Abstract: The finite-difference time-domain (FDTD) method is
one of the most widely used computational methods in
electromagnetic. This paper describes the design of two-dimensional
(2D) FDTD simulation software for transverse magnetic (TM)
polarization using Berenger's split-field perfectly matched layer
(PML) formulation. The software is developed using Matlab
programming language. Numerical examples validate the software.
Abstract: In this paper, a semi-fragile watermarking scheme is proposed for color image authentication. In this particular scheme, the color image is first transformed from RGB to YST color space, suitable for watermarking the color media. Each channel is divided into 4×4 non-overlapping blocks and its each 2×2 sub-block is selected. The embedding space is created by setting the two LSBs of selected sub-block to zero, which will hold the authentication and recovery information. For verification of work authentication and parity bits denoted by 'a' & 'p' are computed for each 2×2 subblock. For recovery, intensity mean of each 2×2 sub-block is computed and encoded upto six to eight bits depending upon the channel selection. The size of sub-block is important for correct localization and fast computation. For watermark distribution 2DTorus Automorphism is implemented using a private key to have a secure mapping of blocks. The perceptibility of watermarked image is quite reasonable both subjectively and objectively. Our scheme is oblivious, correctly localizes the tampering and able to recovery the original work with probability of near one.
Abstract: In this work, a Modified Functional Link Artificial
Neural Network (M-FLANN) is proposed which is simpler than a
Multilayer Perceptron (MLP) and improves upon the universal
approximation capability of Functional Link Artificial Neural
Network (FLANN). MLP and its variants: Direct Linear Feedthrough
Artificial Neural Network (DLFANN), FLANN and
M-FLANN have been implemented to model a simulated Water Bath
System and a Continually Stirred Tank Heater (CSTH). Their
convergence speed and generalization ability have been compared.
The networks have been tested for their interpolation and
extrapolation capability using noise-free and noisy data. The results
show that M-FLANN which is computationally cheap, performs
better and has greater generalization ability than other networks
considered in the work.
Abstract: This paper is concerned with studying the forgetting factor of the recursive least square (RLS). A new dynamic forgetting factor (DFF) for RLS algorithm is presented. The proposed DFF-RLS is compared to other methods. Better performance at convergence and tracking of noisy chirp sinusoid is achieved. The control of the forgetting factor at DFF-RLS is based on the gradient of inverse correlation matrix. Compared with the gradient of mean square error algorithm, the proposed approach provides faster tracking and smaller mean square error. In low signal-to-noise ratios, the performance of the proposed method is superior to other approaches.
Abstract: This paper presents a new system developed in Java®
for pattern recognition and pattern summarisation in multi-band
(RGB) satellite images. The system design is described in some
detail. Results of testing the system to analyse and summarise
patterns in SPOT MS images and LANDSAT images are also
discussed.
Abstract: It is an important task in Korean-English machine
translation to classify the gender of names correctly. When a sentence
is composed of two or more clauses and only one subject is given as a proper noun, it is important to find the gender of the proper noun
for correct translation of the sentence. This is because a singular pronoun has a gender in English while it does not in Korean. Thus,
in Korean-English machine translation, the gender of a proper noun should be determined. More generally, this task can be expanded into the classification of the general Korean names. This paper proposes a statistical method for this problem. By considering a name as just
a sequence of syllables, it is possible to get a statistics for each name from a collection of names. An evaluation of the proposed method
yields the improvement in accuracy over the simple looking-up of the
collection. While the accuracy of the looking-up method is 64.11%, that of the proposed method is 81.49%. This implies that the proposed
method is more plausible for the gender classification of the Korean names.
Abstract: Today, transport and logistic systems are often tightly
integrated in the production. Lean production and just-in-time delivering create multiple constraints that have to be fulfilled. As transport networks often have evolved over time they are very
expensive to change. This paper describes a discrete-event-simulation
system which simulates transportation models using real time
resource routing and collision avoidance. It allows for the
specification of own control algorithms and validation of new
strategies. The simulation is integrated into a virtual reality (VR)
environment and can be displayed in 3-D to show the progress.
Simulation elements can be selected through VR metaphors. All data
gathered during the simulation can be presented as a detailed summary afterwards. The included cost-benefit calculation can help to optimize the financial outcome. The operation of this approach is shown by the example of a timber harvest simulation.
Abstract: Serial hierarchical support vector machine (SHSVM)
is proposed to discriminate three brain tissues which are white matter
(WM), gray matter (GM), and cerebrospinal fluid (CSF). SHSVM
has novel classification approach by repeating the hierarchical
classification on data set iteratively. It used Radial Basis Function
(rbf) Kernel with different tuning to obtain accurate results. Also as
the second approach, segmentation performed with DAGSVM
method. In this article eight univariate features from the raw DTI data
are extracted and all the possible 2D feature sets are examined within
the segmentation process. SHSVM succeed to obtain DSI values
higher than 0.95 accuracy for all the three tissues, which are higher
than DAGSVM results.
Abstract: Although there have been many researches in cluster
analysis to consider on feature weights, little effort is made on sample
weights. Recently, Yu et al. (2011) considered a probability
distribution over a data set to represent its sample weights and then
proposed sample-weighted clustering algorithms. In this paper, we
give a sample-weighted version of generalized fuzzy clustering
regularization (GFCR), called the sample-weighted GFCR
(SW-GFCR). Some experiments are considered. These experimental
results and comparisons demonstrate that the proposed SW-GFCR is
more effective than the most clustering algorithms.
Abstract: The quick training algorithms and accurate solution
procedure for incremental learning aim at improving the efficiency of
training of SVR, whereas there are some disadvantages for them, i.e.
the nonconvergence of the formers for changeable training set and
the inefficiency of the latter for a massive dataset. In order to handle
the problems, a new training algorithm for a changeable training
set, named Approximation Incremental Training Algorithm (AITA),
was proposed. This paper explored the reason of nonconvergence
theoretically and discussed the realization of AITA, and finally
demonstrated the benefits of AITA both on precision and efficiency.
Abstract: In this contribution a newly developed e-learning environment is presented, which incorporates Intelligent Agents and Computational Intelligence Techniques. The new e-learning environment is constituted by three parts, the E-learning platform Front-End, the Student Questioner Reasoning and the Student Model Agent. These parts are distributed geographically in dispersed computer servers, with main focus on the design and development of these subsystems through the use of new and emerging technologies. These parts are interconnected in an interoperable way, using web services for the integration of the subsystems, in order to enhance the user modelling procedure and achieve the goals of the learning process.
Abstract: Existing methods in which the animation data of all frames are stored and reproduced as with vertex animation cannot be used in mobile device environments because these methods use large amounts of the memory. So 3D animation data reduction methods aimed at solving this problem have been extensively studied thus far and we propose a new method as follows. First, we find and remove frames in which motion changes are small out of all animation frames and store only the animation data of remaining frames (involving large motion changes). When playing the animation, the removed frame areas are reconstructed using the interpolation of the remaining frames. Our key contribution is to calculate the accelerations of the joints of individual frames and the standard deviations of the accelerations using the information of joint locations in the relevant 3D model in order to find and delete frames in which motion changes are small. Our methods can reduce data sizes by approximately 50% or more while providing quality which is not much lower compared to original animations. Therefore, our method is expected to be usefully used in mobile device environments or other environments in which memory sizes are limited.
Abstract: A subjectively influenced router for vehicles in a fourjunction
traffic system is presented. The router is based on a 3-layer
Backpropagation Neural Network (BPNN) and a greedy routing
procedure. The BPNN detects priorities of vehicles based on the
subjective criteria. The subjective criteria and the routing procedure
depend on the routing plan towards vehicles depending on the user.
The routing procedure selects vehicles from their junctions based on
their priorities and route them concurrently to the traffic system. That
is, when the router is provided with a desired vehicles selection
criteria and routing procedure, it routes vehicles with a reasonable
junction clearing time. The cost evaluation of the router determines
its efficiency. In the case of a routing conflict, the router will route
the vehicles in a consecutive order and quarantine faulty vehicles.
The simulations presented indicate that the presented approach is an
effective strategy of structuring a subjective vehicle router.
Abstract: A generalised relational data model is formalised for
the representation of data with nested structure of arbitrary depth. A
recursive algebra for the proposed model is presented. All the
operations are formally defined. The proposed model is proved to be
a superset of the conventional relational model (CRM). The
functionality and validity of the model is shown by a prototype
implementation that has been undertaken in the functional
programming language Miranda.
Abstract: This paper proposes evaluation of sound parameterization methods in recognizing some spoken Arabic words, namely digits from zero to nine. Each isolated spoken word is represented by a single template based on a specific recognition feature, and the recognition is based on the Euclidean distance from those templates. The performance analysis of recognition is based on four parameterization features: the Burg Spectrum Analysis, the Walsh Spectrum Analysis, the Thomson Multitaper Spectrum Analysis and the Mel Frequency Cepstral Coefficients (MFCC) features. The main aim of this paper was to compare, analyze, and discuss the outcomes of spoken Arabic digits recognition systems based on the selected recognition features. The results acqired confirm that the use of MFCC features is a very promising method in recognizing Spoken Arabic digits.
Abstract: The Sensor Network consists of densely deployed
sensor nodes. Energy optimization is one of the most important
aspects of sensor application design. Data acquisition and aggregation
techniques for processing data in-network should be energy efficient.
Due to the cross-layer design, resource-limited and noisy nature
of Wireless Sensor Networks(WSNs), it is challenging to study
the performance of these systems in a realistic setting. In this
paper, we propose optimizing queries by aggregation of data and
data redundancy to reduce energy consumption without requiring
all sensed data and directed diffusion communication paradigm to
achieve power savings, robust communication and processing data
in-network. To estimate the per-node power consumption POWERTossim
mica2 energy model is used, which provides scalable and
accurate results. The performance analysis shows that the proposed
methods overcomes the existing methods in the aspects of energy
consumption in wireless sensor networks.
Abstract: Support vector machines (SVMs) are considered to be
the best machine learning algorithms for minimizing the predictive
probability of misclassification. However, their drawback is that for
large data sets the computation of the optimal decision boundary is a
time consuming function of the size of the training set. Hence several
methods have been proposed to speed up the SVM algorithm. Here
three methods used to speed up the computation of the SVM
classifiers are compared experimentally using a musical genre
classification problem. The simplest method pre-selects a random
sample of the data before the application of the SVM algorithm. Two
additional methods use proximity graphs to pre-select data that are
near the decision boundary. One uses k-Nearest Neighbor graphs and
the other Relative Neighborhood Graphs to accomplish the task.
Abstract: Recently, there have been considerable efforts towards the convergence between P2P and Grid computing in order to reach a solution that takes the best of both worlds by exploiting the advantages that each offers. Augmenting the peer-to-peer model to the services of the Grid promises to eliminate bottlenecks and ensure greater scalability, availability, and fault-tolerance. The Grid Information Service (GIS) directly influences quality of service for grid platforms. Most of the proposed solutions for decentralizing the GIS are based on completely flat overlays. The main contributions for this paper are: the investigation of a novel resource discovery framework for Grid implementations based on a hierarchy of structured peer-to-peer overlay networks, and introducing a discovery algorithm utilizing the proposed framework. Validation of the framework-s performance is done via simulation. Experimental results show that the proposed organization has the advantage of being scalable while providing fault-isolation, effective bandwidth utilization, and hierarchical access control. In addition, it will lead to a reliable, guaranteed sub-linear search which returns results within a bounded interval of time and with a smaller amount of generated traffic within each domain.
Abstract: Time series analysis often requires data that represents
the evolution of an observed variable in equidistant time steps. In
order to collect this data sampling is applied. While continuous
signals may be sampled, analyzed and reconstructed applying
Shannon-s sampling theorem, time-discrete signals have to be dealt
with differently. In this article we consider the discrete-event
simulation (DES) of job-shop-systems and study the effects of
different sampling rates on data quality regarding completeness and
accuracy of reconstructed inventory evolutions. At this we discuss
deterministic as well as non-deterministic behavior of system
variables. Error curves are deployed to illustrate and discuss the
sampling rate-s impact and to derive recommendations for its wellfounded
choice.
Abstract: Cell formation is the first step in the design of cellular
manufacturing systems. In this study, a general purpose
computational scheme employing a hybrid tabu search algorithm as
the core is proposed to solve the cell formation problem and its
variants. In the proposed scheme, great flexibilities are left to the
users. The core solution searching algorithm embedded in the scheme
can be easily changed to any other meta-heuristic algorithms, such as
the simulated annealing, genetic algorithm, etc., based on the
characteristics of the problems to be solved or the preferences the
users might have. In addition, several counters are designed to control
the timing of conducting intensified solution searching and diversified
solution searching strategies interactively.