Abstract: This paper explores the effects of gamification on
lower secondary school students’ motivation and engagement in the
classroom. Two-group posttest-only experimental design were
employed to study the influence of gamification teaching method
(GTM) when compared with conventional teaching method (CTM)
on 60 lower secondary school students. The Student Engagement
Instrument (SEI) and Intrinsic Motivation Inventory (IMI) were used
to assess students’ intrinsic motivation and engagement level towards
the respective teaching method. Finding indicates that students who
completed the GTM lesson were significantly higher in intrinsic
motivation to learn than those from the CTM. Although the result
were insignificant and only marginal difference in the engagement
mean, GTM still show better potential in raising student’s
engagement in class when compared with CTM. This finding proves
that the GTM is likely to solve the current issue of low motivation to
learn and low engagement in class among lower secondary school
students in Malaysia. On the other hand, despite being not significant,
higher mean indicates that CTM positively contribute to higher peer
support for learning and better teacher and student relationship when
compared with GTM. As a conclusion, gamification approach is
flexible and can be adapted into many learning content to enhance the
intrinsic motivation to learn and to some extent, encourage better
student engagement in class.
Abstract: A study was conducted to determine the diversity and
abundance of shorebird species habituating the mudflat area of Jeram
Beach and Remis Beach, Selangor, Peninsular Malaysia. Direct
observation technique (using binoculars and video camera) was
applied to record the presence of bird species in the sampling sites
from August 2013 until July 2014. A total of 32 species of shorebird
were recorded during both migratory and non-migratory seasons. Of
these, eleven species (48%) are migrants, six species (26%) have both
migrant and resident populations, four species (17%) are vagrants and
two species (9%) are residents. The compositions of the birds
differed significantly in all months (χ2 = 84.35, p < 0.001). There is a
significant difference in avian abundance between migratory and
non-migratory seasons (Mann-Whitney, t = 2.39, p = 0.036). The
avian abundance were differed significantly in Jeram and Remis
Beaches during migratory periods (t = 4.39, p = 0.001) but not during
non-migratory periods (t = 0.78, p = 0.456). Shorebird diversity was
also affected by tidal cycle. There is a significance difference
between high tide and low tide (Mann-Whitney, t = 78.0, p < 0.005).
Frequency of disturbance also affected the shorebird distribution
(Mann-Whitney, t = 57.0, p = 0.0134). Therefore, this study
concluded that tides and disturbances are two factors that affecting
temporal distribution of shorebird in mudflats area.
Abstract: Recent concerns about the value of teaching cursive
handwriting in the classroom are based on the belief that cursive
handwriting or penmanship is an outdated and unnecessary skill in
today’s online world. The discussion of this issue begins with a
description of current initiatives to eliminate handwriting instruction
in schools. This is followed by a brief history of cursive writing
through the ages. Next considered is a description of its benefits as a
preliminary process for younger children as compared with
immediate instruction in keyboarding, particularly in the areas of
vision, cognition, motor skills and automatic fluency. Also
considered, is cursive’s companion, paper itself, and the impact of a
paperless, “screen and keyboard” environment. The discussion
concludes with a consideration of the unique contributions of cursive
and keyboarding as written forms of communication, along with their
respective surfaces, paper and screen. Finally, an assessment of the
practical utility of each skill is followed by an informal assessment of
what is lost and what remains as we move from a predominantly
paper and pen world of handwriting to texting and keyboarding in an
environment of screens.
Abstract: Nonstandard tests are necessary for analyses and
verification of new developed structural and technological solutions
with application of composite materials. One of the most critical
primary structural parts of a typical aerospace structure is T-joint.
This structural element is loaded mainly in shear, bending, peel and
tension. The paper is focused on the shear loading simulations. The
aim of the work is to obtain a representative uniform distribution of
shear loads along T-joint during the mechanical testing. A new
design of T-joint test procedure, numerical simulation and
optimization of representative boundary conditions are presented.
The different conditions and inaccuracies both in simulations and
experiments are discussed. The influence of different parameters on
stress and strain distributions is demonstrated on T-joint made of
CFRP (carbon fibre reinforced plastic). A special test rig designed by
VZLU (Aerospace Research and Test Establishment) for T-shear test
procedure is presented.
Abstract: This paper considers the characterization of a complex
electromagnetic environment due to multiple sources of
electromagnetic radiation as a five-dimensional surface which can be
described by a set of several surface sections including: instant EM
field intensity distribution maps at a given frequency and altitude,
instantaneous spectrum at a given location in space and the time
evolution of the electromagnetic field spectrum at a given point in
space. This characterization if done over time can enable the
exposure levels of Radio Frequency Radiation at every point in the
analysis area to be determined and results interpreted based on
comparison of the determined RFR exposure level with the safe
guidelines for general public exposure given by recognized body
such as the International commission on non-ionizing radiation
protection (ICNIRP), Institute of Electrical and Electronic Engineers
(IEEE), the National Radiation Protection Authority (NRPA).
Abstract: In this paper the effect of wall waviness of side walls
in a two-dimensional wavy enclosure is numerically investigated.
Two vertical wavy walls and straight top wall are kept isothermal and
the bottom wall temperature is higher and spatially varying with
cosinusoidal temperature distribution. A computational code based on
Finite-volume approach is used to solve governing equations and
SIMPLE method is used for pressure velocity coupling. Test is
performed for several different numbers of undulations. The Prandtl
number was kept constant and the Ra number denotes that the flow is
laminar. Temperature and velocity fields are determined. Therefore,
according to the obtained results a correlation is proposed for average
Nusselt number as a function of number of side wall waves. The
results indicate that the Nusselt number is highly affected by number
of waves and increasing it decreases the wavy walls Nusselt number;
although the Nusselt number is not highly affected by surface
waviness when the number of undulations is below one.
Abstract: The article discusses multimodal mobility in
contemporary societies as a main planning and organization issue in
the functioning of administrative bodies, a problem which really
exists in the space of contemporary cities in terms of shaping modern
transport systems. The article presents classification of available
resources and initiatives undertaken for developing multimodal
mobility. Solutions can be divided into three groups of measures –
physical measures in the form of changes of the transport network
infrastructure, organizational ones (including transport policy) and
information measures. The latter ones include in particular direct
support for people travelling in the transport network by providing
information about ways of using available means of transport. A
special measure contributing to this end is a trip planner. The article
compares several selected planners. It includes a short description of
the Green Travelling Project, which aims at developing a planner
supporting environmentally friendly solutions in terms of transport
network operation. The article summarizes preliminary findings of
the project.
Abstract: In this paper, design of solid-state battery/supercapacitor emulator based on dc-dc boost converter is described.
The emulator mimics charging behavior of any storage device based
on a predefined behavior set by the user. The device is operated by a
two-level control structure: high-level emulating controller and low-
level input voltage controller. Simulation and experimental results are
shown to demonstrate the emulator operation.
Abstract: Innovations not only contribute to competitiveness of
the company but have also positive effects on revenues. On average,
product innovations account to 14 percent of companies’ sales.
Innovation management has substantially changed during the last
decade, because of growing reliance on external partners. As a
consequence, a new task for purchasing arises, as firms need to
understand which suppliers actually do have high potential
contributing to the innovativeness of the firm and which do not.
Proper organization of the purchasing function is important since
for the majority of manufacturing companies deal with substantial
material costs which pass through the purchasing function. In the past
the purchasing function was largely seen as a transaction-oriented,
clerical function but today purchasing is the intermediate with supply
chain partners contributing to innovations, be it product or process
innovations. Therefore, purchasing function has to be organized
differently to enable firm innovation potential.
However, innovations are inherently risky. There are behavioral
risk (that some partner will take advantage of the other party),
technological risk in terms of complexity of products and processes
of manufacturing and incoming materials and finally market risks,
which in fact judge the value of the innovation. These risks are
investigated in this work. Specifically, technological risks which deal
with complexity of the products, and processes will be investigated
more thoroughly. Buying components or such high edge technologies
necessities careful investigation of technical features and therefore is
usually conducted by a team of experts. Therefore it is hypothesized
that higher the technological risk, higher will be the centralization of
the purchasing function as an interface with other supply chain
members.
Main contribution of this research lies is in the fact that analysis
was performed on a large data set of 1493 companies, from 25
countries collected in the GMRG 4 survey. Most analyses of
purchasing function are done by case study analysis of innovative
firms. Therefore this study contributes with empirical evaluations that
can be generalized.
Abstract: In this study, we develop a performance evaluation
model based on a multi-attribute utility approach aiming at reaching
the sustainable banking (SB) status. This model is built accounting
for various banks’ stakeholders in a win-win paradigm. In addition, it
offers the opportunity for adopting a global measure of performance
as an indication of a bank’s sustainability degree. This measure is
referred to as banking sustainability performance index (BSPI). This
index may constitute a basis for ranking banks. Moreover, it may
constitute a bridge between the assessment types of financial and
extra-financial rating agencies. A real application is performed on
three French banks.
Abstract: The theoretical approach is developed to describe the
change of drops in the atmosphere of own steam and buffer gas under
irradiation. It is shown that the irradiation influences on size of stable
droplet and on the conditions under which the droplet exists. Under
irradiation the change of drop becomes more complex: the not
monotone and periodical change of size of drop becomes possible.
All possible solutions are represented by means of phase portrait. It is
found all qualitatively different phase portraits as function of critical
parameters: rate generation of clusters and substance density.
Abstract: The use of IT equipment has become a part of every
day. However, each device that is part of cyberspace should be
secured against unauthorized use. It is very important to know the
basics of these security devices, but also the basics of safe conduct
their owners. This information should be part of every curriculum
computer science education in primary and secondary schools.
Therefore, the work focuses on the education of pupils in primary and
secondary schools on the Internet. Analysis of the current state
describes approaches to the education of pupils in security issues on
the Internet. The paper presents a questionnaire-based survey which
was carried out in the Czech Republic, whose task was to ascertain
the level of opinion pupils in primary and secondary schools on the
issue of communication in social networks. The research showed that
awareness of socio-pathological phenomena on the Internet
environment is very low. Based on the results it was proposed
appropriate ways of teaching to this issue and its inclusion a proposal
of curriculum for primary and secondary schools.
Abstract: The paper is focused on the methods to solutions of
the crisis situation in the Czech Republic associated with the mass
methanol poisoning. The emphasis is put on tasks of individual state
bodies and of Integrated Rescue System during the handling of the
crisis.
The theoretical part describes poisonings, ways of intoxication,
types of intoxicants and cases of mass poisoning by dangerous
substances in the world.
The practical part describes the development, causes and solutions
of extraordinary event, mass methanol poisoning in the Czech
Republic. The main emphasis was put on the crisis management of
the Czech Republic in solving this situation.
Abstract: Characterization of the engineering behavior of
unsaturated soil is dependent on the soil-water characteristic curve
(SWCC), a graphical representation of the relationship between water
content or degree of saturation and soil suction. A reasonable
description of the SWCC is thus important for the accurate prediction
of unsaturated soil parameters. The measurement procedures for
determining the SWCC, however, are difficult, expensive, and timeconsuming.
During the past few decades, researchers have laid a
major focus on developing empirical equations for predicting the
SWCC, with a large number of empirical models suggested. One of
the most crucial questions is how precisely existing equations can
represent the SWCC. As different models have different ranges of
capability, it is essential to evaluate the precision of the SWCC
models used for each particular soil type for better SWCC estimation.
It is expected that better estimation of SWCC would be achieved via
a thorough statistical analysis of its distribution within a particular
soil class. With this in view, a statistical analysis was conducted in
order to evaluate the reliability of the SWCC prediction models
against laboratory measurement. Optimization techniques were used
to obtain the best-fit of the model parameters in four forms of SWCC
equation, using laboratory data for relatively coarse-textured (i.e.,
sandy) soil. The four most prominent SWCCs were evaluated and
computed for each sample. The result shows that the Brooks and
Corey model is the most consistent in describing the SWCC for sand
soil type. The Brooks and Corey model prediction also exhibit
compatibility with samples ranging from low to high soil water
content in which subjected to the samples that evaluated in this study.
Abstract: Web-based Cognitive Writing Instruction (WeCWI) is
a hybrid e-framework for the development of a web-based instruction
(WBI), which contributes towards instructional design and language
development. WeCWI divides its contribution in instructional design
into macro and micro perspectives. In macro perspective, being a 21st
century educator by disseminating knowledge and sharing ideas with
the in-class and global learners is initiated. By leveraging the virtue
of technology, WeCWI aims to transform an educator into an
aggregator, curator, publisher, social networker and ultimately, a
web-based instructor. Since the most notable contribution of
integrating technology is being a tool of teaching as well as a
stimulus for learning, WeCWI focuses on the use of contemporary
web tools based on the multiple roles played by the 21st century
educator. The micro perspective in instructional design draws
attention to the pedagogical approaches focusing on three main
aspects: reading, discussion, and writing. With the effective use of
pedagogical approaches through free reading and enterprises,
technology adds new dimensions and expands the boundaries of
learning capacity. Lastly, WeCWI also imparts the fundamental
theories and models for web-based instructors’ awareness such as
interactionist theory, cognitive information processing (CIP) theory,
computer-mediated communication (CMC), e-learning interactionalbased
model, inquiry models, sensory mind model, and leaning styles
model.
Abstract: This paper involved the performance of a hightemperature
X-Ray powder diffraction analysis (XRD) of a sample of
chemical gypsum generated in the production of titanium white; this
gypsum originates by neutralizing highly acidic water with limestone
suspension. Specifically, it was gypsum formed in the first stage of
neutralization when the resulting material contains, apart from
gypsum, a number of waste products resulting from the
decomposition of ilmenite by sulphuric acid. So it can be described as
red titanogypsum. By conducting the experiment using XRD
apparatus Bruker D8 Advance with a Cu anode (λkα=1.54184 Å)
equipped with high-temperature chamber Anton Paar HTK 16, it was
possible to identify clearly in the sample each phase transition in the
system of CaSO4·xH2O.
Abstract: This article presents a new vibration diagnostic
method designed to (PM) machines with permanent magnets. Those
devices are commonly used in small wind and water systems or
vehicles drives. The author’s method is very innovative and unique.
Specific structural properties of PM machines are used in this method
- electromotive force (EMF) generated due to vibrations. There was
analysed number of publications which describe vibration diagnostic
methods and tests of electrical PM machines and there was no
method found to determine the technical condition of such machine
basing on their own signals. In this article will be discussed: the
method genesis, the similarity of machines with permanent magnet to
vibration sensor and simulation and laboratory tests results. The
method of determination the technical condition of electrical machine
with permanent magnets basing on its own signals is the subject of
patent application and it is the main thesis of author’s doctoral
dissertation.
Abstract: The majority of contemporary insulation materials
commonly used in the building industry is made from non-renewable
raw materials; furthermore, their production often brings high energy
costs. A long-term trend as far as sustainable development is
concerned has been the reduction of energy and material demands of
building material production. One of the solutions is the possibility of
using easily renewable natural raw material sources which are
considerably more ecological and their production is mostly less
energy-consuming compared to the production of normal insulations
(mineral wool, polystyrene). The paper describes the results of
research focused on the development of thermal and acoustic
insulation materials based on natural fibres intended for floor
constructions. Given the characteristic open porosity of natural fibre
materials, the hygrothermal behaviour of the developed materials was
studied. Especially the influence of relative humidity and temperature
on thermal insulation properties was observed.
Abstract: The paper deals with current issues in research of
advanced methods to increase reliability of traditional timber
structural elements. It analyses the issue of strengthening of bent
timber beams, such as ceiling beams in old (historical) buildings with
additional concrete slab in combination with externally bonded fibre -
reinforced polymer. The paper describes experimental testing of
composite timber-concrete beam with FRP reinforcement and
compares results with FEM analysis.