Abstract: The method described in this paper deals with the problems of T-wave detection in an ECG. Determining the position of a T-wave is complicated due to the low amplitude, the ambiguous and changing form of the complex. A wavelet transform approach handles these complications therefore a method based on this concept was developed. In this way we developed a detection method that is able to detect T-waves with a sensitivity of 93% and a correct-detection ratio of 93% even with a serious amount of baseline drift and noise.
Abstract: In this study, noise characteristics of structure were analyzed in an effort to reduce noise passing through an opening of an
enclosure surrounding the structure that generates noise. Enclosures
are essential measure to protect noise propagation from operating machinery. Access openings of the enclosures are important path of noise leakage. First, noise characteristics of structure were analyzed
and feed-forward noise control was performed using simulation in
order to reduce noise passing through the opening of enclosure, which
surrounds a structure generating noise. We then implemented a
feed-forward controller to actively control the acoustic power through
the opening. Finally, we conducted optimization of placement of the
reference sensors for several cases of the number of sensors. Good
control performances were achieved using the minimum number of microphones arranged an optimal placement.
Abstract: In this work, we present a comparison between
different techniques of image compression. First, the image is
divided in blocks which are organized according to a certain scan.
Later, several compression techniques are applied, combined or
alone. Such techniques are: wavelets (Haar's basis), Karhunen-Loève
Transform, etc. Simulations show that the combined versions are the
best, with minor Mean Squared Error (MSE), and higher Peak Signal
to Noise Ratio (PSNR) and better image quality, even in the presence
of noise.
Abstract: Whit the increasing of traffic, noise emanated from
motor vehicles increases as well, which subsequently causes adding
to the stress of modern city. Thus, it is needed to look for most
critical areas in terms of environmental and social impact of noise.
There are several critical situations for noise emanated from motor
vehicles such as stop and go situation which usually occurs near
junctions or at-grade intersections. This study was conducted in two
locations, most common types of intersections, crossroads and Tjunctions.
The highest average noise levels are recorded during Go
phase for T-junction, 64.4 dB, and Drive phase for crossroad, 64 dB.
It implies that the existence of intersection caused the noise level to
increase. The vehicles starting to move produce more sound than
when they travel at a constant speed along the intersection. It is
suggested that special considerations and priority of allocating funds
should be given to these critical spots.
Abstract: Oil debris signal generated from the inductive oil
debris monitor (ODM) is useful information for machine condition
monitoring but is often spoiled by background noise. To improve the
reliability in machine condition monitoring, the high-fidelity signal
has to be recovered from the noisy raw data. Considering that the noise
components with large amplitude often have higher frequency than
that of the oil debris signal, the integral transform is proposed to
enhance the detectability of the oil debris signal. To cancel out the
baseline wander resulting from the integral transform, the empirical
mode decomposition (EMD) method is employed to identify the trend
components. An optimal reconstruction strategy including both
de-trending and de-noising is presented to detect the oil debris signal
with less distortion. The proposed approach is applied to detect the oil
debris signal in the raw data collected from an experimental setup. The
result demonstrates that this approach is able to detect the weak oil
debris signal with acceptable distortion from noisy raw data.
Abstract: Noise causes significant sensibility changes on a human. This study investigated the effect of five different noises on electroencephalogram (EEG) and subjective evaluation. Six human subjects were exposed to classic piano, ocean wave, alarm in army, ambulance, mosquito noise and EEG data were collected during the experimental session. Alpha band activity in the mosquito noise was smaller than that in the classic piano. Alpha band activity decreased 43.4 ± 8.2 % in the mosquito noise. On the other hand, Beta band activity in the mosquito noise was greater than that in the classic piano. Beta band activity increased 60.1 ± 10.7 % in the mosquito noise. The advances from this study may aid the product design process with human sensibility engineering. This result may provide useful information in designing a human-oriented product to avoid the stress.
Abstract: In Orthogonal Frequency Division Multiplexing (OFDM) systems, the peak to average power ratio (PAR) is much high. The clipping signal scheme is a useful method to reduce PAR. Clipping the OFDM signal, however, increases the overall noise level by introducing clipping noise. It is necessary to recover the figure of the original signal at receiver in order to reduce the clipping noise. Considering the continuity of the signal and the figure of the peak, we obtain a certain conic function curve to replace the clipped signal module within the clipping time. The results of simulation show that the proposed scheme can reduce the systems? BER (bit-error rate) 10 times when signal-to-interference-and noise-ratio (SINR) equals to 12dB. And the BER performance of the proposed scheme is superior to that of kim's scheme, too.
Abstract: In this paper we use the property of co-occurrence
matrix in finding parallel lines in binary pictures for fingerprint
identification. In our proposed algorithm, we reduce the noise by
filtering the fingerprint images and then transfer the fingerprint
images to binary images using a proper threshold. Next, we divide
the binary images into some regions having parallel lines in the same
direction. The lines in each region have a specific angle that can be
used for comparison. This method is simple, performs the
comparison step quickly and has a good resistance in the presence of
the noise.
Abstract: We present a new algorithm for nonlinear dimensionality reduction that consistently uses global information, and that enables understanding the intrinsic geometry of non-convex manifolds. Compared to methods that consider only local information, our method appears to be more robust to noise. Unlike most methods that incorporate global information, the proposed approach automatically handles non-convexity of the data manifold. We demonstrate the performance of our algorithm and compare it to state-of-the-art methods on synthetic as well as real data.
Abstract: In this paper, we propose a new class of Volterra series based filters for image enhancement and restoration. Generally the linear filters reduce the noise and cause blurring at the edges. Some nonlinear filters based on median operator or rank operator deal with only impulse noise and fail to cancel the most common Gaussian distributed noise. A class of second order Volterra filters is proposed to optimize the trade-off between noise removal and edge preservation. In this paper, we consider both the Gaussian and mixed Gaussian-impulse noise to test the robustness of the filter. Image enhancement and restoration results using the proposed Volterra filter are found to be superior to those obtained with standard linear and nonlinear filters.
Abstract: Edge detection is usually the first step in medical
image processing. However, the difficulty increases when a
conventional kernel-based edge detector is applied to ultrasonic
images with a textural pattern and speckle noise. We designed an
adaptive diffusion filter to remove speckle noise while preserving the
initial edges detected by using a Sobel edge detector. We also propose
a genetic algorithm for edge selection to form complete boundaries of
the detected entities. We designed two fitness functions to evaluate
whether a criterion with a complex edge configuration can render a
better result than a simple criterion such as the strength of gradient.
The edges obtained by using a complex fitness function are thicker and
more fragmented than those obtained by using a simple fitness
function, suggesting that a complex edge selecting scheme is not
necessary for good edge detection in medical ultrasonic images;
instead, a proper noise-smoothing filter is the key.
Abstract: Phase locked loops in 10 Gb/s and faster data links are
low phase noise devices. Characterization of their phase jitter
transfer functions is difficult because the intrinsic noise of the PLLs
is comparable to the phase noise of the reference clock signal. The
problem is solved by using a linear model to account for the intrinsic
noise. This study also introduces a novel technique for measuring the
transfer function. It involves the use of the reference clock as a
source of wideband excitation, in contrast to the commonly used
sinusoidal excitations at discrete frequencies. The data reported here
include the intrinsic noise of a PLL for 10 Gb/s links and the jitter
transfer function of a PLL for 12.8 Gb/s links. The measured transfer
function suggests that the PLL responded like a second order linear
system to a low noise reference clock.
Abstract: In the context of spectrum surveillance, a new method
to recover the code of spread spectrum signal is presented, while the
receiver has no knowledge of the transmitter-s spreading sequence. In
our previous paper, we used Genetic algorithm (GA), to recover
spreading code. Although genetic algorithms (GAs) are well known
for their robustness in solving complex optimization problems, but
nonetheless, by increasing the length of the code, we will often lead
to an unacceptable slow convergence speed. To solve this problem we
introduce Particle Swarm Optimization (PSO) into code estimation in
spread spectrum communication system. In searching process for
code estimation, the PSO algorithm has the merits of rapid
convergence to the global optimum, without being trapped in local
suboptimum, and good robustness to noise. In this paper we describe
how to implement PSO as a component of a searching algorithm in
code estimation. Swarm intelligence boasts a number of advantages
due to the use of mobile agents. Some of them are: Scalability, Fault
tolerance, Adaptation, Speed, Modularity, Autonomy, and
Parallelism. These properties make swarm intelligence very attractive
for spread spectrum code estimation. They also make swarm
intelligence suitable for a variety of other kinds of channels. Our
results compare between swarm-based algorithms and Genetic
algorithms, and also show PSO algorithm performance in code
estimation process.
Abstract: This paper attempts to explore a new method to
improve the teaching of algorithmic for beginners. It is well known
that algorithmic is a difficult field to teach for teacher and complex to
assimilate for learner. These difficulties are due to intrinsic
characteristics of this field and to the manner that teachers (the
majority) apprehend its bases. However, in a Technology Enhanced
Learning environment (TEL), assessment, which is important and
indispensable, is the most delicate phase to implement, for all
problems that generate (noise...). Our objective registers in the
confluence of these two axes. For this purpose, EASEL focused
essentially to elaborate an assessment approach of algorithmic
competences in a TEL environment. This approach consists in
modeling an algorithmic solution according to basic and elementary
operations which let learner draw his/her own step with all autonomy
and independently to any programming language. This approach
assures a trilateral assessment: summative, formative and diagnostic
assessment.
Abstract: Assessment for image quality traditionally needs its
original image as a reference. The conventional method for assessment
like Mean Square Error (MSE) or Peak Signal to Noise Ratio (PSNR)
is invalid when there is no reference. In this paper, we present a new
No-Reference (NR) assessment of image quality using blur and noise.
The recent camera applications provide high quality images by help of
digital Image Signal Processor (ISP). Since the images taken by the
high performance of digital camera have few blocking and ringing
artifacts, we only focus on the blur and noise for predicting the
objective image quality. The experimental results show that the
proposed assessment method gives high correlation with subjective
Difference Mean Opinion Score (DMOS). Furthermore, the proposed
method provides very low computational load in spatial domain and
similar extraction of characteristics to human perceptional assessment.
Abstract: New regulations and standards for noise emission increasingly compel the automotive firms to make some improvements about decreasing the engine noise. Nowadays, the perforated reactive mufflers which have an effective damping capability are specifically used for this purpose. New designs should be analyzed with respect to both acoustics and back pressure. In this study, a reactive perforated muffler is investigated numerically and experimentally. For an acoustical analysis, the transmission loss which is independent of sound source of the present cross flow, the perforated muffler was analyzed by COMSOL. To be able to validate the numerical results, transmission loss was measured experimentally. Back pressure was obtained based on the flow field analysis and was also compared with experimental results. Numerical results have an approximate error of 20% compared to experimental results.
Abstract: The performance of an image filtering system depends
on its ability to detect the presence of noisy pixels in the image. Most
of the impulse detection schemes assume the presence of salt and
pepper noise in the images and do not work satisfactorily in case of
uniformly distributed impulse noise. In this paper, a new algorithm is
presented to improve the performance of switching median filter in
detection of uniformly distributed impulse noise. The performance of
the proposed scheme is demonstrated by the results obtained from
computer simulations on various images.
Abstract: An investigation of noise in a micro stepping motor is
considered to study in this article. Because of the trend towards higher
precision and more and more small 3C (including Computer,
Communication and Consumer Electronics) products, the micro
stepping motor is frequently used to drive the micro system or the
other 3C products. Unfortunately, noise in a micro stepped motor is
too large to accept by the customs. To depress the noise of a micro
stepped motor, the dynamic characteristics in this system must be
studied. In this article, a Visual Basic (VB) computer program speed
controlled micro stepped motor in a digital camera is investigated.
Karman KD2300-2S non-contract eddy current displacement sensor,
probe microphone, and HP 35670A analyzer are employed to analyze
the dynamic characteristics of vibration and noise in a motor. The
vibration and noise measurement of different type of bearings and
different treatment of coils are compared. The rotating components,
bearings, coil, etc. of the motor play the important roles in producing
vibration and noise. It is found that the noise will be depressed about
3~4 dB and 6~7 dB, when substitutes the copper bearing with plastic
one and coats the motor coil with paraffin wax, respectively.
Abstract: The backpropagation algorithm in general employs quadratic error function. In fact, most of the problems that involve minimization employ the Quadratic error function. With alternative error functions the performance of the optimization scheme can be improved. The new error functions help in suppressing the ill-effects of the outliers and have shown good performance to noise. In this paper we have tried to evaluate and compare the relative performance of complex valued neural network using different error functions. During first simulation for complex XOR gate it is observed that some error functions like Absolute error, Cauchy error function can replace Quadratic error function. In the second simulation it is observed that for some error functions the performance of the complex valued neural network depends on the architecture of the network whereas with few other error functions convergence speed of the network is independent of architecture of the neural network.
Abstract: In this paper, we have compared the performance of a Turbo and Trellis coded optical code division multiple access (OCDMA) system. The comparison of the two codes has been accomplished by employing optical orthogonal codes (OOCs). The Bit Error Rate (BER) performances have been compared by varying the code weights of address codes employed by the system. We have considered the effects of optical multiple access interference (OMAI), thermal noise and avalanche photodiode (APD) detector noise. Analysis has been carried out for the system with and without double optical hard limiter (DHL). From the simulation results it is observed that a better and distinct comparison can be drawn between the performance of Trellis and Turbo coded systems, at lower code weights of optical orthogonal codes for a fixed number of users. The BER performance of the Turbo coded system is found to be better than the Trellis coded system for all code weights that have been considered for the simulation. Nevertheless, the Trellis coded OCDMA system is found to be better than the uncoded OCDMA system. Trellis coded OCDMA can be used in systems where decoding time has to be kept low, bandwidth is limited and high reliability is not a crucial factor as in local area networks. Also the system hardware is less complex in comparison to the Turbo coded system. Trellis coded OCDMA system can be used without significant modification of the existing chipsets. Turbo-coded OCDMA can however be employed in systems where high reliability is needed and bandwidth is not a limiting factor.