Abstract: This work shows a basic philosophical difficulty in the constructivist foundations of the cognitive posracionalist psychology of Vittorio Guidano. This is a difficulty caused by the problem of the existential crisis. It will be analyzed how Guidano-s suggestions about this problem depend on felt experience. Then it will appear how Guidano-s philosophy and psychotherapy must turn towards a phenomenological approach. Finally, some references are given about Eugen Gendlin-s philosophy which could be considered as a radical way to confront these questions.
Abstract: The objective of this paper is to establish a possible relationship between sustainable business practice and firm performance. Using a field survey methodology, a sample of sixty manufacturing companies in Nigeria was studied. The firms were categorised into two groups, environmentally 'responsible' and 'irresponsible' firms. An investigation was undertaken into the possible relationship between firm performance and three selected indicators of sustainable business practice: employee health and safety (EHS), waste management (WM), and community development (CD), common within the 30 'responsible' firms. Findings from empirical results reveal that the sustainable practices of the 'responsible' firms are significantly related with firm performance. In addition, sustainable practices are inversely related with fines and penalties. The paper concludes that, within the Nigerian setting at least, sustainability affects corporate performance and sustainability may be a possible tool for corporate conflict resolution as evidenced in the reduction of fines, penalties and compensations. The paper therefore recommends research into the relationship between sustainability and conflict management.
Abstract: For a determined intermediate band position, the effects of electron filling factor and sunlight concentration on the active region thickness and efficiency of the quantum-dot intermediate band solar cell are calculated. For each value of electron filling factor, the maximum point of efficiency obtained and resulted in the optimum thickness of the cell under three different sunlight concentrations. We show the importance of filling factor as a parameter to be more considered. The photon recycling effect eliminated in all calculations.
Abstract: The strawberry jam is rich in bioactive compounds. It
is economically and commercially important and widely consumed.
Different strawberries cultivars can be used for its preparation,
however, a careful selection should be performed to guarantee the
preservation of bioactive compounds during jam storage. Two
strawberry cultivars (Camarosa and American 13) were analyzed by
HPLC, three anthocyanins: cyanidin-3-glucoside, pelargonidin-3-
glucoside and pelargonidin-3-rutinoside were quantified. Camarosa
strawberries presented significantly higher concentration of
anthocyanins (p
Abstract: This paper shows possibility of extraction Social,
Group and Individual Mind from Multiple Agents Rule Bases. Types
those Rule bases are selected as two fuzzy systems, namely
Mambdani and Takagi-Sugeno fuzzy system. Their rule bases are
describing (modeling) agent behavior. Modifying of agent behavior
in the time varying environment will be provided by learning fuzzyneural
networks and optimization of their parameters with using
genetic algorithms in development system FUZNET. Finally,
extraction Social, Group and Individual Mind from Multiple Agents
Rule Bases are provided by Cognitive analysis and Matching
criterion.
Abstract: Eight Etawah cross bred does were divided into two
groups based on body condition score (BCS). Group I (BSC 2, body
weight 25-30 kg; n = 4), and Group II (BSC 3, body weight, 35-40 kg, n=4). All does received intravaginal controlled internal drug
release devices (CIDR) for 10 days, and a prostaglandin F2α at 48 h before CIDR removal. Estrus detection was carried out using
vasectomized buck. Vaginal epithelium was taken to determine estrus cycle. Blood samples were taken every 3-6 hours, started from
moment of CIDR removal until the end of estrus. The results showed vaginal histological indicated estrus occurred at the hours of 25 to 60
and 30 to 70 post CIDR removal in BCS 2 and 3, respectively. Progesterone peak of BCS 2 and BCS 3 were 0.18±0.31 and
0.48±0.31 ng/mL on the hour 0 post CIDR removal. Estradiol -17ß
peak of each group was 53.25±35.08 and 89.91±92.84 pg/mL at 48
post CIDR removal. LH surge only occurred on BCS 3 groups, the LH concentrations were 9.9± 9.1; 4.5± 4.0; and 18.2± 9.1 ng/mL at
45, 48 and 51 hours post CIDR removal, respectively. It was concluded that the BCS had effects on vaginal histological changes
and LH surge.
Abstract: This paper presents one comprehensive modelling approach for maintenance scheduling problem of thermal power units in competitive market. This problem is formulated as a 0/1 mixedinteger linear programming model. Model incorporates long-term bilateral contracts with defined profiles of power and price, and weekly forecasted market prices for market auction. The effectiveness of the proposed model is demonstrated through case study with detailed discussion.
Abstract: The alumosilicate ceramics with mullite crystalline phase are used in various branches of science and technique. The mullite refractory ceramics with high porosity serve as a heat insulator and as a constructional materials [1], [2]. The purpose of the work was to sinter high porosity ceramic and to increase the quantity of mullite phase in this mullite, mullite-corundum ceramics. Two types of compositions were prepared at during the experiment. The first type is compositions with commercial alumina and silica oxides. The second type is from mixing these oxides with 10, 20 and 30 wt.%. of kaolin. In all samples the Al2O3 and SiO2 were in 2.57:1 ratio, because that was conformed to mullite stechiometric compositions (3Al2O3.2SiO2). The types of alumina oxides were α-Al2O3 (d50=4µm) and γ-Al2O3 (d50=80µm). Ratios of α-: γ-Al2O3 were (1:1) or (1:3). The porous materials were prepared by slip casting of suspension of raw materials. The aluminium paste (0.18 wt.%) was used as a pore former. Water content in the suspensions was 26-47 wt.%. Pore formation occurred as a result of hydrogen formation in chemical reaction between aluminium paste and water [2]. The samples were sintered at the temperature of 1650°C and 1750°C for one hour. The increasing amount of kaolin, α-: γ-Al2O3 at the ratio (1:3) and sintering at the highest temperature raised the quantity of mullite phase. The mullite phase began to dominate over the corundum phase.
Abstract: Policy management in organizations became rising issue in the last decade. It’s because of today’s regulatory requirements in the organizations. To manage policies in large organizations is an imperative work. However, major challenges facing organizations in the last decade is managing all the policies in the organization and making them an active documents rather than simple (inactive) documents stored in computer hard drive or on a shelf. Because of this challenge, organizations need policy management program. This policy management program can be either manual or automated. This paper presents suggestions towards managing policies in organizations. As well as possible policy management solution or program to be utilized, manual or automated. The research first examines the models and frameworks used for managing policies from various perspectives in the literature of the research area/domain. At the end of this paper, a policy management framework is proposed for managing enterprise policies effectively and in a simplified manner.
Abstract: In this paper smooth trajectories are computed in the Lie group SO(2, 1) as a motion planning problem by assigning a Frenet frame to the rigid body system to optimize the cost function of the elastic energy which is spent to track a timelike curve in Minkowski space. A method is proposed to solve a motion planning problem that minimizes the integral of the Lorentz inner product of Darboux vector of a timelike curve. This method uses the coordinate free Maximum Principle of Optimal control and results in the theory of integrable Hamiltonian systems. The presence of several conversed quantities inherent in these Hamiltonian systems aids in the explicit computation of the rigid body motions.
Abstract: There have been numerous implementations of
security system using biometric, especially for identification and
verification cases. An example of pattern used in biometric is the iris
pattern in human eye. The iris pattern is considered unique for each
person. The use of iris pattern poses problems in encoding the human
iris.
In this research, an efficient iris recognition method is proposed.
In the proposed method the iris segmentation is based on the
observation that the pupil has lower intensity than the iris, and the
iris has lower intensity than the sclera. By detecting the boundary
between the pupil and the iris and the boundary between the iris and
the sclera, the iris area can be separated from pupil and sclera. A step
is taken to reduce the effect of eyelashes and specular reflection of
pupil. Then the four levels Coiflet wavelet transform is applied to the
extracted iris image. The modified Hamming distance is employed to
measure the similarity between two irises.
This research yields the identification success rate of 84.25% for
the CASIA version 1.0 database. The method gives an accuracy of
77.78% for the left eyes of MMU 1 database and 86.67% for the
right eyes. The time required for the encoding process, from the
segmentation until the iris code is generated, is 0.7096 seconds.
These results show that the accuracy and speed of the method is
better than many other methods.
Abstract: In this study, the problem of discriminating between interictal epileptic and non- epileptic pathological EEG cases, which present episodic loss of consciousness, investigated. We verify the accuracy of the feature extraction method of autocross-correlated coefficients which extracted and studied in previous study. For this purpose we used in one hand a suitable constructed artificial supervised LVQ1 neural network and in other a cross-correlation technique. To enforce the above verification we used a statistical procedure which based on a chi- square control. The classification and the statistical results showed that the proposed feature extraction is a significant accurate method for diagnostic discrimination cases between interictal and non-interictal EEG events and specifically the classification procedure showed that the LVQ neural method is superior than the cross-correlation one.
Abstract: The purpose of this research aims to discover the
knowledge for analysis student motivation behavior on e-Learning
based on Data Mining Techniques, in case of the Information
Technology for Communication and Learning Course at Suan
Sunandha Rajabhat University. The data mining techniques was
applied in this research including association rules, classification
techniques. The results showed that using data mining technique can
indicate the important variables that influence the student motivation
behavior on e-Learning.
Abstract: This paper presents a new method for estimating the nonstationary
noise power spectral density given a noisy signal. The
method is based on averaging the noisy speech power spectrum using
time and frequency dependent smoothing factors. These factors are
adjusted based on signal-presence probability in individual frequency
bins. Signal presence is determined by computing the ratio of the
noisy speech power spectrum to its local minimum, which is updated
continuously by averaging past values of the noisy speech power
spectra with a look-ahead factor. This method adapts very quickly to
highly non-stationary noise environments. The proposed method
achieves significant improvements over a system that uses voice
activity detector (VAD) in noise estimation.
Abstract: The study aims to investigate the impact on board and
audit committee characteristics and firm performance before and
after the revision of MCCG (2007) on GLCs over the period 2005-2010. We used Return on Assets (ROA) as a proxy for firm performance. The data consists of two groups; data collected before
and after the amendments of MCCG (2007). Findings show that
boards of directors with accounting / finance qualifications (BEXP)
are statistically significant with performance for period before the amendments. As for audit committee members with accounting or
finance qualifications (ACEXP), correlation results indicate a
negative association and non-significant results for the years before
amendments. However, the years after the amendments show
positive relationship with highly significant correlations (1%) to ROA. This indicates that the amendments of MCCG 2007 on the
audit committee members- literacy in accounting have impacted the governance structures and performance of GLCs.
Abstract: In aircraft applications, according to the nature of
electrical equipment its location may be in unpressurized area or very
close to the engine; thus, the environmental conditions may change
from atmospheric pressure to less than 100 mbar, and the temperature
may be higher than the ambient one as in most real working
conditions of electrical equipment. Then, the classical Paschen curve
has to be replotted since these parameters may affect the discharge
ignition voltage. In this paper, we firstly investigate the domain of
validity of two corrective expressions on the Paschen-s law found in
the literature, in case of changing the air environment and known as
Peek and Dunbar corrections. Results show that these corrections are
no longer valid for combined variation of temperature and pressure.
After that, a new empirical expression for breakdown voltage is
proposed and is validated in the case of combined variations of
temperature and pressure.
Abstract: Data gathering is an essential operation in wireless
sensor network applications. So it requires energy efficiency
techniques to increase the lifetime of the network. Similarly,
clustering is also an effective technique to improve the energy
efficiency and network lifetime of wireless sensor networks. In this
paper, an energy efficient cluster formation protocol is proposed with
the objective of achieving low energy dissipation and latency without
sacrificing application specific quality. The objective is achieved by
applying randomized, adaptive, self-configuring cluster formation
and localized control for data transfers. It involves application -
specific data processing, such as data aggregation or compression.
The cluster formation algorithm allows each node to make
independent decisions, so as to generate good clusters as the end.
Simulation results show that the proposed protocol utilizes minimum
energy and latency for cluster formation, there by reducing the
overhead of the protocol.
Abstract: Drought is one of the most damaging climate-related
hazards, it is generally considered as a prolonged absence of
precipitation. This normal and recurring climate phenomenon had
plagued civilization throughout history because of the negative
impacts on economical, environmental and social sectors. Drought
characteristics are thus recognized as important factors in water
resources planning and management. The purpose of this study is to
detect the changes in drought frequency, persistence and severity
in the Ruhr river basin. The frequency of drought events was
calculated using the Standardized Precipitation Index (SPI). Used
data are daily precipitation records from seven meteorological
stations covering the period 1961-2007. The main benefit of the
application of this index is its versatility, only rainfall data is required
to deliver five major dimensions of a drought : duration, intensity,
severity, magnitude, and frequency. Furthermore, drought can be
calculated in different time steps. In this study SPI was calculated for
1, 3, 6, 9, 12, and 24 months. Several drought events were detected
in the covered period, these events contain mild, moderate and severe
droughts. Also positive and negative trends in the SPI values were
observed.
Abstract: Over the past several years, there has been a
considerable amount of research within the field of Quality of
Service (QoS) support for distributed multimedia systems. One of the
key issues in providing end-to-end QoS guarantees in packet
networks is determining a feasible path that satisfies a number of
QoS constraints. The problem of finding a feasible path is NPComplete
if number of constraints is more than two and cannot be
exactly solved in polynomial time. We proposed Feasible Path
Selection Algorithm (FPSA) that addresses issues with pertain to
finding a feasible path subject to delay and cost constraints and it
offers higher success rate in finding feasible paths.
Abstract: This paper presents an on-going research work on the
implementation of feature-based machining via macro programming.
Repetitive machining features such as holes, slots, pockets etc can
readily be encapsulated in macros. Each macro consists of methods
on how to machine the shape as defined by the feature. The macro
programming technique comprises of a main program and
subprograms. The main program allows user to select several
subprograms that contain features and define their important
parameters. With macros, complex machining routines can be
implemented easily and no post processor is required. A case study
on machining of a part that comprised of planar face, hole and pocket
features using the macro programming technique was carried out. It
is envisaged that the macro programming technique can be extended
to other feature-based machining fields such as the newly developed
STEP-NC domain.