Abstract: The tracing methods determine the contribution the
power system sources have in their supplying. These methods can be
used to assess the transmission prices, but also to recover the
transmission fixed cost. In this paper is presented the influence of the
modification of commons structure has on the specific price of transfer
and on active power losses. The authors propose a power losses
allocation method, based on Kirschen-s method. The system operator
must make use of a few basic principles about allocation. The only
necessary information is the power flows on system branches and the
modifications applied to power system buses. In order to illustrate this
method, the 25-bus test system is used, elaborated within the Electrical
Power Engineering Department, from Timisoara, Romania.
Abstract: There are many views on how human decision makers behave. In this work, the Justices of the United States Supreme Court will be viewed in terms of constrained maximization and cognitivecybernetic theory. This paper will integrate research in such fields as law, political science, psychology, economics and decision making theory. It will be argued that due to its heavy workload, the Supreme Court is forced to make decisions in a boundedly rational manner. The ideas and theory put forward here will be tested in the area of the Court’s decisions involving religion. Therefore, the cases involving the U.S. Constitution’s Free Exercise Clause and Establishment Clause will be analyzed. Also, variables such as the U.S. government’s involvement in these cases will be considered. The years to be studied will be 1987-2011.
Abstract: Equal Channel Angular Pressing (ECAP) is currently
being widely investigated because of its potential to produce ultrafine
grained microstructures in metals and alloys. A sound
knowledge of the plastic deformation and strain distribution is
necessary for understanding the relationships between strain
inhomogeneity and die geometry. Considerable research has been
reported on finite element analysis of this process, assuming threedimensional
plane strain condition. However, the two-dimensional
models are not suitable due to the geometry of the dies, especially in
cylindrical ones. In the present work, three-dimensional simulation of
ECAP process was carried out for six outer corner radii (sharp to 10
mm in steps of 2 mm), with channel angle 105¶Çü▒, for strain hardening
aluminium alloy (AA 6101) using ABAQUS/Standard software.
Strain inhomogeneity is presented and discussed for all cases. Pattern
of strain variation along selected radial lines in the body of the workpiece
is presented. It is found from the results that the outer corner
has a significant influence on the strain distribution in the body of
work-piece. Based on inhomogeneity and average strain criteria,
there is an optimum outer corner radius.
Abstract: This study offers a new simple method for assessing
an axial part-through crack in a pipe wall. The method utilizes simple
approximate expressions for determining the fracture parameters K,
J, and employs these parameters to determine critical dimensions of a
crack on the basis of equality between the J-integral and the J-based
fracture toughness of the pipe steel. The crack tip constraint is taken
into account by the so-called plastic constraint factor C, by which the
uniaxial yield stress in the J-integral equation is multiplied. The
results of the prediction of the fracture condition are verified by burst
tests on test pipes.
Abstract: Architecture education was based on apprenticeship
models and its nature has not changed much during long period but
the Source of changes was its evaluation process and system. It is
undeniable that art and architecture education is completely based on
transmitting knowledge from instructor to students. In contrast to
other majors this transmitting is by iteration and practice and studio
masters try to control the design process and improving skills in the
form of supervision and criticizing. Also the evaluation will end by
giving marks to students- achievements. Therefore the importance of
the evaluation and assessment role is obvious and it is not irrelevant
to say that if we want to know about the architecture education
system, we must first study its assessment procedures. The evolution
of these changes in western countries has literate and documented
well. However it seems that this procedure has unregarded in
Malaysia and there is a severe lack of research and documentation in
this area. Malaysia as an under developing and multicultural country
which is involved different races and cultures is a proper origin for
scrutinizing and understanding the evaluation systems and
acceptability amount of current implemented models to keep the
evaluation and assessment procedure abreast with needs of different
generations, cultures and even genders. This paper attempts to
answer the questions of how evaluation and assessments are
performed and how students perceive this evaluation system in the
context Malaysia. The main advantage of this work is that it
contributes in international debate on evaluation model.
Abstract: A renewable energy system discussed in this paper is
a stand-alone wind-hydrogen system for a remote island in Australia.
The analysis of an existing wind-diesel power system was performed.
Simulation technique was used to model the power system currently
employed on the island, and simulated different configurations of
additional hydrogen energy system. This study aims to determine the
suitable hydrogen integrated configuration to setting up the prototype
system for the island, which helps to reduce the diesel consumption
on the island. A set of configurations for the hydrogen system and
associated parameters that consists of wind turbines, electrolysers,
hydrogen internal combustion engines, and storage tanks has been
purposed. The simulation analyses various configurations that
perfectly balances the system to meet the demand on the island.
Abstract: During last decades, worldwide researchers dedicated
efforts to develop machine-based seismic Early Warning systems,
aiming at reducing the huge human losses and economic damages.
The elaboration time of seismic waveforms is to be reduced in order
to increase the time interval available for the activation of safety
measures. This paper suggests a Data Mining model able to correctly
and quickly estimate dangerousness of the running seismic event.
Several thousand seismic recordings of Japanese and Italian
earthquakes were analyzed and a model was obtained by means of a
Bayesian Network (BN), which was tested just over the first
recordings of seismic events in order to reduce the decision time and
the test results were very satisfactory.
The model was integrated within an Early Warning System
prototype able to collect and elaborate data from a seismic sensor
network, estimate the dangerousness of the running earthquake and
take the decision of activating the warning promptly.
Abstract: Increased physical fitness participation has been
paralleled by increasedoveruse injuries such as insertional Achilles
tendinosis (AT). Treatment has provided inconsistentresults. The use
of extracorporeal shockwave therapy (ECSWT) offers a new
treatment consideration.The purpose of this study was to assess the
effects of ECSWTon pain, function, range of motion (ROM), joint
mobility and strength in patients with AT. Thirty subjects were
treated with ECSWT and measures were takenbefore and three
months after treatment. There was significant differences in visual
analog scale (VAS) scores for pain at rest (p=0.002); after activity
(p= 0.0001); overall improvement(p=0.0001); Lower Extremity
Functional Scale (LEFS) scores (p=0.002); dorsiflexion range of
motion (ROM) (p=0.0001); plantarflexion strength (p=0.025);
talocrural joint anterior glide (p=0.046); and subtalar joint medial and
lateral glide (p=0.025).ECSWT offers a new intervention that may
limit the progression of the disorder and the long term healthcare
costs associated with AT.
Abstract: Grid scheduling is the process of mapping grid jobs to resources over multiple administrative domains. Traditionally, application-level schedulers have been tightly integrated with the application itself and were not easily applied to other applications. This design is generic that decouples the scheduler core (the search procedure) from the application-specific (e.g. application performance models) and platform-specific (e.g. collection of resource information) components used by the search procedure. In this decoupled approach the application details are not revealed completely to broker, but customer will give the application to resource provider for execution. In a decoupled approach, apart from scheduling, the resource selection can be performed independently in order to achieve scalability.
Abstract: Indian telecom services industry has been witnessing
a stupendous growth since 1990s. Over the years, subscriber base has
grown steadily and it crossed 950 million marks in March 2012.
India with second largest subscriber base also offers one of the
lowest call tariffs in the world. But in the euphoria of high growth in
services, the equipment manufacturing received least priority. India
mainly depends on imported components from China. Of late, it is
realized that lack of domestic manufacturing may pose a serious
challenge to India-s continued success in the telecom sector.
Therefore, the National Telecom Policy 2012 aims at developing a
strong equipment manufacturing base within India. This paper
realistically assesses India-s true potential in equipment
manufacturing and seeks to identify the emerging issues and
challenges before the Indian telecom equipment manufacturing sector
while it tries to make a transition from an import-dependent industry
to a global manufacturing hub.
Abstract: Overall, the findings of the present study suggest that
teachers have low to moderate levels of professionalisation, high
level of career identity and moderate levels of career resilience, and
career planning. From the T-tests and F-tests conducted, it was found
that gender has a significant impact on career identity whereas age
and marital status have significant impact on career planning and also
on career identity. The results indicate that there is a higher
possibility of male teachers to leave the teaching profession than the
female teachers. The result of the T-test on career identity in relation
to gender supports this deduction in which female teachers have
significantly higher career identity than their male counterparts.
Marital status was also found to have a significant impact on career
identity.
Abstract: This paper reviews the major contributions to the Motion Planning (MP) field throughout a 35-year period, from classic approaches to heuristic algorithms. Due to the NP-Hardness of the MP problem, heuristic methods have outperformed the classic approaches and have gained wide popularity. After surveying around 1400 papers in the field, the amount of existing works for each method is identified and classified. Especially, the history and applications of numerous heuristic methods in MP is investigated. The paper concludes with comparative tables and graphs demonstrating the frequency of each MP method's application, and so can be used as a guideline for MP researchers.
Abstract: Hair is a non homogenous complex material which
can be associated with a polymer. It is made up 95% of Keratin.
Hair has a great social significance for human beings. In the High
Middle Ages, for example, long hairs have been reserved for kings
and nobles.
Most common interest in hair is focused on hair growth, hair types
and hair care, but hair is also an important biomaterial which can
vary depending on ethnic origin or on age, hair colour for example
can be a sign of ethnic ancestry or age (dark hair for Asiatic, blond
hair for Caucasian and white hair for old people in general).
In this context, different approaches have been conducted to
determine the differences in mechanical properties and characterize
the fracture topography at the surface of hair depending on its type
and its age.
A tensile testing machine was especially designed to achieve
tensile tests on hair. This device is composed of a microdisplacement
system and a force sensor whose peak load is limited to
3N. The curves and the values extracted from each experiment, allow
us to compare the evolution of the mechanical properties from one
hair to another.
Observations with a Scanning Electron Microscope (SEM) and
with an interferometer were made on different hairs. Thus, it is
possible to access the cuticle state and the fracture topography for
each category.
Abstract: Fractional Fourier Transform, which is a
generalization of the classical Fourier Transform, is a powerful tool
for the analysis of transient signals. The discrete Fractional Fourier
Transform Hamiltonians have been proposed in the past with varying
degrees of correlation between their eigenvectors and Hermite
Gaussian functions. In this paper, we propose a new Hamiltonian for
the discrete Fractional Fourier Transform and show that the
eigenvectors of the proposed matrix has a higher degree of
correlation with the Hermite Gaussian functions. Also, the proposed
matrix is shown to give better Fractional Fourier responses with
various transform orders for different signals.
Abstract: Usually, the solid-fuel flow of an iron ore sinter plant
consists of different types of the solid-fuels, which differ from each
other. Information about the composition of the solid-fuel flow
usually comes every 8-24 hours. It can be clearly seen that this
information cannot be used to control the sintering process in real
time. Due to this, we propose an expert system which uses indirect
measurements from the process in order to obtain the composition of
the solid-fuel flow by solving an optimization task. Then this
information can be used to control the sintering process. The
proposed technique can be successfully used to improve sinter
quality and reduce the amount of solid-fuel used by the process.
Abstract: In two studies we challenged the well consolidated
position in regret literature according to which the necessary
condition for the emergence of regret is a bad outcome ensuing from
free decisions. Without free choice, and, consequently, personal
responsibility, other emotions, such as disappointment, but not regret,
are supposed to be elicited. In our opinion, a main source of regret is
being obliged by circumstance out of our control to chose an
undesired option. We tested the hypothesis that regret resulting from
a forced choice is more intense than regret derived from a free choice
and that the outcome affects the latter, not the former. Besides, we
investigated whether two other variables – the perception of the level
of freedom of the choice and the choice justifiability – mediated the
relationships between choice and regret, as well as the other four
emotions we examined: satisfaction, anger toward oneself,
disappointment, anger towards circumstances. The two studies were
based on the scenario methodology and implied a 2 x 2 (choice x
outcome) between design. In the first study the foreseen short-term
effects of the choice were assessed; in the second study the
experienced long-term effects of the choice were assessed. In each
study 160 students of the Second University of Naples participated.
Results largely corroborated our hypotheses. They were discussed in
the light of the main theories on regret and decision making.
Abstract: In this paper we compare the accuracy of data mining
methods to classifying students in order to predicting student-s class
grade. These predictions are more useful for identifying weak
students and assisting management to take remedial measures at early
stages to produce excellent graduate that will graduate at least with
second class upper. Firstly we examine single classifiers accuracy on
our data set and choose the best one and then ensembles it with a
weak classifier to produce simple voting method. We present results
show that combining different classifiers outperformed other single
classifiers for predicting student performance.
Abstract: Corporate social responsibility (CSR) viewpoint have challenged the traditional perception to understand corporations position. Production- and managerial-centred views are expanding towards reference group-centred policies. Consequently, the significance of new kind of knowledge has emerged. In addition to management of the organisation, the idea of CSR emphasises the importance to recognise the value-expectations of operational environment. It is know that management is often well-aware of corporate social responsibilities, but it is less clear how well these high level goals are understood in practical product design and development work. In this study, the apprehension above proved to be real to some degree. While management was very aware of CSR it was less familiar to designers. The outcome shows that it is essential to raise ethical values and issues higher in corporate communication, if it is wished that they materialize also in products.
Abstract: An induced graphoidal cover of a graph G is a collection ψ of (not necessarily open) paths in G such that every path in ψ has at least two vertices, every vertex of G is an internal vertex of at most one path in ψ, every edge of G is in exactly one path in ψ and every member of ψ is an induced cycle or an induced path. The minimum cardinality of an induced graphoidal cover of G is called the induced graphoidal covering number of G and is denoted by ηi(G) or ηi. Here we find induced graphoidal cover for some classes of graphs.
Abstract: Landfill gas, particularly methane is one of the
greenhouse gases which contributes to global warming. This paper presents the findings of a study on methane gas production from
simulated landfill reactor under saturated conditions. A reactor was constructed to represent a landfill cell of 2.5 m thickness on sandy
soil. The reactor was 0.2 m in diameter and 4 m in height. One meter of sand and pebble layer was packed at the bottom of the reactor
followed by 2.5 m of solid waste layer and 0.4 m of sand layer as the cover soil. Degradation of waste in the solid waste layer was at
acidification stage as indicated by the leachate quality with COD as
high as 55,511 mg/L and pH as low as 5.1. However, methanogenic
environment was established at the bottom sand layer after one year of operation indicated by pH of 7.2 and methane gas generation.
Leachate degradation took place as the leachate moved through the
sand layer at an infiltration of rate 0.7 cm/day. This resulted in landfill gas production of 77 mL/day/kg containing 55 to 65% methane. The application of sand layer contributed to the gas
production from landfill by an in-situ degradation of leachate in the
sand at the bottom of the landfill.