Abstract: Axisymmetric vibration of an infinite Pyrocomposite
circular hollow cylinder made of inner and outer pyroelectric layer of
6mm-class bonded together by a Linear Elastic Material with Voids
(LEMV) layer is studied. The exact frequency equation is obtained
for the traction free surfaces with continuity condition at the
interfaces. Numerical results in the form of data and dispersion
curves for the first and second mode of the axisymmetric vibration of
the cylinder BaTio3 / Adhesive / BaTio3 by taking the Adhesive layer
as an existing Carbon Fibre Reinforced Polymer (CFRP) are
compared with a hypothetical LEMV layer with and without voids
and as well with a pyroelectric hollow cylinder. The damping is
analyzed through the imaginary parts of the complex frequencies.
Abstract: A novel adaptive fuzzy trajectory tracking algorithm of Stewart platform based motion platform is proposed to compensate path deviation and degradation of controller-s performance due to actuator torque limit. The algorithm can be divided into two parts: the real-time trajectory shaping part and the joint space adaptive fuzzy controller part. For a reference trajectory in task space whenever any of the actuators is saturated, the desired acceleration of the reference trajectory is modified on-line by using dynamic model of motion platform. Meanwhile an additional action with respect to the difference between the nominal and modified trajectories is utilized in the non-saturated region of actuators to reduce the path error. Using modified trajectory as input, the joint space controller incorporates compute torque controller, leg velocity observer and fuzzy disturbance observer with saturation compensation. It can ensure stability and tracking performance of controller in present of external disturbance and position only measurement. Simulation results verify the effectiveness of proposed control scheme.
Abstract: A Cable-Driven Locomotion Interface provides a low
inertia haptic interface and is used as a way of enabling the user
to walk and interact with virtual surfaces. These surfaces generate
Cartesian wrenches which must be optimized for each motorized
reel in order to reproduce a haptic sensation in both feet. However,
the use of wrench control requires a measure of the cable tensions
applied to the moving platform. The latter measure may be inaccurate
if it is based on sensors located near the reel. Moreover, friction
hysteresis from the reel moving parts needs to be compensated
for with an evaluation of low angular velocity of the motor shaft.
Also, the pose of the platform is not known precisely due to cable
sagging and mechanical deformation. This paper presents a non-ideal
motorized reel design with its corresponding control strategy that
aims at overcoming the aforementioned issues. A transfert function
of the reel based on frequency responses in function of cable tension
and cable length is presented with an optimal adaptative PIDF
controller. Finally, an hybrid position/tension control is discussed with
an analysis of the stability for achieving a complete functionnality of
the haptic platform.
Abstract: Plasma plume will be produced and arrive at spacecraft when the electric thruster operates on orbit. It-s important to characterize the thruster plasma parameters because the plume has significant effects or hazards on spacecraft sub-systems and parts. Through the ground test data of the desired parameters, the major characteristics of the thruster plume will be achieved. Also it is very important for optimizing design of Ion thruster. Retarding Potential Analyzer (RPA) is an effective instrument for plasma ion energy per unit charge distribution measurement. Special RPA should be designed according to certain plume plasma parameters range and feature. In this paper, major principles usable for good RPA design are discussed carefully. Conform to these principles, a four-grid planar electrostatic energy analyzer RPA was designed to avoid false data, and details were discussed including construction, materials, aperture diameter and so on. At the same time, it was designed more suitable for credible and long-duration measurements in the laboratory. In the end, RPA measurement results in the laboratory were given and discussed.
Abstract: Mathematical models can be used to describe the
dynamics of the spread of infectious disease between susceptibles
and infectious populations. Dengue fever is a re-emerging disease in
the tropical and subtropical regions of the world. Its incidence has
increased fourfold since 1970 and outbreaks are now reported quite
frequently from many parts of the world. In dengue endemic regions,
more cases of dengue infection in pregnancy and infancy are being
found due to the increasing incidence. It has been reported that
dengue infection was vertically transmitted to the infants. Primary
dengue infection is associated with mild to high fever, headache,
muscle pain and skin rash. Immune response includes IgM antibodies
produced by the 5th day of symptoms and persist for 30-60 days. IgG
antibodies appear on the 14th day and persist for life. Secondary
infections often result in high fever and in many cases with
hemorrhagic events and circulatory failure. In the present paper, a
mathematical model is proposed to simulate the succession of dengue
disease transmission in pregnancy and infancy. Stability analysis of
the equilibrium points is carried out and a simulation is given for the
different sets of parameter. Moreover, the bifurcation diagrams of our
model are discussed. The controlling of this disease in infant cases is
introduced in the term of the threshold condition.
Abstract: In this paper, an automatic control system design
based on Integral Squared Error (ISE) parameter optimization
technique has been implemented on longitudinal flight dynamics of
an UAV. It has been aimed to minimize the error function between
the reference signal and the output of the plant. In the following
parts, objective function has been defined with respect to error
dynamics. An unconstrained optimization problem has been solved
analytically by using necessary and sufficient conditions of
optimality, optimum PID parameters have been obtained and
implemented in control system dynamics.
Abstract: An approach is offered for more precise definition of base lines- borders in handwritten cursive text and general problems of handwritten text segmentation have also been analyzed. An offered method tries to solve problems arose in handwritten recognition with specific slant or in other words, where the letters of the words are not on the same vertical line. As an informative features, some recognition systems use ascending and descending parts of the letters, found after the word-s baseline detection. In such recognition systems, problems in baseline detection, impacts the quality of the recognition and decreases the rate of the recognition. Despite other methods, here borders are found by small pieces containing segmentation elements and defined as a set of linear functions. In this method, separate borders for top and bottom border lines are found. At the end of the paper, as a result, azerbaijani cursive handwritten texts written in Latin alphabet by different authors has been analyzed.
Abstract: A bird strike can cause damage to stationary and
rotating aircraft engine parts, especially the engine fan. This paper
presents a bird strike simulated by blocking four stator blade
passages. It includes the numerical results of the unsteady lowfrequency
aerodynamic forces and the aeroelastic behaviour caused
by a non-symmetric upstream flow affecting the first two rotor blade
stages in the axial-compressor of a jet engine. The obtained results
show that disturbances in the engine inlet strongly influence the level
of unsteady forces acting on the rotor blades. With a partially
blocked inlet the whole spectrum of low-frequency harmonics is
observed. Such harmonics can lead to rotor blade damage. The lowfrequency
amplitudes are higher in the first stage rotor blades than in
the second stage. In both rotor blades stages flutter appeared as a
result of bird strike.
Abstract: Recent years have instance that there is a invigoration
of interest in drug discovery from medicinal plants for the support of
health in all parts of the world . This study was designed to examine
the in vitro antimicrobial activities of the flowers and leaves
methanolic and ethanolic extracts of Chenopodium album L.
Chenopodium album Linn. flowers and leaves were collected from
East Esfahan, Iran. The effects of methanolic and ethanolic extracts
were tested against 4 bacterial strains by using disc,well-diffusion
method. Results showed that flowers and leaves methanolic and
ethanolic extracts of C.album don-t have any activity against the
selected bacterial strains. Our study has indicated that ,there are
effective different factors on antimicrobial properties of plant extracts
Abstract: High power laser – total emissivity method (HPL-TE method) for determination of coatings relative total emissivity dependent on the temperature is introduced. Method principle, experimental and evaluation parts of the method are described. Computer model of HPL-TE method is employed to perform the sensitivity analysis of the effect of method parameters on the sample surface temperature in the positions where the surface temperature and radiation heat flux are measured.
Abstract: Traffic incident has bad effect on all parts of society
so controlling road networks with enough traffic devices could help
to decrease number of accidents, so using the best method for
optimum site selection of these devices could help to implement good
monitoring system. This paper has considered here important criteria
for optimum site selection of traffic camera based on aggregation
methods such as Bagging and Dempster-Shafer concepts. In the first
step, important criteria such as annual traffic flow, distance from
critical places such as parks that need more traffic controlling were
identified for selection of important road links for traffic camera
installation, Then classification methods such as Artificial neural
network and Decision tree algorithms were employed for
classification of road links based on their importance for camera
installation. Then for improving the result of classifiers aggregation
methods such as Bagging and Dempster-Shafer theories were used.
Abstract: A semi-analytic boundary discretization method, the Method of Auxiliary Sources (MAS) is used to analyze Optical Antennas consisting of metallic parts. In addition to standard dipoletype antennas, consisting of two pieces of metal, a new structure consisting of a single metal piece with a tiny groove in the center is analyzed. It is demonstrated that difficult numerical problems are caused because optical antennas exhibit strong material dispersion, loss, and plasmon-polariton effects that require a very accurate numerical simulation. This structure takes advantage of the Channel Plasmon-Polariton (CPP) effect and exhibits a strong enhancement of the electric field in the groove. Also primitive 3D antenna model with spherical nano particles is analyzed.
Abstract: In the upstream we place a piece of ring and rotate
it with 83Hz, 166Hz, 333Hz,and 666H to find the effect of the
periodic distortion.In the experiment this type of the perturbation
will not allow since the mechanical failure of any parts of the
equipment in the upstream will destroy the blade system. This type of
study will be only possible by CFD. We use two pumps NS32
(ENSAM) and three blades pump (Tamagawa Univ). The benchmark
computations were performed without perturbation parts, and confirm
the computational results well agreement in head-flow rate. We
obtained the pressure fluctuation growth rate that is representing the
global instability of the turbo-system. The fluctuating torque
components were 0.01Nm(5000rpm), 0.1Nm(10000rmp),
0.04Nm(20000rmp), 0.15Nm( 40000rmp) respectively. Only for
10000rpm(166Hz) the output toque was random, and it implies that it
creates unsteady flow by separations on the blades, and will reduce the
pressure loss significantly
Abstract: Recently, malware attacks have become more serious
over the Internet by e-mail, denial of service (DoS) or distributed
denial of service (DDoS). The Botnets have become a significant part
of the Internet malware attacks. The traditional botnets include three
parts – botmaster, command and control (C&C) servers and bots. The
C&C servers receive commands from botmaster and control the
distributions of computers remotely. Bots use DNS to find the
positions of C&C server. In this paper, we propose an advanced hybrid
peer-to-peer (P2P) botnet 2.0 (AHP2P botnet 2.0) using web 2.0
technology to hide the instructions from botmaster into social sites,
which are regarded as C&C servers. Servent bots are regarded as
sub-C&C servers to get the instructions from social sites. The AHP2P
botnet 2.0 can evaluate the performance of servent bots, reduce DNS
traffics from bots to C&C servers, and achieve harder detection bots
actions than IRC-based botnets over the Internet.
Abstract: This study was aimed for investigating of
manufacturing high aluminum content Mg alloys using a horizontal
twin roll caster. Recently, weight saving has been key issues for lighter
transport equipments as well as electronic component parts. As
alternative materials to aluminum alloys, developing magnesium alloy
with higher strength has been expected. Normally high Aluminum
content Mg alloy has poor ductility and is difficult to be rolled because
of its high strength. However, twin roll casting process is suitable for
manufacturing wrought Mg alloys because materials can be cast
directly from molten metal. In this study, manufacturing of high
aluminum content magnesium alloy sheet using the roll casting
process has been carried out. Effects of manufacturing parameter, such
as roll velocity, pouring temperature and roll gap, on casting was
investigated. A microscopic observation of the crystals of cross section
of as cast strip as well as rolled strip was conducted.
Abstract: The aim of this paper is to present current and future
procedures in castings procurement. Differences in procurement are
highlighted. The supplier selection criteria used in practice is
compared to literature findings. Different trends related to supply
chains are presented and it is described how they are reflected in
reality to castings procurement. To fulfil the aim, interviews were
conducted in nine companies using castings. It was found that largest
casting users have the most subcontractor foundries and it is more
typical that they have multiple suppliers for the same parts. Currently
only two companies out of nine purchase castings outside Europe,
but the others are also progressing in the same direction. The main
reason is the need to lower purchasing costs. Another trend is that all
companies want to buy cast components or sub-assemblies instead of
raw castings from foundries. It was found that price is a main
supplier selection criterion. All companies use competitive bidding in
supplier selection.
Abstract: Regression testing is a maintenance activity applied to
modified software to provide confidence that the changed parts are
correct and that the unchanged parts have not been adversely affected
by the modifications. Regression test selection techniques reduce the
cost of regression testing, by selecting a subset of an existing test
suite to use in retesting modified programs. This paper presents the
first general regression-test-selection technique, which based on code
and allows selecting test cases for any programs written in any
programming language. Then it handles incomplete program. We
also describe RTSDiff, a regression-test-selection system that
implements the proposed technique. The results of the empirical
studied that performed in four programming languages java, C#, Cµ
and Visual basic show that the efficiency and effective in reducing
the size of test suit.
Abstract: Today, canines are still used effectively in acceleration detection situation. However, this method is becoming impractical in modern age and a new automated replacement to the canine is required. This paper reports the design of an innovative accelerant detector. Designing an accelerant detector is a long process as is any design process; therefore, a solution to the need for a mobile, effective accelerant detector is hereby presented. The device is simple and efficient to ensure that any accelerant detection can be conducted quickly and easily. The design utilizes Ultra Violet (UV) light to detect the accelerant. When the UV light shines on an accelerant, the hydrocarbons in the accelerant emit florescence. The advantages of using the UV light to detect accelerant are also outlined in this paper. The mobility of the device is achieved by using a Direct Current (DC) motor to run tank tracks. Tank tracks were chosen as to ensure that the device will be mobile in the rough terrain of a fire site. The materials selected for the various parts are also presented. A Solid Works Simulation was also conducted on the stresses in the shafts and the results are presented. This design is an innovative solution which offers a user friendly interface. The design is also environmentally friendly, ecologically sound and safe to use.
Abstract: The paper presents a new hybridization methodology involving Neural, Fuzzy and Rough Computing. A Rough Sets based approximation technique has been proposed based on a certain Neuro – Fuzzy architecture. A New Rough Neuron composition consisting of a combination of a Lower Bound neuron and a Boundary neuron has also been described. The conventional convergence of error in back propagation has been given away for a new framework based on 'Output Excitation Factor' and an inverse input transfer function. The paper also presents a brief comparison of performances, of the existing Rough Neural Networks and ANFIS architecture against the proposed methodology. It can be observed that the rough approximation based neuro-fuzzy architecture is superior to its counterparts.
Abstract: This paper explores the opportunity of using tri-axial
wireless accelerometers for supervised monitoring of sports
movements. A motion analysis system for the upper extremities of
lawn bowlers in particular is developed. Accelerometers are placed
on parts of human body such as the chest to represent the shoulder
movements, the back to capture the trunk motion, back of the hand,
the wrist and one above the elbow, to capture arm movements. These
sensors placement are carefully designed in order to avoid restricting
bowler-s movements. Data is acquired from these sensors in soft-real
time using virtual instrumentation; the acquired data is then
conditioned and converted into required parameters for motion
regeneration. A user interface was also created to facilitate in the
acquisition of data, and broadcasting of commands to the wireless
accelerometers. All motion regeneration in this paper deals with the
motion of the human body segment in the X and Y direction, looking
into the motion of the anterior/ posterior and lateral directions
respectively.