Abstract: In this paper we present two novel 1-bit full adder
cells in dynamic logic style. NP-CMOS (Zipper) and Multi-Output
structures are used to design the adder blocks. Characteristic of
dynamic logic leads to higher speeds than the other standard static
full adder cells. Using HSpice and 0.18┬Ám CMOS technology
exhibits a significant decrease in the cell delay which can result in a
considerable reduction in the power-delay product (PDP). The PDP
of Multi-Output design at 1.8v power supply is around 0.15 femto
joule that is 5% lower than conventional dynamic full adder cell and
at least 21% lower than other static full adders.
Abstract: Fermented beverages have high expression in the
market for beverages in general, is increasingly valued in situations
where the characteristic aroma and flavor of the material that gave
rise to them are kept after processing. This study aimed to develop a
distilled beverage from passion fruit, and assess, by sensory tests and
chromatographic profile, the influence of different treatments (FM1-
spirit with pulp addiction and FM2 – spirit with bigger ratio of pulp
in must) in the setting of volatiles in the fruit drink, and performing
chemical characterization taking into account the main parameters of
quality established by the legislation. The chromatograms and the
first sensorial tests had indicated that sample FM1 possess better
characteristics of aroma, as much of how much quantitative the
qualitative point of view. However, it analyzes it sensorial end
(preference test) disclosed the biggest preference of the cloth provers
for sample FM2-2 (note 7.93), being the attributes of decisive color
and flavor in this reply, confirmed for the observed values lowest of
fixed and total acidity in the samples of treatment FM2.
Abstract: Two freshwater fishes, Rasbora sumatrana
(Cyprinidae) and Poecilia reticulata (guppy) (Poeciliidae) were
exposed for a four-day period in the laboratory condition to a range
of copper (Cu) and cadmium (Cd) concentrations. Mortality was
assessed and median lethal concentrations (LC50) were calculated.
LC50 increased with decrease in mean exposure times for both metals.
For R. sumatrana, LC50s for 24, 48, 72 and 96 hours for Cu were
54.2, 30.3, 18.9 and 5.6 μg/L and for Cd 1440.2, 459.3, 392.3 and
101.6 μg/L respectively. For P. reticulata, LC50s for 24, 48, 72 and
96 hours for Cu were 348.9, 145.4, 61.3 and 37.9 μg/L and for Cd
8205.6, 2827.1, 405.8 and 168.1 μg/L, respectively. Results indicated
that the Cu was more toxic than Cd to both fishes (Cu>Cd) and R.
sumatrana was more sensitive than P. reticulata to the metals.
Abstract: This paper develops driver reaction-time models for
car-following analysis based on human factors. The reaction time
was classified as brake-reaction time (BRT) and
acceleration/deceleration reaction time (ADRT). The BRT occurs
when the lead vehicle is barking and its brake light is on, while the
ADRT occurs when the driver reacts to adjust his/her speed using the
gas pedal only. The study evaluates the effect of driver
characteristics and traffic kinematic conditions on the driver reaction
time in a car-following environment. The kinematic conditions
introduced urgency and expectancy based on the braking behaviour
of the lead vehicle at different speeds and spacing. The kinematic
conditions were used for evaluating the BRT and are classified as
normal, surprised, and stationary. Data were collected on a driving
simulator integrated into a real car and included the BRT and ADRT
(as dependent variables) and driver-s age, gender, driving experience,
driving intensity (driving hours per week), vehicle speed, and
spacing (as independent variables). The results showed that there was
a significant difference in the BRT at normal, surprised, and
stationary scenarios and supported the hypothesis that both urgency
and expectancy had significant effects on BRT. Driver-s age, gender,
speed, and spacing were found to be significant variables for the
BRT in all scenarios. The results also showed that driver-s age and
gender were significant variables for the ADRT. The research
presented in this paper is part of a larger project to develop a driversensitive
in-vehicle rear-end collision warning system.
Abstract: The fuzzy set theory has been applied in many fields,
such as operations research, control theory, and management
sciences, etc. In particular, an application of this theory in decision
making problems is linear programming problems with fuzzy
numbers. In this study, we present a new method for solving fuzzy
number linear programming problems, by use of linear ranking
function. In fact, our method is similar to simplex method that was
used for solving linear programming problems in crisp environment
before.
Abstract: ICA which is generally used for blind source separation
problem has been tested for feature extraction in Speech recognition
system to replace the phoneme based approach of MFCC. Applying
the Cepstral coefficients generated to ICA as preprocessing has
developed a new signal processing approach. This gives much better
results against MFCC and ICA separately, both for word and speaker
recognition. The mixing matrix A is different before and after MFCC
as expected. As Mel is a nonlinear scale. However, cepstrals
generated from Linear Predictive Coefficient being independent
prove to be the right candidate for ICA. Matlab is the tool used for
all comparisons. The database used is samples of ISOLET.
Abstract: Technology changes have been acknowledged as a
critical factor in determining competitiveness of organization. Under
such environment, the right anticipation of technology change has
been of huge importance in strategic planning. To monitor technology
change, technology forecasting (TF) is frequently utilized. In
academic perspective, TF has received great attention for a long time.
However, few researches have been conducted to provide overview of
the TF literature. Even though some studies deals with review of TF
research, they generally focused on type and characteristics of various
TF, so hardly provides information about patterns of TF research and
which TF method is used in certain technology industry. Accordingly,
this study profile developments in and patterns of scholarly research in
TF over time. Also, this study investigates which technology
industries have used certain TF method and identifies their
relationships. This study will help in understanding TF research trend
and their application area.
Abstract: In order to calculate the flexural strength of
normal-strength concrete (NSC) beams, the nonlinear actual concrete
stress distribution within the compression zone is normally replaced
by an equivalent rectangular stress block, with two coefficients of α
and β to regulate the intensity and depth of the equivalent stress
respectively. For NSC beams design, α and β are usually assumed
constant as 0.85 and 0.80 in reinforced concrete (RC) codes. From an
earlier investigation of the authors, α is not a constant but significantly
affected by flexural strain gradient, and increases with the increasing
of strain gradient till a maximum value. It indicates that larger
concrete stress can be developed in flexure than that stipulated by
design codes. As an extension and application of the authors- previous
study, the modified equivalent concrete stress block is used here to
produce a series of design charts showing the maximum design limits
of flexural strength and ductility of singly- and doubly- NSC beams,
through which both strength and ductility design limits are improved
by taking into account strain gradient effect.
Abstract: In this paper, we focus on the problem of driving and
herding a collection of autonomous actors to a given area. Then, a
new method based on multi-agent coordination is proposed for
solving the problem.
In our proposed method, we assume that the environment is
covered by sensors. When an event is occurred, sensors forward
information to a sink node. Based on received information, the sink
node will estimate the direction and the speed of movement of actors
and announce the obtained value to the actors. The actors coordinate
to reach the target location.
Abstract: Solar water heating (SWH) systems are gaining popularity in ASEAN in the midst of increasing number of affluent population in society and environmental concerns from seemingly unchanged reliance on fossil-based fuels. The penetration of these systems and technologies into ASEAN markets is a welcome development; however there is a need for the method of assessment of their thermal performances. This paper discusses the reasons for this need and a suitable method for thermal performance evaluation of SWH systems in ASEAN. The paper also calls on research to be focused on the establishment of reliable data to be entered into the performance rating software. The establishment of accredited solar systems testing facilities can help boost the competitiveness of ASEAN solar industry.
Abstract: We consider the development of an eight order Adam-s
type method, with A-stability property discussed by expressing them
as a one-step method in higher dimension. This makes it suitable
for solving variety of initial-value problems. The main method and
additional methods are obtained from the same continuous scheme
derived via interpolation and collocation procedures. The methods
are then applied in block form as simultaneous numerical integrators
over non-overlapping intervals. Numerical results obtained using the
proposed block form reveals that it is highly competitive with existing
methods in the literature.
Abstract: This paper focuses on the 3D reconstruction of
the architectural design of Darul Ridzuan Museum. It has
concentrated on designing exterior part of the building according
to colored digital photo of the real museum. Besides viewing the
architecture, walkthroughs are generated for the user to control
it in an easier way. User can travel through the museum to get
the feel of the environment and to explore the design of the
museum as a whole; both exterior and interior. The result has
shown positive result in terms of realism, navigation, collision
detection, suitability, usability and user-s acceptance. In brief,
the 3D virtual museum has provided an alternative to present a
real museum.
Abstract: There has been a growing interest in the field of
bio-mimetic robots that resemble the shape of an insect or an aquatic
animal, among many others. One bio-mimetic robot serves the
purpose of exploring pipelines, spotting any troubled areas or
malfunctions and reporting its data. Moreover, the robot is able to
prepare for and react to any abnormal routes in the pipeline. In order
to move effectively inside a pipeline, the robot-s movement will
resemble that of a lizard. When situated in massive pipelines with
complex routes, the robot places fixed sensors in several important
spots in order to complete its monitoring. This monitoring task is to
prevent a major system failure by preemptively recognizing any minor
or partial malfunctions. Areas uncovered by fixed sensors are usually
impossible to provide real-time observation and examination, and thus
are dependant on periodical offline monitoring. This paper provides
the Monitoring System that is able to monitor the entire area of
pipelines–with and without fixed sensors–by using the bio-mimetic
robot.
Abstract: The spin (ms) and orbital (mo) magnetic moment of
the antiferromagnetic NiO and MnO have been studied in the local
spin density approximation (LSDA+U) within full potential linear
muffin-tin orbital (FP-LMTO method with in the coulomb interaction
U varying from 0 to 10eV, exchange interaction J, from 0 to 1.0eV,
and volume compression VC in range of 0 to 80%. Our calculated
results shown that the spin magnetic moments and the orbital
magnetic moments increase linearly with increasing U and J. While
the interesting behaviour appears when volume compression is
greater than 70% for NiO and 50% for MnO at which ms collapses.
Further increase of volume compression to be at 80% leads to the
disappearance of both magnetic moments.
Abstract: De novo genome assembly is always fragmented. Assembly fragmentation is more serious using the popular next generation sequencing (NGS) data because NGS sequences are shorter than the traditional Sanger sequences. As the data throughput of NGS is high, the fragmentations in assemblies are usually not the result of missing data. On the contrary, the assembled sequences, called contigs, are often connected to more than one other contigs in a complicated manner, leading to the fragmentations. False connections in such complicated connections between contigs, named a contig graph, are inevitable because of repeats and sequencing/assembly errors. Simplifying a contig graph by removing false connections directly improves genome assembly. In this work, we have developed a tool, SIMGraph, to resolve ambiguous connections between contigs using NGS data. Applying SIMGraph to the assembly of a fungus and a fish genome, we resolved 27.6% and 60.3% ambiguous contig connections, respectively. These results can reduce the experimental efforts in resolving contig connections.
Abstract: Construction of tunnels is connected with high
uncertainty in the field of costs, construction period, safety and
impact on surroundings. Risk management became therefore a
common part of tunnel projects, especially after a set of fatal
collapses occurred in 1990's. Such collapses are caused usually by
combination of factors that can be divided into three main groups, i.e.
unfavourable geological conditions, failures in the design and
planning or failures in the execution.
This paper suggests a procedure enabling quantification of the
excavation risk related to extraordinary accidents using FTA and
ETA tools. It will elaborate on a common process of risk analysis and
enable the transfer of information and experience between particular
tunnel construction projects. Further, it gives a guide for designers,
management and other participants, how to deal with risk of such
accidents and how to make qualified decisions based on a
probabilistic approach.
Abstract: This paper presents a semi-supervised learning algorithm called Iterative-Cross Training (ICT) to solve the Web pages classification problems. We apply Inductive logic programming (ILP) as a strong learner in ICT. The objective of this research is to evaluate the potential of the strong learner in order to boost the performance of the weak learner of ICT. We compare the result with the supervised Naive Bayes, which is the well-known algorithm for the text classification problem. The performance of our learning algorithm is also compare with other semi-supervised learning algorithms which are Co-Training and EM. The experimental results show that ICT algorithm outperforms those algorithms and the performance of the weak learner can be enhanced by ILP system.
Abstract: In this work, we experimentally study heat transfer
from exhaust particulate air of detergent spray drying tower to water
by using coiled tube heat exchanger. Water flows in the coiled
tubes, where air loaded with detergent particles of 43 micrometers
in diameter flows within the shell. Four coiled tubes with different
coil pitches are used in a counter-current flow configuration. We
investigate heat transfer coefficients of inside and outside the heat
transfer surfaces through 400 experiments. The correlations between
Nusselt number and Reynolds number, Prandtl number, mass flow
rate of particulates to mass flow rate of air ratio and coiled tube
pitch parameter are proposed. The correlations procured can be used
to predicted heat transfer between tube and shell of the heat
exchanger.
Abstract: Rapid enlargement and physical development of cities
have facilitated the emergence of a number of city life crises and
decrease of environment quality. Subsequently, the need for noticing
the concept of quality and its improvement in urban environments,
besides quantitative issues, is obviously recognized. In the domain of
urban ideas the importance of taking these issues into consideration
is obvious not only in accordance to sustainable development
concepts and improvement of public environment quality, but also in
the enhancement of social and behavioral models.
The major concern of present article is to study the nature of urban
environment quality in urban development plans, which is important
not only in the concept and the aim of projects but also in their
execution procedure. As a result, this paper is going to utilize
planning capacities caused by environmental virtues in the planning
procedure of Moft Abad neighborhood. Thus, at the first step,
applying the Analytical Hierarchy Process (AHP), it has assessed
quantitative environmental issues. The present conditions of Moft
Abad state that “the neighborhood is generally suffering from the
lack of qualitative parameters, and the previously formed planning
procedures could not take the sustainable and developmental paths
which are aimed at environment quality virtues." The diminution of
economical and environmental virtues has resulted in the diminution
of residential and social virtues. Therefore, in order to enhance the
environment quality in Moft Abad, the present paper has tried to
supply the subject plans in order to make a safe, healthy, and lively
neighborhood.
Abstract: Short circuit currents plays a vital role in influencing the design and operation of equipment and power system and could not be avoided despite careful planning and design, good maintenance and thorough operation of the system. This paper discusses the short circuit analysis conducted in KSO briefly comprising of its significances, methods and results. A result sample of the analysis based on a single transformer is detailed in this paper. Furthermore, the results of the analysis and its significances were also discussed and commented.