Abstract: Given the motivation of maps impact in enhancing the
perception of the quality of life in a region, this work examines the
use of spatial analytical techniques in exploring the role of space in
shaping human development patterns in Assiut governorate.
Variations of human development index (HDI) of the governorate-s
villages, districts and cities are mapped using geographic information
systems (GIS). Global and local spatial autocorrelation measures are
employed to assess the levels of spatial dependency in the data and to
map clusters of human development. Results show prominent
disparities in HDI between regions of Assiut. Strong patterns of
spatial association were found proving the presence of clusters on the
distribution of HDI. Finally, the study indicates several "hot-spots" in
the governorate to be area of more investigations to explore the
attributes of such levels of human development. This is very
important for accomplishing the development plan of poorest regions
currently adopted in Egypt.
Abstract: Day by day technology increases and problems
associated with this technology also increase. Several researches
were carried out to investigate the deployment of such material safely
in geotechnical engineering in particular and civil engineering in
general. However, different types of waste material have such as
cement duct, fly ash and slag been proven to be suitable in several
applications. In this research cement dust mixed with different
percentages of sand will be used in some civil engineering
application as will be explained later in this paper throughout filed
and laboratory test. The used mixer (waste material with sand) prove
high performance, durability to environmental condition, low cost
and high benefits. At higher cement dust ratio, small cement ratio is
valuable for compressive strength and permeability. Also at small
cement dust ratio higher cement ratio is valuable for compressive
strength.
Abstract: Artifact rejection plays a key role in many signal processing applications. The artifacts are disturbance that can occur during the signal acquisition and that can alter the analysis of the signals themselves. Our aim is to automatically remove the artifacts, in particular from the Electroencephalographic (EEG) recordings. A technique for the automatic artifact rejection, based on the Independent Component Analysis (ICA) for the artifact extraction and on some high order statistics such as kurtosis and Shannon-s entropy, was proposed some years ago in literature. In this paper we try to enhance this technique proposing a new method based on the Renyi-s entropy. The performance of our method was tested and compared to the performance of the method in literature and the former proved to outperform the latter.
Abstract: HSDPA is a new feature which is introduced in
Release-5 specifications of the 3GPP WCDMA/UTRA standard to
realize higher speed data rate together with lower round-trip times.
Moreover, the HSDPA concept offers outstanding improvement of
packet throughput and also significantly reduces the packet call
transfer delay as compared to Release -99 DSCH. Till now the
HSDPA system uses turbo coding which is the best coding technique
to achieve the Shannon limit. However, the main drawbacks of turbo
coding are high decoding complexity and high latency which makes
it unsuitable for some applications like satellite communications,
since the transmission distance itself introduces latency due to
limited speed of light. Hence in this paper it is proposed to use LDPC
coding in place of Turbo coding for HSDPA system which decreases
the latency and decoding complexity. But LDPC coding increases the
Encoding complexity. Though the complexity of transmitter
increases at NodeB, the End user is at an advantage in terms of
receiver complexity and Bit- error rate. In this paper LDPC Encoder
is implemented using “sparse parity check matrix" H to generate a
codeword at Encoder and “Belief Propagation algorithm "for LDPC
decoding .Simulation results shows that in LDPC coding the BER
suddenly drops as the number of iterations increase with a small
increase in Eb/No. Which is not possible in Turbo coding. Also same
BER was achieved using less number of iterations and hence the
latency and receiver complexity has decreased for LDPC coding.
HSDPA increases the downlink data rate within a cell to a theoretical
maximum of 14Mbps, with 2Mbps on the uplink. The changes that
HSDPA enables includes better quality, more reliable and more
robust data services. In other words, while realistic data rates are
only a few Mbps, the actual quality and number of users achieved
will improve significantly.
Abstract: The main objective of this paper is applying a
comparison between the Wolf Pack Search (WPS) as a newly
introduced intelligent algorithm with several other known algorithms
including Particle Swarm Optimization (PSO), Shuffled Frog
Leaping (SFL), Binary and Continues Genetic algorithms. All
algorithms are applied on two benchmark cost functions. The aim is
to identify the best algorithm in terms of more speed and accuracy in
finding the solution, where speed is measured in terms of function
evaluations. The simulation results show that the SFL algorithm with
less function evaluations becomes first if the simulation time is
important, while if accuracy is the significant issue, WPS and PSO
would have a better performance.
Abstract: augmented reality is a technique used to insert virtual objects in real scenes. One of the most used libraries in the area is the ARToolkit library. It is based on the recognition of the markers that are in the form of squares with a pattern inside. This pattern which is mostly textual is source of confusing. In this paper, we present the results of a classification of Latin characters as a pattern on the ARToolkit markers to know the most distinguishable among them.
Abstract: Generally, administrative systems in an academic
environment are disjoint and support independent queries. The
objective in this work is to semantically connect these independent
systems to provide support to queries run on the integrated platform.
The proposed framework, by enriching educational material in the
legacy systems, provides a value-added semantics layer where
activities such as annotation, query and reasoning can be carried out
to support management requirements. We discuss the development of
this ontology framework with a case study of UAE University
program administration to show how semantic web technologies can
be used by administration to develop student profiles for better
academic program management.
Abstract: The cinema in Turkey during the 1940s was shaped
under the Second World War conditions. The amateur film makers
from different socioeconomic roots experienced movie production in
those years. Having similar socioeconomic characteristics and
autobiographies, each of them has a different understanding of
cinema. Nevertheless, they joined in making movies which address
native culture and audience. They narrated indigenous stories with
native music, amateur players and simple settings. Although the
martial law, censorship and economical deficiencies, they started to
produce films in the Second World War. The cinematographers of the
1940s usually called as thetransition period cinematographers in
Turkey, producing in the passage between the period of thetheatre
playersand the period of thenational cinema. But, 1940- 1950 period
of Turkish cinema should be defined not as a transition but a period
of forming the professional conscioussness in cinema.
Abstract: With today's fast lifestyles and busy schedule, nuclear
families are becoming popular. Thus, the elderly members of these
families are often neglected. This has lead to the popularity of the
concept of Community living for the aged. The elders reside at a
centre, which is controlled by the MANAGER. The manager takes
responsibility of the functioning of the centre which includes taking
care of 'residents' at the centre along with managing the daily chores
of the centre, which he accomplishes with the help of a number of
staff members and volunteers Often the Manager is not an employee
but a volunteer. In such cases especially, time is an important
constraint. A system, which provides an easy and efficient manner of
managing the working of an old age home in detail, will prove to be
of great benefit. We have developed a P.C. based organizer used to
monitor the various activities of an old age home. It is an effective
and easy-to-use system which will enable the manager to keep an
account of all the residents, their accounts, staff members, volunteers,
the centre-s logistic requirements etc. It is thus, a comprehensive
'Organizer' for Old Age Homes.
Abstract: In image processing and visualization, comparing two
bitmapped images needs to be compared from their pixels by matching
pixel-by-pixel. Consequently, it takes a lot of computational time
while the comparison of two vector-based images is significantly
faster. Sometimes these raster graphics images can be approximately
converted into the vector-based images by various techniques. After
conversion, the problem of comparing two raster graphics images
can be reduced to the problem of comparing vector graphics images.
Hence, the problem of comparing pixel-by-pixel can be reduced to
the problem of polynomial comparisons. In computer aided geometric
design (CAGD), the vector graphics images are the composition of
curves and surfaces. Curves are defined by a sequence of control
points and their polynomials. In this paper, the control points will be
considerably used to compare curves. The same curves after relocated
or rotated are treated to be equivalent while two curves after different
scaled are considered to be similar curves. This paper proposed an
algorithm for comparing the polynomial curves by using the control
points for equivalence and similarity. In addition, the geometric
object-oriented database used to keep the curve information has also
been defined in XML format for further used in curve comparisons.
Abstract: Whereas cellular wireless communication systems are
subject to short-and long-term fading. The effect of wireless channel
has largely been ignored in most of the teletraffic assessment
researches. In this paper, a mathematical teletraffic model is proposed
to estimate blocking and forced termination probabilities of cellular
wireless networks as a result of teletraffic behavior as well as the
outage of the propagation channel. To evaluate the proposed
teletraffic model, gamma inter-arrival and general service time
distributions have been considered based on wireless channel fading
effect. The performance is evaluated and compared with the classical
model. The proposed model is dedicated and investigated in different
operational conditions. These conditions will consider not only the
arrival rate process, but also, the different faded channels models.
Abstract: Detection and tracking of the lip contour is an important
issue in speechreading. While there are solutions for lip tracking
once a good contour initialization in the first frame is available,
the problem of finding such a good initialization is not yet solved
automatically, but done manually. We have developed a new tracking
solution for lip contour detection using only few landmarks (15
to 25) and applying the well known Active Shape Models (ASM).
The proposed method is a new LMS-like adaptive scheme based on
an Auto regressive (AR) model that has been fit on the landmark
variations in successive video frames. Moreover, we propose an extra
motion compensation model to address more general cases in lip
tracking. Computer simulations demonstrate a fair match between
the true and the estimated spatial pixels. Significant improvements
related to the well known LMS approach has been obtained via a
defined Frobenius norm index.
Abstract: In today-s era of plasma and laser cutting, machines using oxy-acetylene flame are also meritorious due to their simplicity and cost effectiveness. The objective to devise a Computer controlled Oxy-Fuel profile cutting machine arose from the increasing demand for metal cutting with respect to edge quality, circularity and lesser formation of redeposit material. The System has an 8 bit micro controller based embedded system, which assures stipulated time response. A new window based Application software was devised which takes a standard CAD file .DXF as input and converts it into numerical data required for the controller. It uses VB6 as a front end whereas MS-ACCESS and AutoCAD as back end. The system is designed around AT89C51RD2, powerful 8 bit, ISP micro controller from Atmel and is optimized to achieve cost effectiveness and also maintains the required accuracy and reliability for complex shapes. The backbone of the system is a cleverly designed mechanical assembly along with the embedded system resulting in an accuracy of about 10 microns while maintaining perfect linearity in the cut. This results in substantial increase in productivity. The observed results also indicate reduced inter laminar spacing of pearlite with an increase in the hardness of the edge region.
Abstract: The hydrolysis kinetics of polycrystalline lithium hydride (LiH) in argon at various low humidities was measured by gravimetry and Raman spectroscopy with ambient water concentration ranging from 200 to 1200 ppm. The results showed that LiH hydrolysis curve revealed a paralinear shape, which was attributed to two different reaction stages that forming different products as explained by the 'Layer Diffusion Control' model. Based on the model, a novel two-stage rate equation for LiH hydrolysis reactions was developed and used to fit the experimental data for determination of Li2O steady thickness Hs and the ultimate hydrolysis rate vs. The fitted data presented a rise of Hs as ambient water concentration cw increased. However, in spite of the negative effect imposed by Hs increasing, the upward trend of vs remained, which implied that water concentration, rather than Li2O thickness, played a predominant role in LiH hydrolysis kinetics. In addition, the proportional relationship between vsHs and cw predicted by rate equation and confirmed by gravimetric data validated the model in such conditions.
Abstract: The research study evaluated the performance of
irrigation system by using special scientific tools like Remote
Sensing and GIS technology, so that proper measurements could be
taken for the sustainable agriculture and water management.
Different performance evaluation parameters had been calculated for
the purposed data was gathered from field investigation and different
government and private organizations. According to the calculations,
organic matter ranges from 0.19% (low value) to 0.76% (high value).
In flat irrigation system for wheat yield ranges from 3347.16 to
5260.39 kg/ha, while the total water applied to wheat crop ranges
from 252.94 to 279.19 mm and WUE ranges from 13.07 to 18.37
kg/ha/mm. For rice yield ranges from 3347.47 to 5433.07 kg/ha with
total water supplied to rice crop ranges from 764.71 to 978.15 mm
and WUE ranges from 3.49 to 5.71 kg/ha/mm. Similarly, in raised
bed system wheat yield ranges from 4569.13 to 6008.60 kg/ha, total
water supplied ranges from 158.87 to 185.09 mm and WUE ranges
from 27.20 to 33.54 kg/ha/mm while in rice crop, yield ranges from
5285.04 to 6716.69 kg/ha, total water supplied ranges from 600.72 to
755.06 mm and WUE ranges from 6.41 to 10.05 kg/ha/mm. Almost
51.3% water saving is observed in bed irrigation system as compared
to flat system. Less water supplied to beds is more affective as its
WUE value is higher than flat system where more water is supplied
in both the seasons. Similarly, RWS values show that maximum
water deficit while minimum area is getting adequate water supply.
Greater yield is recorded in bed system as plant per square meter is
more in bed system in comparison of flat system Thus, the integration
of GIS tools to regularly compute performance indices could provide
irrigation managers with the means for managing efficiently the
irrigation system.
Abstract: β-Glucosidase is an important enzyme for production
of ethanol from lignocellulose. With hydrolytic activity on
cellooligosaccharides, especially cellobiose, β-glucosidase removes
product inhibitory effect on cellulases and forms fermentable sugars.
In this study, β-glucosidase encoding gene (BGL1) from traditional
starter yeast Saccharomycosis fibuligera BMQ908 was cloned and
expressed in Pichia pastoris. BGL1 of S. fibuligera BMQ 908 shared
98% nucleotide homology with the closest GenBank sequence
(M22475) but identity in amino-acid sequences of catalytic domains.
Recombinant plasmid pPICZαA/BGL1 containing the sequence
encoding BGL1 mature protein and α-factor secretion signal was
constructed and transformed into methylotrophic yeast P. pastoris by
electroporation. The recombinant strain produced single extracellular
protein with molecular weight of 120 kDa and cellobiase activity of
60 IU/ml. The optimum pH of the recombinant β-glucosidase was 5.0
and the optimum temperature was 50°C.
Abstract: Generally speaking, the mobile robot is capable of
sensing its surrounding environment, interpreting the sensed
information to obtain the knowledge of its location and the
environment, planning a real-time trajectory to reach the object. In
this process, the issue of obstacle avoidance is a fundamental topic to
be challenged. Thus, an adaptive path-planning control scheme is
designed without detailed environmental information, large memory
size and heavy computation burden in this study for the obstacle
avoidance of a mobile robot. In this scheme, the robot can gradually
approach its object according to the motion tracking mode, obstacle
avoidance mode, self-rotation mode, and robot state selection. The
effectiveness of the proposed adaptive path-planning control scheme
is verified by numerical simulations of a differential-driving mobile
robot under the possible occurrence of obstacle shapes.
Abstract: The Prediction of aerodynamic characteristics and
shape optimization of airfoil under the ground effect have been carried
out by integration of computational fluid dynamics and the multiobjective
Pareto-based genetic algorithm. The main flow
characteristics around an airfoil of WIG craft are lift force, lift-to-drag
ratio and static height stability (H.S). However, they show a strong
trade-off phenomenon so that it is not easy to satisfy the design
requirements simultaneously. This difficulty can be resolved by the
optimal design. The above mentioned three characteristics are chosen
as the objective functions and NACA0015 airfoil is considered as a
baseline model in the present study. The profile of airfoil is
constructed by Bezier curves with fourteen control points and these
control points are adopted as the design variables. For multi-objective
optimization problems, the optimal solutions are not unique but a set
of non-dominated optima and they are called Pareto frontiers or Pareto
sets. As the results of optimization, forty numbers of non- dominated
Pareto optima can be obtained at thirty evolutions.
Abstract: This paper is introduced a modification to Diffie-
Hellman protocol to be applicable on the decimal numbers, which
they are the numbers between zero and one. For this purpose we
extend the theory of the congruence. The new congruence is over
the set of the real numbers and it is called the “real congruence"
or the “real modulus". We will refer to the existing congruence by
the “integer congruence" or the “integer modulus". This extension
will define new terms and redefine the existing terms. As the
properties and the theorems of the integer modulus are extended as
well. Modified Diffie-Hellman key exchange protocol is produced a
sharing, secure and decimal secret key for the the cryptosystems that
depend on decimal numbers.
Abstract: Prime Factorization based on Quantum approach in
two phases has been performed. The first phase has been achieved at
Quantum computer and the second phase has been achieved at the
classic computer (Post Processing). At the second phase the goal is to
estimate the period r of equation xrN ≡ 1 and to find the prime factors
of the composite integer N in classic computer. In this paper we
present a method based on Randomized Approach for estimation the
period r with a satisfactory probability and the composite integer N
will be factorized therefore with the Randomized Approach even the
gesture of the period is not exactly the real period at least we can find
one of the prime factors of composite N. Finally we present some
important points for designing an Emulator for Quantum Computer
Simulation.