Abstract: This paper tries to shed light on the existence of a bank lending channel (BLC) in South Eastern European countries (SEE). Based on a VAR framework we test the responsiveness of credit supply to monetary policy shocks. By compiling a new data set and using the reserve requirement ratio, among others, as the policy instrument we measure the effectiveness of the BLC and the buffering effect of the banks in the SEE countries. The results indicate that loan supply is significantly affected by shifts in monetary policy, when demand factors are controlled. Furthermore, by analyzing the effect of the Greek banks in the region we conclude that Greek banks do buffer the negative effects of monetary policy transmission. By having a significant market share of the SEE-s banking markets we argue that Greek banks influence positively the economic growth of SEE countries.
Abstract: This paper presents a new classification algorithm using colour and texture for obstacle detection. Colour information is computationally cheap to learn and process. However in many cases, colour alone does not provide enough information for classification. Texture information can improve classification performance but usually comes at an expensive cost. Our algorithm uses both colour and texture features but texture is only needed when colour is unreliable. During the training stage, texture features are learned specifically to improve the performance of a colour classifier. The algorithm learns a set of simple texture features and only the most effective features are used in the classification stage. Therefore our algorithm has a very good classification rate while is still fast enough to run on a limited computer platform. The proposed algorithm was tested with a challenging outdoor image set. Test result shows the algorithm achieves a much better trade-off between classification performance and efficiency than a typical colour classifier.
Abstract: Mobile Ad hoc network consists of a set of mobile
nodes. It is a dynamic network which does not have fixed topology.
This network does not have any infrastructure or central
administration, hence it is called infrastructure-less network. The
change in topology makes the route from source to destination as
dynamic fixed and changes with respect to time. The nature of
network requires the algorithm to perform route discovery, maintain
route and detect failure along the path between two nodes [1]. This
paper presents the enhancements of ARA [2] to improve the
performance of routing algorithm. ARA [2] finds route between
nodes in mobile ad-hoc network. The algorithm is on-demand source
initiated routing algorithm. This is based on the principles of swarm
intelligence. The algorithm is adaptive, scalable and favors load
balancing. The improvements suggested in this paper are handling of
loss ants and resource reservation.
Abstract: The objective of current issue was to develop a model
of testicular herpes simplex virus (HSV) type I infection for
assessment of viral effect on fertility. 56 male mice were inoculated
intraperitoneally with different concentrations of HSV on 8 day post
partum. It was revealed that the optimal dose was 100 plaque
forming units per mice as it provided testicular infection in 100% of
survivors. HSV proteins were detected both in somatic and germ
cells (spermatogonia, spermatocytes, spermatides). Although DNA
load in testis was descending from 3 to 28 days post infection only
12.5% of infected males had offspring after mating with uninfected
females comparing to 87.5% in control (p=0.012). These results are
the first direct evidence for HSV impact in male sterility. Prepuberal
mice appeared to be a suitable model for investigation of
pathogenesis of virus-associated fertility disorders.
Abstract: This paper mathematically analyses the varying
magnitude of production loss, which may occur due to idle time (inprocess
waiting time and traveling time) on a linear walking worker
assembly line. Within this flexible and reconfigurable assembly
system, each worker travels down the line carrying out each
assembly task at each station; and each worker accomplishes the
assembly of a unit from start to finish and then travels back to the
first station to start the assembly of a new product. This strategy of
system design attempts to combine the flexibility of the U-shaped
moving worker assembly cell with the efficiency of the conventional
fixed worker assembly line. The paper aims to evaluate the effect of
idle time that may offset the labor efficiency of each walking worker
providing an insight into the mechanism of such a flexible and
reconfigurable assembly system.
Abstract: In this paper, backup and recovery technique for Peer
to Peer applications, such as a distributed asynchronous Web-Based
Training system that we have previously proposed. In order to
improve the scalability and robustness of this system, all contents and
function are realized on mobile agents. These agents are distributed
to computers, and they can obtain using a Peer to Peer network
that modified Content-Addressable Network. In the proposed system,
although entire services do not become impossible even if some
computers break down, the problem that contents disappear occurs
with an agent-s disappearance. As a solution for this issue, backups
of agents are distributed to computers. If a failure of a computer is
detected, other computers will continue service using backups of the
agents belonged to the computer.
Abstract: Aerial and satellite images are information rich. They are also complex to analyze. For GIS systems, many features require fast and reliable extraction of roads and intersections. In this paper, we study efficient and reliable automatic extraction algorithms to address some difficult issues that are commonly seen in high resolution aerial and satellite images, nonetheless not well addressed in existing solutions, such as blurring, broken or missing road boundaries, lack of road profiles, heavy shadows, and interfering surrounding objects. The new scheme is based on a new method, namely reference circle, to properly identify the pixels that belong to the same road and use this information to recover the whole road network. This feature is invariable to the shape and direction of roads and tolerates heavy noise and disturbances. Road extraction based on reference circles is much more noise tolerant and flexible than the previous edge-detection based algorithms. The scheme is able to extract roads reliably from images with complex contents and heavy obstructions, such as the high resolution aerial/satellite images available from Google maps.
Abstract: With the development of the Polyvinyl chloride
(PVC) products in many applications, the challenge of investigating
the raw material composition and reducing the cost have both
become more and more important. Considerable research has been
done investigating the effect of additives on the PVC products. Most
of the PVC composites research investigates only the effect of
single/few factors, at a time. This isolated consideration of the input
factors does not take in consideration the interaction effect of the
different factors. This paper implements a mixture experimental
design approach to find out a cost-effective PVC composition for the
production of electrical-insulation cables considering the ASTM
Designation (D) 6096. The results analysis showed that a minimum
cost can be achieved through using 20% virgin PVC, 18.75%
recycled PVC, 43.75% CaCO3 with participle size 10 microns, 14%
DOP plasticizer, and 3.5% CPW plasticizer. For maximum UTS the
compound should consist of: 17.5% DOP, 62.5% virgin PVC, and
20.0% CaCO3 of particle size 5 microns. Finally, for the highest
ductility the compound should be made of 35% virgin PVC, 20%
CaCO3 of particle size 5 microns, and 45.0% DOP plasticizer.
Abstract: The use of externally bonded Carbon Fiber
Reinforced Polymer (CFRP) reinforcement has proven to be an
effective technique to strengthen steel structures. An experimental
study on CFRP bonded steel plate with double strap joint has been
conducted and specimens are tested under tensile loadings. An
empirical model has been developed using stress-based approach to
predict ultimate capacity of the CFRP bonded steel structure. The
results from the model are comparable with the experimental result
with a reasonable accuracy.
Abstract: In this work the numerical simulation of transient heat
transfer in a cylindrical probe is done. An experiment was conducted
introducing a steel cylinder in a heating chamber and registering its
surface temperature along the time during one hour. In parallel, a
mathematical model was solved for one dimension transient heat
transfer in cylindrical coordinates, considering the boundary
conditions of the test. The model was solved using finite difference
method, because the thermal conductivity in the cylindrical steel bar
and the convection heat transfer coefficient used in the model are
considered temperature dependant functions, and both conditions
prevent the use of the analytical solution. The comparison between
theoretical and experimental results showed the average deviation is
below 2%. It was concluded that numerical methods are useful in
order to solve engineering complex problems. For constant k and h,
the experimental methodology used here can be used as a tool for
teaching heat transfer in mechanical engineering, using mathematical
simplified models with analytical solutions.
Abstract: For decades financial economists have been attempted to determine the optimal investment policy by recognizing the option value embedded in irreversible investment whose project value evolves as a geometric Brownian motion (GBM). This paper aims to examine the effects of the optimal investment trigger and of the misspecification of stochastic processes on investment in real options applications. Specifically, the former explores the consequence of adopting optimal investment rules on the distributions of corporate value under the correct assumption of stochastic process while the latter analyzes the influence on the distributions of corporate value as a result of the misspecification of stochastic processes, i.e., mistaking an alternative process as a GBM. It is found that adopting the correct optimal investment policy may increase corporate value by shifting the value distribution rightward, and the misspecification effect may decrease corporate value by shifting the value distribution leftward. The adoption of the optimal investment trigger has a major impact on investment to such an extent that the downside risk of investment is truncated at the project value of zero, thereby moving the value distributions rightward. The analytical framework is also extended to situations where collection lags are in place, and the result indicates that collection lags reduce the effects of investment trigger and misspecification on investment in an opposite way.
Abstract: Obsessive-Compulsive Disorder (OCD) is a common
and disabling condition. Therapist-delivered treatments that use
exposure and response prevention have been found to be very
effective in treating OCD, although they are costly and associated
with high rates of attrition. Effective treatments that can be made
widely available without the need for therapist contact are urgently
needed. This case study represents the first published investigation of
a self-administered cognitive treatment for OCD in a 50-year old
female with a 20 year history of OCD. The treatment evaluation
occurred over 27 weeks, including 12 weeks of self-administration of
the Danger Ideation Reduction Therapy (DIRT) program. Decreases
of between 23% to 33% on measures from pre-treatment to follow-up
were observed. Bearing in mind the methodological limitations
associated with a case study, we conclude that the results reported
here are encouraging and indicate that further research effort
evaluating the effectiveness of self-administered DIRT is warranted.
Abstract: This paper proposes a synchronized random switching frequency pulse width modulation (SRSFPWM). In this technique, the clock signal is used to control the random noise frequency which is produced by the feedback voltage of a hysteresis circuit. These make the triangular carrier frequency equaling to the random noise frequency in each switching period with the symmetrical positive and negative slopes of triangular carrier. Therefore, there is no error voltage in PWM signal. The PSpice simulated results shown the proposed technique improved the performance in case of low frequency harmonics of PWM signal comparing with conventional random switching frequency PWM.
Abstract: The design of a complete expansion that allows for
compact representation of certain relevant classes of signals is a
central problem in signal processing applications. Achieving such a
representation means knowing the signal features for the purpose of
denoising, classification, interpolation and forecasting. Multilayer
Neural Networks are relatively a new class of techniques that are
mathematically proven to approximate any continuous function
arbitrarily well. Radial Basis Function Networks, which make use of
Gaussian activation function, are also shown to be a universal
approximator. In this age of ever-increasing digitization in the
storage, processing, analysis and communication of information,
there are numerous examples of applications where one needs to
construct a continuously defined function or numerical algorithm to
approximate, represent and reconstruct the given discrete data of a
signal. Many a times one wishes to manipulate the data in a way that
requires information not included explicitly in the data, which is
done through interpolation and/or extrapolation.
Tidal data are a very perfect example of time series and many
statistical techniques have been applied for tidal data analysis and
representation. ANN is recent addition to such techniques. In the
present paper we describe the time series representation capabilities
of a special type of ANN- Radial Basis Function networks and
present the results of tidal data representation using RBF. Tidal data
analysis & representation is one of the important requirements in
marine science for forecasting.
Abstract: Thermochemcial characteristics of powder fabricated
using oxidation treatment of spent PWR fuel and SIMFUEL were
evaluated for recycling of spent fuel such as DUPIC process.
Especially, the influence of spent fuel burn-ups on the powder
fabrication characteristics was experimentally evaluated, ranging from
27,300 to 65,000 MWd/tU. Densities of powder manufactured from an
oxidation, OREOX and the milling processes at the same process
conditions were compared as a function of the fuel burn-ups
respectively. Also, based on chemical analysis results, homogeneity of
fissile elements in oxidized powder was confirmed.
Abstract: Users of computer systems may often require the
private transfer of messages/communications between parties across
a network. Information warfare and the protection and dominance of
information in the military context is a prime example of an
application area in which the confidentiality of data needs to be
maintained. The safe transportation of critical data is therefore often
a vital requirement for many private communications. However,
unwanted interception/sniffing of communications is also a
possibility. An elementary stealthy transfer scheme is therefore
proposed by the authors. This scheme makes use of encoding,
splitting of a message and the use of a hashing algorithm to verify the
correctness of the reconstructed message. For this proof-of-concept
purpose, the authors have experimented with the random sending of
encoded parts of a message and the construction thereof to
demonstrate how data can stealthily be transferred across a network
so as to prevent the obvious retrieval of data.
Abstract: In this study an extensive experimental research is
carried out to develop a better understanding of the effects of Piano Key (PK) weir geometry on weir flow threshold submergence.
Experiments were conducted in a 12 m long, 0.4 m wide and 0.7 m deep rectangular glass wall flume. The main objectives were to
investigate the effect of the PK weir geometries including the weir
length, weir height, inlet-outlet key widths, upstream and
downstream apex overhangs, and slopped floors on threshold submergence and study the hydraulic flow characteristics. From the
experimental results, a practical formula is proposed to evaluate the flow threshold submergence over PK weirs.
Abstract: It is necessary to incorporate technological advances
achieved in the field of engineering into dentistry in order to enhance
the process of diagnosis, treatment planning and enable the doctors to
render better treatment to their patients. To achieve this ultimate goal
long distance collaborations are often necessary. This paper discusses
the various collaborative tools and their applications to solve a few
burning problems confronted by the dentists. Customization is often
the solution to most of the problems. But rapid designing,
development and cost effective manufacturing is a difficult task to
achieve. This problem can be solved using the technique of digital
manufacturing. Cases from 6 major branches of dentistry have been
discussed and possible solutions with the help of state of art
technology using rapid digital manufacturing have been proposed in
the present paper. The paper also entails the usage of existing tools in
collaborative and digital manufacturing area.
Abstract: The purpose of this paper is to describe the process of
setting up a learning community within an elementary school in
Ontario, Canada. The description is provided through reflection and
examination of field notes taken during the yearlong training and
implementation process. Specifically the impact of teachers- capacity
on the creation of a learning community was of interest. This paper is
intended to inform and add to the debate around the tensions that
exist in implementing a bottom-up professional development model
like the learning community in a top-down organizational structure.
My reflections of the process illustrate that implementation of the
learning community professional development model may be
difficult and yet transformative in the professional lives of the
teachers, students, and administration involved in the change process.
I conclude by suggesting the need for a new model of professional
development that requires a transformative shift in power dynamics
and a shift in the view of what constitutes effective professional
learning.
Abstract: There are multiple reasons to expect that detecting the
word order errors in a text will be a difficult problem, and detection
rates reported in the literature are in fact low. Although grammatical
rules constructed by computer linguists improve the performance of
grammar checker in word order diagnosis, the repairing task is still
very difficult. This paper presents an approach for repairing word
order errors in English text by reordering words in a sentence and
choosing the version that maximizes the number of trigram hits
according to a language model. The novelty of this method concerns
the use of an efficient confusion matrix technique for reordering the
words. The comparative advantage of this method is that works with
a large set of words, and avoids the laborious and costly process of
collecting word order errors for creating error patterns.