Abstract: In this paper, the optimum weight and cost of a laminated composite plate is seeked, while it undergoes the heaviest load prior to a complete failure. Various failure criteria are defined for such structures in the literature. In this work, the Tsai-Hill theory is used as the failure criterion. The theory of analysis was based on the Classical Lamination Theory (CLT). A newly type of Genetic Algorithm (GA) as an optimization technique with a direct use of real variables was employed. Yet, since the optimization via GAs is a long process, and the major time is consumed through the analysis, Radial Basis Function Neural Networks (RBFNN) was employed in predicting the output from the analysis. Thus, the process of optimization will be carried out through a hybrid neuro-GA environment, and the procedure will be carried out until a predicted optimum solution is achieved.
Abstract: The background estimation approach using a small
window median filter is presented on the bases of analyzing IR point
target, noise and clutter model. After simplifying the two-dimensional
filter, a simple method of adopting one-dimensional median filter is
illustrated to make estimations of background according to the
characteristics of IR scanning system. The adaptive threshold is used
to segment canceled image in the background. Experimental results
show that the algorithm achieved good performance and satisfy the
requirement of big size image-s real-time processing.
Abstract: Spatial and mobile computing evolves. This paper
describes a smart modeling platform called “GeoSEMA". This
approach tends to model multidimensional GeoSpatial Evolutionary
and Mobile Agents. Instead of 3D and location-based issues, there
are some other dimensions that may characterize spatial agents, e.g.
discrete-continuous time, agent behaviors. GeoSEMA is seen as a
devoted design pattern motivating temporal geographic-based
applications; it is a firm foundation for multipurpose and
multidimensional special-based applications. It deals with
multipurpose smart objects (buildings, shapes, missiles, etc.) by
stimulating geospatial agents.
Formally, GeoSEMA refers to geospatial, spatio-evolutive and
mobile space constituents where a conceptual geospatial space model
is given in this paper. In addition to modeling and categorizing
geospatial agents, the model incorporates the concept of inter-agents
event-based protocols. Finally, a rapid software-architecture
prototyping GeoSEMA platform is also given. It will be
implemented/ validated in the next phase of our work.
Abstract: The acidity of different raw Jordanian clays
containing zeolite, bentonite, red and white kaolinite and diatomite
was characterized by means of temperature programmed desorption
(TPD) of ammonia, conversion of 2-methyl-3-butyn-2-ol (MBOH),
FTIR and BET-measurements. FTIR spectra proved presence of
silanol and bridged hydroxyls on the clay surface. The number of
acidic sites was calculated from experimental TPD-profiles. We
observed the decrease of surface acidity correlates with the decrease
of Si/Al ratio except for diatomite. On the TPD-plot for zeolite two
maxima were registered due to different strength of surface acidic
sites. Values of MBOH conversion, product yields and selectivity
were calculated for the catalysis on Jordanian clays. We obtained that
all clay samples are able to convert MBOH into a major product
which is 3-methyl-3-buten-1-yne (MBYNE) catalyzed by acid
surface sites with the selectivity close to 70%. There was found a
correlation between MBOH conversion and acidity of clays
determined by TPD-NH3, i.e. the higher the acidity the higher the
conversion of MBOH. However, diatomite provided the lowest
conversion of MBOH as result of poor polarization of silanol groups.
Comparison of surface areas and conversions revealed the highest
density of active sites for red kaolinite and the lowest for zeolite and
diatomite.
Abstract: The large and small-scale shaking table tests, which
was conducted for investigating damage evolution of piles inside
liquefied soil, are numerically simulated and experimental verified by the3D nonlinear finite element analysis. Damage evolution of
elasto-plastic circular steel piles and reinforced concrete (RC) one with cracking and yield of reinforcement are focused on, and the failure patterns and residual damages are captured by the proposed constitutive models. The superstructure excitation behind quay wall is
reproduced as well.
Abstract: Educational reforms are focused point of different
nations. New reform movements generally claim that something is
wrong with the current state of affairs, and that the system is deficient in its goals, its accomplishments and it is accused not being
adopted into global changes all over the world. It is the same for
Turkish education system. It is considered those recent reforms of
teacher education in Turkey and the extent to which they reflect a
response to global economic pressures. The paper challenges the
view that such imposes are inevitable determinants of educational
policy and argues that any country will need to develop its own
national approach to modernizing teacher education in light of the
global context and its particular circumstances. It draws on the idea
of reflexive modernization developed by educators and discusses its
implications for teacher education policy. The paper deals with four
themes teacher education in last decade policy in Turkey; the shift
away from the educational disciplines, the shift towards school-based
approaches, and the emergence of more centralized forms of
accountability of teacher competence.
Abstract: Tumor classification is a key area of research in the
field of bioinformatics. Microarray technology is commonly used in
the study of disease diagnosis using gene expression levels. The
main drawback of gene expression data is that it contains thousands
of genes and a very few samples. Feature selection methods are used
to select the informative genes from the microarray. These methods
considerably improve the classification accuracy. In the proposed
method, Genetic Algorithm (GA) is used for effective feature
selection. Informative genes are identified based on the T-Statistics,
Signal-to-Noise Ratio (SNR) and F-Test values. The initial candidate
solutions of GA are obtained from top-m informative genes. The
classification accuracy of k-Nearest Neighbor (kNN) method is used
as the fitness function for GA. In this work, kNN and Support Vector
Machine (SVM) are used as the classifiers. The experimental results
show that the proposed work is suitable for effective feature
selection. With the help of the selected genes, GA-kNN method
achieves 100% accuracy in 4 datasets and GA-SVM method
achieves in 5 out of 10 datasets. The GA with kNN and SVM
methods are demonstrated to be an accurate method for microarray
based tumor classification.
Abstract: Without uncertainty by applying external loads on
beams, bending is created. The created bending in I-beams, puts one
of the flanges in tension and the other one in compression. With increasing of bending, compression flange buckled and beam in out
of its plane direction twisted, this twisting well-known as Lateral Torsional Buckling. Providing bending moment varieties along the
beam, the critical moment is greater than the case its under pure bending. In other words, the value of bending gradient coefficient is
always greater than unite. In this article by the use of " ANSYS 10.0" software near 80 3-D finite element models developed for the
propose of analyzing beams` lateral torsional buckling and surveying influence of slenderness on beams' bending gradient coefficient.
Results show that, presented Cb coefficient via AISC is not correct for some of beams and value of this coefficient is smaller than what proposed by AISC. Therefore instead of using a constant Cb for each
case of loading , a function with two criterion for calculation of Cb coefficient for some cases is proposed.
Abstract: In July 1, 2007, Taiwan Stock Exchange (TWSE) on
market observation post system (MOPS) adds a new "Financial
reference database" for investors to do investment reference. This
database as a warning to public offering companies listed on the
public financial information and it original within eight targets. In
this paper, this database provided by the indicators for the application
of company financial crisis early warning model verify that the
database provided by the indicator forecast for the financial crisis,
whether or not companies have a high accuracy rate as opposed to
domestic and foreign scholars have positive results. There is use of
Logistic Regression Model application of the financial early warning
model, in which no joined back-conditions is the first model, joined it
in is the second model, has been taken occurred in the financial crisis
of companies to research samples and then business took place
before the financial crisis point with T-1 and T-2 sample data to do
positive analysis. The results show that this database provided the
debt ratio and net per share for the best forecast variables.
Abstract: Simulation is a very powerful method used for highperformance
and high-quality design in distributed system, and now
maybe the only one, considering the heterogeneity, complexity and
cost of distributed systems. In Grid environments, foe example, it is
hard and even impossible to perform scheduler performance
evaluation in a repeatable and controllable manner as resources and
users are distributed across multiple organizations with their own
policies. In addition, Grid test-beds are limited and creating an
adequately-sized test-bed is expensive and time consuming.
Scalability, reliability and fault-tolerance become important
requirements for distributed systems in order to support distributed
computation. A distributed system with such characteristics is called
dependable. Large environments, like Cloud, offer unique
advantages, such as low cost, dependability and satisfy QoS for all
users. Resource management in large environments address
performant scheduling algorithm guided by QoS constrains. This
paper presents the performance evaluation of scheduling heuristics
guided by different optimization criteria. The algorithms for
distributed scheduling are analyzed in order to satisfy users
constrains considering in the same time independent capabilities of
resources. This analysis acts like a profiling step for algorithm
calibration. The performance evaluation is based on simulation. The
simulator is MONARC, a powerful tool for large scale distributed
systems simulation. The novelty of this paper consists in synthetic
analysis results that offer guidelines for scheduler service
configuration and sustain the empirical-based decision. The results
could be used in decisions regarding optimizations to existing Grid
DAG Scheduling and for selecting the proper algorithm for DAG
scheduling in various actual situations.
Abstract: Porcelain specimens were fired at 6C/min to 1250C (dwell time 0.5-3h) and cooled at 6C/min to room temperature. Additionally, three different slower firing/cooling cycles were tried. Sintering profile and effects on MOR, crystalline phase content and morphology were investigated using dilatometry, 4-point bending strength, XRD and FEG-SEM respectively. Industrial-sized specimens prepared using the promising cycle were tested basing on the ANSI standards. Increasing dwell time from 1h to 3h at peak temperature of 1250C resulted in neither a significant effect on the quartz and mullite content nor MOR. Reducing the firing/cooling rate to below 6C/min, for peak temperature of 1250C (dwell time of 1h) does not result in improvement of strength of porcelain. The industrial sized specimen exhibited flashover voltages of 20.3kV (dry) and 9.3kV (wet) respectively, transverse strength of 12.5kN and bulk density of 2.27g/cm3, which are satisfactory. There was however dye penetration during porosity test. KeywordsDwell time, Microstructure, Porcelain, Strength.
Abstract: Within the realm of e-government, the development has moved towards testing new means for democratic decisionmaking, like e-panels, electronic discussion forums, and polls. Although such new developments seem promising, they are not problem-free, and the outcomes are seldom used in the subsequent formal political procedures. Nevertheless, process models offer promising potential when it comes to structuring and supporting transparency of decision processes in order to facilitate the integration of the public into decision-making procedures in a reasonable and manageable way. Based on real-life cases of urban planning processes in Sweden, we present an outline for an integrated framework for public decision making to: a) provide tools for citizens to organize discussion and create opinions; b) enable governments, authorities, and institutions to better analyse these opinions; and c) enable governments to account for this information in planning and societal decision making by employing a process model for structured public decision making.
Abstract: Several combinations of the preprocessing algorithms,
feature selection techniques and classifiers can be applied to the data
classification tasks. This study introduces a new accurate classifier,
the proposed classifier consist from four components: Signal-to-
Noise as a feature selection technique, support vector machine,
Bayesian neural network and AdaBoost as an ensemble algorithm.
To verify the effectiveness of the proposed classifier, seven well
known classifiers are applied to four datasets. The experiments show
that using the suggested classifier enhances the classification rates for
all datasets.
Abstract: In this work, the condensation fraction and transition
temperature of neutral many bosonic system are studied within the
static fluctuation approximation (SFA). The effect of the potential
parameters such as the strength and range on the condensate fraction
was investigated. A model potential consisting of a repulsive step
potential and an attractive potential well was used. As the potential
strength or the core radius of the repulsive part increases, the
condensation fraction is found to be decreased at the same
temperature. Also, as the potential depth or the range of the attractive
part increases, the condensation fraction is found to be increased. The
transition temperature is decreased as the potential strength or the
core radius of the repulsive part increases, and it increases as the
potential depth or the range of the attractive part increases.
Abstract: In this study the mixed convection heat transfer in a
coil-in-shell heat exchanger for various Reynolds numbers and
various dimensionless coil pitch was experimentally investigated.
The experiments were conducted for both laminar and turbulent flow
inside coil and the effects of coil pitch on shell-side heat transfer
coefficient of the heat exchanger were studied. The particular
difference in this study in comparison with the other similar studies
was the boundary conditions for the helical coils. The results indicate
that with the increase of coil pitch, shell-side heat transfer coefficient
is increased.
Abstract: We present a non standard Euclidean vehicle
routing problem adding a level of clustering, and we revisit the use
of self-organizing maps as a tool which naturally handles such
problems. We present how they can be used as a main operator
into an evolutionary algorithm to address two conflicting
objectives of route length and distance from customers to bus stops
minimization and to deal with capacity constraints. We apply the
approach to a real-life case of combined clustering and vehicle
routing for the transportation of the 780 employees of an
enterprise. Basing upon a geographic information system we
discuss the influence of road infrastructures on the solutions
generated.
Abstract: This paper presents dynamic voltage collapse prediction on an actual power system using support vector machines.
Dynamic voltage collapse prediction is first determined based on the PTSI calculated from information in dynamic simulation output. Simulations were carried out on a practical 87 bus test system by considering load increase as the contingency. The data collected from the time domain simulation is then used as input to the SVM in which support vector regression is used as a predictor to determine the
dynamic voltage collapse indices of the power system. To reduce training time and improve accuracy of the SVM, the Kernel function type and Kernel parameter are considered. To verify the
effectiveness of the proposed SVM method, its performance is compared with the multi layer perceptron neural network (MLPNN). Studies show that the SVM gives faster and more accurate results for dynamic voltage collapse prediction compared with the MLPNN.
Abstract: Proteomics is one of the largest areas of research for
bioinformatics and medical science. An ambitious goal of proteomics
is to elucidate the structure, interactions and functions of all proteins
within cells and organisms. Predicting Protein-Protein Interaction
(PPI) is one of the crucial and decisive problems in current research.
Genomic data offer a great opportunity and at the same time a lot of
challenges for the identification of these interactions. Many methods
have already been proposed in this regard. In case of in-silico
identification, most of the methods require both positive and negative
examples of protein interaction and the perfection of these examples
are very much crucial for the final prediction accuracy. Positive
examples are relatively easy to obtain from well known databases. But
the generation of negative examples is not a trivial task. Current PPI
identification methods generate negative examples based on some
assumptions, which are likely to affect their prediction accuracy.
Hence, if more reliable negative examples are used, the PPI prediction
methods may achieve even more accuracy. Focusing on this issue, a
graph based negative example generation method is proposed, which
is simple and more accurate than the existing approaches. An
interaction graph of the protein sequences is created. The basic
assumption is that the longer the shortest path between two
protein-sequences in the interaction graph, the less is the possibility of
their interaction. A well established PPI detection algorithm is
employed with our negative examples and in most cases it increases
the accuracy more than 10% in comparison with the negative pair
selection method in that paper.
Abstract: In this paper, Optimum adaptive loading algorithms
are applied to multicarrier system with Space-Time Block Coding
(STBC) scheme associated with space-time processing based on
singular-value decomposition (SVD) of the channel matrix over
Rayleigh fading channels. SVD method has been employed in
MIMO-OFDM system in order to overcome subchannel interference.
Chaw-s and Compello-s algorithms have been implemented to obtain
a bit and power allocation for each subcarrier assuming instantaneous
channel knowledge. The adaptive loaded SVD-STBC scheme is
capable of providing both full-rate and full-diversity for any number
of transmit antennas. The effectiveness of these techniques has
demonstrated through the simulation of an Adaptive loaded SVDSTBC
system, and the comparison shown that the proposed
algorithms ensure better performance in the case of MIMO.
Abstract: To provide a better understanding of fair share policies supported by current production schedulers and their impact on scheduling performance, A relative fair share policy supported in four well-known production job schedulers is evaluated in this study. The experimental results show that fair share indeed reduces heavy-demand users from dominating the system resources. However, the detailed per-user performance analysis show that some types of users may suffer unfairness under fair share, possibly due to priority mechanisms used by the current production schedulers. These users typically are not heavy-demands users but they have mixture of jobs that do not spread out.