing (DSP) applications which require high-speed computations. RNS is an integer and non weighted number system; it can support parallel, carry-free, high-speed and low power arithmetic. A very interesting correspondence exists between the concepts of Multiple Valued Logic (MVL) and Residue Number Arithmetic. If the number of levels used to represent MVL signals is chosen to be consistent with the moduli which create the finite rings in the RNS, MVL becomes a very natural representation for the RNS. There are two concerns related to the application of this Number System: reaching the most possible speed and the largest dynamic range. There is a conflict when one wants to resolve both these problem. That is augmenting the dynamic range results in reducing the speed in the same time. For achieving the most performance a method is considere named “One-Hot Residue Number System" in this implementation the propagation is only equal to one transistor delay. The problem with this method is the huge increase in the number of transistors they are increased in order m2 . In real application this is practically impossible. In this paper combining the Multiple Valued Logic and One-Hot Residue Number System we represent a new method to resolve both of these two problems. In this paper we represent a novel design of an OHRNS-based adder circuit. This circuit is useable for Multiple Valued Logic moduli, in comparison to other RNS design; this circuit has considerably improved the number of transistors and power consumption.
Abstract: A novel circuit for generating a signal embedded with
features about data from three sensors is presented. This suggested
circuit is making use of a resistance-to-time converter employing a
bridge amplifier, an integrator and a comparator. The second resistive
sensor (Rz) is transformed into duty cycle. Another bridge with
varying resistor, (Ry) in the feedback of an OP AMP is added in
series to change the amplitude of the resulting signal in a proportional
relationship while keeping the same frequency and duty cycle
representing proportional changes in resistors Rx and Rz already
mentioned. The resultant output signal carries three types of
information embedded as variations of its frequency, duty cycle and
amplitude.
Abstract: This paper presents a NDT by infrared thermography with excitation CO2 Laser, wavelength of 10.6 μm. This excitation is the controllable heating beam, confirmed by a preliminary test on a wooden plate 1.2 m x 0.9 m x 1 cm. As the first practice, this method is applied to detecting the defect in CFRP heated by the Laser 300 W during 40 s. Two samples 40 cm x 40 cm x 4.5 cm are prepared, one with defect, another one without defect. The laser beam passes through the lens of a deviation device, and heats the samples placed at a determinate position and area. As a result, the absence of adhesive can be detected. This method displays prominently its application as NDT with the composite materials. This work gives a good perspective to characterize the laser beam, which is very useful for the next detection campaigns.
Abstract: Magnetic Resonance Imaging play a vital role in the decision-diagnosis process of brain MR images. For an accurate diagnosis of brain related problems, the experts mostly compares both T1 and T2 weighted images as the information presented in these two images are complementary. In this paper, rotational and translational invariant form of Local binary Pattern (LBP) with additional gray scale information is used to retrieve similar slices of T1 weighted images from T2 weighted images or vice versa. The incorporation of additional gray scale information on LBP can extract more local texture information. The accuracy of retrieval can be improved by extracting moment features of LBP and reweighting the features based on users feedback. Here retrieval is done in a single subject scenario where similar images of a particular subject at a particular level are retrieved, and multiple subjects scenario where relevant images at a particular level across the subjects are retrieved.
Abstract: The effects of divers carbon substrates were
investigated for the tabtoxin production of an isolated pathogenic
Pseudomonas syringae pv. tabaci, the causal agent of wildfire of
tobacco and are discussed in relation to the bacterium growth. The
isolated organism was grown in batch culture on Woolley's
medium (28°C, 200 rpm, during 5 days). The growth has been
measured by the optical density (OD) at 620 nm and the tabtoxin
production quantified by Escherichia coli (K-12) bioassay
technique. The growth and the tabtoxin production were both
influenced by the substrates (sugars, amino acids, organic acids)
used, each, as a sole carbon source and as a supplement for the
same amino acids. The most significant quantities of tabtoxin were
obtained in presence of some amino acids used as sole carbon
source and/or as supplement.
Abstract: This paper will discuss about an active power generator scheduling method in order to increase the limit level of steady state systems. Some power generator optimization methods such as Langrange, PLN (Indonesian electricity company) Operation, and the proposed Z-Thevenin-based method will be studied and compared in respect of their steady state aspects. A method proposed in this paper is built upon the thevenin equivalent impedance values between each load respected to each generator. The steady state stability index obtained with the REI DIMO method. This research will review the 500kV-Jawa-Bali interconnection system. The simulation results show that the proposed method has the highest limit level of steady state stability compared to other optimization techniques such as Lagrange, and PLN operation. Thus, the proposed method can be used to create the steady state stability limit of the system especially in the peak load condition.
Abstract: Cloud Computing is a new technology that helps us to
use the Cloud for compliance our computation needs. Cloud refers to a scalable network of computers that work together like Internet. An
important element in Cloud Computing is that we shift processing, managing, storing and implementing our data from, locality into the
Cloud; So it helps us to improve the efficiency. Because of it is new
technology, it has both advantages and disadvantages that are
scrutinized in this article. Then some vanguards of this technology
are studied. Afterwards we find out that Cloud Computing will have
important roles in our tomorrow life!
Abstract: The feature extraction method(s) used to recognize
hand-printed characters play an important role in ICR applications.
In order to achieve high recognition rate for a recognition system, the
choice of a feature that suits for the given script is certainly an
important task. Even if a new feature required to be designed for a
given script, it is essential to know the recognition ability of the
existing features for that script. Devanagari script is being used in
various Indian languages besides Hindi the mother tongue of majority
of Indians. This research examines a variety of feature extraction
approaches, which have been used in various ICR/OCR applications,
in context to Devanagari hand-printed script. The study is conducted
theoretically and experimentally on more that 10 feature extraction
methods. The various feature extraction methods have been evaluated
on Devanagari hand-printed database comprising more than 25000
characters belonging to 43 alphabets. The recognition ability of the
features have been evaluated using three classifiers i.e. k-NN, MLP
and SVM.
Abstract: The removal of hydrogen sulphide is required for reasons of health, odour problems, safety and corrosivity problems. The means of removing hydrogen sulphide mainly depend on its concentration and kind of medium to be purified. The paper deals with a method of hydrogen sulphide removal from the air by its catalytic oxidation to elemental sulphur with the use of Fe-EDTA complex. The possibility of obtaining fibrous filtering materials able to remove small concentrations of H2S from the air were described. The base of these materials is fibrous ion exchanger with Fe(III)- EDTA complex immobilized on their functional groups. The complex of trivalent iron converts hydrogen sulphide to elemental sulphur. Bivalent iron formed in the reaction is oxidized by the atmospheric oxygen, so complex of trivalent iron is continuously regenerated and the overall process can be accounted as pseudocatalytic. In the present paper properties of several fibrous catalysts based on ion exchangers with different chemical nature (weak acid,weak base and strong base) were described. It was shown that the main parameters affecting the process of catalytic oxidation are:concentration of hydrogen sulphide in the air, relative humidity of the purified air, the process time and the content of Fe-EDTA complex in the fibres. The data presented show that the filtering layers with anion exchange package are much more active in the catalytic processes of hydrogen sulphide removal than cation exchanger and inert materials. In the addition to the nature of the fibres relative air humidity is a critical factor determining efficiency of the material in the air purification from H2S. It was proved that the most promising carrier of the Fe-EDTA catalyst for hydrogen sulphide oxidation are Fiban A-6 and Fiban AK-22 fibres.
Abstract: During the last couple of years, the degree of dependence on IT systems has reached a dimension nobody imagined to be possible 10 years ago. The increased usage of mobile devices (e.g., smart phones), wireless sensor networks and embedded devices (Internet of Things) are only some examples of the dependency of modern societies on cyber space. At the same time, the complexity of IT applications, e.g., because of the increasing use of cloud computing, is rising continuously. Along with this, the threats to IT security have increased both quantitatively and qualitatively, as recent examples like STUXNET or the supposed cyber attack on Illinois water system are proofing impressively. Once isolated control systems are nowadays often publicly available - a fact that has never been intended by the developers. Threats to IT systems don’t care about areas of responsibility. Especially with regard to Cyber Warfare, IT threats are no longer limited to company or industry boundaries, administrative jurisdictions or state boundaries. One of the important countermeasures is increased cooperation among the participants especially in the field of Cyber Defence. Besides political and legal challenges, there are technical ones as well. A better, at least partially automated exchange of information is essential to (i) enable sophisticated situational awareness and to (ii) counter the attacker in a coordinated way. Therefore, this publication performs an evaluation of state of the art Intrusion Detection Message Exchange protocols in order to guarantee a secure information exchange between different entities.
Abstract: As the majority of faults are found in a few of its
modules so there is a need to investigate the modules that are
affected severely as compared to other modules and proper
maintenance need to be done in time especially for the critical
applications. As, Neural networks, which have been already applied
in software engineering applications to build reliability growth
models predict the gross change or reusability metrics. Neural
networks are non-linear sophisticated modeling techniques that are
able to model complex functions. Neural network techniques are
used when exact nature of input and outputs is not known. A key
feature is that they learn the relationship between input and output
through training. In this present work, various Neural Network Based
techniques are explored and comparative analysis is performed for
the prediction of level of need of maintenance by predicting level
severity of faults present in NASA-s public domain defect dataset.
The comparison of different algorithms is made on the basis of Mean
Absolute Error, Root Mean Square Error and Accuracy Values. It is
concluded that Generalized Regression Networks is the best
algorithm for classification of the software components into different
level of severity of impact of the faults. The algorithm can be used to
develop model that can be used for identifying modules that are
heavily affected by the faults.
Abstract: Inter-organizational Workflow (IOW) is commonly
used to support the collaboration between heterogeneous and
distributed business processes of different autonomous organizations
in order to achieve a common goal. E-government is considered as an
application field of IOW. The coordination of the different
organizations is the fundamental problem in IOW and remains the
major cause of failure in e-government projects. In this paper, we
introduce a new coordination model for IOW that improves the
collaboration between government administrations and that respects
IOW requirements applied to e-government. For this purpose, we
adopt a Multi-Agent approach, which deals more easily with interorganizational
digital government characteristics: distribution,
heterogeneity and autonomy. Our model integrates also different
technologies to deal with the semantic and technologic
interoperability. Moreover, it conserves the existing systems of
government administrations by offering a distributed coordination
based on interfaces communication. This is especially applied in
developing countries, where administrations are not necessary
equipped with workflow systems. The use of our coordination
techniques allows an easier migration for an e-government solution
and with a lower cost. To illustrate the applicability of the proposed
model, we present a case study of an identity card creation in Tunisia.
Abstract: Due to the high percentage of induction motors in industrial market, there exist a large opportunity for energy savings. Replacement of working induction motors with more efficient ones can be an important resource for energy savings. A calculation of energy savings and payback periods, as a result of such a replacement, based on nameplate motor efficiency or manufacture-s data can lead to large errors [1]. Efficiency of induction motors (IMs) can be extracted using some procedures that use the no-load test results. In the cases that we must estimate the efficiency on-line, some of these procedures can-t be efficient. In some cases the efficiency estimates using the rating values of the motor, but these procedures can have errors due to the different working condition of the motor. In this paper the efficiency of an IM estimated by using the genetic algorithm. The results are compared with the measured values of the torque and power. The results show smaller errors for this procedure compared with the conventional classical procedures, hence the cost of the equipments is reduced and on-line estimation of the efficiency can be made.
Abstract: The use of radar in Quantitative Precipitation Estimation (QPE) for radar-rainfall measurement is significantly beneficial. Radar has advantages in terms of high spatial and temporal condition in rainfall measurement and also forecasting. In Malaysia, radar application in QPE is still new and needs to be explored. This paper focuses on the Z/R derivation works of radarrainfall estimation based on rainfall classification. The works developed new Z/R relationships for Klang River Basin in Selangor area for three different general classes of rain events, namely low (10mm/hr, 30mm/hr) and also on more specific rain types during monsoon seasons. Looking at the high potential of Doppler radar in QPE, the newly formulated Z/R equations will be useful in improving the measurement of rainfall for any hydrological application, especially for flood forecasting.
Abstract: Increasing energy absorption is a significant parameter
in vehicle design. Absorbing more energy results in decreasing
occupant damage. Limitation of the deflection in a side impact results
in decreased energy absorption (SEA) and increased peak load (PL).
Hence a high crash force jeopardizes passenger safety and vehicle
integrity. The aims of this paper are to determine suitable dimensions
and material of a square beam subjected to side impact, in order to
maximize SEA and minimize PL. To achieve this novel goal, the
geometric parameters of a square beam are optimized using the
response surface method (RSM).multi-objective optimization is
performed, and the optimum design for different response features is
obtained.
Abstract: One of the long standing challenging aspect in mobile robotics is the ability to navigate autonomously, avoiding modeled and unmodeled obstacles especially in crowded and unpredictably changing environment. A successful way of structuring the navigation task in order to deal with the problem is within behavior based navigation approaches. In this study, Issues of individual behavior design and action coordination of the behaviors will be addressed using fuzzy logic. A layered approach is employed in this work in which a supervision layer based on the context makes a decision as to which behavior(s) to process (activate) rather than processing all behavior(s) and then blending the appropriate ones, as a result time and computational resources are saved.
Abstract: The recent global financial problem urges government
to play role in stimulating the economy due to the fact that private
sector has little ability to purchase during the recession. A concerned
question is whether the increased government spending crowds out
private consumption and whether it helps stimulate the economy. If
the government spending policy is effective; the private consumption
is expected to increase and can compensate the recent extra
government expense. In this study, the government spending is
categorized into government consumption spending and government
capital spending. The study firstly examines consumer consumption
along the line with the demand function in microeconomic theory.
Three categories of private consumption are used in the study. Those
are food consumption, non food consumption, and services
consumption. The dynamic Almost Ideal Demand System of the three
categories of the private consumption is estimated using the Vector
Error Correction Mechanism model. The estimated model indicates
the substituting effects (negative impacts) of the government
consumption spending on budget shares of private non food
consumption and of the government capital spending on budget share
of private food consumption, respectively. Nevertheless the result
does not necessarily indicate whether the negative effects of changes
in the budget shares of the non food and the food consumption means
fallen total private consumption. Microeconomic consumer demand
analysis clearly indicates changes in component structure of
aggregate expenditure in the economy as a result of the government
spending policy. The macroeconomic concept of aggregate demand
comprising consumption, investment, government spending (the
government consumption spending and the government capital
spending), export, and import are used to estimate for their
relationship using the Vector Error Correction Mechanism model.
The macroeconomic study found no effect of the government capital
spending on either the private consumption or the growth of GDP
while the government consumption spending has negative effect on
the growth of GDP. Therefore no crowding out effect of the
government spending is found on the private consumption but it is
ineffective and even inefficient expenditure as found reducing growth
of the GDP in the context of Thailand.