Abstract: This paper describes a new algorithm of arrangement
in parallel, based on Odd-Even Mergesort, called division and
concurrent mixes. The main idea of the algorithm is to achieve that
each processor uses a sequential algorithm for ordering a part of the
vector, and after that, for making the processors work in pairs in
order to mix two of these sections ordered in a greater one, also
ordered; after several iterations, the vector will be completely
ordered. The paper describes the implementation of the new
algorithm on a Message Passing environment (such as MPI). Besides,
it compares the obtained experimental results with the quicksort
sequential algorithm and with the parallel implementations (also on
MPI) of the algorithms quicksort and bitonic sort. The comparison
has been realized in an 8 processors cluster under GNU/Linux which
is running on a unique PC processor.
Abstract: This paper presents a new and efficient approach for
capacitor placement in radial distribution systems that determine
the optimal locations and size of capacitor with an objective of
improving the voltage profile and reduction of power loss. The
solution methodology has two parts: in part one the loss sensitivity
factors are used to select the candidate locations for the capacitor
placement and in part two a new algorithm that employs Plant growth
Simulation Algorithm (PGSA) is used to estimate the optimal size
of capacitors at the optimal buses determined in part one. The main
advantage of the proposed method is that it does not require any
external control parameters. The other advantage is that it handles the
objective function and the constraints separately, avoiding the trouble
to determine the barrier factors. The proposed method is applied to 9
and 34 bus radial distribution systems. The solutions obtained by the
proposed method are compared with other methods. The proposed
method has outperformed the other methods in terms of the quality
of solution.
Abstract: Low power consumption is a major constraint for battery-powered system like computer notebook or PDA. In the past, specialists usually designed both specific optimized equipments and codes to relief this concern. Doing like this could work for quite a long time, however, in this era, there is another significant restraint, the time to market. To be able to serve along the power constraint while can launch products in shorter production period, objectoriented programming (OOP) has stepped in to this field. Though everyone knows that OOP has quite much more overhead than assembly and procedural languages, development trend still heads to this new world, which contradicts with the target of low power consumption. Most of the prior power related software researches reported that OOP consumed much resource, however, as industry had to accept it due to business reasons, up to now, no papers yet had mentioned about how to choose the best OOP practice in this power limited boundary. This article is the pioneer that tries to specify and propose the optimized strategy in writing OOP software under energy concerned environment, based on quantitative real results. The language chosen for studying is C# based on .NET Framework 2.0 which is one of the trendy OOP development environments. The recommendation gotten from this research would be a good roadmap that can help developers in coding that well balances between time to market and time of battery.
Abstract: In order to encourage the construction of green homes
(GH) in Malaysia, a simple and attainable framework for designing
and building GHs is needed. This can be achieved by aligning GH
principles against Cole-s 'Sustainable Building Criteria' (SBC). This
set of considerations was used to categorize the GH features of three
case studies from Malaysia. Although the categorization of building
features is useful at exploring the presence of sustainability
inclinations of each house, the overall impact of building features in
each of the five SBCs are unknown. Therefore, this paper explored
the possibility of quantifying the impact of building features
categorized in SBC1 – “Buildings will have to adapt to the new
environment and restore damaged ecology while mitigating resource
use" based on existing GH assessment tools and methods and other
literature. This process as reported in this paper could lead to a new
dimension in green home rating and assessment methods.
Abstract: Restoration of endodontically treated teeth is a
common problem in dentistry, related to the fractures occurring in
such teeth and to concentration of forces little information regarding
variation of basic preparation guidelines in stress distribution has
been available. To date, there is still no agreement in the literature
about which material or technique can optimally restore
endodontically treated teeth. The aim of the present study was to
evaluate the influence of the core height and restoration materials on
corono-radicular restored upper first premolar. The first step of the
study was to achieve 3D models in order to analyze teeth, dowel and
core restorations and overlying full ceramic crowns. The FEM model
was obtained by importing the solid model into ANSYS finite
element analysis software. An occlusal load of 100 N was conducted,
and stresses occurring in the restorations, and teeth structures were
calculated. Numerical simulations provide a biomechanical
explanation for stress distribution in prosthetic restored teeth. Within
the limitations of the present study, it was found that the core height
has no important influence on the stress generated in coronoradicular
restored premolars. It can be drawn that the cervical regions
of the teeth and restorations were subjected to the highest stress
concentrations.
Abstract: Waiting times and queues are a daily problem for theme parks. Fast lines or priority queues appear as a solution for a specific segment of customers, that is, tourists who are willing to pay to avoid waiting. This paper analyzes the fast line system and explores the factors that affect the decision to purchase a fast line pass. A greater understanding of these factors may help companies to design appropriate products and services. This conceptual paper was based on a literature review in marketing and consumer behavior. Additional research was identified in related disciplines such as leisure studies, psychology, and sociology. A conceptual framework of the factors influencing the decision to purchase a fast line pass is presented.
Abstract: We decribe a formal specification and verification of the Rabin public-key scheme in the formal proof system Is-abelle/HOL. The idea is to use the two views of cryptographic verification: the computational approach relying on the vocabulary of probability theory and complexity theory and the formal approach based on ideas and techniques from logic and programming languages. The analysis presented uses a given database to prove formal properties of our implemented functions with computer support. Thema in task in designing a practical formalization of correctness as well as security properties is to cope with the complexity of cryptographic proving. We reduce this complexity by exploring a light-weight formalization that enables both appropriate formal definitions as well as eficient formal proofs. This yields the first computer-proved implementation of the Rabin public-key scheme in Isabelle/HOL. Consequently, we get reliable proofs with a minimal error rate augmenting the used database. This provides a formal basis for more computer proof constructions in this area.
Abstract: Diagnostic and detection of the arterial stiffness is
very important; which gives indication of the associated increased risk of cardiovascular diseases. To make a cheap and easy method for general screening technique to avoid the future cardiovascular
complexes , due to the rising of the arterial stiffness ; a proposed algorithm depending on photoplethysmogram to be used. The
photoplethysmograph signals would be processed in MATLAB. The
signal will be filtered, baseline wandering removed, peaks and
valleys detected and normalization of the signals should be achieved
.The area under the catacrotic phase of the photoplethysmogram
pulse curve is calculated using trapezoidal algorithm ; then will used
in cooperation with other parameters such as age, height, blood
pressure in neural network for arterial stiffness detection. The Neural
network were implemented with sensitivity of 80%, accuracy 85%
and specificity of 90% were got from the patients data. It is
concluded that neural network can detect the arterial STIFFNESS
depending on risk factor parameters.
Abstract: The myoelectric signal (MES) is one of the Biosignals
utilized in helping humans to control equipments. Recent approaches
in MES classification to control prosthetic devices employing pattern
recognition techniques revealed two problems, first, the classification
performance of the system starts degrading when the number of
motion classes to be classified increases, second, in order to solve the
first problem, additional complicated methods were utilized which
increase the computational cost of a multifunction myoelectric
control system. In an effort to solve these problems and to achieve a
feasible design for real time implementation with high overall
accuracy, this paper presents a new method for feature extraction in
MES recognition systems. The method works by extracting features
using Wavelet Packet Transform (WPT) applied on the MES from
multiple channels, and then employs Fuzzy c-means (FCM)
algorithm to generate a measure that judges on features suitability for
classification. Finally, Principle Component Analysis (PCA) is
utilized to reduce the size of the data before computing the
classification accuracy with a multilayer perceptron neural network.
The proposed system produces powerful classification results (99%
accuracy) by using only a small portion of the original feature set.
Abstract: Identifying parameters in an epidemic model is one
of the important aspect of modeling. In this paper, we suggest a
method to identify the transmission rate by using the multistage
Adomian decomposition method. As a case study, we use the data of
the reported dengue fever cases in the city of Shah Alam, Malaysia.
The result obtained fairly represents the actual situation. However, in
the SIR model, this method serves as an alternative in parameter
identification and enables us to make necessary analysis for a smaller
interval.
Abstract: In this paper, the estimation of the stress-strength
parameter R = P(Y < X), when X and Y are independent and both
are Lomax distributions with the common scale parameters but
different shape parameters is studied. The maximum likelihood
estimator of R is derived. Assuming that the common scale parameter
is known, the bayes estimator and exact confidence interval of R are
discussed. Simulation study to investigate performance of the
different proposed methods has been carried out.
Abstract: This paper presents Qmulus- a Cloud Based GPS
Model. Qmulus is designed to compute the best possible route which
would lead the driver to the specified destination in the shortest time
while taking into account real-time constraints. Intelligence
incorporated to Qmulus-s design makes it capable of generating and
assigning priorities to a list of optimal routes through customizable
dynamic updates. The goal of this design is to minimize travel and
cost overheads, maintain reliability and consistency, and implement
scalability and flexibility. The model proposed focuses on
reducing the bridge between a Client Application and a Cloud
service so as to render seamless operations. Qmulus-s system
model is closely integrated and its concept has the potential to be
extended into several other integrated applications making it capable
of adapting to different media and resources.
Abstract: In this paper we are to find the optimum
multiwavelet for compression of electrocardiogram (ECG)
signals. At present, it is not well known which multiwavelet is
the best choice for optimum compression of ECG. In this
work, we examine different multiwavelets on 24 sets of ECG
data with entirely different characteristics, selected from MITBIH
database. For assessing the functionality of the different
multiwavelets in compressing ECG signals, in addition to
known factors such as Compression Ratio (CR), Percent Root
Difference (PRD), Distortion (D), Root Mean Square Error
(RMSE) in compression literature, we also employed the
Cross Correlation (CC) criterion for studying the
morphological relations between the reconstructed and the
original ECG signal and Signal to reconstruction Noise Ratio
(SNR). The simulation results show that the cardbal2 by the
means of identity (Id) prefiltering method to be the best
effective transformation.
Abstract: Cooperative visual modeling is more and more
necessary in our complicated world. A collaborative environment
which supports interactive operation and communication is required
to increase work efficiency. We present a collaborative visual
modeling framework which collaborative platform could be built on.
On this platform, cooperation and communication is available for
designers from different regions. This framework, which is different
from other collaborative frameworks, contains a uniform message
format, a message handling mechanism and other functions such as
message pretreatment and Role-Communication-Token Access
Control (RCTAC). We also show our implementation of this
framework called Orchestra Designer, which support BPLE
workflow modeling cooperatively online.
Abstract: Order reduction of linear-time invariant systems employing two methods; one using the advantages of Routh approximation and other by an evolutionary technique is presented in this paper. In Routh approximation method the denominator of the reduced order model is obtained using Routh approximation while the numerator of the reduced order model is determined using the indirect approach of retaining the time moments and/or Markov parameters of original system. By this method the reduced order model guarantees stability if the original high order model is stable. In the second method Particle Swarm Optimization (PSO) is employed to reduce the higher order model. PSO method is based on the minimization of the Integral Squared Error (ISE) between the transient responses of original higher order model and the reduced order model pertaining to a unit step input. Both the methods are illustrated through numerical examples.
Abstract: In this paper, a second order autoregressive (AR)
model is proposed to discriminate alcoholics using single trial
gamma band Visual Evoked Potential (VEP) signals using 3 different
classifiers: Simplified Fuzzy ARTMAP (SFA) neural network (NN),
Multilayer-perceptron-backpropagation (MLP-BP) NN and Linear
Discriminant (LD). Electroencephalogram (EEG) signals were
recorded from alcoholic and control subjects during the presentation
of visuals from Snodgrass and Vanderwart picture set. Single trial
VEP signals were extracted from EEG signals using Elliptic filtering
in the gamma band spectral range. A second order AR model was
used as gamma band VEP exhibits pseudo-periodic behaviour and
second order AR is optimal to represent this behaviour. This
circumvents the requirement of having to use some criteria to choose
the correct order. The averaged discrimination errors of 2.6%, 2.8%
and 11.9% were given by LD, MLP-BP and SFA classifiers. The
high LD discrimination results show the validity of the proposed
method to discriminate between alcoholic subjects.
Abstract: Displacement measurement was conducted on compact normal and shear specimens made of acrylic homogeneous material subjected to mixed-mode loading by digital image correlation. The intelligent hybrid method proposed by Nishioka et al. was applied to the stress-strain analysis near the crack tip. The accuracy of stress-intensity factor at the free surface was discussed from the viewpoint of both the experiment and 3-D finite element analysis. The surface images before and after deformation were taken by a CMOS camera, and we developed the system which enabled the real time stress analysis based on digital image correlation and inverse problem analysis. The great portion of processing time of this system was spent on displacement analysis. Then, we tried improvement in speed of this portion. In the case of cracked body, it is also possible to evaluate fracture mechanics parameters such as the J integral, the strain energy release rate, and the stress-intensity factor of mixed-mode. The 9-points elliptic paraboloid approximation could not analyze the displacement of submicron order with high accuracy. The analysis accuracy of displacement was improved considerably by introducing the Newton-Raphson method in consideration of deformation of a subset. The stress-intensity factor was evaluated with high accuracy of less than 1% of the error.
Abstract: Education in the modern world provides the socioeconomic
progress of society. In today's society, where the presence
of large middle class ensures its stability and is a symbol of
resolution of hidden economic problems, education is an integral part
of formation and reproduction of the middle class. This article presents part of results of the sociological study conducted under the
project "Kazakhstan model of education: international experience and national traditions" supported by the Foundation of the First President
of Republic of Kazakhstan - Leader of the Nation to determine the
ratio of students to the transformations of the educational system. The
authors conclude that the Kazakhstani system of education, passing
through the transformation processes, improving the quality of
educational programs and trying to correspond to the international
standards, not yet in full range, but begins to perform important
functions in the formation of the middle class.
Abstract: A direct connection between ElectroEncephaloGram
(EEG) and the genetic information of individuals has been
investigated by neurophysiologists and psychiatrists since 1960-s;
and it opens a new research area in the science. This paper focuses on
the person identification based on feature extracted from the EEG
which can show a direct connection between EEG and the genetic
information of subjects. In this work the full EO EEG signal of
healthy individuals are estimated by an autoregressive (AR) model
and the AR parameters are extracted as features. Here for feature
vector constitution, two methods have been proposed; in the first
method the extracted parameters of each channel are used as a
feature vector in the classification step which employs a competitive
neural network and in the second method a combination of different
channel parameters are used as a feature vector. Correct classification
scores at the range of 80% to 100% reveal the potential of our
approach for person classification/identification and are in agreement
to the previous researches showing evidence that the EEG signal
carries genetic information. The novelty of this work is in the
combination of AR parameters and the network type (competitive
network) that we have used. A comparison between the first and the
second approach imply preference of the second one.
Abstract: Estimation of stature is an important step in developing a biological profile for human identification. It may provide a valuable indicator for unknown individual in a population. The aim of this study was to analyses the relationship between stature and lower limb dimensions in the Malaysian population. The sample comprised 100 corpses, which included 69 males and 31 females between age ranges of 20 to 90 years old. The parameters measured were stature, thigh length, lower leg length, leg length, foot length, foot height and foot breadth. Results showed that mean values in males were significantly higher than those in females (P < 0.05). There were significant correlations between lower limb dimensions and stature. Cross-validation of the equation on 100 individuals showed close approximation between known stature and estimated stature. It was concluded that lower limb dimensions were useful for estimation of stature, which should be validated in future studies.