Abstract: Pulse width modulation (PWM) techniques have been
the subject of intensive research for different industrial and power
sector applications. A large variety of methods, different in concept
and performance, have been newly developed and described. This
paper analyzes the comparative merits of Sinusoidal Pulse Width
Modulation (SPWM) and Space Vector Pulse Width Modulation
(SVPWM) techniques and the suitability of these techniques in a
Shunt Active Filter (SAF). The objective is to select the scheme that
offers effective utilization of DC bus voltage and also harmonic
reduction at the input side. The effectiveness of the PWM techniques
is tested in the SAF configuration with a non linear load. The
performance of the SAF with the SPWM and (SVPWM) techniques
are compared with respect to the THD in source current. The study
reveals that in the context of closed loop SAF control with the
SVPWM technique there is only a minor improvement in THD. The
utilization of the DC bus with SVPWM is also not significant
compared to that with SPWM because of the non sinusoidal
modulating signal from the controller in SAF configuration.
Abstract: Sampling and analysis of leachate from Bhalaswa
landfill and groundwater samples from nearby locations, clearly
indicated the likely contamination of groundwater due to landfill
leachate. The results of simulation studies carried out for the
migration of Chloride from landfill shows that the simulation results
are in consonance with the observed concentration of Chloride in the
vicinity of landfill facility. The solid waste disposal system presently
being practiced in Delhi consists of mere dumping of wastes
generated, at three locations Bhalaswa, Ghazipur, and Okhla without
any regard to proper care for the protection of surrounding
environment. Bhalaswa landfill site in Delhi, which is being operated
as a dump site, is expected to become cause of serious groundwater
pollution in its vicinity. The leachate from Bhalaswa landfill was
found to be having a high concentration of chlorides, as well as DOC,
COD. The present study was undertaken to determine the likely
concentrations of principle contaminants in the groundwater over a
period of time due to the discharge of such contaminants from
landfill leachates to the underlying groundwater. The observed
concentration of chlorides in the groundwater within 75m of the
radius of landfill facility was found to be in consonance with the
simulated concentration of chloride in groundwater considering one
dimensional transport model, with finite mass of contaminant source.
Governing equation of contaminant transport involving advection and
diffusion-dispersion was solved in matlab7.0 using finite difference
method.
Abstract: An increasingly dynamic and complex environment poses huge challenges to production enterprises, especially with regards to logistics. The Logistic Operating Curve Theory, developed at the Institute of Production Systems and Logistics (IFA) of the Leibniz University of Hanover, is a recognized approach to describing logistic interactions, nevertheless, it reaches its limits when it comes to the dynamic aspects. In order to facilitate a timely and optimal Logistic Positioning a method is developed for quickly and reliably identifying dynamic processing states.
Abstract: A new chelating resin is prepared by coupling
Amberlite XAD-4 with 1-amino-2-naphthole through an azo spacer.
The resulting sorbent has been characterized by FT-IR, elemental
analysis and thermogravimetric analysis (TGA) and studied for
preconcentrating of Cu (II) using flame atomic absorption
spectrometry (FAAS) for metal monitoring. The optimum pH value
for sorption of the copper ions was 6.5. The resin was subjected to
evaluation through batch binding of mentioned metal ion.
Quantitative desorption occurs instantaneously with 0.5 M HNO3.
The sorption capacity was found 4.8 mmol.g-1 of resin for Cu (II) in
the aqueous solution. The chelating resin can be reused for 10 cycles
of sorption-desorption without any significant change in sorption
capacity. A recovery of 99% was obtained the metal ions with 0.5 M
HNO3 as eluting agent. The method was applied for metal ions
determination from industrial waste water sample.
Abstract: This paper introduces a technique for simulating a
single-server exponential queuing system. The technique called the
Q-Simulator is a computer program which can simulate the effect of
traffic intensity on all system average quantities given the arrival
and/or service rates. The Q-Simulator has three phases namely: the
formula based method, the uncontrolled simulation, and the
controlled simulation. The Q-Simulator generates graphs (crystal
solutions) for all results of the simulation or calculation and can be
used to estimate desirable average quantities such as waiting times,
queue lengths, etc.
Abstract: Martingale model diagnostic for assessing the fit of logistic regression model to recurrent events data are studied. One way of assessing the fit is by plotting the empirical standard deviation of the standardized martingale residual processes. Here we used another diagnostic plot based on martingale residual covariance. We investigated the plot performance under several types of model misspecification. Clearly the method has correctly picked up the wrong model. Also we present a test statistic that supplement the inspection of the two diagnostic. The test statistic power agrees with what we have seen in the plots of the estimated martingale covariance.
Abstract: In order to enhance the knowledge of certain
phytochemical Algerian plants that are widely used in traditional
medicine and to exploit their therapeutic potential in modern
medicine, we have done a specific extraction of terpenes and
alkaloids from the leaves of Euphorbia granulata to evaluate the
antioxidant and antibacterial activity of this extracts. After the
extraction it was found that the terpene extract gave the highest yield
59.72% compared with alkaloids extracts.
The disc diffusion method was used to determine the antibacterial
activity against different bacterial strains: Escherichia coli
(ATCC25922), Pseudomonas aeruginosa (ATCC27853) and
Staphylococcus aureus (ATCC25923). All extracts have shown
inhibition of growth bacteria. The different zones of inhibition have
varied from (7 -10 mm) according to the concentrations of extract
used.
Testing the antiradical activity on DPPH-TLC plates indicated the
presence of substances that have potent anti-free radical. As against,
the BC-TLC revealed that only terpenes extract which was reacted
positively. These results can validate the importance of Euphorbia
granulata in traditional medicine.
Abstract: Analyses carried out on examples of detected defects
echoes showed clearly that one can describe these detected forms according to a whole of characteristic parameters in order to be able to make discrimination between a planar defect and a volumic defect.
This work answers to a problem of ultrasonics NDT like Identification of the defects. The problems as well as the objective of
this realized work, are divided in three parts: Extractions of the parameters of wavelets from the ultrasonic echo of the detected defect - the second part is devoted to principal components analysis
(PCA) for optimization of the attributes vector. And finally to establish the algorithm of classification (SVM, Support Vector Machine) which allows discrimination between a plane defect and a
volumic defect. We have completed this work by a conclusion where we draw up a summary of the completed works, as well as the robustness of the
various algorithms proposed in this study.
Abstract: This study applied the Theory of Planned Behavior
model in predicting dietary behavior among Type 2 diabetics in a
Kenyan environment. The study was conducted for three months
within the diabetic clinic at Kisii Hospital in Nyanza Province in
Kenya and adopted sequential mixed methods design combing both
qualitative and quantitative phases. Qualitative data was analyzed
using grounded theory analysis method. Structural equation modeling
using maximum likelihood was used to analyze quantitative data.
The results based on the common fit indices revealed that the theory
of planned behavior fitted the data acceptably well among the Type 2
diabetes and within dietary behavior {χ2 = 223.3, df = 77, p = .02,
χ2/df = 2.9, n=237; TLI = .93; CFI =.91; RMSEA (90CI) = .090(.039,
.146)}. This implies that the Theory of Planned Behavior holds and
forms a framework for promoting dietary practice among Type 2
diabetics.
Abstract: Though nonlinear dynamic analysis using a specialized
hydro-code such as AUTODYN is accurate and useful tool for
progressive collapse assessment of a multi-story building subjected to
blast load, it takes too much time to be applied to a practical simulation
of progressive collapse of a tall building. In this paper, blast analysis of
a RC frame structure using a simplified model with Reinforcement
Contact technique provided in Ansys Workbench was introduced and
investigated on its accuracy. Even though the simplified model has a
fraction of elements of the detailed model, the simplified model with
this modeling technique shows similar structural behavior under the
blast load to the detailed model. The proposed modeling method can
be effectively applied to blast loading progressive collapse analysis of
a RC frame structure.
Abstract: Electrophysiological signals were recorded from primary cultures of dissociated rat cortical neurons coupled to Micro-Electrode Arrays (MEAs). The neuronal discharge patterns may change under varying physiological and pathological conditions. For this reason, we developed a new burst detection method able to identify bursts with peculiar features in different experimental conditions (i.e. spontaneous activity and under the effect of specific drugs). The main feature of our algorithm (i.e. Burst On Hurst), based on the auto-similarity or fractal property of the recorded signal, is the independence from the chosen spike detection method since it works directly on the raw data.
Abstract: The free and forced in-plane vibrations of axially
moving plates are investigated in this work. The plate possesses an
internal damping of which the constitutive relation obeys the
Kelvin-Voigt model, and the excitations are arbitrarily distributed on
two opposite edges. First, the equations of motion and the boundary
conditions of the axially moving plate are derived. Then, the extended
Ritz method is used to obtain discretized system equations. Finally,
numerical results for the natural frequencies and the mode shapes of
the in-plane vibration and the in-plane response of the moving plate
subjected to arbitrary edge excitations are presented. It is observed that
the symmetry class of the mode shapes of the in-plane vibration
disperses gradually as the moving speed gets higher, and the u- and
v-components of the mode shapes belong to different symmetry class.
In addition, large response amplitudes having shapes similar to the
mode shapes of the plate can be excited by the edge excitations at the
resonant frequencies and with the same symmetry class of distribution
as the u-components.
Abstract: In this paper, we propose a novel approach for image
segmentation via fuzzification of Rènyi Entropy of Generalized
Distributions (REGD). The fuzzy REGD is used to precisely measure
the structural information of image and to locate the optimal
threshold desired by segmentation. The proposed approach draws
upon the postulation that the optimal threshold concurs with
maximum information content of the distribution. The contributions
in the paper are as follow: Initially, the fuzzy REGD as a measure of
the spatial structure of image is introduced. Then, we propose an
efficient entropic segmentation approach using fuzzy REGD.
However the proposed approach belongs to entropic segmentation
approaches (i.e. these approaches are commonly applied to grayscale
images), it is adapted to be viable for segmenting color images.
Lastly, diverse experiments on real images that show the superior
performance of the proposed method are carried out.
Abstract: Many supervised induction algorithms require discrete
data, even while real data often comes in a discrete
and continuous formats. Quality discretization of continuous
attributes is an important problem that has effects on speed,
accuracy and understandability of the induction models. Usually,
discretization and other types of statistical processes are applied
to subsets of the population as the entire population is practically
inaccessible. For this reason we argue that the discretization
performed on a sample of the population is only an estimate of
the entire population. Most of the existing discretization methods,
partition the attribute range into two or several intervals using
a single or a set of cut points. In this paper, we introduce a
technique by using resampling (such as bootstrap) to generate
a set of candidate discretization points and thus, improving the
discretization quality by providing a better estimation towards
the entire population. Thus, the goal of this paper is to observe
whether the resampling technique can lead to better discretization
points, which opens up a new paradigm to construction of
soft decision trees.
Abstract: The medical studies often require different methods
for parameters selection, as a second step of processing, after the
database-s designing and filling with information. One common
task is the selection of fields that act as risk factors using wellknown
methods, in order to find the most relevant risk factors and
to establish a possible hierarchy between them. Different methods
are available in this purpose, one of the most known being the
binary logistic regression. We will present the mathematical
principles of this method and a practical example of using it in the
analysis of the influence of 10 different psychiatric diagnostics
over 4 different types of offences (in a database made from 289
psychiatric patients involved in different types of offences).
Finally, we will make some observations about the relation
between the risk factors hierarchy established through binary
logistic regression and the individual risks, as well as the results of
Chi-squared test. We will show that the hierarchy built using the
binary logistic regression doesn-t agree with the direct order of risk
factors, even if it was naturally to assume this hypothesis as being
always true.
Abstract: Class cohesion is an important object-oriented
software quality attribute. It indicates how much the members in a
class are related. Assessing the class cohesion and improving the
class quality accordingly during the object-oriented design phase
allows for cheaper management of the later phases. In this paper, the
notion of distance between pairs of methods and pairs of attribute
types in a class is introduced and used as a basis for introducing a
novel class cohesion metric. The metric considers the methodmethod,
attribute-attribute, and attribute-method direct interactions.
It is shown that the metric gives more sensitive values than other
well-known design-based class cohesion metrics.
Abstract: The Chiu-s method which generates a Takagi-Sugeno Fuzzy Inference System (FIS) is a method of fuzzy rules extraction. The rules output is a linear function of inputs. In addition, these rules are not explicit for the expert. In this paper, we develop a method which generates Mamdani FIS, where the rules output is fuzzy. The method proceeds in two steps: first, it uses the subtractive clustering principle to estimate both the number of clusters and the initial locations of a cluster centers. Each obtained cluster corresponds to a Mamdani fuzzy rule. Then, it optimizes the fuzzy model parameters by applying a genetic algorithm. This method is illustrated on a traffic network management application. We suggest also a Mamdani fuzzy rules generation method, where the expert wants to classify the output variables in some fuzzy predefined classes.
Abstract: This article is based on the technique which is called
Discrete Parameter Tracking (DPT). First introduced by A. A. Azab
[8] which is applicable for less order reference model. The order of
the reference model is (n-l) and n is the number of the adjustable
parameters in the physical plant.
The technique utilizes a modified gradient method [9] where the
knowledge of the exact order of the nonadaptive system is not
required, so, as to eliminate the identification problem. The
applicability of the mentioned technique (DPT) was examined
through the solution of several problems.
This article introduces the solution of a third order system with
three adjustable parameters, controlled according to second order
reference model. The adjustable parameters have great initial error
which represent condition.
Computer simulations for the solution and analysis are provided
to demonstrate the simplicity and feasibility of the technique.
Abstract: This paper describes the two stage control using a disturbance observer and a Kalman filter. The system feedback uses the estimated state when it controls the speed. After the change-over point, its feedback uses the controlled plant output when it controls the position. To change the system continually, a change-over point has to be determined pertinently, and the controlled plant input has to be adjusted by the addition of the appropriate value. The proposed method has noise-reduction effect. It changes the system continually, even if the controlled plant identification has the error. Although the conventional method needs a speed sensor, the proposed method does not need it. The proposed method has a superior robustness compared with the conventional two stage control.
Abstract: This paper presents the H-ARQ techniques comparison for OFDM systems with a new family of non-binary LDPC codes which has been developed within the EU FP7 DAVINCI project. The punctured NB-LDPC codes have been used in a simulated model of the transmission system. The link level performance has been evaluated in terms of spectral efficiency, codeword error rate and average number of retransmissions. The NB-LDPC codes can be easily and effective implemented with different methods of the retransmission needed if correct decoding of a codeword failed. Here the Optimal Symbol Selection method is proposed as a Chase Combining technique.