Abstract: This paper discusses the issues and challenge that
academia faced in knowledge sharing at a research university in
Malaysia. The partial results of interview are presented from the
actual study. The main issues in knowledge sharing practices are
university structure and designation and title. The academia
awareness in sharing knowledge is also influenced by culture. Our
investigation highlight that the concept of reciprocal relationship of
sharing knowledge may hinder knowledge sharing awareness among
academia. Hence, we concluded that further investigation could be
carried out on the social interaction and trust culture among academia
in sharing knowledge within research/ranking university
environment.
Abstract: Researchers of drug-drug interaction alert systems
have often suggested that there were high overridden rate for alerts and
also too false alerts. However, research about decreasing false alerts is
scant. Therefore, the aim of this article attempts to proactive
identification of false alert for drug-drug interaction and provide
solution to decrease false alerts. This research involved retrospective
analysis prescribing database and calculated false alert rate by using
MYSQL and JAVA. Results of this study showed 17% of false alerts
and the false alert rate in the hospitals (37%) was more than in the
clinics. To conclude, this study described the importance that
drug-drug interaction alert system should not only detect drug name
but also detect frequency or route, as well as in providing solution to
decrease false alerts.
Abstract: KREISIG is a computer simulation program, firstly developed by Munawar (1994) in Germany to optimize signalized roundabout. The traffic movement is based on the car following theory. Turbine method has been implemented for signal setting. The program has then been further developed in Indonesia to meet the traffic characteristics in Indonesia by adjusting the sensitivity of the drivers. Trial and error method has been implemented to adjust the saturation flow. The saturation flow output has also been compared to the calculation method according to 1997 Indonesian Highway Capacity Manual. It has then been implemented to optimize signalized roundabout at Kleringan roundabout in Malioboro area, Yogyakarta, Indonesia. It is found that this method can optimize the signal setting of this roundabout. Therefore, it is recommended to use this program to optimize signalized roundabout.
Abstract: Unified Modeling Language (UML) is a standard
language for modeling of a system. UML is used to visually specify
the structure and behavior of a system. The system requirements are
captured and then converted into UML specification. UML
specification uses a set of rules and notations, and diagrams to
specify the system requirements. In this paper, we present a tool for
developing the UML specification. The tool will ease the use of the
notations and diagrams for UML specification as well as increase the
understanding and familiarity of the UML specification. The tool will
also be able to check the conformance of the diagrams against each
other for basic compliance of UML specification.
Abstract: Parsing is important in Linguistics and Natural
Language Processing to understand the syntax and semantics of a
natural language grammar. Parsing natural language text is
challenging because of the problems like ambiguity and inefficiency.
Also the interpretation of natural language text depends on context
based techniques. A probabilistic component is essential to resolve
ambiguity in both syntax and semantics thereby increasing accuracy
and efficiency of the parser. Tamil language has some inherent
features which are more challenging. In order to obtain the solutions,
lexicalized and statistical approach is to be applied in the parsing
with the aid of a language model. Statistical models mainly focus on
semantics of the language which are suitable for large vocabulary
tasks where as structural methods focus on syntax which models
small vocabulary tasks. A statistical language model based on Trigram
for Tamil language with medium vocabulary of 5000 words has
been built. Though statistical parsing gives better performance
through tri-gram probabilities and large vocabulary size, it has some
disadvantages like focus on semantics rather than syntax, lack of
support in free ordering of words and long term relationship. To
overcome the disadvantages a structural component is to be
incorporated in statistical language models which leads to the
implementation of hybrid language models. This paper has attempted
to build phrase structured hybrid language model which resolves
above mentioned disadvantages. In the development of hybrid
language model, new part of speech tag set for Tamil language has
been developed with more than 500 tags which have the wider
coverage. A phrase structured Treebank has been developed with 326
Tamil sentences which covers more than 5000 words. A hybrid
language model has been trained with the phrase structured Treebank
using immediate head parsing technique. Lexicalized and statistical
parser which employs this hybrid language model and immediate
head parsing technique gives better results than pure grammar and
trigram based model.
Abstract: The study explored the question of who am I? As a (re)construction of cultural identity by delving into globalization, communication, and social change in Malta during a historical moment when Malta became a European Union Member State. Three objectives guided this qualitative study. Firstly the study reviewed European Union (EU) policies that regulate broadcasting and their implementation in Member States, whilst meeting the challenges of globalization and new media technology. Secondly the research investigated the changes of the media landscape via organizational structures, programs and television (TV) content. Finally the study explored the impact of these transformations taking place in the way Maltese live as they (re)construct their cultural identity. Despite the choices available to the Maltese audience, old local traditions and new foreign customs coexist as informants continue to (re)construct their cultural identity and define who they are.
Abstract: This paper presents the results of a study aimed at
establishing the temperature distribution during the welding of
magnesium alloy sheets by Pulsed Current Gas Tungsten Arc
Welding (PCGTAW) and Constant Current Gas Tungsten Arc
Welding (CCGTAW) processes. Pulsing of the GTAW welding
current influences the dimensions and solidification rate of the fused
zone, it also reduces the weld pool volume hence a narrower bead. In
this investigation, the base material considered was 2mm thin AZ 31
B magnesium alloy, which is finding use in aircraft, automobile and
high-speed train components. A finite element analysis was carried
out using ANSYS, and the results of the FEA were compared with
the experimental results. It is evident from this study that the finite
element analysis using ANSYS can be effectively used to model
PCGTAW process for finding temperature distribution.
Abstract: To improve the material characteristics of single- and
poly-crystals of pure copper, the respective relationships between crystallographic orientations and microstructures, and the bending and mechanical properties were examined. And texture distribution is also
analyzed. A grain refinement procedure was performed to obtain a
grained structure. Furthermore, some analytical results related to
crystal direction maps, inverse pole figures, and textures were obtained from SEM-EBSD analyses. Results showed that these
grained metallic materials have peculiar springback characteristics with various bending angles.
Abstract: One of the most important aspects expected from ERP systems is to integrate various operations existing in administrative, financial, commercial, human resources, and production departments of the consumer organization. Also, it is often needed to integrate the new ERP system with the organization legacy systems when implementing the ERP package in the organization. Without relying on an appropriate software architecture to realize the required integration, ERP implementation processes become error prone and time consuming; in some cases, the ERP implementation may even encounters serious risks. In this paper, we propose a new architecture that is based on the agent oriented vision and supplies the integration expected from ERP systems using several independent but cooperator agents. Besides integration which is the main issue of this paper, the presented architecture will address some aspects of intelligence and learning capabilities existing in ERP systems
Abstract: Understanding the consumption and production of
various metabolites of fibroblast conditioned media is needed for its
proper and optimized use in expansion of pluripotent stem cells. For
this purpose, we have used the HPLC method to analyse the
consumption of glucose and the production of lactate over time by
mouse embryonic fibroblasts. The experimental data have also been
compared with mathematical model fits. 0.025 moles of lactate was
produced after 72 hrs while the glucose concentration decreased from
0.017 moles to 0.011 moles. The mathematical model was able to
predict the trends of glucose consumption and lactate production.
Abstract: In this study we investigate the insertion of
pioglitazone, a Thiazolidinedione, into the two different sizes of
Carbon nanotub. It was shown that the insertion of pioglitazone into
the carbon nanotube in a water solute environment could be related
to the diameter of the nanotube and in the flow of the waters via
hydrophilic interactions. This encapsulated drug-carbon nanotube
molecule can be further applicable in other investigations in target
therapy with these agents regarding to reduce their potential toxic
effects.
Abstract: Decentralized eco-sanitation system is a promising and sustainable mode comparing to the century-old centralized conventional sanitation system. The decentralized concept relies on an environmentally and economically sound management of water, nutrient and energy fluxes. Source-separation systems for urban waste management collect different solid waste and wastewater streams separately to facilitate the recovery of valuable resources from wastewater (energy, nutrients). A resource recovery centre constituted for 20,000 people will act as the functional unit for the treatment of urban waste of a high-density population community, like Singapore. The decentralized system includes urine treatment, faeces and food waste co-digestion, and horticultural waste and organic fraction of municipal solid waste treatment in composting plants. A design model is developed to estimate the input and output in terms of materials and energy. The inputs of urine (yellow water, YW) and faeces (brown water, BW) are calculated by considering the daily mean production of urine and faeces by humans and the water consumption of no-mix vacuum toilet (0.2 and 1 L flushing water for urine and faeces, respectively). The food waste (FW) production is estimated to be 150 g wet weight/person/day. The YW is collected and discharged by gravity into tank. It was found that two days are required for urine hydrolysis and struvite precipitation. The maximum nitrogen (N) and phosphorus (P) recovery are 150-266 kg/day and 20-70 kg/day, respectively. In contrast, BW and FW are mixed for co-digestion in a thermophilic acidification tank and later a decentralized/centralized methanogenic reactor is used for biogas production. It is determined that 6.16-15.67 m3/h methane is produced which is equivalent to 0.07-0.19 kWh/ca/day. The digestion residues are treated with horticultural waste and organic fraction of municipal waste in co-composting plants.
Abstract: This paper provides an analysis of corporate income
tax (CIT) incentives in the Western Balkan countries: Slovenia,
Croatia, Serbia, Montenegro, Macedonia and Albania. Western
Balkan countries, as other transition and developing countries, use
large number of the corporate income tax incentives (CIT) to attract
foreign investments and to stimulate economic activity. The main
goal of this paper is to investigate how often these countries use CIT
incentives and provide review of existing tax incentives in Western
Balkan countries. Paper will focus on reduced CIT rates, tax
holidays, and other investment incentives which imply incentives
like accelerated depreciation, tax allowances and tax credits.
Abstract: In this study, workplace environmental monitoring
systems were established using USN(Ubiquitous Sensor Networks)
and LabVIEW. Although existing direct sampling methods enable
finding accurate values as of the time points of measurement, those
methods are disadvantageous in that continuous management and
supervision are difficult and costs for are high when those methods are
used. Therefore, the efficiency and reliability of workplace
management by supervisors are relatively low when those methods are
used. In this study, systems were established so that information on
workplace environmental factors such as temperatures, humidity and
noises is measured and transmitted to the PC in real time to enable
supervisors to monitor workplaces through LabVIEW on the PC.
When any accidents have occurred in workplaces, supervisors can
immediately respond through the monitoring system and this system
enables integrated workplace management and the prevention of
safety accidents. By introducing these monitoring systems, safety
accidents due to harmful environmental factors in workplaces can be
prevented and these monitoring systems will be also helpful in finding
out the correlation between safety accidents and occupational diseases
by comparing and linking databases established by this monitoring
system with existing statistical data.
Abstract: In order to research Internet quantificationally and
better model the performance of network, this paper proposes a novel
AS level network performance model (MNPM), it takes autonomous
system (AS) as basic modeling unit, measures E2E performance
between any two outdegrees of an AS and organizes measurement
results into matrix form which called performance matrix (PM).
Inter-AS performance calculation is defined according to performance
information stored in PM. Simulation has been implemented to verify
the correctness of MNPM and a practical application of MNPM
(network congestion detection) is given.
Abstract: This paper presents a generalized formulation for the
problem of buckling optimization of anisotropic, radially graded,
thin-walled, long cylinders subject to external hydrostatic pressure.
The main structure to be analyzed is built of multi-angle fibrous
laminated composite lay-ups having different volume fractions of the
constituent materials within the individual plies. This yield to a
piecewise grading of the material in the radial direction; that is the
physical and mechanical properties of the composite material are
allowed to vary radially. The objective function is measured by
maximizing the critical buckling pressure while preserving the total
structural mass at a constant value equals to that of a baseline
reference design. In the selection of the significant optimization
variables, the fiber volume fractions adjoin the standard design
variables including fiber orientation angles and ply thicknesses. The
mathematical formulation employs the classical lamination theory,
where an analytical solution that accounts for the effective axial and
flexural stiffness separately as well as the inclusion of the coupling
stiffness terms is presented. The proposed model deals with
dimensionless quantities in order to be valid for thin shells having
arbitrary thickness-to-radius ratios. The critical buckling pressure
level curves augmented with the mass equality constraint are given
for several types of cylinders showing the functional dependence of
the constrained objective function on the selected design variables. It
was shown that material grading can have significant contribution to
the whole optimization process in achieving the required structural
designs with enhanced stability limits.
Abstract: This paper is concerned with the application of small
rating Capacitive Energy Storage units for the improvement of
Automatic Generation Control of a multiunit multiarea power
system. Generation Rate Constraints are also considered in the
investigations. Integral Squared Error technique is used to obtain the
optimal integral gain settings by minimizing a quadratic performance
index. Simulation studies reveal that with CES units, the deviations
in area frequencies and inter-area tie-power are considerably
improved in terms of peak deviations and settling time as compared
to that obtained without CES units.
Abstract: E-Appointment Scheduling (EAS) has been developed
to handle appointment for UMP students, lecturers in Faculty of
Computer Systems & Software Engineering (FCSSE) and Student
Medical Center. The schedules are based on the timetable and
university activities. Constraints Logic Programming (CLP) has been
implemented to solve the scheduling problems by giving
recommendation to the users in part of determining any available
slots from the lecturers and doctors- timetable. By using this system,
we can avoid wasting time and cost because this application will set
an appointment by auto-generated. In addition, this system can be an
alternative to the lecturers and doctors to make decisions whether to
approve or reject the appointments.
Abstract: The mosaicing technique has been employed in more and more application fields, from entertainment to scientific ones. In the latter case, often the final evaluation is still left to human beings, that assess visually the quality of the mosaic. Many times, a lack of objective measurements in microscopic mosaicing may prevent the mosaic from being used as a starting image for further analysis. In this work we analyze three different metrics and indexes, in the domain of signal analysis, image analysis and visual quality, to measure the quality of different aspects of the mosaicing procedure, such as registration errors and visual quality. As the case study we consider the mosaicing algorithm we developed. The experiments have been carried out by considering mosaics with very different features: histological samples, that are made of detailed and contrasted images, and live stem cells, that show a very low contrast and low detail levels.
Abstract: Recently, the advanced technologies that offer high
precision product, relative easy, economical process and also rapid
production are needed to realize the high demand of ultra precision
micro part. In our research, micromanufacturing based on soft
lithography and nanopowder injection molding was investigated. The
silicone metal pattern with ultra thick and high aspect ratio succeeds to
fabricate Polydimethylsiloxane (PDMS) micro mold. The process
followed by nanopowder injection molding (PIM) by a simple vacuum
hot press. The 17-4ph nanopowder with diameter of 100 nm, succeed
to be injected and it forms green sample microbearing with thickness,
microchannel and aspect ratio is 700μm, 60μm and 12, respectively.
Sintering process was done in 1200 C for 2 hours and heating rate
0.83oC/min. Since low powder load (45% PL) was applied to achieve
green sample fabrication, ~15% shrinkage happen in the 86% relative
density. Several improvements should be done to produce high
accuracy and full density sintered part.