Abstract: In biomedical implant field, a new formula is given
for the study of Radio Frequency power attenuation by simultaneous
effects of side and angular misalignment of the supply/data transfer
coils. A confrontation with the practical measurements done into a
Faraday cage, allowed a checking of the obtained theoretical results.
The DC supply systems without material connection and the data
transmitters used in the case of biomedical implants, can be well
dimensioned by taking into account the possibility of power
attenuation by misalignment of transfer coils
Abstract: An optical chemical sensing film based on
immobilizing of 1,1′- diethyl 2,2′-cyanine (pseudocyanine iodide) in
nafion film was developed for the determination of Fe(III). The
sensing film was homogeneous, transparent, and mechanically stable.
Decrease of the absorbance measured at 518 nm was observed when
the sensing film was immersed in a solution of Fe(III). The optimum
response of the sensing film to Fe(III) was obtained in a solution with
pH 4.0. Linear calibration curve over an Fe(III) concentration range
of 1-30 ppm with a limit of detection of 0.71 ppm was obtained.
Cd(II) is the major interference. The sensing film exhibited good
stability for 2 months and high reproducibility. The proposed method
was applied for the determination of Fe(III) in water samples with
satisfactory results.
Abstract: Image registration is the process of establishing point
by point correspondence between images obtained from a same
scene. This process is very useful in remote sensing, medicine,
cartography, computer vision, etc. Then, the task of registration is to
place the data into a common reference frame by estimating the
transformations between the data sets. In this work, we develop a
rigid point registration method based on the application of genetic
algorithms and Hausdorff distance. First, we extract the feature points
from both images based on the algorithm of global and local
curvature corner. After refining the feature points, we use Hausdorff
distance as similarity measure between the two data sets and for
optimizing the search space we use genetic algorithms to achieve
high computation speed for its inertial parallel. The results show the
efficiency of this method for registration of satellite images.
Abstract: Development of microprocessor controlled sensor for measurement of wind speed and direction is the aim of this study. Electrical circuits and software were developed to the existing electromechanical part of the sensor TM-W2 becoming the properties of so-called smart sensor. The measured data about wind speed (sensitivity 0.01 m/s) and direction (0-360° by step 10°) are transmitted as 16-bit information. The connection between sensor and control unit is realized by radio communication (FM 433 MHz). Transition range is 220 m if used Quad type antenna. This concept provides substitution of actual cable systems by wireless ones.
Abstract: In this paper, we present a comparative study of the
genetic algorithms and Hessian-s methods for optimal research of the
active powers in an electric network of power. The objective function
which is the performance index of production of electrical energy is
minimized by satisfying the constraints of the equality type and
inequality type initially by the Hessian-s methods and in the second
time by the genetic Algorithms. The results found by the application
of AG for the minimization of the electric production costs of power
are very encouraging. The algorithms seem to be an effective
technique to solve a great number of problems and which are in
constant evolution. Nevertheless it should be specified that the
traditional binary representation used for the genetic algorithms
creates problems of optimization of management of the large-sized
networks with high numerical precision.
Abstract: This study was conducted to evaluate the anti-diabetic
properties of ethanolic extract of two plants commonly used in folk
medicine, Mormodica charantia (bitter melon) and Trigonella
foenum-graecum (fenugreek). The study was performed on STZinduced
diabetic rats (DM type-I). Plant extracts of these two plants
were given to STZ diabetic rats at the concentration of 500 mg/kg
body weight ,50 mg/kg body weight respectively. Cidophage®
(metformin HCl) were administered to another group to support the
results at a dose of 500 mg/kg body weight, the ethanolic extracts and
Cidophage administered orally once a day for four weeks using a
stomach tube and; serum samples were obtained for biochemical
analysis. The extracts caused significant decreases in glucose levels
compared with diabetic control rats. Insulin secretions were increased
after 4 weeks of treatment with Cidophage® compared with the
control non-diabetic rats. Levels of AST and ALT liver enzymes were
normalized by all treatments. Decreases in liver cholesterol,
triglycerides, and LDL in diabetic rats were observed with all
treatments. HDL levels were increased by the treatments in the
following order: bitter melon, Cidophage®, and fenugreek. Creatinine
levels were reduced by all treatments. Serum nitric oxide and
malonaldehyde levels were reduced by all extracts. GSH levels were
increased by all extracts. Extravasation as measured by the Evans
Blue test increased significantly in STZ-induced diabetic animals.
This effect was reversed by ethanolic extracts of bitter melon or
fenugreek.
Abstract: Now a days video data embedding approach is a very challenging and interesting task towards keeping real time video data secure. We can implement and use this technique with high-level applications. As the rate-distortion of any image is not confirmed, because the gain provided by accurate image frame segmentation are balanced by the inefficiency of coding objects of arbitrary shape, with a lot factors like losses that depend on both the coding scheme and the object structure. By using rate controller in association with the encoder one can dynamically adjust the target bitrate. This paper discusses about to keep secure videos by mixing signature data with negligible distortion in the original video, and to keep steganographic video as closely as possible to the quality of the original video. In this discussion we propose the method for embedding the signature data into separate video frames by the use of block Discrete Cosine Transform. These frames are then encoded by real time encoding H.264 scheme concepts. After processing, at receiver end recovery of original video and the signature data is proposed.
Abstract: Building a service-centric business model requires
new knowledge and capabilities in companies. This paper enlightens
the challenges small and medium sized firms (SMEs) face when
developing their service-centric business models. This paper
examines the premise for knowledge transfer and capability
development required. The objective of this paper is to increase
knowledge about SME-s transformation to service-centric business
models.This paper reports an action research based case study. The
paper provides empirical evidence from three case companies. The
empirical data was collected through multiple methods. The findings
of the paper are: First, the developed model to analyze the current
state in companies. Second, the process of building the service –
centric business models. Third, the selection of suitable service
development methods. The lack of a holistic understanding on
service logic suggests that SMEs need practical and easy to use
methods to improve their business
Abstract: A reconfigurable manufacturing system (RMS) is an
advanced system designed at the outset for rapid changes in its hardware
and software components in order to quickly adjust its production
capacity and functionally. Among various operational decisions, this
study considers the scheduling problem that determines the input
sequence and schedule at the same time for a given set of parts. In
particular, we consider the practical constraints that the numbers of
pallets/fixtures are limited and hence a part can be released into the
system only when the fixture required for the part is available. To
solve the integrated input sequencing and scheduling problems, we
suggest a priority rule based approach in which the two sub-problems
are solved using a combination of priority rules. To show the effectiveness
of various rule combinations, a simulation experiment was
done on the data for a real RMS, and the test results are reported.
Abstract: Thermite welding is mainly used in world. The
reasons why the thermite welding method is widely used are
that the equipment has good mobility and total working time
of that is shorter than that of the enclosed arc welding method
on site. Moreover, the operating skill, which required for
thermite welding, is less than that of for enclosed arc welding.
In the present research work, heat treatment and combined
'expulsion and heat treatment' techniques were used improve
the mechanical properties and weldment structure. The
specimens were cut in the transverse direction from expulsion
with Heat treated and heat treated Thermite Welded rails.
Specimens were prepared according to AWS standard and
subjected to tensile test, Impact test and hardness and their
results were tabulated. Microstructural analysis was carried
out with the help of SEM. Then analyze to effect of heat
treated and 'expulsion with heat treated' with the properties of
their thermite welded rails. Compare the mechanical and
microstructural properties of thermite welded rails between
heat expulsion with heat treated and heat treated. Mechanical
and microstructural response expulsion with heat treated
thermite welded rail is higher value as compared to heat
treatment.
Abstract: Pore water pressure is normally because of
consolidation, compaction and water level fluctuation on reservoir.
Measuring, controlling and analyzing of pore water pressure have
significant importance in both of construction and operation period.
Since end of 2002, (dam start up) nature of KARKHEH dam has
been analyzed by using the gathered information from
instrumentation system of dam. In this lecture dam condition after
start up have been analyzed by using the gathered data from located
piezometers in core of dam. According to TERZAGHI equation and
records of piezometers, consolidation lasted around five years during
early years of construction stage, and current pore water pressure in
core of dam is caused by water level fluctuation in reservoir.
Although there is time lag between water level fluctuation and results
of piezometers. These time lags have been checked and the results
clearly show that one of the most important causes of it is distance
between piezometer and reservoir.
Abstract: Different approaches for heating\cooling of stirred tanks, coils and jackets, are investigated using computational fluid dynamics (CFD).A time-dependant sliding mesh approach is applied to simulate the flow in both conditions. The investigations are carried out under the turbulent flow conditions for a Rushton impeller and heating elements are considered isothermal. The flow behavior and temperature distribution are studied for each case and heat transfer coefficient is calculated. Results show different velocity profiles for each case. Unsteady temperature distribution is not similar for different cases .In the case of the coiled stirred vessel more uniform temperature and higher heat transfer coefficient is resulted.
Abstract: Digital libraries become more and more necessary in
order to support users with powerful and easy-to-use tools for
searching, browsing and retrieving media information. The starting
point for these tasks is the segmentation of video content into shots.
To segment MPEG video streams into shots, a fully automatic
procedure to detect both abrupt and gradual transitions (dissolve and
fade-groups) with minimal decoding in real time is developed in this
study. Each was explored through two phases: macro-block type's
analysis in B-frames, and on-demand intensity information analysis.
The experimental results show remarkable performance in
detecting gradual transitions of some kinds of input data and
comparable results of the rest of the examined video streams. Almost
all abrupt transitions could be detected with very few false positive
alarms.
Abstract: Part IV of the Civil Code of the Russian Federation dedicated to legal regulation of Intellectual property rights came into force in 2008. It is a first attempt of codification in Intellectual property sphere in Russia. That is why a lot of new norms appeared. The main problem of the Russian Civil Code (part IV) is that many rules (norms of Law) contradict the norms of International Intellectual property Law (i.e. protection of inventions, creations, ideas, know-how, trade secrets, innovations). Intellectual property rights protect innovations and creations and reward innovative and creative activity. Intellectual property rights are international in character and in that respect they fit in rather well with the economic reality of the global economy. Inventors prefer not to take out a patent for inventions because it is a very difficult procedure, it takes a lot of time and is very expensive. That-s why they try to protect their inventions as ideas, know-how, confidential information. An idea is the main element of any object of Intellectual property (creation, invention, innovation, know-how, etc.). But ideas are not protected by Civil Code of Russian Federation. The aim of the paper is to reveal the main problems of legal regulation of Intellectual property in Russia and to suggest possible solutions. The authors of this paper have raised these essential issues through different activities. Through the panel survey, questionnaires which were spread among the participants of intellectual activities the main problems of implementation of innovations, protecting of the ideas and know-how were identified. The implementation of research results will help to solve economic and legal problems of innovations, transfer of innovations and intellectual property.1
Abstract: When faced with stochastic networks with an uncertain
duration for their activities, the securing of network completion time
becomes problematical, not only because of the non-identical pdf of
duration for each node, but also because of the interdependence of
network paths. As evidenced by Adlakha & Kulkarni [1], many
methods and algorithms have been put forward in attempt to resolve
this issue, but most have encountered this same large-size network
problem. Therefore, in this research, we focus on network reduction
through a Series/Parallel combined mechanism. Our suggested
algorithm, named the Activity Network Reduction Algorithm
(ANRA), can efficiently transfer a large-size network into an S/P
Irreducible Network (SPIN). SPIN can enhance stochastic network
analysis, as well as serve as the judgment of symmetry for the Graph
Theory.
Abstract: Hepatitis B and hepatitis C are among the most
significant hepatic infections all around the world that may lead to
hepatocellular carcinoma. This study is first time performed at the
blood transfussion centre of Omar hospital, Lahore. It aims to
determine the sero-prevalence of these diseases by screening the
apparently healthy blood donors who might be the carriers of HBV or
HCV and pose a high risk in the transmission. It also aims the
comparison between the sensitivity of two diagnostic tests;
chromatographic immunoassay – one step test device and Enzyme
Linked Immuno Sorbant Assay (ELISA). Blood serum of 855
apparently healthy blood donors was screened for Hepatitis B surface
antigen (HBsAg) and for anti HCV antibodies. SPSS version 12.0
and X2 (Chi-square) test were used for statistical analysis. The seroprevalence
of HCV was 8.07% by the device method and by ELISA
9.12% and that of HBV was 5.6% by the device and 6.43% by
ELISA. The unavailability of vaccination against HCV makes it more
prevalent. Comparing the two diagnostic methods, ELISA proved to
be more sensitive.
Abstract: Internet is one of the major sources of information for
the person belonging to almost all the fields of life. Major language
that is used to publish information on internet is language. This thing
becomes a problem in a country like Pakistan, where Urdu is the
national language. Only 10% of Pakistan mass can understand
English. The reason is millions of people are deprived of precious
information available on internet. This paper presents a system for
translation from English to Urdu. A module LESSA is used that uses
a rule based algorithm to read the input text in English language,
understand it and translate it into Urdu language. The designed
approach was further incorporated to translate the complete website
from English language o Urdu language. An option appears in the
browser to translate the webpage in a new window. The designed
system will help the millions of users of internet to get benefit of the
internet and approach the latest information and knowledge posted
daily on internet.
Abstract: There are many classical algorithms for finding
routing in FPGA. But Using DNA computing we can solve the routes
efficiently and fast. The run time complexity of DNA algorithms is
much less than other classical algorithms which are used for solving
routing in FPGA. The research in DNA computing is in a primary
level. High information density of DNA molecules and massive
parallelism involved in the DNA reactions make DNA computing a
powerful tool. It has been proved by many research accomplishments
that any procedure that can be programmed in a silicon computer can
be realized as a DNA computing procedure. In this paper we have
proposed two tier approaches for the FPGA routing solution. First,
geometric FPGA detailed routing task is solved by transforming it
into a Boolean satisfiability equation with the property that any
assignment of input variables that satisfies the equation specifies a
valid routing. Satisfying assignment for particular route will result in
a valid routing and absence of a satisfying assignment implies that
the layout is un-routable. In second step, DNA search algorithm is
applied on this Boolean equation for solving routing alternatives
utilizing the properties of DNA computation. The simulated results
are satisfactory and give the indication of applicability of DNA
computing for solving the FPGA Routing problem.
Abstract: In this research, STNEP is being studied considering network adequacy and limitation of investment cost by decimal codification genetic algorithm (DCGA). The goal is obtaining the maximum of network adequacy with lowest expansion cost for a specific investment. Finally, the proposed idea is applied to the Garvers 6-bus network. The results show that considering the network adequacy for solution of STNEP problem is caused that among of expansion plans for a determined investment, configuration which has relatively lower expansion cost and higher adequacy is proposed by GA based method. Finally, with respect to the curve of adequacy versus expansion cost it can be said that more optimal configurations for expansion of network are obtained with lower investment costs.
Abstract: Utilizing echoic intension and distribution from different organs and local details of human body, ultrasonic image can catch important medical pathological changes, which unfortunately may be affected by ultrasonic speckle noise. A feature preserving ultrasonic image denoising and edge enhancement scheme is put forth, which includes two terms: anisotropic diffusion and edge enhancement, controlled by the optimum smoothing time. In this scheme, the anisotropic diffusion is governed by the local coordinate transformation and the first and the second order normal derivatives of the image, while the edge enhancement is done by the hyperbolic tangent function. Experiments on real ultrasonic images indicate effective preservation of edges, local details and ultrasonic echoic bright strips on denoising by our scheme.