Abstract: According to Rostler method (ASTM D 2006), saturates content of bitumen is determined based on its reactivity to sulphuric acid. While Corbett method (ASTM D 4124) based on its polarity level. This paper presents results from the study on the effect of saturates content determined by two different fractionation methods on the rheological and aging characteristics of bitumen. The result indicated that the increment of saturates content tended to reduce all the rheological characteristics concerned. Bitumen became less elastic, less viscous, and less resistant to plastic deformation, but became more resistant to fatigue cracking. After short and long term aging process, the treatment effect coefficients of saturates decreased, saturates became thicker due to aging process. This study concludes that saturates is not really stable or reactive in aging process. Therefore, the reactivity of saturates should be considered in bitumen aging index
Abstract: This paper presents a new approach in the identification of the quadrotor dynamic model using a black-box system for identification. Also the paper considers the problems which appear during the identification in the closed-loop and offers a technical solution for overcoming the correlation between the input noise present in the output
Abstract: Islamic institutions in Malaysia play a variety of
socioeconomic roles such as poverty alleviation. To perform this role,
these institutions face a major task in identifying the poverty group.
Most of these institutions measure and operationalize poverty from
the monetary perspective using variables such as income, expenditure
or consumption. In practice, most Islamic institutions in Malaysia use
the monetary approach in measuring poverty through the
conventional Poverty Line Income (PLI) method and recently, the
had al kifayah (HAK) method using total necessities of a household
from an Islamic perspective. The objective of this paper is to present
the PLI and also the HAK method. This micro-data study would
highlight the similarities and differences of both the methods.A
survey aided by a structured questionnaire was carried out on 260
selected head of households in the state of Selangor. The paper
highlights several demographic factors that are associated with the
three monetary indicators in the study, namely income, PLI and
HAK. In addition, the study found that these monetary variables are
significantly related with each other.
Abstract: Magnesium wastes are produced by many industrial activities. This waste problem is becoming a future problem for the world. Magnesium borates have many advantages such as; high corrosion resistance, heat resistance, high coefficient of elasticity and can also be used in the production of material against radiation. Addition, magnesium borates have great potential in sectors
including ceramic and detergents industry and superconducting materials.
In this study, using the starting materials of waste magnesium and H3BO3 the hydrothermal method was applied at a moderate
temperature of 70oC. Several mole ratios of waste magnesium to H3BO3 are selected as; 1:2, 1:4, 1:6, 1:8, 1:10. Reaction time was determined as 1 hour. After the synthesis, X-Ray Diffraction (XRD) and Fourier Transform Infrared Spectroscopy (FT-IR) techniques are applied to products. As a result the forms of mcallisterite “Mg2(B6O7(OH)6)2.9(H2O)”, admontite “MgO(B2O3)3.7(H2O)” and magnesium boron hydrate (MgO(B2O3)3.6(H2O)” are obtained.
Abstract: Many problems in computer vision and image
processing present potential for parallel implementations through one
of the three major paradigms of geometric parallelism, algorithmic
parallelism and processor farming. Static process scheduling
techniques are used successfully to exploit geometric and algorithmic
parallelism, while dynamic process scheduling is better suited to
dealing with the independent processes inherent in the process
farming paradigm. This paper considers the application of parallel or
multi-computers to a class of problems exhibiting spatial data
characteristic of the geometric paradigm. However, by using
processor farming paradigm, a dynamic scheduling technique is
developed to suit the MIMD structure of the multi-computers. A
hybrid scheme of scheduling is also developed and compared with
the other schemes. The specific problem chosen for the investigation
is the Hough transform for line detection.
Abstract: In this study, a comparison of two control methods,
Proportional Control (PC) and Fuzzy Logic Control (FLC), which
have been used to develop an ideal thermoelectric renal hypothermia
system in order to use in renal surgery, has been carried out. Since
the most important issues in long-lasting parenchymatous renal
surgery are to provide an operation medium free of blood and to
prevent renal dysfunction in the postoperative period, control of the
temperature has become very important in renal surgery. The final
product is seriously affected from the changes in temperature,
therefore, it is necessary to reach some desired temperature points
quickly and avoid large overshoot. PIC16F877 microcontroller has
been used as controller for both of these two methods. Each control
method can simply ensure extra renal hypothermia in the targeted
way. But investigation of advantages and disadvantages of every
control method to each other is aimed and carried out by the
experimental implementations. Shortly, investigation of the most
appropriate method to use for development of system and that can be
applied to people safely in the future, has been performed. In this
sense, experimental results show that fuzzy logic control gives out
more reliable responses and efficient performance.
Abstract: In data mining, the association rules are used to search
for the relations of items of the transactions database. Following the
data is collected and stored, it can find rules of value through
association rules, and assist manager to proceed marketing strategy
and plan market framework. In this paper, we attempt fuzzy partition
methods and decide membership function of quantitative values of
each transaction item. Also, by managers we can reflect the
importance of items as linguistic terms, which are transformed as
fuzzy sets of weights. Next, fuzzy weighted frequent pattern growth
(FWFP-Growth) is used to complete the process of data mining. The
method above is expected to improve Apriori algorithm for its better
efficiency of the whole association rules. An example is given to
clearly illustrate the proposed approach.
Abstract: The characterization and modeling of the dynamic
behavior of many built-up structures under vibration conditions is still
a subject of current research. The present study emphasizes the
theoretical investigation of slip damping in layered and jointed
welded cantilever structures using finite element approach.
Application of finite element method in damping analysis is relatively
recent, as such, some problems particularly slip damping analysis has
not received enough attention. To validate the finite element model
developed, experiments have been conducted on a number of mild
steel specimens under different initial conditions of vibration. Finite
element model developed affirms that the damping capacity of such
structures is influenced by a number of vital parameters such as;
pressure distribution, kinematic coefficient of friction and micro-slip
at the interfaces, amplitude, frequency of vibration, length and
thickness of the specimen. Finite element model developed can be
utilized effectively in the design of machine tools, automobiles,
aerodynamic and space structures, frames and machine members for
enhancing their damping capacity.
Abstract: In this paper, some experiments of liquid dispersion flow driven by explosion in vertical plane were carried out using a liquid explosive dispersion device with film cylindrical constraints. The separated time series describing the breakup shape and dispersion process of liquid were recorded with high speed CMOS camera. The experimental results were analyzed and some essential characteristics of liquid dispersing flow are presented.
Abstract: Addition of an oily waste to a co-composting process of dairy cow manure with food waste, and the influence in the final product was evaluated. Three static composting piles with different substrates concentrations were assessed. Sawdust was also added to all composting piles to attain 60%, humidity at the beginning of the process. In pile 1, the co-substrates were the solid-phase of dairy cow manure, food waste and sawdust as bulking agent. In piles 2 and 3 there was an extra input of oily waste of 7 and 11% of the total volume, respectively, corresponding to 18 and 28% in dry weight. The results showed that the co-composting process was feasible even at the highest fat content. Another positive effect due to the oily waste addition was the requirement of extra humidity, due to the hydrophobic properties of this specific waste, which may imply reduced need of a bulking agent. Moreover, this study shows that composting can be a feasible way of adding value to fatty wastes. The three final composts presented very similar and suitable properties for land application.
Abstract: This qualitative, quantitative mixed-method study explores how students- motivation and interest in creative hands-on activities affected their conceptual understanding of science. The objectives of this research include developing a greater understanding about how creative activities, incorporated into the classroom as instructional strategies, increase student motivation and their learning or mastery of science concepts. The creative activities are viewed as a motivational tool, a specific type of task, which have an impact on student goals. Pre-and-post tests, pre-and-post interviews, and student responses measure motivational-goal theory variables, interest in the activity, and conceptual change. Implications for education and future research will be discussed.
Abstract: In this work, new experimental data for slugging
frequency in inclined gas-liquid flow are reported, and a new
correlation is proposed. Scale experiments were carried out using a
mixture of air and water in a 6 m long pipe. Two different pipe
diameters were used, namely, 38 and 67 mm. The data were taken
with capacitance type sensors at a data acquisition frequency of 200
Hz over an interval of 60 seconds. For the range of flow conditions
studied, the liquid superficial velocity is observed to influence the
frequency strongly. A comparison of the present data with
correlations available in the literature reveals a lack of agreement. A
new correlation for slug frequency has been proposed for the inclined
flow, which represents the main contribution of this work.
Abstract: Cattle manure and mineral fertilizers are two source
of Nitrogen, which can affect the growth and quantity of potato. In
this research the effects of the use of cattle manure (5, 10, 15 and 20
ton ha-1), Nitrogen fertilizer (50, 100 and 150 kg N ha-1) and their
interaction on potato growth were evaluated during field
experiments in 2008 with the help of Randomized Complete Block
(RCB) with the factorial arrangement of three experimental
replications in Iran. At the 75 th day after emergence, dry weight of
Shoots, leaf area index (LAI) and plant height were recorded. Results
showed that, dry weight of Shoots, LAI and plant height increased
linearly and very significantly in response to the application of
manure and Nitrogen fertilizer. While the interaction between
manure and Nitrogen fertilizer just on the LAI and plant height was
significant, somehow the maximum amount of plant height( 73 cm)
was obtained by using 150 kg Nitrogen + 15 tons of manure per
hectare, and maximum LAI ( 5.36) was obtained by using 150 kg
Nitrogen + 20 tons of manure per hectare. Also in this experiment
maximum tuber yield (36.8 tons ha-1) was obtained by the utilization
of 150 kg Nitrogen per hectare + 20 tons manure.
Abstract: HIV-1 genome is highly heterogeneous. Due to this
variation, features of HIV-I genome is in a wide range. For this
reason, the ability to infection of the virus changes depending on
different chemokine receptors. From this point of view, R5 HIV
viruses use CCR5 coreceptor while X4 viruses use CXCR5 and
R5X4 viruses can utilize both coreceptors. Recently, in
Bioinformatics, R5X4 viruses have been studied to classify by using
the experiments on HIV-1 genome.
In this study, R5X4 type of HIV viruses were classified using
Auto Regressive (AR) model through Artificial Neural Networks
(ANNs). The statistical data of R5X4, R5 and X4 viruses was
analyzed by using signal processing methods and ANNs. Accessible
residues of these virus sequences were obtained and modeled by AR
model since the dimension of residues is large and different from
each other. Finally the pre-processed data was used to evolve various
ANN structures for determining R5X4 viruses. Furthermore ROC
analysis was applied to ANNs to show their real performances. The
results indicate that R5X4 viruses successfully classified with high
sensitivity and specificity values training and testing ROC analysis
for RBF, which gives the best performance among ANN structures.
Abstract: Recently, the Spherical Motion Models (SMM-s) have been introduced [1]. These new models have been developed for 3D local landmark-base Autonomous Navigation (AN). This paper is revealing new arguments and experimental results to support the SMM-s characteristics. The accuracy and the robustness in performing a specific task are the main concerns of the new investigations. To analyze their performances of the SMM-s, the most powerful tools of estimation theory, the extended Kalman filter (EKF) and unscented Kalman filter (UKF), which give the best estimations in noisy environments, have been employed. The Monte Carlo validation implementations used to test the stability and robustness of the models have been employed as well.
Abstract: Urban planning, in particular on protected landscape
areas, demands an increasing role of public participation within the
frame of the efficiency of sustainable planning process. The
development of urban planning actions in Protected Landscape areas,
as Sintra-Cascais Natural Park, should perform a methodological
process that is structured over distinct sequential stages, providing
the development of a continuous, interactive, integrated and
participative planning. From the start of Malveira da Serra and Janes
Plan process, several public participation actions were promoted, in
order to involve the local agents, stakeholders and the population in
the decision of specific local key issues and define the appropriate
priorities within the goals and strategies previously settled. As a
result, public participation encouraged an innovative process that
guarantees the efficiency of sustainable urban planning and promotes
a sustainable new way of living in community.
Abstract: PROFIBUS (PROcess FIeld BUS) which is defined with international standarts (IEC61158, EN50170) is the most popular fieldbus, and provides a communication between industrial applications which are located in different control environment and location in manufacturing, process and building automation. Its communication speed is from 9.6 Kbps to 12 Mbps over distances from 100 to 1200 meters, and so it is to be often necessary to interconnect them in order to break these limits. Unfortunately this interconnection raises several issues and the solutions found so far are not very satisfactory. In this paper, we propose a new solution to interconnect PROFIBUS segments, which uses a wireless MAN based on the IEEE 802.16 standard as a backbone system. Also, the solution which is described a model for internetworking unit integrates the traffic generated by PROFIBUS segments into IEEE 802.16 wireless MAN using encapsulation technique.
Abstract: Because road traffic accidents are a major source of death worldwide, attempts have been made to create Advanced Driver Assistance Systems (ADAS) able to detect vehicle, driver and
environmental conditions that are cues for possible potential accidents. This paper presents continued work on a novel Nonintrusive
Intelligent Driver Assistance and Safety System (Ni-DASS)
for assessing driver attention and hazard awareness. It uses two onboard
CCD cameras – one observing the road and the other observing
the driver-s face. The windscreen is divided into cells and analysis of
the driver-s eye-gaze patterns allows Ni-DASS to determine the windscreen cell the driver is focusing on using eye-gesture templates.
Intersecting the driver-s field of view through the observed
windscreen cell with subsections of the camera-s field of view containing a potential hazard allows Ni-DASS to estimate the
probability that the driver has actually observed the hazard. Results
have shown that the proposed technique is an accurate enough
measure of driver observation to be useful in ADAS systems.
Abstract: Computational techniques derived from digital image processing are playing a significant role in the security and digital copyrights of multimedia and visual arts. This technology has the effect within the domain of computers. This research presents discrete M-band wavelet transform (MWT) and cosine transform (DCT) based watermarking algorithm by incorporating the principal component analysis (PCA). The proposed algorithm is expected to achieve higher perceptual transparency. Specifically, the developed watermarking scheme can successfully resist common signal processing, such as geometric distortions, and Gaussian noise. In addition, the proposed algorithm can be parameterized, thus resulting in more security. To meet these requirements, the image is transformed by a combination of MWT & DCT. In order to improve the security further, we randomize the watermark image to create three code books. During the watermark embedding, PCA is applied to the coefficients in approximation sub-band. Finally, first few component bands represent an excellent domain for inserting the watermark.
Abstract: The purpose of this work was to inspect the potential
of vincristine-dextran complex loaded solid lipid nanoparticles for
drug delivery to the brain.
The nanoparticles were stained with a fluorescence dye and their
plasma pharmacokinetic and brain concentrations were investigated
following injection to rats.
The result revealed a significant improvement in the plasma
concentration profile of the SLN injected animals as well as a sharp
increased concentration in the brains.