Abstract: Using neural network we try to model the unknown function f for given input-output data pairs. The connection strength of each neuron is updated through learning. Repeated simulations of crisp neural network produce different values of weight factors that are directly affected by the change of different parameters. We propose the idea that for each neuron in the network, we can obtain quasi-fuzzy weight sets (QFWS) using repeated simulation of the crisp neural network. Such type of fuzzy weight functions may be applied where we have multivariate crisp input that needs to be adjusted after iterative learning, like claim amount distribution analysis. As real data is subjected to noise and uncertainty, therefore, QFWS may be helpful in the simplification of such complex problems. Secondly, these QFWS provide good initial solution for training of fuzzy neural networks with reduced computational complexity.
Abstract: Day by day technology increases and problems
associated with this technology also increase. Several researches
were carried out to investigate the deployment of such material safely
in geotechnical engineering in particular and civil engineering in
general. However, different types of waste material have such as
cement duct, fly ash and slag been proven to be suitable in several
applications. In this research cement dust mixed with different
percentages of sand will be used in some civil engineering
application as will be explained later in this paper throughout filed
and laboratory test. The used mixer (waste material with sand) prove
high performance, durability to environmental condition, low cost
and high benefits. At higher cement dust ratio, small cement ratio is
valuable for compressive strength and permeability. Also at small
cement dust ratio higher cement ratio is valuable for compressive
strength.
Abstract: The distribution, enrichment, and accumulation of zinc
(Zn) in the sediments of Kaohsiung Ocean Disposal Site (KODS),
Taiwan were investigated. Sediment samples from two outer disposal
site stations and nine disposed stations in the KODS were collected per
quarterly in 2009 and characterized for Zn, aluminum, organic matter,
and grain size. Results showed that the mean Zn concentrations varied
from 48 mg/kg to 456 mg/kg. Results from the enrichment factor (EF)
and geo-accumulation index (Igeo) analyses imply that the sediments
collected from the KODS can be characterized between moderate and
moderately severe degree enrichment and between none and none to
medium accumulation of Zn, respectively. However, results of
potential ecological risk index indicate that the sediment has low
ecological potential risk. The EF, Igeo, and Zn concentrations at the
disposed stations were slightly higher than those at outer disposal site.
This indicated that the disposed area centers may be subjected to the
disposal impaction of harbor dredged sediments.
Abstract: Artifact rejection plays a key role in many signal processing applications. The artifacts are disturbance that can occur during the signal acquisition and that can alter the analysis of the signals themselves. Our aim is to automatically remove the artifacts, in particular from the Electroencephalographic (EEG) recordings. A technique for the automatic artifact rejection, based on the Independent Component Analysis (ICA) for the artifact extraction and on some high order statistics such as kurtosis and Shannon-s entropy, was proposed some years ago in literature. In this paper we try to enhance this technique proposing a new method based on the Renyi-s entropy. The performance of our method was tested and compared to the performance of the method in literature and the former proved to outperform the latter.
Abstract: The adsorption properties of CO and H2 on iron-based
catalyst with addition of Zr and Ni were investigated using
temperature programmed desorption process. It was found that on the
carburized iron-based catalysts, molecular state and dissociative state
CO existed together. The addition of Zr was preferential for the
molecular state adsorption of CO on iron-based catalyst and the
presence of Ni was beneficial to the dissociative adsorption of CO. On
H2 reduced catalysts, hydrogen mainly adsorbs on the surface iron
sites and surface oxide sites. On CO reduced catalysts, hydrogen
probably existed as the most stable CH and OH species. The addition
of Zr was not benefit to the dissociative adsorption of hydrogen on
iron-based catalyst and the presence of Ni was preferential for the
dissociative adsorption of hydrogen.
Abstract: HSDPA is a new feature which is introduced in
Release-5 specifications of the 3GPP WCDMA/UTRA standard to
realize higher speed data rate together with lower round-trip times.
Moreover, the HSDPA concept offers outstanding improvement of
packet throughput and also significantly reduces the packet call
transfer delay as compared to Release -99 DSCH. Till now the
HSDPA system uses turbo coding which is the best coding technique
to achieve the Shannon limit. However, the main drawbacks of turbo
coding are high decoding complexity and high latency which makes
it unsuitable for some applications like satellite communications,
since the transmission distance itself introduces latency due to
limited speed of light. Hence in this paper it is proposed to use LDPC
coding in place of Turbo coding for HSDPA system which decreases
the latency and decoding complexity. But LDPC coding increases the
Encoding complexity. Though the complexity of transmitter
increases at NodeB, the End user is at an advantage in terms of
receiver complexity and Bit- error rate. In this paper LDPC Encoder
is implemented using “sparse parity check matrix" H to generate a
codeword at Encoder and “Belief Propagation algorithm "for LDPC
decoding .Simulation results shows that in LDPC coding the BER
suddenly drops as the number of iterations increase with a small
increase in Eb/No. Which is not possible in Turbo coding. Also same
BER was achieved using less number of iterations and hence the
latency and receiver complexity has decreased for LDPC coding.
HSDPA increases the downlink data rate within a cell to a theoretical
maximum of 14Mbps, with 2Mbps on the uplink. The changes that
HSDPA enables includes better quality, more reliable and more
robust data services. In other words, while realistic data rates are
only a few Mbps, the actual quality and number of users achieved
will improve significantly.
Abstract: The main objective of this paper is applying a
comparison between the Wolf Pack Search (WPS) as a newly
introduced intelligent algorithm with several other known algorithms
including Particle Swarm Optimization (PSO), Shuffled Frog
Leaping (SFL), Binary and Continues Genetic algorithms. All
algorithms are applied on two benchmark cost functions. The aim is
to identify the best algorithm in terms of more speed and accuracy in
finding the solution, where speed is measured in terms of function
evaluations. The simulation results show that the SFL algorithm with
less function evaluations becomes first if the simulation time is
important, while if accuracy is the significant issue, WPS and PSO
would have a better performance.
Abstract: Results are presented from a combined experimental
and modeling study undertaken to understand the effect of fuel spray
angle on soot production in turbulent liquid spray flames. The
experimental work was conducted in a cylindrical laboratory furnace
at fuel spray cone angle of 30º, 45º and 60º. Soot concentrations
inside the combustor are measured by filter paper technique. The soot
concentration is modeled by using the soot particle number density
and the mass density based acetylene concentrations. Soot oxidation
occurred by both hydroxide radicals and oxygen molecules. The
comparison of calculated results against experimental measurements
shows good agreement. Both the numerical and experimental results
show that the peak value of soot and its location in the furnace
depend on fuel spray cone angle. An increase in spray angle enhances
the evaporating rate and peak temperature near the nozzle. Although
peak soot concentration increase with enhance of fuel spray angle but
soot emission from the furnace decreases.
Abstract: This paper proposes a “soft systems" approach to
domain-driven design of computer-based information systems. We
propose a systemic framework combining techniques from Soft
Systems Methodology (SSM), the Unified Modelling Language
(UML), and an implementation pattern known as “Naked Objects".
We have used this framework in action research projects that have
involved the investigation and modelling of business processes using
object-oriented domain models and the implementation of software
systems based on those domain models. Within the proposed
framework, Soft Systems Methodology (SSM) is used as a guiding
methodology to explore the problem situation and to generate a
ubiquitous language (soft language) which can be used as the basis
for developing an object-oriented domain model. The domain model
is further developed using techniques based on the UML and is
implemented in software following the “Naked Objects"
implementation pattern. We argue that there are advantages from
combining and using techniques from different methodologies in this
way.
The proposed systemic framework is overviewed and justified as
multimethodologyusing Mingers multimethodology ideas.
This multimethodology approach is being evaluated through a
series of action research projects based on real-world case studies. A
Peer-Tutoring case study is presented here as a sample of the
framework evaluation process
Abstract: The purpose of this study was to develop a “teachers’
self-efficacy scale for high school physical education teachers
(TSES-HSPET)” in Taiwan. This scale is based on the self-efficacy
theory of Bandura [1], [2]. This study used exploratory and
confirmatory factor analyses to test the reliability and validity. The
participants were high school physical education teachers in Taiwan.
Both stratified random sampling and cluster sampling were used to
sample participants for the study. 350 teachers were sampled in the
first stage and 234 valid scales (male 133, female 101) returned.
During the second stage, 350 teachers were sampled and 257 valid
scales (male 143, female 110, 4 did not indicate gender) returned. The
exploratory factor analysis was used in the first stage, and it got
60.77% of total variance for construct validity. The Cronbach’s alpha
coefficient of internal consistency was 0.91 for sumscale, and
subscales were 0.84 and 0.90. In the second stage, confirmatory factor
analysis was used to test construct validity. The result showed that the
fit index could be accepted (χ2 (75) =167.94, p
Abstract: Lycopene, which can be extracted from plants and is
very popular for fruit intake, is restricted for healthy food development
due to its high price. On the other hand, it will get great safety
concerns, especially in the food or cosmetic application, if the raw
material of lycopene is produced by chemical synthesis. In this
project, we provide a key technology to bridge the limitation as
mentioned above. Based on the abundant bioresources of BCRC
(Bioresource Collection and Research Center, Taiwan), a promising
lycopene output will be anticipated by the introduction of fermentation
technology along with industry-related core energy. Our results
showed that addition of tween 80(0.2%) and span 20 produced higher
amount of lycopene. And piperidine, when was added at 48hr to the
cultivation medium, could promote lycopene excretion effectively
also.
Abstract: Digital watermarking in medical images can ensure
the authenticity and integrity of the image. This design paper reviews
some existing watermarking schemes and proposes a reversible
tamper detection and recovery watermarking scheme. Watermark
data from ROI (Region Of Interest) are stored in RONI (Region Of
Non Interest). The embedded watermark allows tampering detection
and tampered image recovery. The watermark is also reversible and
data compression technique was used to allow higher embedding
capacity.
Abstract: Distributed wireless sensor network consist on several
scattered nodes in a knowledge area. Those sensors have as its only
power supplies a pair of batteries that must let them live up to five
years without substitution. That-s why it is necessary to develop
some power aware algorithms that could save battery lifetime as
much as possible. In this is document, a review of power aware
design for sensor nodes is presented. As example of implementations,
some resources and task management, communication, topology
control and routing protocols are named.
Abstract: This paper mainly about the study on one of the
widely used error correcting codes that is Low parity check Codes
(LDPC). In this paper, the Regular LDPC code has been discussed
The LDPC codes explained in this paper is about the Regular Binary
LDPC codes or the Gallager.
Abstract: This paper unifies power optimization approaches in
various energy converters, such as: thermal, solar, chemical, and
electrochemical engines, in particular fuel cells. Thermodynamics
leads to converter-s efficiency and limiting power. Efficiency
equations serve to solve problems of upgrading and downgrading of
resources. While optimization of steady systems applies the
differential calculus and Lagrange multipliers, dynamic optimization
involves variational calculus and dynamic programming. In reacting
systems chemical affinity constitutes a prevailing component of an
overall efficiency, thus the power is analyzed in terms of an active
part of chemical affinity. The main novelty of the present paper in the
energy yield context consists in showing that the generalized heat
flux Q (involving the traditional heat flux q plus the product of
temperature and the sum products of partial entropies and fluxes of
species) plays in complex cases (solar, chemical and electrochemical)
the same role as the traditional heat q in pure heat engines.
The presented methodology is also applied to power limits in fuel
cells as to systems which are electrochemical flow engines propelled
by chemical reactions. The performance of fuel cells is determined by
magnitudes and directions of participating streams and mechanism of
electric current generation. Voltage lowering below the reversible
voltage is a proper measure of cells imperfection. The voltage losses,
called polarization, include the contributions of three main sources:
activation, ohmic and concentration. Examples show power maxima
in fuel cells and prove the relevance of the extension of the thermal
machine theory to chemical and electrochemical systems. The main
novelty of the present paper in the FC context consists in introducing
an effective or reduced Gibbs free energy change between products p
and reactants s which take into account the decrease of voltage and
power caused by the incomplete conversion of the overall reaction.
Abstract: Reduction of Single Input Single Output (SISO) discrete systems into lower order model, using a conventional and an evolutionary technique is presented in this paper. In the conventional technique, the mixed advantages of Modified Cauer Form (MCF) and differentiation are used. In this method the original discrete system is, first, converted into equivalent continuous system by applying bilinear transformation. The denominator of the equivalent continuous system and its reciprocal are differentiated successively, the reduced denominator of the desired order is obtained by combining the differentiated polynomials. The numerator is obtained by matching the quotients of MCF. The reduced continuous system is converted back into discrete system using inverse bilinear transformation. In the evolutionary technique method, Particle Swarm Optimization (PSO) is employed to reduce the higher order model. PSO method is based on the minimization of the Integral Squared Error (ISE) between the transient responses of original higher order model and the reduced order model pertaining to a unit step input. Both the methods are illustrated through numerical example.
Abstract: The aim of this paper is to present the role of
myotonometry in assessment muscle viscoelasticity by measurement
of force index (IF) and stiffness (S) at thigh muscle groups. The
results are used for improve the muscle training. The method is based
on mechanic impulse on the muscle group, that involve a muscle
response like acceleration, speed and amplitude curves. From these
we have information about elasticity, stiffness beginning from
mechanic oscillations of muscle tissue. Using this method offer the
possibility for monitoring the muscle capacity for produce mechanic
energy, that allows a efficiency of movement with a minimal tissue
deformation.
Abstract: Internet computer games turn to be more and more
attractive within the context of technology enhanced learning.
Educational games as quizzes and quests have gained significant
success in appealing and motivating learners to study in a different
way and provoke steadily increasing interest in new methods of
application. Board games are specific group of games where figures
are manipulated in competitive play mode with race conditions on a
surface according predefined rules. The article represents a new,
formalized model of traditional quizzes, puzzles and quests shown as
multimedia board games which facilitates the construction process of
such games. Authors provide different examples of quizzes and their
models in order to demonstrate the model is quite general and does
support not only quizzes, mazes and quests but also any set of
teaching activities. The execution process of such models is
explained and, as well, how they can be useful for creation and
delivery of adaptive e-learning courseware.
Abstract: Understanding the cell's large-scale organization is an
interesting task in computational biology. Thus, protein-protein
interactions can reveal important organization and function of the
cell. Here, we investigated the correspondence between protein
interactions and function for the yeast. We obtained the correlations
among the set of proteins. Then these correlations are clustered using
both the hierarchical and biclustering methods. The detailed analyses
of proteins in each cluster were carried out by making use of their
functional annotations. As a result, we found that some functional
classes appear together in almost all biclusters. On the other hand, in
hierarchical clustering, the dominancy of one functional class is
observed. In brief, from interaction data to function, some correlated
results are noticed about the relationship between interaction and
function which might give clues about the organization of the
proteins.
Abstract: With Power system movement toward restructuring along with factors such as life environment pollution, problems of transmission expansion and with advancement in construction technology of small generation units, it is expected that small units like wind turbines, fuel cells, photovoltaic, ... that most of the time connect to the distribution networks play a very essential role in electric power industry. With increase in developing usage of small generation units, management of distribution networks should be reviewed. The target of this paper is to present a new method for optimal management of active and reactive power in distribution networks with regard to costs pertaining to various types of dispersed generations, capacitors and cost of electric energy achieved from network. In other words, in this method it-s endeavored to select optimal sources of active and reactive power generation and controlling equipments such as dispersed generations, capacitors, under load tapchanger transformers and substations in a way that firstly costs in relation to them are minimized and secondly technical and physical constraints are regarded. Because the optimal management of distribution networks is an optimization problem with continuous and discrete variables, the new evolutionary method based on Ant Colony Algorithm has been applied. The simulation results of the method tested on two cases containing 23 and 34 buses exist and will be shown at later sections.