Abstract: In electronegative-electropositive gas mixtures plasma, at a total pressure varying in the range of ten to hundred Torr, the appearance of a quasi-mochromatization effect of the emitted radiation was reported. This radiation could be the result of the generating mechanisms at molecular level, which is the case of the excimer radiation but also at atomic level. Thus, in the last case, in (Ne+1%Ar/Xe+H2) gas mixtures plasma in a dielectric barrier discharge, this effect, called M-effect, consists in the reduction of the discharge emission spectrum practice at one single, strong spectral line with λ = 585.3 nm. The present paper is concerned with the characteristics comparative investigation of the principal reaction mechanisms involved in the quasi-monochromatization effect existence in the case of the excimer radiation, respectively of the Meffect. Also, the paper points out the role of the metastable electronegative atoms in the appearance of the monochromatization – effect at atomic level.
Abstract: Many companies have excel, it is economy and well perform to use in material requirement planning (MRP) on excel. For several products, it, however, is complex problem to link the relationship between the tables of products because the relationship depends on bill of material (BOM). This paper presents algorithm to create MRP on excel, and links relationship between tables. The study reveals MRP that is created by the algorithm which is easier and faster than MRP that created by human. By this technique, MRP on excel might be good ways to improve a productivity of companies.
Abstract: E-services have significantly changed the way of
doing business in recent years. We can, however, observe poor use of
these services. There is a large gap between supply and actual eservices
usage. This is why we started a project to provide an
environment that will encourage the use of e-services. We believe
that only providing e-service does not automatically mean consumers
would use them. This paper shows the origins of our project and its
current position. We discuss the decision of using semantic web
technologies and their potential to improve e-services usage. We also
present current knowledge base and its real-world classification. In the paper, we discuss further work to be done in the project. Current
state of the project is promising.
Abstract: The evaluation of energy release rate and centre Crack
Opening Displacement (COD) for circumferential Through-Wall
Cracked (TWC) pipes is an important issue in the assessment of
critical crack length for unstable fracture. The ability to predict crack
growth continues to be an important component of research for
several structural materials. Crack growth predictions can aid the
understanding of the useful life of a structural component and the
determination of inspection intervals and criteria. In this context,
studies were carried out at CSIR-SERC on Nuclear Power Plant
(NPP) piping components subjected to monotonic as well as cyclic
loading to assess the damage for crack growth due to low-cycle
fatigue in circumferentially TWC pipes.
Abstract: Having done in this study, air-conditioning
automation for patisserie shopwindow was designed. In the cooling
sector it is quite important to cooling up the air temperature in the
shopwindow within short time interval. Otherwise the patisseries
inside of the shopwindow will be spoilt in a few days. Additionally
the humidity is other important parameter for the patisseries kept in
shopwindow. It must be raised up to desired level in a quite short
time. Traditional patisserie shopwindows only allow controlling
temperature manually. There is no humidity control and humidity is
supplied by fans that are directed to the water at the bottom of the
shopwindows. In this study, humidity and temperature sensors
(SHT11), PIC, AC motor controller, DC motor controller, ultrasonic
nebulizer and other electronic circuit members were used to simulate
air conditioning automation for patisserie shopwindow in proteus
software package. The simulation results showed that temperature
and humidity values are adjusted in desired time duration by openloop
control technique. Outer and inner temperature and humidity
values were used for control mechanism.
Abstract: The purpose of this study was to find out the
effectiveness of neurological impress method and repeated reading
technique on reading fluency of children with learning disabilities.
Thirty primary four pupils in three public primary schools
participated in the study. There were two experimental groups and a
control. This research employed a 3 by 2 factorial matrix and the
participants were taught for one session. Two hypotheses were
formulated to guide the research. T-test was used to analyse the data
gathered, and data analysis revealed that pupils exposed to the two
treatment strategies had improvement in their reading fluency. It was
recommended that the two strategies used in the study can be used to
intervene in reading fluency problems in children with learning
disabilities.
Abstract: Contact stress analysis between two spur gear
teeth was considered in different contact positions,
representing a pair of mating gears during rotation. A
programme has been developed to plot a pair of teeth in contact. This programme was run for each 3° of pinion
rotation from the first location of contact to the last location of
contact to produce 10 cases. Each case was represented a
sequence position of contact between these two teeth. The
programme gives graphic results for the profiles of these teeth
in each position and location of contact during rotation. Finite
element models were made for these cases and stress analysis
was done. The results were presented and finite element
analysis results were compared with theoretical calculations,
wherever available.
Abstract: This paper employs a the variable returns to scale DEA
model to take account of risky assets and estimate the operating
efficiencies for the 21 domestic listed securities firms during the
period 2005-2009. Evidence is found that on average the brokerage
securities firms- operating efficiencies are better than integrated
securities firms. Evidence is also found that the technical inefficiency
from inappropriate management constitutes the main source of the
operating inefficiency for both types of securities firms. Moreover, the
scale economies prevail in brokerage and integrated securities firms,
in other words, which exhibit the characteristic of increasing returns to
scale.
Abstract: The proliferation of user-generated content (UGC) results in huge opportunities to explore event patterns. However, existing event recommendation systems primarily focus on advanced information technology users. Little work has been done to address novice and low-literacy users. The next billion users providing and consuming UGC are likely to include communities from developing countries who are ready to use affordable technologies for subsistence goals. Therefore, we propose a design framework for providing event recommendations to address the needs of such users. Grounded in information integration theory (IIT), our framework advocates that effective event recommendation is supported by systems capable of (1) reliable information gathering through structured user input, (2) accurate sense making through spatial-temporal analytics, and (3) intuitive information dissemination through interactive visualization techniques. A mobile pest management application is developed as an instantiation of the design framework. Our preliminary study suggests a set of design principles for novice and low-literacy users.
Abstract: The transition to sustainable development requires
considerable investments from stakeholders, both financial and
immaterial. However, accounting for such investments often poses a
challenge, as ventures with intangible or non-financial returns remain
oblivious to conventional accounting techniques and risk assessment.
That such investments may significantly contribute to the welfare of
those affected may act as a driving force behind attempting to bridge
this gap. This gains crucial importance as investments must be also
backed by governments and administrations; entities whose budget
depends on taxpayers- contributions and whose tasks are based on
securing the welfare of their citizens. Besides economic welfare,
citizens also require social and environmental wellbeing too.
However, administrations must also safeguard that welfare is
guaranteed not only to present, but to future generations too. With
already strained budgets and the requirement of sustainable
development, governments on all levels face the double challenge of
making both of these ends meet.
Abstract: A vast array of biological materials, especially algae have received increasing attention for heavy metal removal. Algae have been proven to be cheaper, more effective for the removal of metallic elements in aqueous solutions. A fresh water algal strain was isolated from Zoo Lake, Johannesburg, South Africa and identified as Desmodesmus sp. This paper investigates the efficacy of Desmodesmus sp.in removing heavy metals contaminating the Wonderfonteinspruit Catchment Area (WCA) water bodies. The biosorption data fitted the pseudo-second order and Langmuir isotherm models. The Langmuir maximum uptakes gave the sequence: Mn2+>Ni2+>Fe2+. The best results for kinetic study was obtained in concentration 120 ppm for Fe3+ and Mn2+, whilst for Ni2+ was at 20 ppm, which is about the same concentrations found in contaminated water in the WCA (Fe3+115 ppm, Mn2+ 121 ppm and Ni2+ 26.5 ppm).
Abstract: Research has suggested that implicit learning tasks
may rely on episodic processing to generate above chance
performance on the standard classification tasks. The current
research examines the invariant features task (McGeorge and Burton,
1990) and argues that such episodic processing is indeed important.
The results of the experiment suggest that both rejection and
similarity strategies are used by participants in this task to
simultaneously reject unfamiliar items and to accept (falsely) familiar
items. Primarily these decisions are based on the presence of low or
high frequency goal based features of the stimuli presented in the
incidental learning phase. It is proposed that a goal based analysis of
the incidental learning task provides a simple step in understanding
which features of the episodic processing are most important for
explaining the match between incidental, implicit learning and test
performance.
Abstract: As there are also graph methods of circuit analysis in
addition to algebraic methods, it is, in theory, clearly possible to
carry out an analysis of a whole switched circuit in two-phase
switching exclusively by the graph method as well. This article deals
with two methods of full-graph solving of switched circuits: by
transformation graphs and by two-graphs. It deals with the circuit
switched capacitors and the switched current, too. All methods are
presented in an equally detailed steps to be able to compare.
Abstract: This paper describes a concept of stereotype student
model in adaptive knowledge acquisition e-learning system. Defined
knowledge stereotypes are based on student's proficiency level and
on Bloom's knowledge taxonomy. The teacher module is responsible
for the whole adaptivity process: the automatic generation of
courseware elements, their dynamic selection and sorting, as well as
their adaptive presentation using templates for statements and
questions. The adaptation of courseware is realized according to
student-s knowledge stereotype.
Abstract: In order to achieve better road utilization and traffic
efficiency, there is an urgent need for a travel information delivery
mechanism to assist the drivers in making better decisions in the
emerging intelligent transportation system applications. In this paper,
we propose a relayed multicast scheme under heterogeneous networks
for this purpose. In the proposed system, travel information consisting
of summarized traffic conditions, important events, real-time traffic
videos, and local information service contents is formed into layers
and multicasted through an integration of WiMAX infrastructure and
Vehicular Ad hoc Networks (VANET). By the support of adaptive
modulation and coding in WiMAX, the radio resources can be
optimally allocated when performing multicast so as to dynamically
adjust the number of data layers received by the users. In addition to
multicast supported by WiMAX, a knowledge propagation and
information relay scheme by VANET is designed. The experimental
results validate the feasibility and effectiveness of the proposed
scheme.
Abstract: In many applications, magnetic suspension systems
are required to operate over large variations in air gap. As a result,
the nonlinearities inherent in most types of suspensions have a
significant impact on performance. Specifically, it may be difficult to
design a linear controller which gives satisfactory performance,
stability, and disturbance rejection over a wide range of operating
points. in this paper an optimal controller based on discontinuous
mathematical model of the system for an electromagnetic suspension
system which is applied in magnetic trains has been designed .
Simulations show that the new controller can adapt well to the
variance of suspension mass and gap, and keep its dynamic
performance, thus it is superior to the classic controller.
Abstract: This paper discusses effects of adhesive thickness,
overlap length and material combinations on the single-lap
joints strength from the point of singular stress fields. A useful
method calculating the ratio of intensity of singular stress is
proposed using FEM for different adhesive thickness and
overlap length. It is found that the intensity of singular stress
increases with increasing adhesive thickness, and decreases
with increasing overlap length. The increment and decrement
are different depending on material combinations between
adhesive and adherent.
Abstract: This paper systematically investigates the timedependent
health outcomes for office staff during computer work
using the developed mathematical model. The model describes timedependent
health outcomes in multiple body regions associated with
computer usage. The association is explicitly presented with a doseresponse
relationship which is parametrized by body region
parameters. Using the developed model we perform extensive
investigations of the health outcomes statically and dynamically. We
compare the risk body regions and provide various severity rankings
of the discomfort rate changes with respect to computer-related
workload dynamically for the study population. Application of the
developed model reveals a wide range of findings. Such broad
spectrum of investigations in a single report literature is lacking.
Based upon the model analysis, it is discovered that the highest
average severity level of the discomfort exists in neck, shoulder, eyes,
shoulder joint/upper arm, upper back, low back and head etc. The
biggest weekly changes of discomfort rates are in eyes, neck, head,
shoulder, shoulder joint/upper arm and upper back etc. The fastest
discomfort rate is found in neck, followed by shoulder, eyes, head,
shoulder joint/upper arm and upper back etc. Most of our findings are
consistent with the literature, which demonstrates that the developed
model and results are applicable and valuable and can be utilized to
assess correlation between the amount of computer-related workload
and health risk.
Abstract: The present study is concerned with the free
convective two dimensional flow and heat transfer, within the
framework of Boussinesq approximation, in anisotropic fluid filled
porous rectangular enclosure subjected to end-to-end temperature
difference have been investigated using Lattice Boltzmann method
fornon-Darcy flow model. Effects of the moving lid direction (top,
bottom, left, and right wall moving in the negative and positive x&ydirections),
number of moving walls (one or two opposite walls), the
sliding wall velocity, and four different constant temperatures
opposite walls cases (two surfaces are being insulated and the
twoother surfaces areimposed to be at constant hot and cold
temperature)have been conducted. The results obtained are discussed
in terms of the Nusselt number, vectors, contours, and isotherms.
Abstract: Nowadays increasingly the population makes use of
Information Technology (IT). As such, in recent year the Portuguese
government increased its focus on using the IT for improving
people-s life and began to develop a set of measures to enable the
modernization of the Public Administration, and so reducing the gap
between Public Administration and citizens.Thus the Portuguese
Government launched the Simplex Program. However these
SIMPLEX eGov measures, which have been implemented over the
years, present a serious challenge: how to forecast its impact on
existing Information Systems Architecture (ISA). Thus, this research
is focus in addressing the problem of automating the evaluation of the
actual impact of implementation an eGovSimplification and
Modernization measures in the Information Systems Architecture. To
realize the evaluation we proposes a Framework, which is supported
by some key concepts as: Quality Factors, ISA modeling,
Multicriteria Approach, Polarity Profile and Quality Metrics