Abstract: Patients with diabetes are susceptible to chronic foot
wounds which may be difficult to manage and slow to heal.
Diagnosis and treatment currently rely on the subjective judgement of
experienced professionals. An objective method of tissue assessment
is required. In this paper, a data fusion approach was taken to wound
tissue classification. The supervised Maximum Likelihood and
unsupervised Multi-Modal Expectation Maximisation algorithms
were used to classify tissues within simulated wound models by
weighting the contributions of both colour and 3D depth information.
It was found that, at low weightings, depth information could show
significant improvements in classification accuracy when compared
to classification by colour alone, particularly when using the
maximum likelihood method. However, larger weightings were
found to have an entirely negative effect on accuracy.
Abstract: The ε4 allele of the ε2, ε3 and ε4 protein isoform polymorphism in the gene encoding apolipoprotein E (Apo E) has previously been associated with increased cardiac artery disease (CAD); therefore to investigate the significance of this polymorphism in pathogenesis of CAD in Iranian patients with stenosis and control subjects. To investigate the association between
Apo E polymorphism and coronary artery disease we performed a comparative case control study of the frequency of Apo E
polymorphism in One hundred CAD patients with stenosis who underwent coronary angiography (>50% stenosis) and 100 control subjects (
Abstract: In this paper, we present a cost-effective wireless
distributed load shedding system for non-emergency scenarios. In
power transformer locations where SCADA system cannot be used,
the proposed solution provides a reasonable alternative that combines
the use of microcontrollers and existing GSM infrastructure to send
early warning SMS messages to users advising them to proactively
reduce their power consumption before system capacity is reached
and systematic power shutdown takes place.
A novel communication protocol and message set have been
devised to handle the messaging between the transformer sites, where
the microcontrollers are located and where the measurements take
place, and the central processing site where the database server is
hosted. Moreover, the system sends warning messages to the endusers
mobile devices that are used as communication terminals. The
system has been implemented and tested via different experimental
results.
Abstract: Because of the great advance in multimedia
technology, digital multimedia is vulnerable to malicious
manipulations. In this paper, a public key self-recovery block-based
video authentication technique is proposed which can not only
precisely localize the alteration detection but also recover the missing
data with high reliability. In the proposed block-based technique,
multiple description coding MDC is used to generate two codes (two
descriptions) for each block. Although one block code (one
description) is enough to rebuild the altered block, the altered block
is rebuilt with better quality by the two block descriptions. So using
MDC increases the ratability of recovering data. A block signature is
computed using a cryptographic hash function and a doubly linked
chain is utilized to embed the block signature copies and the block
descriptions into the LSBs of distant blocks and the block itself. The
doubly linked chain scheme gives the proposed technique the
capability to thwart vector quantization attacks. In our proposed
technique , anyone can check the authenticity of a given video using
the public key. The experimental results show that the proposed
technique is reliable for detecting, localizing and recovering the
alterations.
Abstract: The Taiwan government has started to promote the “Plain Landscape Afforestation and Greening Program" since 2002. A key task of the program was the payment for environmental services (PES), entitled the “Plain Landscape Afforestation Policy" (PLAP), which was certificated by the Executive Yuan on August 31, 2001 and enacted on January 1, 2002. According to the policy, it is estimated that the total area of afforestation will be 25,100 hectares by December 31, 2007. Until the end of 2007, the policy had been enacted for six years in total and the actual area of afforestation was 8,919.18 hectares. Among them, Taiwan Sugar Corporation (TSC) was accounted for 7,960 hectares (with 2,450.83 hectares as public service area) which occupied 86.22% of the total afforestation area; the private farmland promoted by local governments was accounted for 869.18 hectares which occupied 9.75% of the total afforestation area. Based on the above, we observe that most of the afforestation area in this policy is executed by TSC, and the achievement ratio by TSC is better than by others. It implies that the success of the PLAP is seriously related to the execution of TSC. The objective of this study is to analyze the relevant policy planning of TSC's participation in the PLAP, suggest complementary measures, and draw up effective adjustment mechanisms, so as to improve the effectiveness of executing the policy. Our main conclusions and suggestions are summarized as follows: 1. The main reason for TSC’s participation in the PLAP is based on their passive cooperation with the central government or company policy. Prior to TSC’s participation in the PLAP, their lands were mainly used for growing sugarcane. 2. The main factors of TSC's consideration on the selection of tree species are based on the suitability of land and species. The largest proportion of tree species is allocated to economic forests, and the lack of technical instruction was the main problem during afforestation. Moreover, the method of improving TSC’s future development in leisure agriculture and landscape business becomes a key topic. 3. TSC has developed short and long-term plans on participating in the PLAP for the future. However, there is no great willingness or incentive on budgeting for such detailed planning. 4. Most people from TSC interviewed consider the requirements on PLAP unreasonable. Among them, an unreasonable requirement on the number of trees accounted for the greatest proportion; furthermore, most interviewees suggested that the government should continue to provide incentives even after 20 years. 5. Since the government shares the same goals as TSC, there should be sufficient cooperation and communication that support the technical instruction and reduction of afforestation cost, which will also help to improve effectiveness of the policy.
Abstract: This study was carried out to reveal the bacterial composition of aerosol in the studied abattoirs. Bacteria isolated were characterized according to microbiological standards. Factors such as temperature and distance were considered as variable in this study. The isolation was carried out at different temperatures such as 27oC, 31oC and 29oC and at various distances of 100meters and 200meters away from the slaughter sites. Result obtained showed that strains of Staphylococcus aureus, Escherichia coli, Bacillus subtilis, Lactobacillus alimentarius and Micrococcus sp. were identified. The total viable counts showed that more microorganisms were present in the morning while the least viable count of 388cfu was recorded in the evening period of this study. This study also showed that more microbial loads were recorded the further the distance is to the slaughter site. Conclusively, the array of bacteria isolated suggests that abattoir sites may be a potential source of pathogenic organisms to commuters if located within residential environment.
Abstract: Business process automation is an important task in an
enterprise business environment software development. The
requirements of processing acceleration and automation level of
enterprises are inherently different from one organization to another.
We present a methodology and system for automation of business
process management system architecture by multi-agent collaboration
based on SOA. Design layer processes are modeled in semantic
markup language for web services application. At the core of our
system is considering certain types of human tasks to their further
automation across over multiple platform environments. An
improved abnormality processing with model for automation of
BPMS architecture by multi-agent collaboration based on SOA is
introduced. Validating system for efficiency of process automation,
an application for educational knowledge base instance would also be
described.
Abstract: Based on general proportional integral (GPI) observers and sliding mode control technique, a robust control method is proposed for the master-slave synchronization of chaotic systems in the presence of parameter uncertainty and with partially measurable output signal. By using GPI observer, the master dynamics are reconstructed by the observations from a measurable output under the differential algebraic framework. Driven by the signals provided by GPI observer, a sliding mode control technique is used for the tracking control and synchronization of the master-slave dynamics. The convincing numerical results reveal the proposed method is effective, and successfully accommodate the system uncertainties, disturbances, and noisy corruptions.
Abstract: Using Internet communication, new home electronics
have functions of monitoring and control from remote. However in
many case these electronics work as standalone, and old electronics
are not followed. Then, we developed the total remote system include
not only new electronics but olds. This systems node is a adapter of
electrical power plug that embed relay switch and some sensors, and
these nodes communicate with each other. the system server was build
on the Internet, and users access to this system from web browsers.
To reduce the cost to set up of this system, communication between
adapters are used ZigBee wireless network instead of wired LAN
cable[3]. From measured RSSI(received signal strength indicator)
information between each nodes, the system can estimate roughly
adapters were mounted on which room, and where in the room. So
also it reduces the cost of mapping nodes. Using this system, energy
saving and house monitoring are expected.
Abstract: InGaAsN and GaAsN epitaxial layers with similar
nitrogen compositions in a sample were successfully grown on a
GaAs (001) substrate by solid source molecular beam epitaxy. An
electron cyclotron resonance nitrogen plasma source has been used to
generate atomic nitrogen during the growth of the nitride layers. The
indium composition changed from sample to sample to give
compressive and tensile strained InGaAsN layers. Layer
characteristics have been assessed by high-resolution x-ray
diffraction to determine the relationship between the lattice constant
of the GaAs1-yNy layer and the fraction x of In. The objective was to
determine the In fraction x in an InxGa1-xAs1-yNy epitaxial layer which
exactly cancels the strain present in a GaAs1-yNy epitaxial layer with
the same nitrogen content when grown on a GaAs substrate.
Abstract: This essay presents applicative methods to reduce human exposure levels in the area around base transceiver stations in a environment with multiple sources based on ITU-T recommendation K.70. An example is presented to understand the mitigation techniques and their results and also to learn how they can be applied, especially in developing countries where there is not much research on non-ionizing radiations.
Abstract: Workflow Management Systems (WfMS) alloworganizations to streamline and automate business processes and reengineer their structure. One important requirement for this type of system is the management and computation of the Quality of Service(QoS) of processes and workflows. Currently, a range of Web processes and workflow languages exist. Each language can be characterized by the set of patterns they support. Developing andimplementing a suitable and generic algorithm to compute the QoSof processes that have been designed using different languages is a difficult task. This is because some patterns are specific to particular process languages and new patterns may be introduced in future versions of a language. In this paper, we describe an adaptive algorithm implemented to cope with these two problems. The algorithm is called adaptive since it can be dynamically changed as the patterns of a process language also change.
Abstract: The notions of prime(semiprime) fuzzy h-ideal(h-biideal,
h-quasi-ideal) in Γ-hemiring are introduced and some of their
characterizations are obtained by using "belongingness(∈)" and
"quasi - coincidence(q)". Cartesian product of prime(semiprime)
fuzzy h-ideals of Γ-hemirings are also investigated.
Abstract: A dissimilarity measure between the empiric
characteristic functions of the subsamples associated to the different
classes in a multivariate data set is proposed. This measure can be
efficiently computed, and it depends on all the cases of each class. It
may be used to find groups of similar classes, which could be joined
for further analysis, or it could be employed to perform an
agglomerative hierarchical cluster analysis of the set of classes. The
final tree can serve to build a family of binary classification models,
offering an alternative approach to the multi-class SVM problem. We
have tested this dendrogram based SVM approach with the oneagainst-
one SVM approach over four publicly available data sets,
three of them being microarray data. Both performances have been
found equivalent, but the first solution requires a smaller number of
binary SVM models.
Abstract: In this paper, we propose a dynamic TDMA slot
reservation (DTSR) protocol for cognitive radio ad hoc networks.
Quality of Service (QoS) guarantee plays a critically important role
in such networks. We consider the problem of providing QoS
guarantee to users as well as to maintain the most efficient use of
scarce bandwidth resources. According to one hop neighboring
information and the bandwidth requirement, our proposed protocol
dynamically changes the frame length and the transmission schedule.
A dynamic frame length expansion and shrinking scheme that
controls the excessive increase of unassigned slots has been
proposed. This method efficiently utilizes the channel bandwidth by
assigning unused slots to new neighboring nodes and increasing the
frame length when the number of slots in the frame is insufficient to
support the neighboring nodes. It also shrinks the frame length when
half of the slots in the frame of a node are empty. An efficient slot
reservation protocol not only guarantees successful data
transmissions without collisions but also enhance channel spatial
reuse to maximize the system throughput. Our proposed scheme,
which provides both QoS guarantee and efficient resource utilization,
be employed to optimize the channel spatial reuse and maximize the
system throughput. Extensive simulation results show that the
proposed mechanism achieves desirable performance in multichannel
multi-rate cognitive radio ad hoc networks.
Abstract: The public sector holds large amounts of data of
various areas such as social affairs, economy, or tourism. Various
initiatives such as Open Government Data or the EU Directive on
public sector information aim to make these data available for public
and private service providers. Requirements for the provision of
public sector data are defined by legal and organizational
frameworks. Surprisingly, the defined requirements hardly cover
security aspects such as integrity or authenticity.
In this paper we discuss the importance of these missing
requirements and present a concept to assure the integrity and
authenticity of provided data based on electronic signatures. We
show that our concept is perfectly suitable for the provisioning of
unaltered data. We also show that our concept can also be extended
to data that needs to be anonymized before provisioning by
incorporating redactable signatures. Our proposed concept enhances
trust and reliability of provided public sector data.
Abstract: The paper discusses optimising work on a method of processing ceramic / metal composite coatings for various applications and is based on preliminary work on processing anodes for solid oxide fuel cells (SOFCs). The composite coating is manufactured by the electroless co-deposition of nickel and yttria stabilised zirconia (YSZ) simultaneously on to a ceramic substrate. The effect on coating characteristics of substrate surface treatments and electroless nickel bath parameters such as pH and agitation methods are also investigated. Characterisation of the resulting deposit by scanning electron microscopy (SEM) and energy dispersive X-ray analysis (EDXA) is also discussed.
Abstract: The paper proposes a methodology to process the signals coming from the Transcranial Magnetic Stimulation (TMS) in order to identify the pathology and evaluate the therapy to treat the patients affected by demency diseases. In particular, a fuzzy model is developed to identify the demency of the patients affected by Subcortical Ischemic Vascular Dementia and to measure the positive effect, if any, of a repetitive TMS on their motor performances. A tool is also presented to support the mentioned analysis.
Abstract: This paper introduces a novel design for boring bar with enhanced damping capability. The principle followed in the design phase was to enhance the damping capability minimizing the loss in static stiffness through implementation of composite material interfaces. The newly designed tool has been compared to a conventional tool. The evaluation criteria were the dynamic characteristics, frequency and damping ratio, of the machining system, as well as the surface roughness of the machined workpieces. The use of composite material in the design of damped tool has been demonstrated effective. Furthermore, the autoregressive moving average (ARMA) models presented in this paper take into consideration the interaction between the elastic structure of the machine tool and the cutting process and can therefore be used to characterize the machining system in operational conditions.
Abstract: The purpose of this study is to investiagte the use of
the ecommerce website in Indonesia as a developing country. The
ecommerce website has been identified having the significant impact
on business activities in particular solving the geographical problem
for islanded countries likes Indonesia. Again, website is identified as
a crucial marketing tool. This study presents the effect of quality and
features on the use and user satisfaction employing ecommerce
websites. Survey method for 115 undergraduate students of
Management Department in Andalas University who are attending
Management Information Systems (SIM) class have been
undertaken. The data obtained is analyzed using Structural Equation
Modeling (SEM) using SmartPLS program. This result found that
quality of system and information, feature as well satisfaction
influencing the use ecommerce website in Indonesia contexts.