Abstract: Long Distance Truck Drivers (LDTDs) have been
found to be a high risk group in the spread of HIV/AIDS globally;
perhaps, due to their high Sexual Risk Behaviours (SRBs).
Interventions for reducing SRBs in trucking population have not been
fully exploited. A quasi-experimental control group pretest-posttest
design was used to assess the efficacy of psycho-education and
behavioural skills training in reducing SRBs among LDTDs. Sixteen
drivers rivers were randomly assigned into either experimental or
control groups using balloting technique. Questionnaire was used as
an instrument for data collection. Repeated measures t-test and
independent t-test were used to test hypotheses. Intervention had
significant effect on the SRBs among LDTDs at post-test (t{7}=
6.01, p
Abstract: For optimal unbiased filter as mean-square and in the
case of functioning anomalous noises in the observation memory
channel, we have proved insensitivity of filter to inaccurate
knowledge of the anomalous noise intensity matrix and its
equivalence to truncated filter plotted only by non anomalous
components of an observation vector.
Abstract: This paper presents development results of the method
of seismoacoustic activity monitoring based on usage vibrosensitive
properties of optical fibers. Analysis of Rayleigh backscattering
radiation parameters changes, which take place due to microscopic
seismoacoustic impacts on the optical fiber, allows to determine
seismoacoustic emission sources positions and to identify their types.
Results of using this approach are successful for complex monitoring
of railways.
Abstract: In this paper, a direct power control (DPC)
strategies have been investigated in order to control a high
power AC/DC converter with time variable load. This converter
is composed of a three level three phase neutral point clamped
(NPC) converter as rectifier and an H-bridge four quadrant
current control converter. In the high power application,
controller not only must adjust the desire outputs but also
decrease the level of distortions which are injected to the network
from the converter. Regarding to this reason and nonlinearity
of the power electronic converter, the conventional controllers
cannot achieve appropriate responses. In this research, the
precise mathematical analysis has been employed to design the
appropriate controller in order to control the time variable
load. A DPC controller has been proposed and simulated using
Matlab/ Simulink. In order to verify the simulation result, a real
time simulator- OPAL-RT- has been employed. In this paper,
the dynamic response and stability of the high power NPC
with variable load has been investigated and compared with
conventional types using a real time simulator. The results proved
that the DPC controller is more stable and has more precise
outputs in comparison with conventional controller.
Abstract: In this study, a computational fluid dynamics (CFD)
model has been developed for studying the effect of surface
roughness profile on the EHL problem. The cylinders contact
geometry, meshing and calculation of the conservation of mass and
momentum equations are carried out using the commercial software
packages ICEMCFD and ANSYS Fluent. The user defined functions
(UDFs) for density, viscosity and elastic deformation of the cylinders
as the functions of pressure and temperature are defined for the CFD
model. Three different surface roughness profiles are created and
incorporated into the CFD model. It is found that the developed CFD
model can predict the characteristics of fluid flow and heat transfer in
the EHL problem, including the main parameters such as pressure
distribution, minimal film thickness, viscosity, and density changes.
The results obtained show that the pressure profile at the center of the
contact area directly relates to the roughness amplitude. A rough
surface with kurtosis value of more than 3 has greater influence over
the fluctuated shape of pressure distribution than in other cases.
Abstract: In the past researchers have questioned the
effectiveness of ethics training in higher education. Also, there are
observations that support the view that ethical behaviour (range of
actions)/ethical decision making models used in the past make use of
vignettes to explain ethical behaviour. The understanding remains in
the perspective that these vignettes play a limited role in determining
individual intentions and not actions. Some authors have also agreed
that there are possibilities of differences in one’s intentions and
actions. This paper makes an attempt to fill those gaps by evaluating
real actions rather than intentions. In a way this study suggests the
use of an experiential methodology to explore Berlo’s model of
communication as an action along with orchestration of various
principles. To this endeavor, an attempt was made to use
conversational analysis in the pursuance of evaluating ethical
decision making behaviour among students and middle level
managers. The process was repeated six times with the set of an
average of 15 participants. Similarities have been observed in the
behaviour of students and middle level managers that calls for
understanding that both the groups of individuals have no cognizance
of their actual actions. The deliberations derived out of conversation
were taken a step forward for meta-ethical evaluations to portray a
clear picture of ethical behaviour among participants. This study
provides insights for understanding demonstrated unconscious human
behaviour which may fortuitously be termed both ethical and
unethical.
Abstract: Traditional document representation for classification
follows Bag of Words (BoW) approach to represent the term weights.
The conventional method uses the Vector Space Model (VSM) to
exploit the statistical information of terms in the documents and they
fail to address the semantic information as well as order of the terms
present in the documents. Although, the phrase based approach
follows the order of the terms present in the documents rather than
semantics behind the word. Therefore, a semantic concept based
approach is used in this paper for enhancing the semantics by
incorporating the ontology information. In this paper a novel method
is proposed to forecast the intraday stock market price directional
movement based on the sentiments from Twitter and money control
news articles. The stock market forecasting is a very difficult and
highly complicated task because it is affected by many factors such
as economic conditions, political events and investor’s sentiment etc.
The stock market series are generally dynamic, nonparametric, noisy
and chaotic by nature. The sentiment analysis along with wisdom of
crowds can automatically compute the collective intelligence of
future performance in many areas like stock market, box office sales
and election outcomes. The proposed method utilizes collective
sentiments for stock market to predict the stock price directional
movements. The collective sentiments in the above social media have
powerful prediction on the stock price directional movements as
up/down by using Granger Causality test.
Abstract: The arm length, hand length, hand breadth and middle
finger length of 1540 right-handed industrial workers of Haryana
state was used to assess the relationship between the upper limb
dimensions and stature. Initially, the data were analyzed using basic
univariate analysis and independent t-tests; then simple and multiple
linear regression models were used to estimate stature using SPSS
(version 17). There was a positive correlation between upper limb
measurements (hand length, hand breadth, arm length and middle
finger length) and stature (p < 0.01), which was highest for hand
length. The accuracy of stature prediction ranged from ± 54.897 mm
to ± 58.307 mm. The use of multiple regression equations gave better
results than simple regression equations. This study provides new
forensic standards for stature estimation from the upper limb
measurements of male industrial workers of Haryana (India). The
results of this research indicate that stature can be determined using
hand dimensions with accuracy, when only upper limb is available
due to any reasons likewise explosions, train/plane crashes, mutilated
bodies, etc. The regression formula derived in this study will be
useful for anatomists, archaeologists, anthropologists, design
engineers and forensic scientists for fairly prediction of stature using
regression equations.
Abstract: These days customer satisfaction plays vital role in
any business. When customer searches for a product, significantly a
junk of irrelevant information is what is given, leading to customer
dissatisfaction. To provide exactly relevant information on the
searched product, we are proposing a model of KaaS (Knowledge as
a Service), which pre-processes the information using decision
making paradigm using Multi-agents.
Information obtained from various sources is taken to derive
knowledge and they are linked to Cloud to capture new idea. The
main focus of this work is to acquire relevant information
(knowledge) related to product, then convert this knowledge into a
service for customer satisfaction and deploy on cloud.
For achieving these objectives we are have opted to use multi
agents. They are communicating and interacting with each other,
manipulate information, provide knowledge, to take decisions. The
paper discusses about KaaS as an intelligent approach for Knowledge
acquisition.
Abstract: The main purpose of this paper is to determine the
applicability of the constitutional social rights in the so-called
horizontal relations, i.e. the relations between private entities.
Nowadays the constitutional rights are more and more often violated
by private entities and not only by the state. The private entities
interfere with the privacy of individuals, limit their freedom of
expression or disturb their peaceful gatherings. International
corporations subordinate individuals in a way which may limit their
constitutional rights. These new realities determine the new role of
the constitution in protecting human rights.
The paper will aim at answering two important questions. Firstly,
are the private entities obliged to respect the constitutional social
rights of other private entities and can they be liable for violation of
these rights? Secondly, how the constitutional social rights can
receive horizontal effect? Answers to these questions will have a
significant meaning for the popularisation of the practice of applying
the Constitution among the citizens as well as for the courts which
settle disputes between them.
Abstract: A three-dimensional numerical model of
thermoelectric generator (TEG) modules attached to a large chimney
plate is proposed and solved numerically using a control volume based
finite difference formulation. The TEG module consists of a
thermoelectric generator, an elliptical pin-fin heat sink, and a cold
plate for water cooling. In the chimney, the temperature of flue gases is
450-650K. Although the TEG hot-side temperature and thus the
electric power output can be increased by inserting an elliptical pin-fin
heat sink into the chimney tunnel to increase the heat transfer area, the
pin fin heat sink would cause extra pumping power at the same time.
The main purpose of this study is to analyze the effects of geometrical
parameters on the electric power output and chimney pressure drop
characteristics. The effects of different operating conditions, including
various inlet velocities (Vin= 1, 3, 5 m/s), inlet temperatures (Tgas = 450,
550, 650K) and different fin height (0 to 150 mm) are discussed in
detail. The predicted numerical data for the power vs. current (P-I)
curve are in good agreement (within 11%) with the experimental data.
Abstract: R.C.C. buildings with dual structural system
consisting of shear walls (or braces) and moment resisting frames
have been widely used to resist lateral forces during earthquakes. The
dual systems are designed to resist the total design lateral force in
proportion to their lateral stiffness. The response of combination of
braces and shear walls has not yet been studied. The combination
may prove to be more effective to resist lateral forces during
earthquakes. This concept has been applied to regular R.C.C.
buildings provided with shear walls, braces and their combinations.
Abstract: The aim of software maintenance is to maintain
the software system in accordance with advancement in software
and hardware technology. One of the early works on software
maintenance is to extract information at higher level of abstraction. In
this paper, we present the process of how to design an information
extraction tool for software maintenance. The tool can extract the
basic information from old programs such as about variables, based
classes, derived classes, objects of classes, and functions. The tool
have two main parts; the lexical analyzer module that can read the
input file character by character, and the searching module which
users can get the basic information from the existing programs. We
implemented this tool for a patterned sub-C++ language as an input
file.
Abstract: An artificial neural network is a mathematical model
inspired by biological neural networks. There are several kinds of
neural networks and they are widely used in many areas, such as:
prediction, detection, and classification. Meanwhile, in day to day life,
people always have to make many difficult decisions. For example,
the coach of a soccer club has to decide which offensive player
to be selected to play in a certain game. This work describes a
novel Neural Network using a combination of the General Regression
Neural Network and the Probabilistic Neural Networks to help a
soccer coach make an informed decision.
Abstract: Parabolic solar trough systems have seen limited
deployments in cold northern climates as they are more suitable for
electricity production in southern latitudes. A numerical dynamic
model is developed to simulate troughs installed in cold climates and
validated using a parabolic solar trough facility in Winnipeg. The
model is developed in Simulink and will be utilized to simulate a trigeneration
system for heating, cooling and electricity generation in
remote northern communities. The main objective of this simulation
is to obtain operational data of solar troughs in cold climates and use
the model to determine ways to improve the economics and address
cold weather issues.
In this paper the validated Simulink model is applied to simulate a
solar assisted absorption cooling system along with electricity
generation using Organic Rankine Cycle (ORC) and thermal storage.
A control strategy is employed to distribute the heated oil from solar
collectors among the above three systems considering the
temperature requirements. This modelling provides dynamic
performance results using measured meteorological data recorded
every minute at the solar facility location. The purpose of this
modeling approach is to accurately predict system performance at
each time step considering the solar radiation fluctuations due to
passing clouds. Optimization of the controller in cold temperatures is
another goal of the simulation to for example minimize heat losses in
winter when energy demand is high and solar resources are low.
The solar absorption cooling is modeled to use the generated heat
from the solar trough system and provide cooling in summer for a
greenhouse which is located next to the solar field.
The results of the simulation are presented for a summer day in
Winnipeg which includes comparison of performance parameters of
the absorption cooling and ORC systems at different heat transfer
fluid (HTF) temperatures.
Abstract: Dengue outbreaks are affected by biological,
ecological, socio-economic and demographic factors that vary over
time and space. These factors have been examined separately and still
require systematic clarification. The present study aimed to investigate
the spatial-temporal clustering relationships between these factors and
dengue outbreaks in the northern region of Sri Lanka. Remote sensing
(RS) data gathered from a plurality of satellites were used to develop
an index comprising rainfall, humidity and temperature data. RS data
gathered by ALOS/AVNIR-2 were used to detect urbanization, and a
digital land cover map was used to extract land cover information.
Other data on relevant factors and dengue outbreaks were collected
through institutions and extant databases. The analyzed RS data and
databases were integrated into geographic information systems,
enabling temporal analysis, spatial statistical analysis and space-time
clustering analysis. Our present results showed that increases in the
number of the combination of ecological factor and socio-economic
and demographic factors with above the average or the presence
contribute to significantly high rates of space-time dengue clusters.
Abstract: This study analyzes the innovative orientation of the
Croatian entrepreneurs. Innovative orientation is represented by the
perceived extent to which an entrepreneur’s product or service or
technology is new, and no other businesses offer the same product.
The sample is extracted from the GEM Croatia Adult Population
Survey dataset for the years 2003-2013. We apply descriptive
statistics, t-test, Chi-square test and logistic regression. Findings
indicate that innovative orientations vary with personal, firm, meso
and macro level variables, and between different stages in
entrepreneurship process. Significant predictors are occupation of the
entrepreneurs, size of the firm and export aspiration for both early
stage and established entrepreneurs. In addition, fear of failure,
expecting to start a new business and seeing an entrepreneurial career
as a desirable choice are predictors of innovative orientation among
early stage entrepreneurs.
Abstract: In this article we will study the elliptic curve defined
over the ring An and we define the mathematical operations of ECC,
which provides a high security and advantage for wireless
applications compared to other asymmetric key cryptosystem.
Abstract: The adaptation of social networking sites within
higher education has garnered significant interest in the recent years
with numerous researches considering it as a possible shift from the
traditional classroom based learning paradigm. Notwithstanding this
increase in research and conducted studies however, the adaption of
SNS based modules have failed to proliferate within Universities.
This paper commences its contribution by analyzing the various
models and theories proposed in literature and amalgamate together
various effective aspects for the inclusion of social technology within
e-Learning. A three phased framework is further proposed which
details the necessary considerations for the successful adaptation of
SNS in enhancing the students learning experience. This proposal
outlines the theoretical foundations which will be analyzed in
practical implementation across international university campuses.
Abstract: Wireless Sensor Networks (WSNs) have wide variety
of applications and provide limitless future potentials. Nodes in
WSNs are prone to failure due to energy depletion, hardware failure,
communication link errors, malicious attacks, and so on. Therefore,
fault tolerance is one of the critical issues in WSNs. We study how
fault tolerance is addressed in different applications of WSNs. Fault
tolerant routing is a critical task for sensor networks operating in
dynamic environments. Many routing, power management, and data
dissemination protocols have been specifically designed for WSNs
where energy awareness is an essential design issue. The focus,
however, has been given to the routing protocols which might differ
depending on the application and network architecture.