Abstract: A simple approach is demonstrated for growing large
scale, nearly vertically aligned ZnO nanowire arrays by thermal
oxidation method. To reveal effect of temperature on growth and
physical properties of the ZnO nanowires, gold coated zinc substrates
were annealed at 300 °C and 400 °C for 4 hours duration in air. Xray
diffraction patterns of annealed samples indicated a set of well
defined diffraction peaks, indexed to the wurtzite hexagonal phase of
ZnO. The scanning electron microscopy studies show formation of
ZnO nanowires having length of several microns and average of
diameter less than 500 nm. It is found that the areal density of wires
is relatively higher, when the annealing is carried out at higher
temperature i.e. at 400°C. From the field emission studies, the values
of the turn-on and threshold field, required to draw emission current
density of 10 μA/cm2 and 100 μA/cm2 are observed to be 1.2 V/μm
and 1.7 V/μm for the samples annealed at 300 °C and 2.9 V/μm and
3.7 V/μm for that annealed at 400 °C, respectively. The field
emission current stability, investigated over duration of more than 2
hours at the preset value of 1 μA, is found to be fairly good in both
cases. The simplicity of the synthesis route coupled with the
promising field emission properties offer unprecedented advantage
for the use of ZnO field emitters for high current density
applications.
Abstract: The purposes of this research were 1) to study
consumer-based equity of luxury brands, 2) to study consumers-
purchase intention for luxury brands, 3) to study direct factors
affecting purchase intention towards luxury brands, and 4) to study
indirect factors affecting purchase intention towards luxury brands
through brand consciousness and brand equity to analyze information
by descriptive statistic and hierarchical stepwise regression analysis.
The findings revealed that the eight variables of the framework which
were: need for uniqueness, normative susceptibility, status
consumption, brand consciousness, brand awareness, perceived
quality, brand association, and brand loyalty affected the purchase
intention of the luxury brands (at the significance of 0.05). Brand
Loyalty had the strongest direct effect while status consumption had
the strongest indirect effect affecting the purchase intention towards
luxury brands. Brand consciousness and brand equity had the
mediators through the purchase intention of the luxury brands (at the
significance of 0.05).
Abstract: The genre of fantasy depicts a world of imagine that triggers popular interest from a created view of world, and a fantasy is defined as a story that illustrates a world of imagine where scientific or horror elements are stand in its center. This study is not focused on the narrative of the fantasy, i.e. not on the adventurous story, but is concentrated on the image of the fantasy to work on its relationship with intended themes and differences among cultures due to meanings of materials. As for films, we have selected some films in the 2000's that are internationally recognized as expressing unique images of fantasy containing the theme of love in them. The selected films are 5 pieces including two European films, Amelie from Montmartre (2001) and The Science of Sleep (2005) and three Asian films, Citizen Dog from Thailand (2004), Memories of Matsuko from Japan (2006), and I'm a Cyborg, but That's OK from Korea (2006). These films share some common characteristics to the effect that they give tiny lessons and feelings for life with expressions of fantasy images as if they were fairy tales for adults and that they lead the audience to reflect on their days and revive forgotten dreams of childhood. We analyze the images of fantasy in each of the films on the basis of the elements of Mise-en-Scène (setting and props, costume, hair and make-up, facial expressions and body language, lighting and color, positioning of characters, and objects within a frame).
Abstract: In this paper, a two-channel secure communication
using fractional chaotic systems is presented. Conditions for chaos
synchronization have been investigated theoretically by using Laplace
transform. To illustrate the effectiveness of the proposed scheme, a
numerical example is presented. The keys, key space, key selection
rules and sensitivity to keys are discussed in detail. Results show that
the original plaintexts have been well masked in the ciphertexts yet
recovered faithfully and efficiently by the present schemes.
Abstract: Ambiguities in effects of earthquake on various
structures in all earthquake codes would necessitate more study and
research concerning influential factors on dynamic behavior.
Previous studies which were done on different features in different
buildings play a major role in the type of response a structure makes
to lateral vibrations. Diagnosing each of these irregularities can help
structure designers in choosing appropriate setbacks for decreasing
possible damages. Therefore vertical setback is one of the irregularity
factors in the height of the building where can be seen in skyscrapers
and hotels. Previous researches reveal notable changes in the place of
these setbacks showing dynamic response of the structure.
Consequently analyzing 48 models of concrete frames for 3, 6 and 9
stories heights with three different bays in general shape of a surface
decline by height have been constructed in ETABS2000 software,
and then the shape effect of each and every one of these frames in
period scale has been discussed. The result of this study reveals that
not only mass, stiffness and height but also shape of the frame is
influential.
Abstract: The environmental impact caused by industries is an issue that, in the last 20 years, has become very important in terms of society, economics and politics in Colombia. Particularly, the tannery process is extremely polluting because of uneffective treatments and regulations given to the dumping process and atmospheric emissions. Considering that, this investigation is intended to propose a management model based on the integration of Lean Supply Chain, Green Supply Chain, Cleaner Production and ISO 14001-2004, that prioritizes the strategic components of the organizations. As a result, a management model will be obtained and it will provide a strategic perspective through a systemic approach to the tanning process. This will be achieved through the use of Multicriteria Decision tools, along with Quality Function Deployment and Fuzzy Logic. The strategic approach that embraces the management model using the alignment of Lean Supply Chain, Green Supply Chain, Cleaner Production and ISO 14001-2004, is an integrated perspective that allows a gradual frame of the tactical and operative elements through the correct setting of the information flow, improving the decision making process. In that way, Small Medium Enterprises (SMEs) could improve their productivity, competitiveness and as an added value, the minimization of the environmental impact. This improvement is expected to be controlled through a Dashboard that helps the Organization measure its performance along the implementation of the model in its productive process.
Abstract: The value of emission factor was calculated in the
older type of Diesel engine operating on an engine testing bench and
then compared with the parameters monitored under similar
conditions when the EnviroxTM additive was applied. It has been
found out that the additive based on CeO2 nanoparticles reduces
emission of NOx. The dependencies of NOx emissions on reduced
torque, engine power and revolutions have been observed as well.
Abstract: This paper proposes fractal patterns for power quality
(PQ) detection using color relational analysis (CRA) based classifier.
Iterated function system (IFS) uses the non-linear interpolation in the
map and uses similarity maps to construct various fractal patterns of
power quality disturbances, including harmonics, voltage sag, voltage
swell, voltage sag involving harmonics, voltage swell involving
harmonics, and voltage interruption. The non-linear interpolation
functions (NIFs) with fractal dimension (FD) make fractal patterns
more distinguishing between normal and abnormal voltage signals.
The classifier based on CRA discriminates the disturbance events in a
power system. Compared with the wavelet neural networks, the test
results will show accurate discrimination, good robustness, and faster
processing time for detecting disturbing events.
Abstract: This paper presents a novel method for prediction of
the mechanical behavior of proximal femur using the general
framework of the quantitative computed tomography (QCT)-based
finite element Analysis (FEA). A systematic imaging and modeling
procedure was developed for reliable correspondence between the
QCT-based FEA and the in-vitro mechanical testing. A speciallydesigned
holding frame was used to define and maintain a unique
geometrical reference system during the analysis and testing. The
QCT images were directly converted into voxel-based 3D finite
element models for linear and nonlinear analyses. The equivalent
plastic strain and the strain energy density measures were used to
identify the critical elements and predict the failure patterns. The
samples were destructively tested using a specially-designed gripping
fixture (with five degrees of freedom) mounted within a universal
mechanical testing machine. Very good agreements were found
between the experimental and the predicted failure patterns and the
associated load levels.
Abstract: Unlike the best effort service provided by the internet
today, next-generation wireless networks will support real-time
applications. This paper proposes an adaptive early packet discard
(AEPD) policy to improve the performance of the real time TCP
traffic over ATM networks and avoid the fragmentation problem.
Three main aspects are incorporated in the proposed policy. First,
providing quality-of-service (QoS) guaranteed for real-time
applications by implementing a priority scheduling. Second,
resolving the partially corrupted packets problem by differentiating
the buffered cells of one packet from another. Third, adapting a
threshold dynamically using Fuzzy logic based on the traffic
behavior to maintain a high throughput under a variety of load
conditions. The simulation is run for two priority classes of the input
traffic: real time and non-real time classes. Simulation results show
that the proposed AEPD policy improves throughput and fairness
over that using static threshold under the same traffic conditions.
Abstract: Losses of surfactant due to sorption need to be
considered when selecting surfactant doses for soil bioremediation.
The degree of surfactant sorption onto soil depends primarily on the
organic carbon fraction of soil and the chemical nature of the
surfactant. The use of biosurfactants in the control of the
bioavailability of toxicants in soils is an attractive option because of
their biodegradability. In this work biosurfactants were produced
from a cheap raw material, trimming vine shoots, employing
Lactobacillus pentosus. When biosurfactants from L. pentosus was
added to sediments the surface tensión of the water containing the
sediments rapidly increase, the same behaviour was observed with
the chemical surfactant Tween 20; whereas sodyum dodecyl sulphate
(SDS) kept the surface tension of the water around 36 mN/m. It
means, that the behaviour of biosurfactants from L. pentosus is more
similar to non-ionic surfactatns than to anionic surfactants.
Abstract: Development of levels of service in municipal context
is a flexible vehicle to assist in performing quality-cost trade-off
analysis for municipal services. This trade-off depends on the
willingness of a community to pay as well as on the condition of the
assets. Community perspective of the performance of an asset from
service point of view may be quite different from the municipality
perspective of the performance of the same asset from condition
point of view. This paper presents a three phased level of service
based methodology for water mains that consists of :1)development
of an Analytical Hierarchy model of level of service 2) development
of Fuzzy Weighted Sum model of water main condition index and 3)
deriving a Fuzzy logic based function that maps level of service to
asset condition index. This mapping will assist asset managers in
quantifying condition improvement requirement to meet service
goals and to make more informed decisions on interventions and
relayed priorities.
Abstract: Ontologies play an important role in semantic web applications and are often developed by different groups and continues to evolve over time. The knowledge in ontologies changes very rapidly that make the applications outdated if they continue to use old versions or unstable if they jump to new versions. Temporal frames using frame versioning and slot versioning are used to take care of dynamic nature of the ontologies. The paper proposes new tags and restructured OWL format enabling the applications to work with the old or new version of ontologies. Gene Ontology, a very dynamic ontology, has been used as a case study to explain the OWL Ontology with Temporal Tags.
Abstract: Cast metal inlays can be used on molars requiring a
class II restoration instead amalgam and offer a durable alternative.
Because it is known that class II inlays may increase the
susceptibility to fracture, it is important to ensure optimal
performance in selection of the adequate preparation design to reduce
stresses in teeth structures and also in the restorations. The aim of the
study was to investigate the influence of preparation design on stress
distribution in molars with different class II preparations and in cast
metal inlays. The first step of the study was to achieve 3D models in
order to analyze teeth and cast metal class II inlays. The geometry of
the intact tooth was obtained by 3D scanning using a manufactured
device. With a NURBS modeling program the preparations and the
appropriately inlays were designed. 3D models of first upper molars
of the same shape and size were created. Inlay cavities designs were
created using literature data. The geometrical model was exported
and the mesh structure of the solid 3D model was created for
structural simulations. Stresses were located around the occlusal
contact areas. For the studied cases, the stress values were not
significant influenced by the taper of the preparation. it was
demonstrated stresses are higher in the cast metal restorations and
therefore the strength of the teeth is not affected.
Abstract: This paper proposes a dual tree complex wavelet transform (DT-CWT) based directional interpolation scheme for noisy images. The problems of denoising and interpolation are modelled as to estimate the noiseless and missing samples under the same framework of optimal estimation. Initially, DT-CWT is used to decompose an input low-resolution noisy image into low and high frequency subbands. The high-frequency subband images are interpolated by linear minimum mean square estimation (LMMSE) based interpolation, which preserves the edges of the interpolated images. For each noisy LR image sample, we compute multiple estimates of it along different directions and then fuse those directional estimates for a more accurate denoised LR image. The estimation parameters calculated in the denoising processing can be readily used to interpolate the missing samples. The inverse DT-CWT is applied on the denoised input and interpolated high frequency subband images to obtain the high resolution image. Compared with the conventional schemes that perform denoising and interpolation in tandem, the proposed DT-CWT based noisy image interpolation method can reduce many noise-caused interpolation artifacts and preserve well the image edge structures. The visual and quantitative results show that the proposed technique outperforms many of the existing denoising and interpolation methods.
Abstract: The two agro-ecological zones became the focus of
the study because of violent nature of the incessant conflict in the
zones. The available register of farmers association was the sampling
frame work where ten percent (61) farmers per state were randomly
sampled. Data were collected and analysed using z-test. The research
findings revealed tree crops and grains production enterprises ranked
higher in Osun (rain fed zones) and Taraba states (savannah zones)
respectively. Osun state entrepreneur felt the effect of the conflict on
their enterprises more than Tarba state. The reasons adduced for
severity of the conflict on enterprises are majority (77.0%) migrated
and (75.5%) of them were not allowed to enter their farms during and
when conflict deescalated unlike situation in Taraba state. The
different in enterprises production level between the two agroecological
zone was statistically significant at p
Abstract: This paper investigates the fractals generated by the dynamical system of intuitionistic fuzzy contractions in the intuitionistic
fuzzy metric spaces by generalizing the Hutchinson-Barnsley theory. We prove some existence and uniqueness theorems of fractals in the
standard intuitionistic fuzzy metric spaces by using the intuitionistic fuzzy Banach contraction theorem. In addition to that, we analyze
some results on intuitionistic fuzzy fractals in the standard intuitionistic fuzzy metric spaces with respect to the Hausdorff intuitionistic
fuzzy metrics.
Abstract: With the tremendous growth of World Wide Web
(WWW) data, there is an emerging need for effective information
retrieval at the document level. Several query languages such as
XML-QL, XPath, XQL, Quilt and XQuery are proposed in recent
years to provide faster way of querying XML data, but they still lack of
generality and efficiency. Our approach towards evolving a framework
for querying semistructured documents is based on formal query
algebra. Two elements are introduced in the proposed framework:
first, a generic and flexible data model for logical representation of
semistructured data and second, a set of operators for the manipulation
of objects defined in the data model. In additional to accommodating
several peculiarities of semistructured data, our model offers novel
features such as bidirectional paths for navigational querying and
partitions for data transformation that are not available in other
proposals.
Abstract: A lot of matching algorithms with different characteristics have been introduced in recent years. For real time systems these algorithms are usually based on minutiae features. In this paper we introduce a novel approach for feature extraction in which the extracted features are independent of shift and rotation of the fingerprint and at the meantime the matching operation is performed much more easily and with higher speed and accuracy. In this new approach first for any fingerprint a reference point and a reference orientation is determined and then based on this information features are converted into polar coordinates. Due to high speed and accuracy of this approach and small volume of extracted features and easily execution of matching operation this approach is the most appropriate for real time applications.
Abstract: Citizens are increasingly are provided with choice and
customization in public services and this has now also become a key
feature of higher education in terms of policy roll-outs on personal
development planning (PDP) and more generally as part of the
employability agenda. The goal here is to transform people, in this
case graduates, into active, responsible citizen-workers. A key part of
this rhetoric and logic is the inculcation of graduate attributes within
students. However, there has also been a concern with the issue of
student lack of engagement and perseverance with their studies. This
paper sets out to explore some of these conceptions that link graduate
attributes with citizenship as well as the notion of how identity is
forged through the higher education process. Examples are drawn
from a quality enhancement project that is being operated within the
context of the Scottish higher education system. This is further
framed within the wider context of competing and conflicting
demands on higher education, exacerbated by the current worldwide
economic climate. There are now pressures on students to develop
their employability skills as well as their capacity to engage with
global issues such as behavioural change in the light of
environmental concerns. It is argued that these pressures, in effect,
lead to a form of personalization that is concerned with how
graduates develop their sense of identity as something that is
engineered and re-engineered to meet these demands.