Abstract: Neighborhood Rough Sets (NRS) has been proven to
be an efficient tool for heterogeneous attribute reduction. However,
most of researches are focused on dealing with complete and noiseless
data. Factually, most of the information systems are noisy, namely,
filled with incomplete data and inconsistent data. In this paper, we
introduce a generalized neighborhood rough sets model, called
VPTNRS, to deal with the problem of heterogeneous attribute
reduction in noisy system. We generalize classical NRS model with
tolerance neighborhood relation and the probabilistic theory.
Furthermore, we use the neighborhood dependency to evaluate the
significance of a subset of heterogeneous attributes and construct a
forward greedy algorithm for attribute reduction based on it.
Experimental results show that the model is efficient to deal with noisy
data.
Abstract: This study investigates the electrical performance of a
planar solid oxide fuel cell unit with cross-flow configuration when the fuel utilization gets higher and the fuel inlet flow are non-uniform.
A software package in this study solves two-dimensional,
simultaneous, partial differential equations of mass, energy, and
electro-chemistry, without considering stack direction variation. The
results show that the fuel utilization increases with a decrease in the molar flow rate, and the average current density decreases when the
molar flow rate drops. In addition, non-uniform Pattern A will induce more severe happening of non-reaction area in the corner of the fuel
exit and the air inlet. This non-reaction area deteriorates the average
current density and then deteriorates the electrical performance to –7%.
Abstract: Information technology managers nowadays are
facing with tremendous pressure to plan, implement, and adopt new
technology solution due to the rapidity of technology changes.
Resulted from a lack of study that have been done in this topic, the
aim of this paper is to provide a comparison review on current tools
that are currently being used in order to respond to technological
changes. The study is based on extensive literature review of
published works with majority of them are ranging from 2000 to the
first part of 2011. The works were gathered from journals, books,
and other information sources available on the Web. Findings show
that, each tools has different focus and none of the tools are
providing a framework in holistic view, which should include
technical, people, process, and business environment aspect. Hence,
this result provides potential information about current available
tools that IT managers could use to manage changes in technology.
Further, the result reveals a research gap in the area where the
industries a short of such framework.
Abstract: Free convection effects and heat transfer due to a pulsating point heat source embedded in an infinite, fluid saturated, porous dusty medium are studied analytically. Both velocity and temperature fields are discussed in the form of series expansions in the Rayleigh number, for both the fluid and particle phases based on the mean heat generation rate from source and on the permeability of the porous dusty medium. This study is carried out by assuming the Rayleigh number small and the validity of Darcy-s law. Analytical expressions for both phases are obtained for second order mean in both velocity and temperature fields and evolution of different wave patterns are observed in the fluctuating part. It has been observed that, at the vicinity of the origin, the second order mean flow is influenced only by relaxation time of dust particles and not by dust concentration.
Abstract: This paper aims to develop a NOx emission model of
an acid gas incinerator using Nelder-Mead least squares support
vector regression (LS-SVR). Malaysia DOE is actively imposing the
Clean Air Regulation to mandate the installation of analytical
instrumentation known as Continuous Emission Monitoring System
(CEMS) to report emission level online to DOE . As a hardware
based analyzer, CEMS is expensive, maintenance intensive and often
unreliable. Therefore, software predictive technique is often
preferred and considered as a feasible alternative to replace the
CEMS for regulatory compliance. The LS-SVR model is built based
on the emissions from an acid gas incinerator that operates in a LNG
Complex. Simulated Annealing (SA) is first used to determine the
initial hyperparameters which are then further optimized based on the
performance of the model using Nelder-Mead simplex algorithm.
The LS-SVR model is shown to outperform a benchmark model
based on backpropagation neural networks (BPNN) in both training
and testing data.
Abstract: A challenging problem in radar signal processing is to
achieve reliable target detection in the presence of interferences. In
this paper, we propose a novel algorithm for automatic censoring of
radar interfering targets in log-normal clutter. The proposed
algorithm, termed the forward automatic censored cell averaging
detector (F-ACCAD), consists of two steps: removing the corrupted
reference cells (censoring) and the actual detection. Both steps are
performed dynamically by using a suitable set of ranked cells to
estimate the unknown background level and set the adaptive
thresholds accordingly. The F-ACCAD algorithm does not require
any prior information about the clutter parameters nor does it require
the number of interfering targets. The effectiveness of the F-ACCAD
algorithm is assessed by computing, using Monte Carlo simulations,
the probability of censoring and the probability of detection in
different background environments.
Abstract: Lighting upgrades involve relatively lower costs which
allow the benefits to be spread more widely than is possible with any
other energy efficiency measure. In order to popularize the adoption of
CFL in Taiwan, the authority proposes to implement a new energy efficient lamp comparative label system. The current study was
accordingly undertaken to investigate the factors affecting the performance and the deviation of actual and labeled performance of
commercially available integrated CFLs. In this paper, standard test
methods to determine the electrical and photometric performances of
CFL were developed based on CIE 84-1989 and CIE 60901-1987,
then 55 selected CFLs from market were tested. The results show that
with higher color temperature of CFLs lower efficacy are achieved. It
was noticed that the most packaging of CFL often lack the information of Color Rendering Index. Also, there was no correlation between
price and performance of the CFLs was indicated in this work. The results of this paper might help consumers to make more informed
CFL-purchasing decisions.
Abstract: The purpose of this study is to analyze the islands
tourist travel information sources, as well as for the satisfaction of the
tourist destination services. This study used questionnaires to the
island of Taiwan to the Penghu Islands to engage in tourism activities
tourist adopt the designated convenience sampling method, a total of
889 valid questionnaires were collected. After statistical analysis, this
study found that: 1. tourists to the Penghu Islands travel information
source for “friends and family came to Penghu". 2. Tourists feel the
service of the outlying islands of Penghu, the highest feelings of
“friendly local residents". 3. There are different demographic variables
affect the tourist travel information source and service satisfaction.
Based on the findings of this study not only for Penghu's tourism
industry with the unit in charge of the proposed operating and
suggestions for future research to other researchers.
Abstract: With the fast evolution of digital data exchange, security information becomes much important in data storage and transmission. Due to the increasing use of images in industrial process, it is essential to protect the confidential image data from unauthorized access. In this paper, we analyze the Advanced Encryption Standard (AES), and we add a key stream generator (A5/1, W7) to AES to ensure improving the encryption performance; mainly for images characterised by reduced entropy. The implementation of both techniques has been realized for experimental purposes. Detailed results in terms of security analysis and implementation are given. Comparative study with traditional encryption algorithms is shown the superiority of the modified algorithm.
Abstract: We board the problem of creating a seismic alert
system, based upon artificial neural networks, trained by using the
well-known back-propagation and genetic algorithms, in order to emit
the alarm for the population located into a specific city, about an
eminent earthquake greater than 4.5 Richter degrees, and avoiding
disasters and human loses. In lieu of using the propagation wave, we
employed the magnitude of the earthquake, to establish a correlation
between the recorded magnitudes from a controlled area and the city,
where we want to emit the alarm. To measure the accuracy of the
posed method, we use a database provided by CIRES, which contains
the records of 2500 quakes incoming from the State of Guerrero
and Mexico City. Particularly, we performed the proposed method to
generate an issue warning in Mexico City, employing the magnitudes
recorded in the State of Guerrero.
Abstract: Acute kidney injury (AKI) is a new worldwide public
health problem. A diagnosis of this disease using creatinine is still a
problem in clinical practice. Therefore, a measurement of biomarkers
responsible for AKI has received much attention in the past couple
years. Cytokine interleukin-18 (IL-18) was reported as one of the
early biomarkers for AKI. The most commonly used method to
detect this biomarker is an immunoassay. This study used a planar
platform to perform an immunoassay using fluorescence for
detection. In this study, anti-IL-18 antibody was immobilized onto a
microscope slide using a covalent binding method. Make-up samples
were diluted at the concentration between 10 to 1000 pg/ml to create
a calibration curve. The precision of the system was determined
using a coefficient of variability (CV), which was found to be less
than 10%. The performance of this immunoassay system was
compared with the measurement from ELISA.
Abstract: Vacuum membrane distillation (VMD) process can be
used for water purification or the desalination of salt water. The
process simply consists of a flat sheet hydrophobic micro porous
PTFE membrane and diaphragm vacuum pump without a condenser
for the water recovery or trap. The feed was used aqueous NaCl
solution. The VMD experiments were performed to evaluate the heat
and mass transfer coefficient of the boundary layer in a membrane
module. The only operating parameters are feed inlet temperature,
and feed flow rate were investigated. The permeate flux was strongly
affected by the feed inlet temperature, feed flow rate, and boundary
layer heat transfer coefficient. Since lowering the temperature
polarization coefficient is essential enhance the process performance
considerable and maximizing the heat transfer coefficient for
maximizes the mass flux of distillate water. In this paper, the results
of VMD experiments are used to measure the boundary layer heat
transfer coefficient, and the experimental results are used to reevaluate
the empirical constants in the Dittus- Boelter equation.
Abstract: The demand of the energy management systems (EMS) set forth by modern power systems requires fast energy management systems. Contingency analysis is among the functions in EMS which is time consuming. In order to handle this limitation, this paper introduces agent based technology in the contingency analysis. The main function of agents is to speed up the performance. Negotiations process in decision making is explained and the issue set forth is the minimization of the operating costs. The IEEE 14 bus system and its line outage have been used in the research and simulation results are presented.
Abstract: In Grid computing, a data transfer protocol called
GridFTP has been widely used for efficiently transferring a large volume
of data. Currently, two versions of GridFTP protocols, GridFTP
version 1 (GridFTP v1) and GridFTP version 2 (GridFTP v2), have
been proposed in the GGF. GridFTP v2 supports several advanced
features such as data streaming, dynamic resource allocation, and
checksum transfer, by defining a transfer mode called X-block mode.
However, in the literature, effectiveness of GridFTP v2 has not been
fully investigated. In this paper, we therefore quantitatively evaluate
performance of GridFTP v1 and GridFTP v2 using mathematical
analysis and simulation experiments. We reveal the performance
limitation of GridFTP v1, and quantitatively show effectiveness of
GridFTP v2. Through several numerical examples, we show that by
utilizing the data streaming feature, the average file transfer time of
GridFTP v2 is significantly smaller than that of GridFTP v1.
Abstract: The paper outlines the relevance of computational
geometry within the design and production process of architecture.
Based on two case studies, the digital chain - from the initial formfinding
to the final realization of spatial concepts - is discussed in
relation to geometric principles. The association with the fascinating
complexity that can be found in nature and its underlying geometry
was the starting point for both projects presented in the paper. The
translation of abstract geometric principles into a three-dimensional
digital design model – realized in Rhinoceros – was followed by a
process of transformation and optimization of the initial shape that
integrated aesthetic, spatial and structural qualities as well as aspects
of material properties and conditions of production.
Abstract: In this paper, we present the design and experimental
evaluation of complementary energy path adiabatic logic (CEPAL)
based 1 bit full adder circuit. A simulative investigation on the
proposed full adder has been done using VIRTUOSO SPECTRE
simulator of cadence in 0.18μm UMC technology and its
performance has been compared with the conventional CMOS full
adder circuit. The CEPAL based full adder circuit exhibits the energy
saving of 70% to the conventional CMOS full adder circuit, at 100
MHz frequency and 1.8V operating voltage.
Abstract: In this paper a technique for increasing the
convergence rate of fractionally spaced channel equalizer is
proposed. Instead of symbol-spaced updating of the equalizer filter, a
mechanism has been devised to update the filter at a higher rate. This
ensures convergence of the equalizer filter at a higher rate and
therefore less time-consuming. The proposed technique has been
simulated and tested for two-ray modeled channels with various
delay spreads. These channels include minimum-phase and nonminimum-
phase channels. Simulation results suggest that that
proposed technique outperforms the conventional technique of
symbol-spaced updating of equalizer filter.
Abstract: The zinc and iron environments in different growth
stages have been studied with EXAFS and XANES with Brookhaven
Synchrotron Light Source. Tissue samples included meat, organ,
vegetable, leaf, and yeast. The project studied the EXAFS and
XANES of tissue samples using Zn and Fe K-edges. Duck embryo
samples show that brain and intestine would contain shorter EXFAS
determined Zn-N/O bond; as with the cases of fresh yeast versus
reconstituted live yeast and green leaf versus yellow leaf. The
XANES Fourier transform characteristic-length would be useful as a
functionality index for selected types of tissue samples in various
physical states. The extension to the development of functional
synchrotron imaging for tissue engineering application based on
spectroscopic technique is discussed.
Abstract: As an adult man and woman love each other and come to have faith in each other as their spouse, they marry each other. Recently people-s economic life has become individualized and women are enjoying a high education level and increased participation in social activities, and these changes are creating environment favorable for single life. Thus, an increasing number of people are choosing celibacy, and many people prefer cohabitation to marriage. Nevertheless, marriage is still regarded as a must-to-do in our thought. Most of people throughout the world admit marriage as one of natural processes of life, and is an important passage rite in life that all people experience as we can see everywhere in the world despite the diversity of lifestyles. With regard to wedding ceremony, however, each country and culture has its own unique tradition and style of festival. It is not just a congratulatory ceremony but contains multiple concepts representing the age, country or culture. Moreover, the form and contents of wedding ceremony changes over time, and such features of wedding ceremony are well represented in films. This study took note of the fact that films reflect and reproduce each country-s historicity, culturality and analyzed four films, which are believed to show differences between Eastern and Western wedding ceremonies. The selected films are: A Perfect Match (2002), Marriage Is a Crazy Thing (2001), Bride Wars (2009) and 27 Dresses (2008). The author attempted to examine wedding ceremonies described in the four films, differences between the East and the West suggested by the films, and changes in their societies.
Abstract: For most image fusion algorithms separate
relationship by pixels in the image and treat them more or less
independently. In addition, they have to be adjusted different
parameters in different time or weather. In this paper, we propose a
region–based image fusion which combines aspects of feature and
pixel-level fusion method to replace only by pixel. The basic idea is
to segment far infrared image only and to add information of each
region from segmented image to visual image respectively. Then we
determine different fused parameters according different region. At
last, we adopt artificial neural network to deal with the problems of
different time or weather, because the relationship between fused
parameters and image features are nonlinear. It render the fused
parameters can be produce automatically according different states.
The experimental results present the method we proposed indeed
have good adaptive capacity with automatic determined fused
parameters. And the architecture can be used for lots of applications.