Abstract: Quantitative Investigation of impact of the factors' contribution towards measuring the reusability of software components could be helpful in evaluating the quality of developed or developing reusable software components and in identification of reusable component from existing legacy systems; that can save cost of developing the software from scratch. But the issue of the relative significance of contributing factors has remained relatively unexplored. In this paper, we have use the Taguchi's approach in analyzing the significance of different structural attributes or factors in deciding the reusability level of a particular component. The results obtained shows that the complexity is the most important factor in deciding the better Reusability of a function oriented Software. In case of Object Oriented Software, Coupling and Complexity collectively play significant role in high reusability.
Abstract: Encrypted messages sending frequently draws the attention
of third parties, perhaps causing attempts to break and
reveal the original messages. Steganography is introduced to hide
the existence of the communication by concealing a secret message
in an appropriate carrier like text, image, audio or video. Quantum
steganography where the sender (Alice) embeds her steganographic
information into the cover and sends it to the receiver (Bob) over a
communication channel. Alice and Bob share an algorithm and hide
quantum information in the cover. An eavesdropper (Eve) without
access to the algorithm can-t find out the existence of the quantum
message. In this paper, a text quantum steganography technique based
on the use of indefinite articles (a) or (an) in conjunction with the nonspecific
or non-particular nouns in English language and quantum
gate truth table have been proposed. The authors also introduced a
new code representation technique (SSCE - Secret Steganography
Code for Embedding) at both ends in order to achieve high level of
security. Before the embedding operation each character of the secret
message has been converted to SSCE Value and then embeds to cover
text. Finally stego text is formed and transmits to the receiver side.
At the receiver side different reverse operation has been carried out
to get back the original information.
Abstract: Rainfall data at fine resolution and knowledge of its
characteristics plays a major role in the efficient design and operation
of agricultural, telecommunication, runoff and erosion control as well
as water quality control systems. The paper is aimed to study the
statistical distribution of hourly rainfall depth for 12 representative
stations spread across Peninsular Malaysia. Hourly rainfall data of 10
to 22 years period were collected and its statistical characteristics
were estimated. Three probability distributions namely, Generalized
Pareto, Exponential and Gamma distributions were proposed to
model the hourly rainfall depth, and three goodness-of-fit tests,
namely, Kolmogorov-Sminov, Anderson-Darling and Chi-Squared
tests were used to evaluate their fitness. Result indicates that the east
cost of the Peninsular receives higher depth of rainfall as compared
to west coast. However, the rainfall frequency is found to be
irregular. Also result from the goodness-of-fit tests show that all the
three models fit the rainfall data at 1% level of significance.
However, Generalized Pareto fits better than Exponential and
Gamma distributions and is therefore recommended as the best fit.
Abstract: Friction-stir welding has received a huge interest in the last few years. The many advantages of this promising process have led researchers to present different theoretical and experimental explanation of the process. The way to quantitatively and qualitatively control the different parameters of the friction-stir welding process has not been paved. In this study, a refined energybased model that estimates the energy generated due to friction and plastic deformation is presented. The effect of the plastic deformation at low energy levels is significant and hence a scale factor is introduced to control its effect. The predicted heat energy and the obtained maximum temperature using our model are compared to the theoretical and experimental results available in the literature and a good agreement is obtained. The model is applied to AA6000 and AA7000 series.
Abstract: Tumor classification is a key area of research in the
field of bioinformatics. Microarray technology is commonly used in
the study of disease diagnosis using gene expression levels. The
main drawback of gene expression data is that it contains thousands
of genes and a very few samples. Feature selection methods are used
to select the informative genes from the microarray. These methods
considerably improve the classification accuracy. In the proposed
method, Genetic Algorithm (GA) is used for effective feature
selection. Informative genes are identified based on the T-Statistics,
Signal-to-Noise Ratio (SNR) and F-Test values. The initial candidate
solutions of GA are obtained from top-m informative genes. The
classification accuracy of k-Nearest Neighbor (kNN) method is used
as the fitness function for GA. In this work, kNN and Support Vector
Machine (SVM) are used as the classifiers. The experimental results
show that the proposed work is suitable for effective feature
selection. With the help of the selected genes, GA-kNN method
achieves 100% accuracy in 4 datasets and GA-SVM method
achieves in 5 out of 10 datasets. The GA with kNN and SVM
methods are demonstrated to be an accurate method for microarray
based tumor classification.
Abstract: The relevance of the study of everyday life in Almaty
and Kyzylorda are associated with the emergence of the modern
trends in historiography and socializing areas of government reform.
The relevance is due to the fact that in the early twentieth century
Kyzylorda and Almaty began to develop as a city and this period has
a special place in the life of the state. An interesting aspect of the
everyday life of the inhabitants of the new city, which was built in the
era of Stalin's Five-Year Plans, can be examined through the eyes of
the Soviet people living in a specific environment, reflecting the life
of the citizens. The study of industrialization of the Soviet Union and
the attention paid to new developments in the first five years of
everyday aspects as the impact of the modernization of the 1930s was
one of the decisive factors in the lives of residents. Among these
factors, we would like to highlight the medical field, which is the
basis of all human life, specifically focusing on the state of medicine
in Alma-Ata in the first 20-30-years of the twentieth century, and
analyze the different aspects of human life, determining the quality of
medical care to the population during this period.
Abstract: This research paper is based upon the simulation of
gradient of mathematical functions and scalar fields using MATLAB.
Scalar fields, their gradient, contours and mesh/surfaces are
simulated using different related MATLAB tools and commands for
convenient presentation and understanding. Different mathematical
functions and scalar fields are examined here by taking their
gradient, visualizing results in 3D with different color shadings and
using other necessary relevant commands. In this way the outputs of
required functions help us to analyze and understand in a better way
as compared to just theoretical study of gradient.
Abstract: Petri Net being one of the most useful graphical tools for modelling complex asynchronous systems, we have used Petri Net to model multi-track railway level crossing system. The roadway has been augmented with four half-size barriers. For better control, a three stage control mechanism has been introduced to ensure that no road-vehicle is trapped on the level crossing. Timed Petri Net is used to include the temporal nature of the signalling system. Safeness analysis has also been included in the discussion section.
Abstract: Consumer behaviour analysis represents an important
field of study in marketing. Particularly strategy development for
marketing and communications will be more focused and effective
when marketers have an understanding of the motivations, behaviour
and psychology of consumers. While materialism has been found to
be one of the important elements in consumer behaviour, compulsive
consumption represents another aspect that has recently attracted
more attention. This is because of the growing prevalence of
dysfunctional buying that has raised concern in consumer societies.
Present studies and analyses on origins and motivations of
compulsive buying have mainly focused on either individual factors
or groups of related factors and hence a need for a holistic view
exists. This paper provides a comprehensive perspective on
compulsive consumption and establishes relevant propositions
keeping the family life cycle stages as a reference for the incidence of
chronic consumer states and their influence on compulsive
consumption.
Abstract: This paper attempts to discuss the spam issue from the Malaysian e-mail users- perspective. The purpose is to discover how Malaysian users handle the spam e-mail problem. From the experiences we hope to discover the necessary effort needed to be undertaken to face this problem in the context of Malaysia. A survey was conducted to understand how Malaysian individual perceived spam and what they actually do with the spam e-mail they received in their daily life. The findings indicate that the level of awareness on spam issue in action is still low and need some extra effort by government and relevant agencies to increase their level of awareness.
Abstract: Biochemical and molecular analysis of some
antioxidant enzyme genes revealed different level of gene expression
on oilseed (Brassica napus). For molecular and biochemical
analysis, leaf tissues were harvested from plants at eight different
developmental stages, from young to senescence. The levels of total
protein and chlorophyll were increased during maturity stages of
plant, while these were decreased during the last stages of plant
growth. Structural analysis (nucleotide and deduced amino acid
sequence, and phylogenic tree) of a complementary DNA revealed a
high level of similarity for a family of Catalase genes. The
expression of the gene encoded by different Catalase isoforms was
assessed during different plant growth phase. No significant
difference between samples was observed, when Catalase activity
was statistically analyzed at different developmental stages. EST
analysis exhibited different transcripts levels for a number of other
relevant antioxidant genes (different isoforms of SOD and
glutathione). The high level of transcription of these genes at
senescence stages was indicated that these genes are senescenceinduced
genes.
Abstract: An attempt was made to study of nitrogen
components response of corn (Zea mays L.) to drought stress. A farm
research was done in RCBD as split-plot with four replications in
Khorramabad, west Iran. Drought stress levels as irrigation regimes
after 75 (control), 100, and 120 (stress) mm cumulative evaporation
were in main plots, and four seed corn varieties include 500 (medium
maturity), 647, 700, and 704 (long maturity) were as subplots.
Soluble protein, nitrate and proline amino acid were measured in
shoot and root at flowering stage, and grain yield was measured in
harvesting stage. As the drought progressed, the amount of nitrate
and proline followed an increasing trend, but soluble protein
decreased in shoot and root. The highest amount of nitrate and
proline was observed in longer maturity varieties than shorter ones,
but decrease yield of long maturity varieties was higher than medium
maturity varieties in drought condition, because of long duration of
stress.
Abstract: The classification of the protein structure is commonly
not performed for the whole protein but for structural domains, i.e.,
compact functional units preserved during evolution. Hence, a first
step to a protein structure classification is the separation of the
protein into its domains. We approach the problem of protein domain
identification by proposing a novel graph theoretical algorithm. We
represent the protein structure as an undirected, unweighted and
unlabeled graph which nodes correspond the secondary structure
elements of the protein. This graph is call the protein graph. The
domains are then identified as partitions of the graph corresponding
to vertices sets obtained by the maximization of an objective function,
which mutually maximizes the cycle distributions found in the
partitions of the graph. Our algorithm does not utilize any other kind
of information besides the cycle-distribution to find the partitions. If
a partition is found, the algorithm is iteratively applied to each of
the resulting subgraphs. As stop criterion, we calculate numerically
a significance level which indicates the stability of the predicted
partition against a random rewiring of the protein graph. Hence,
our algorithm terminates automatically its iterative application. We
present results for one and two domain proteins and compare our
results with the manually assigned domains by the SCOP database
and differences are discussed.
Abstract: The source voltage of high-power fuel cell shows strong load dependence at comparatively low voltage levels. In order to provide the voltage of 750V on the DC-link for feeding electrical energy into the mains via a three phase inverter a step-up converter with a large step-up ratio is required. The output voltage of this DC/DC-converter must be stabile during variations of the load current and the voltage of the fuel cell. This paper presents the methods and results of the calculation of the efficiency and the expense for the realization for the circuits of the DC/DC-converter that meet these requirements.
Abstract: Recommender Systems act as personalized decision
guides, aiding users in decisions on matters related to personal taste.
Most previous research on Recommender Systems has focused on the
statistical accuracy of the algorithms driving the systems, with no
emphasis on the trustworthiness of the user. RS depends on
information provided by different users to gather its knowledge. We
believe, if a large group of users provide wrong information it will
not be possible for the RS to arrive in an accurate conclusion. The
system described in this paper introduce the concept of Testing the
knowledge of user to filter out these “bad users".
This paper emphasizes on the mechanism used to provide robust
and effective recommendation.
Abstract: This research tries to analyze the role that knowledge
about foreign markets has in increasing firms- exports in clustered
spaces. We consider two interrelated sources of knowledge: firms-
direct experience and indirect experience from other clustered firms –
export externalities. In particular, it is proposed that firms would
improve their export performance by accessing to export externalities
if they have some previous direct experience that allows them to
identify, understand and exploit them. Also, we propose that this
positive influence of previous direct experience on export
externalities keeps only up to a point, where it becomes negative,
creating an inverted “U" shape. Empirical evidence gathered among
wine producers located in La Rioja tends to confirm that firms enjoy
of export externalities if they have export experience along several
years and countries increase their export performance. While this
relationship becomes less relevant as they develop a higher
experience, we could not confirm the existence of a curvilinear
relationship in their influence on export externalities and export
performance.
Abstract: We present a non standard Euclidean vehicle
routing problem adding a level of clustering, and we revisit the use
of self-organizing maps as a tool which naturally handles such
problems. We present how they can be used as a main operator
into an evolutionary algorithm to address two conflicting
objectives of route length and distance from customers to bus stops
minimization and to deal with capacity constraints. We apply the
approach to a real-life case of combined clustering and vehicle
routing for the transportation of the 780 employees of an
enterprise. Basing upon a geographic information system we
discuss the influence of road infrastructures on the solutions
generated.
Abstract: The purpose of this paper was to study motivation
factors affecting job performance effectiveness. This paper drew
upon data collected from an Internal Audit Staffs of Internal Audit
Line of Head Office of Krung Thai Public Company Limited.
Statistics used included frequency, percentage, mean and standard
deviation, t-test, and one-way ANOVA test. The finding revealed that
the majority of the respondents were female of 46 years of age and
over, married and live together, hold a bachelor degree, with an
average monthly income over 70,001 Baht. The majority of
respondents had over 15 years of work experience. They generally
had high working motivation as well as high job performance
effectiveness.
The hypotheses testing disclosed that employees with different
working status had different level of job performance effectiveness at
a 0.01 level of significance. Working motivation factors had an effect
on job performance in the same direction with high level. Individual
working motivation included working completion, reorganization,
working progression, working characteristic, opportunity,
responsibility, management policy, supervision, relationship with
their superior, relationship with co-worker, working position,
working stability, safety, privacy, working conditions, and payment.
All of these factors related to job performance effectiveness in the
same direction with medium level.
Abstract: In this paper, a robust watermarking algorithm using
the wavelet transform and edge detection is presented. The efficiency
of an image watermarking technique depends on the preservation of
visually significant information. This is attained by embedding the
watermark transparently with the maximum possible strength. The
watermark embedding process is carried over the subband
coefficients that lie on edges, where distortions are less noticeable,
with a subband level dependent strength. Also, the watermark is
embedded to selected coefficients around edges, using a different
scale factor for watermark strength, that are captured by a
morphological dilation operation. The experimental evaluation of the
proposed method shows very good results in terms of robustness and
transparency to various attacks such as median filtering, Gaussian
noise, JPEG compression and geometrical transformations.
Abstract: Technology transfer of renewable energy technologies is very often unsuccessful in the developing world. Aside from challenges that have social, economic, financial, institutional and environmental dimensions, technology transfer has generally been misunderstood, and largely seen as mere delivery of high tech equipment from developed to developing countries or within the developing world from R&D institutions to society. Technology transfer entails much more, including, but not limited to: entire systems and their component parts, know-how, goods and services, equipment, and organisational and managerial procedures. Means to facilitate the successful transfer of energy technologies, including the sharing of lessons are subsequently extremely important for developing countries as they grapple with increasing energy needs to sustain adequate economic growth and development. Improving the success of technology transfer is an ongoing process as more projects are implemented, new problems are encountered and new lessons are learnt. Renewable energy is also critical to improve the quality of lives of the majority of people in developing countries. In rural areas energy is primarily traditional biomass. The consumption activities typically occur in an inefficient manner, thus working against the notion of sustainable development. This paper explores the implementation of technology transfer in the developing world (sub-Saharan Africa). The focus is necessarily on RETs since most rural energy initiatives are RETs-based. Additionally, it aims to highlight some lessons drawn from the cited RE projects and identifies notable differences where energy technology transfer was judged to be successful. This is done through a literature review based on a selection of documented case studies which are judged against the definition provided for technology transfer. This paper also puts forth research recommendations that might contribute to improved technology transfer in the developing world. Key findings of this paper include: Technology transfer cannot be complete without satisfying pre-conditions such as: affordability, maintenance (and associated plans), knowledge and skills transfer, appropriate know how, ownership and commitment, ability to adapt technology, sound business principles such as financial viability and sustainability, project management, relevance and many others. It is also shown that lessons are learnt in both successful and unsuccessful projects.