Abstract: The behavior of Radial Basis Function (RBF) Networks greatly depends on how the center points of the basis functions are selected. In this work we investigate the use of instance reduction techniques, originally developed to reduce the storage requirements of instance based learners, for this purpose. Five Instance-Based Reduction Techniques were used to determine the set of center points, and RBF networks were trained using these sets of centers. The performance of the RBF networks is studied in terms of classification accuracy and training time. The results obtained were compared with two Radial Basis Function Networks: RBF networks that use all instances of the training set as center points (RBF-ALL) and Probabilistic Neural Networks (PNN). The former achieves high classification accuracies and the latter requires smaller training time. Results showed that RBF networks trained using sets of centers located by noise-filtering techniques (ALLKNN and ENN) rather than pure reduction techniques produce the best results in terms of classification accuracy. The results show that these networks require smaller training time than that of RBF-ALL and higher classification accuracy than that of PNN. Thus, using ALLKNN and ENN to select center points gives better combination of classification accuracy and training time. Our experiments also show that using the reduced sets to train the networks is beneficial especially in the presence of noise in the original training sets.
Abstract: The designing of charge pump with high gain Op-
Amp is a challenging task for getting faithful response .Design of
high performance phase locked loop require ,a design of high
performance charge pump .We have designed a operational amplifier
for reducing the error caused by high speed glitch in a transistor and
mismatch currents . A separate Op-Amp has designed in 180 nm
CMOS technology by CADENCE VIRTUOSO tool. This paper
describes the design of high performance charge pump for GHz
CMOS PLL targeting orthogonal frequency division multiplexing
(OFDM) application. A high speed low power consumption Op-Amp
with more than 500 MHz bandwidth has designed for increasing the
speed of charge pump in Phase locked loop.
Abstract: In films, visual effects have played the role of
expressing realities more realistically or describing imaginations as if
they are real. Such images are immediated images representing
realism, and the logic of immediation for the reality of images has
been perceived dominant in visual effects. In order for immediation to
have an identity as immediation, there should be the opposite concept
hypermediation.
In the mid 2000s, hypermediated images were settled as a code of
mass culture in Asia. Thus, among Asian films highly popular in those
days, this study selected five displaying hypermediated images – 2 Korean, 2 Japanese, and 1 Thailand movies – and examined the
semiotic meanings of such images using Roland Barthes- directional and implicated meaning analysis and Metz-s paradigmatic analysis
method, focusing on how hypermediated images work in the general
context of the films, how they are associated with spaces, and what
meanings they try to carry.
Abstract: Feeder is one of the airships of the Multibody Advanced Airship for Transport (MAAT) system, under development within the EU FP7 project. MAAT is based on a modular concept composed of two different parts that have the possibility to join; respectively they are the so-called Cruiser and Feeder, designed on the lighter than air principle. Feeder, also named ATEN (Airship Transport Elevator Network), is the smaller one which joins the bigger one, Cruiser, also named PTAH (Photovoltaic modular Transport Airship for High altitude),envisaged to happen at 15km altitude. During the MAAT design phase, the aerodynamic studies of the both airships and their interactions are analyzed. The objective of these studies is to understand the aerodynamic behavior of all the preselected configurations, as an important element in the overall MAAT system design. The most of these configurations are only simulated by CFD, while the most feasible one is experimentally analyzed in order to validate and thrust the CFD predictions. This paper presents the numerical and experimental investigation of the Feeder “conical like" shape configuration. The experiments are focused on the aerodynamic force coefficients and the pressure distribution over the Feeder outer surface, while the numerical simulation cover also the analysis of the velocity and pressure distribution. Finally, the wind tunnel experiment is compared with its CFD model in order to validate such specific simulations with respective experiments and to better understand the difference between the wind tunnel and in-flight circumstances.
Abstract: Optical network uses a tool for routing which is called
Latin router. These routers use particular algorithms for routing. In this paper, we present algorithm for configuration of optical network that is optimized regarding previous algorithm. We show that by decreasing the number of hops for source-destination in lightpath number of satisfied request is less. Also we had shown that more than
single-hop lightpath relating single-hop lightpath is better.
Abstract: The culture of riding heavy motorcycles originates
from advanced countries and mainly comes from Europe, North
America, and Japan. Heavy duty motorcycle riders are different from
people who view motorcycles as a convenient mean of transportation.
They regard riding them as a kind of enjoyment and high-level taste.
The activities of riding heavy duty motorcycles have formes a
distinctive landscape in domestic land in Taiwan. Previous studies
which explored motorcycle culture in Taiwan still focused on the
objects of motorcycle engine displacement under 50 cc.. The study
aims to study the heavy duty motorcycles of engine displacement over
550 cc. and explores where their attractiveness is. For finding the
attractiveness of heavy duty motorcycle, the study chooses Miryoku
Engineering (Preference-Based Design) approach. Two steps are
adopted to proceed the research. First, through arranging the letters
obtained from interviewing experts, EGM (The Evaluation Grid
Method) was applied to find out the structure of attractiveness. The
attractive styles are eye-dazzling, leisure, classic, and racing
competitive styles. Secondarily, Quantification Theory Type I analysis
was adopted as a tool for analyzing the importance of attractiveness.
The relationship between style and attractive parts was also discussed.
The results could contribute to the design and research development of
heavy duty motorcycle industry in Taiwan.
Abstract: In this research work, a novel parallel manipulator
with high positioning and orienting rate is introduced. This
mechanism has two rotational and one translational degree of
freedom. Kinematics and Jacobian analysis are investigated.
Moreover, workspace analysis and optimization has been performed
by using genetic algorithm toolbox in Matlab software. Because of
decreasing moving elements, it is expected much more better
dynamic performance with respect to other counterpart mechanisms
with the same degrees of freedom. In addition, using couple of
cylindrical and revolute joints increased mechanism ability to have
more extended workspace.
Abstract: Response surface methodology (RSM) is a very
efficient tool to provide a good practical insight into developing new
process and optimizing them. This methodology could help
engineers to raise a mathematical model to represent the behavior of
system as a convincing function of process parameters.
Through this paper the sequential nature of the RSM surveyed for process
engineers and its relationship to design of experiments (DOE), regression
analysis and robust design reviewed. The proposed four-step procedure in
two different phases could help system analyst to resolve the parameter
design problem involving responses. In order to check accuracy of the
designed model, residual analysis and prediction error sum of squares
(PRESS) described.
It is believed that the proposed procedure in this study can resolve a
complex parameter design problem with one or more responses. It can be
applied to those areas where there are large data sets and a number of
responses are to be optimized simultaneously. In addition, the proposed
procedure is relatively simple and can be implemented easily by using
ready-made standard statistical packages.
Abstract: Earth reinforcing techniques have become useful and economical to solve problems related to difficult grounds and provide satisfactory foundation performance. In this context, this paper uses radial basis function neural network (RBFNN) for predicting the bearing pressure of strip footing on reinforced granular bed overlying weak soil. The inputs for the neural network models included plate width, thickness of granular bed and number of layers of reinforcements, settlement ratio, water content, dry density, cohesion and angle of friction. The results indicated that RBFNN model exhibited more than 84 % prediction accuracy, thereby demonstrating its application in a geotechnical problem.
Abstract: Numerical studies have been carried out using a
validated two-dimensional RNG k-epsilon turbulence model for the
design optimization of a thrust vector control system using shock
induced supersonic secondary jet. Parametric analytical studies have
been carried out with various secondary jets at different divergent
locations, jet interaction angles, jet pressures. The results from the
parametric studies of the case on hand reveal that the primary nozzle
with a small divergence angle, downstream injections with a distance
of 2.5 times the primary nozzle throat diameter from the primary
nozzle throat location warrant higher efficiency over a certain range
of jet pressures and jet angles. We observed that the supersonic
secondary jet opposing the core flow with jets interaction angle of
40o to the axis far downstream of the nozzle throat facilitates better
thrust vectoring than the secondary jet with same direction as that of
core flow with various interaction angles. We concluded that fixing
of the supersonic secondary jet nozzle pointing towards the throat
direction with suitable angle at a distance 2 to 4 times of the primary
nozzle throat diameter, as the case may be, from the primary nozzle
throat location could facilitate better thrust vectoring for the
supersonic aerospace vehicles.
Abstract: The optimal grid spacing and turbulence model for the
2D numerical analysis of a vertical-axis water turbine (VAWaterT)
operating in a 2 m/s freestream current has been investigated. The
results of five different spatial domain discretizations and two
turbulence models (k-ω SST and k-ε RNG) have been compared, in
order to gain the optimal y+ parameter distribution along the blade
walls during a full rotor revolution. The resulting optimal mesh has
appeared to be quite similar to that obtained for the numerical
analysis of a vertical-axis wind turbine.
Abstract: BER analysis of Impulse Radio Ultra Wideband (IRUWB) pulse modulations over S-V channel model is proposed in this paper. The UWB pulse is Gaussian monocycle pulse modulated using Pulse Amplitude Modulation (PAM) and Pulse Position Modulation (PPM). The channel model is generated from a modified S-V model. Bit-error rate (BER) is measured over several of bit rates. The result shows that all modulation are appropriate for both LOS and NLOS channel, but PAM gives better performance in bit rates and SNR. Moreover, as standard of speed has been given for UWB, the communication is appropriate with high bit rates in LOS channel.
Abstract: Many-core GPUs provide high computing ability and
substantial bandwidth; however, optimizing irregular applications
like SpMV on GPUs becomes a difficult but meaningful task. In this
paper, we propose a novel method to improve the performance of
SpMV on GPUs. A new storage format called HYB-R is proposed to
exploit GPU architecture more efficiently. The COO portion of the
matrix is partitioned recursively into a ELL portion and a COO
portion in the process of creating HYB-R format to ensure that there
are as many non-zeros as possible in ELL format. The method of
partitioning the matrix is an important problem for HYB-R kernel, so
we also try to tune the parameters to partition the matrix for higher
performance. Experimental results show that our method can get
better performance than the fastest kernel (HYB) in NVIDIA-s
SpMV library with as high as 17% speedup.
Abstract: Autism spectrum disorder is characterized by
abnormalities in social communication, language abilities and
repetitive behaviors. The present study focused on some grammatical
deficits in autistic children. We evaluated the impairment of correct
use of different Persian verb tenses in autistic children-s speech. Two
standardized Language Test were administered then gathered data
were analyzed. The main result of this study was significant
difference between the mean scores of correct responses to present
tense in comparison with past tense in Persian language. This study
demonstrated that tense is severely impaired in autistic children-s
speech. Our findings indicated those autistic children-s production of
simple present/ past tense opposition to be better than production of
future and past periphrastic forms (past perfect, present perfect, past
progressive).
Abstract: This study introduces a new method for detecting,
sorting, and localizing spikes from multiunit EEG recordings. The
method combines the wavelet transform, which localizes distinctive
spike features, with Super-Paramagnetic Clustering (SPC) algorithm,
which allows automatic classification of the data without assumptions
such as low variance or Gaussian distributions. Moreover, the method
is capable of setting amplitude thresholds for spike detection. The
method makes use of several real EEG data sets, and accordingly the
spikes are detected, clustered and their times were detected.
Abstract: Recently, many web services to provide information for public transport are developed and released. They are optimized for mobile devices such a smartphone. We are also developing better path planning system for route buses and trains called “Bus-Net"[1]. However these systems only provide paths and related information before the user start moving. So we propose a context aware navigation to change the way to support public transport users. If we go to somewhere using many kinds of public transport, we have to know how to use them. In addition, public transport is dynamic system, and these have different characteristic by type. So we need information at real-time. Therefore we suggest the system that can support on user-s state. It has a variety of ways to help public transport users by each state, like turn-by-turn navigation. Context aware navigation will be able to reduce anxiety for using public transport.
Abstract: Background noise is particularly damaging to speech
intelligibility for people with hearing loss especially for sensorineural
loss patients. Several investigations on speech intelligibility have
demonstrated sensorineural loss patients need 5-15 dB higher SNR
than the normal hearing subjects. This paper describes Discrete
Cosine Transform Power Normalized Least Mean Square algorithm
to improve the SNR and to reduce the convergence rate of the LMS
for Sensory neural loss patients. Since it requires only real arithmetic,
it establishes the faster convergence rate as compare to time domain
LMS and also this transformation improves the eigenvalue
distribution of the input autocorrelation matrix of the LMS filter.
The DCT has good ortho-normal, separable, and energy compaction
property. Although the DCT does not separate frequencies, it is a
powerful signal decorrelator. It is a real valued function and thus
can be effectively used in real-time operation. The advantages of
DCT-LMS as compared to standard LMS algorithm are shown via
SNR and eigenvalue ratio computations. . Exploiting the symmetry
of the basis functions, the DCT transform matrix [AN] can be
factored into a series of ±1 butterflies and rotation angles. This
factorization results in one of the fastest DCT implementation. There
are different ways to obtain factorizations. This work uses the fast
factored DCT algorithm developed by Chen and company. The
computer simulations results show superior convergence
characteristics of the proposed algorithm by improving the SNR at
least 10 dB for input SNR less than and equal to 0 dB, faster
convergence speed and better time and frequency characteristics.
Abstract: Stirred tanks have applications in many chemical
processes where mixing is important for the overall performance of
the system. In present work 5%v of the tank is filled by solid particles
with diameter of 700 m that Rushton Turbine and Propeller impeller
is used for stirring. An Eulerian-Eulerian Multi Fluid Model coupled
and for modeling rotating of impeller, moving reference frame
(MRF) technique was used and standard-k- model was selected for
turbulency. Flow field, radial velocity and axial distribution of solid
for both of impellers was investigation and comparison. Comparisons
of simulation results between Rushton Turbine and propeller impeller
shows that final quality of solid-liquid slurry in different rotating
speed for propeller impeller is better than the Rushton Turbine.
Abstract: Different methods containing biometric algorithms are
presented for the representation of eigenfaces detection including
face recognition, are identification and verification. Our theme of this
research is to manage the critical processing stages (accuracy, speed,
security and monitoring) of face activities with the flexibility of
searching and edit the secure authorized database. In this paper we
implement different techniques such as eigenfaces vector reduction
by using texture and shape vector phenomenon for complexity
removal, while density matching score with Face Boundary Fixation
(FBF) extracted the most likelihood characteristics in this media
processing contents. We examine the development and performance
efficiency of the database by applying our creative algorithms in both
recognition and detection phenomenon. Our results show the
performance accuracy and security gain with better achievement than
a number of previous approaches in all the above processes in an
encouraging mode.
Abstract: The rapid growth of e-Commerce services is
significantly observed in the past decade. However, the method to
verify the authenticated users still widely depends on numeric
approaches. A new search on other verification methods suitable for
online e-Commerce is an interesting issue. In this paper, a new online
signature-verification method using angular transformation is
presented. Delay shifts existing in online signatures are estimated by
the estimation method relying on angle representation. In the
proposed signature-verification algorithm, all components of input
signature are extracted by considering the discontinuous break points
on the stream of angular values. Then the estimated delay shift is
captured by comparing with the selected reference signature and the
error matching can be computed as a main feature used for verifying
process. The threshold offsets are calculated by two types of error
characteristics of the signature verification problem, False Rejection
Rate (FRR) and False Acceptance Rate (FAR). The level of these two
error rates depends on the decision threshold chosen whose value is
such as to realize the Equal Error Rate (EER; FAR = FRR). The
experimental results show that through the simple programming,
employed on Internet for demonstrating e-Commerce services, the
proposed method can provide 95.39% correct verifications and 7%
better than DP matching based signature-verification method. In
addition, the signature verification with extracting components
provides more reliable results than using a whole decision making.