Abstract: The dynamical contouring error is a critical element for the accuracy of machine tools. The contouring error is defined as the difference between the processing actual path and commanded path, which is implemented by following the command curves from feeding driving system in machine tools. The contouring error is resulted from various factors, such as the external loads, friction, inertia moment, feed rate, speed control, servo control, and etc. Thus, the study proposes a 2D compensating system for the contouring accuracy of machine tools. Optical method is adopted by using stable frequency laser diode and the high precision position sensor detector (PSD) to performno-contact measurement. Results show the related accuracy of position sensor detector (PSD) of 2D contouring accuracy compensating system was ±1.5 μm for a calculated range of ±3 mm, and improvement accuracy is over 80% at high-speed feed rate.
Abstract: We focus on the excitation and propagation properties
of surface plasmon polariton (SPP). We have developed a SPP
excitation device in combination with a grating structures fabricated
by using the scanning probe lithography. Perturbation approach was
used to investigate the coupling properties of SPP with a spatial
harmonic wave supported by a metallic grating. A phase shift grating
SPP coupler has been fabricated and the optical property was
evaluated by the Fraunhofer diffraction formula. We have been
experimentally confirmed the induced stop band by diffraction
measurement. We have also observed the wavenumber shift of the
resonance condition of SPP owing to effect of a phase shift.
Abstract: Noise contamination in a magnetic resonance (MR)
image could occur during acquisition, storage, and transmission in
which effective filtering is required to avoid repeating the MR
procedure. In this paper, an iterative asymmetrical triangle fuzzy
filter with moving average center (ATMAVi filter) is used to reduce
different levels of salt and pepper noise in a brain MR image. Besides
visual inspection on filtered images, the mean squared error (MSE) is
used as an objective measurement. When compared with the median
filter, simulation results indicate that the ATMAVi filter is effective
especially for filtering a higher level noise (such as noise density =
0.45) using a smaller window size (such as 3x3) when operated
iteratively or using a larger window size (such as 5x5) when operated
non-iteratively.
Abstract: The objective of this study was to develop and compare alternative prediction equations of lean meat proportion (LMP) of lamb carcasses. Forty (40) male lambs, 22 of Churra Galega Bragançana Portuguese local breed and 18 of Suffolk breed were used. Lambs were slaughtered, and carcasses weighed approximately 30 min later in order to obtain hot carcass weight (HCW). After cooling at 4º C for 24-h a set of seventeen carcass measurements was recorded. The left side of carcasses was dissected into muscle, subcutaneous fat, inter-muscular fat, bone, and remainder (major blood vessels, ligaments, tendons, and thick connective tissue sheets associated with muscles), and the LMP was evaluated as the dissected muscle percentage. Prediction equations of LMP were developed, and fitting quality was evaluated through the coefficient of determination of estimation (R2 e) and standard error of estimate (SEE). Models validation was performed by k-fold crossvalidation and the coefficient of determination of prediction (R2 p) and standard error of prediction (SEP) were computed. The BT2 measurement was the best single predictor and accounted for 37.8% of the LMP variation with a SEP of 2.30%. The prediction of LMP of lamb carcasses can be based simple models, using as predictors the HCW and one fat thickness measurement.
Abstract: WLAN Positioning has been presented by many
approaches in literatures using the characteristics of Received Signal
Strength (RSS), Time of Arrival (TOA) or Time Difference of
Arrival (TDOA), Angle of Arrival (AOA) and cell ID. Among these,
RSS approach is the simplest method to implement because there is
no need of modification on both access points and client devices
whereas its accuracy is terrible due to physical environments. For
TOA or TDOA approach, the accuracy is quite acceptable but most
researches have to modify either software or hardware on existing
WLAN infrastructure. The scales of modifications are made on only
access card up to the changes in protocol of WLAN. Hence, it is an
unattractive approach to use TOA or TDOA for positioning system.
In this paper, the new concept of merging both RSS and TOA
positioning techniques is proposed. In addition, the method to
achieve TOA characteristic for positioning WLAN user without any
extra modification necessarily appended in the existing system is
presented. The measurement results confirm that the proposed
technique using both RSS and TOA characteristics provides better
accuracy than using only either RSS or TOA approach.
Abstract: In this paper, we propose a Perceptually Optimized Foveation based Embedded ZeroTree Image Coder (POEFIC) that introduces a perceptual weighting to wavelet coefficients prior to control SPIHT encoding algorithm in order to reach a targeted bit rate with a perceptual quality improvement with respect to a given bit rate a fixation point which determines the region of interest ROI. The paper also, introduces a new objective quality metric based on a Psychovisual model that integrates the properties of the HVS that plays an important role in our POEFIC quality assessment. Our POEFIC coder is based on a vision model that incorporates various masking effects of human visual system HVS perception. Thus, our coder weights the wavelet coefficients based on that model and attempts to increase the perceptual quality for a given bit rate and observation distance. The perceptual weights for all wavelet subbands are computed based on 1) foveation masking to remove or reduce considerable high frequencies from peripheral regions 2) luminance and Contrast masking, 3) the contrast sensitivity function CSF to achieve the perceptual decomposition weighting. The new perceptually optimized codec has the same complexity as the original SPIHT techniques. However, the experiments results show that our coder demonstrates very good performance in terms of quality measurement.
Abstract: Majority of Business Software Systems (BSS)
Development and Enhancement Projects (D&EP) fail to meet criteria
of their effectiveness, what leads to the considerable financial losses.
One of the fundamental reasons for such projects- exceptionally low
success rate are improperly derived estimates for their costs and time.
In the case of BSS D&EP these attributes are determined by the work
effort, meanwhile reliable and objective effort estimation still appears
to be a great challenge to the software engineering. Thus this paper is
aimed at presenting the most important synthetic conclusions coming
from the author-s own studies concerning the main factors of
effective BSS D&EP work effort estimation. Thanks to the rational
investment decisions made on the basis of reliable and objective
criteria it is possible to reduce losses caused not only by abandoned
projects but also by large scale of overrunning the time and costs of
BSS D&EP execution.
Abstract: Biochemical Oxygen Demand (BOD) is a measure of
the oxygen used in bacteria mediated oxidation of organic substances
in water and wastewater. Theoretically an infinite time is required for
complete biochemical oxidation of organic matter, but the
measurement is made over 5-days at 20 0C or 3-days at 27 0C test
period with or without dilution. Researchers have worked to further
reduce the time of measurement.
The objective of this paper is to review advancement made in
BOD measurement primarily to minimize the time and negate the
measurement difficulties. Survey of literature review in four such
techniques namely BOD-BARTTM, Biosensors, Ferricyanidemediated
approach, luminous bacterial immobilized chip method.
Basic principle, method of determination, data validation and their
advantage and disadvantages have been incorporated of each of the
methods.
In the BOD-BARTTM method the time lag is calculated for the
system to change from oxidative to reductive state. BIOSENSORS
are the biological sensing element with a transducer which produces
a signal proportional to the analyte concentration. Microbial species
has its metabolic deficiencies. Co-immobilization of bacteria using
sol-gel biosensor increases the range of substrate. In ferricyanidemediated
approach, ferricyanide has been used as e-acceptor instead
of oxygen. In Luminous bacterial cells-immobilized chip method,
bacterial bioluminescence which is caused by lux genes was
observed. Physiological responses is measured and correlated to
BOD due to reduction or emission.
There is a scope to further probe into the rapid estimation of BOD.
Abstract: The purpose of this study is to revisit the concept of
rape as represented by professionals in the literature as well as its
perception (beliefs and attitudes) in the population at large and to
propose methodological improvements to its measurement tool. Rape
is a serious crime threatening its victim-s physical and mental health
and integrity; and as such is legally prosecuted in all modern
societies. The problem is not in accepting or rejecting rape as a
criminal act, but rather in the vagueness of its interpretations and
“justifications" maintained in the mentality of modern societies -
known in the literature as the phenomenon of "rape-myth". The rapemyth
can be studied from different perspectives: criminology,
sociology, ethics, medicine and psychology. Its investigation requires
rigorous scientific objectivity, free of passion (victims of rape are at
risk of emotional bias), free of activism (social activists, even if wellintentioned
are also biased), free of any pre-emptive assumptions or
prejudices. To apply a rigorous scientific procedure, we need a solid,
valid and reliable measurement. Rape is a form of heterosexual or
homosexual aggression, violently forcing the victim to give-in in the
sexual activity of the aggressor against her/his will. Human beings
always try to “understand" or find a reason justifying their acts.
Psychological literature provides multiple clinical and experimental
examples of it; just to mention the famous studies by Milgram on the
level of electroshock delivered by the “teacher" towards the “learner"
if “scientifically justifiable" or the studies on the behavior of
“prisoners" and the “guards" and many other experiments and field
observations. Sigmund Freud presented the phenomenon of
unconscious justification and called it rationalization. The multiple
justifications, rationalizations and repeated opinions about sexual
behavior contribute to a myth maintained in the society. What kind of
“rationale" our societies apply to “understand" the non-consensual
sexual behavior? There are many, just to mention few:
• Sex is a ludistic activity for both participants, therefore –
even if not consented – it should bring pleasure to both.
• Everybody wants sex, but only men are allowed to manifest
it openly while women have to pretend the opposite, thus men have
to initiate sexual behavior and women would follow.
• A person who strongly needs sex is free to manifest it and
struggle to get it; the person who doesn-t want it must not reveal
her/his sexual attraction and avoid risky situations; otherwise she/he
is perceived as a promiscuous seducer.
• A person who doesn-t fight against the sexual initiator
unconsciously accepts the rape (does it explain why homosexual
rapes are reported less frequently than rapes against women?).
• Women who are raped deserve it because their wardrobe is
very revealing and seducing and they ''willingly'' go to highly risky
places (alleys, dark roads, etc.).
• Men need to ventilate their sexual energy and if they are
deprived of a partner their urge to have sex is difficult to control.
• Men are supposed to initiate and insist even by force to have
sex (their testosterone makes them both sexual and aggressive).
The paper overviews numerous cultural beliefs about masculine
versus feminine behavior and their impact on the “rape myth".
Abstract: Properties of cement pastes with fine-ground ceramics
used as an alternative binder replacing Portland cement up to 20% of
its mass are investigated. At first, the particle size distribution of
cement and fine-ground ceramics is measured using laser analyser.
Then, the material properties are studied in the early hardening
period up to 28 days. The hydration process of studied materials is
monitored by electrical conductivity measurement using TDR
sensors. The changes of materials- structures within the hardening are
observed using pore size distribution measurement. The compressive
strength measurements are done as well. Experimental results show
that the replacement of Portland cement by fine-ground ceramics in
the amount of up to 20% by mass is acceptable solution from the
mechanical point of view. One can also assume similar physical
properties of designed materials to the reference material with only
Portland cement as binder.
Abstract: Capacitive electrocardiogram (ECG) measurement is an attractive approach for long-term health monitoring. However, there is little literature available on its implementation, especially for multichannel system in standard ECG leads. This paper begins from the design criteria for capacitive ECG measurement and presents a multichannel limb-lead capacitive ECG system with conductive fabric tapes pasted on a double layer PCB as the capacitive sensors. The proposed prototype system incorporates a capacitive driven-body (CDB) circuit to reduce the common-mode power-line interference (PLI). The presented prototype system has been verified to be stable by theoretic analysis and practical long-term experiments. The signal quality is competitive to that acquired by commercial ECG machines. The feasible size and distance of capacitive sensor have also been evaluated by a series of tests. From the test results, it is suggested to be greater than 60 cm2 in sensor size and be smaller than 1.5 mm in distance for capacitive ECG measurement.
Abstract: The so-called all-pass filter circuits are commonly
used in the field of signal processing, control and measurement.
Being connected to capacitive loads, these circuits tend to loose their
stability; therefore the elaborate analysis of their dynamic behavior is
necessary. The compensation methods intending to increase the
stability of such circuits are discussed in this paper, including the socalled
lead-lag compensation technique being treated in detail. For
the dynamic modeling, a two-port network model of the all-pass filter
is being derived. The results of the model analysis show, that
effective lead-lag compensation can be achieved, alone by the
optimization of the circuit parameters; therefore the application of
additional electric components are not needed to fulfill the stability
requirement.
Abstract: Estimation of voltage stability based on optimal
filtering method is presented. PV curve is used as a tool for voltage stability analysis. Dynamic voltage stability estimation is done by
using particle filter method. Optimum value (nose point) of PV curve can be estimated by estimating parameter of PV curve equation
optimal value represents critical voltage and
condition at specified point of measurement. Voltage stability is then estimated by analyzing loading margin condition c stimating equation. This
maximum loading
ecified dynamically.
Abstract: Failure in mastery of motor skills proficiency during
childhood has been seen as a detrimental factor for children to be
physically active. Lack of motor skills proficiency tends to reduce
children’s competency and confidence level to participate in physical
activity. As a consequence of less participation in physical activity,
children will turn to be overweight and obese. It has been suggested
that children who master motor skill proficiency will be more
involved in physical activity thus preventing them from being
overweight. Obesity has become a serious childhood health issues
worldwide. Previous studies have found that children who were
overweight and obese were generally less active however these
studies focused on one gender. This study aims to compare motor
skill proficiency of underweight, normal-weight, overweight and
obese young boys as well as to determine the relationship between
motor skills proficiency and body composition. 112 boys aged
between 8 to 10 years old participated in this study. Participants were
assigned to four groups; underweight, normal-weight, overweight and
obese using BMI-age percentile chart for children. Bruininks-
Oseretsky Test Second Edition-Short Form was administered to
assess their motor skill proficiency. Meanwhile, body composition
was determined by the skinfold thickness measurement. Result
indicated that underweight and normal children were superior in
motor skills proficiency compared to overweight and obese children
(p < 0.05). A significant strong inverse correlation between motor
skills proficiency and body composition (r = -0.849) is noted. The
findings of this study could be explained by non-contributory mass
that carried by overweight and obese children leads to biomechanical
movement inefficiency which will become detrimental to motor skills
proficiency. It can be concluded that motor skills proficiency is
inversely correlated with body composition.
Abstract: Controlled release urea has become popular in agricultural industry as it helps to solve environmental issues and increase crop yield. Recently biomass was identified to replace the polymer used as a coating material in the conventional coated urea. In this paper spreading and contact angle of biomass droplet (lignin, cellulose and clay) on urea surface are investigated experimentally. There were two tests were conducted, sessile drop for contact angle measurement and pendant drop for contact angle measurement. A different concentration of biomass droplet was released from 30 mm above a substrate. Glass was used as a controlled substrate. Images were recorded as soon as the droplet impacted onto the urea before completely adsorb into the urea. Digitized droplets were then used to identify the droplet-s surface tension and contact angle. There is large difference observed between the low surface tension and high surface tension liquids, where the wetting and spreading diameter is higher for lower surface tension. From the contact angle results, the data showed that the biomass coating films were possible as wetting liquid (θ < 90º). Contact angle of biomass coating material gives good indication for the wettablity of a liquid on urea surface.
Abstract: The new idea of this research is application of a new fault detection and isolation (FDI) technique for supervision of sensor networks in transportation system. In measurement systems, it is necessary to detect all types of faults and failures, based on predefined algorithm. Last improvements in artificial neural network studies (ANN) led to using them for some FDI purposes. In this paper, application of new probabilistic neural network features for data approximation and data classification are considered for plausibility check in temperature measurement. For this purpose, two-phase FDI mechanism was considered for residual generation and evaluation.
Abstract: The interrelationship between international stock
markets has been a key study area among the financial market
researchers for international portfolio management and risk
measurement. The characteristics of security returns and their
dynamics play a vital role in the financial market theory. This study
is an attempt to find out the dynamic linkages among the equity
market of USA and emerging markets of Pakistan and India using
daily data covering the period of January 2003–December 2009. The
study utilizes Johansen (Journal of Economic Dynamics and Control,
12, 1988) and Johansen and Juselius (Oxford Bulletin of Economics
and Statistics, 52, 1990) cointegration procedure for long run
relationship and Granger-causality tests based on Toda and
Yamamoto (Journal of Econometrics, 66, 1995) methodology.
No cointegration was found among stock markets of USA, Pakistan
and India, while Granger-causality test showed the evidence of
unidirectional causality running from New York stock exchange to
Bombay and Karachi stock exchanges.
Abstract: The fuzzy technique is an operator introduced in order
to simulate at a mathematical level the compensatory behavior in
process of decision making or subjective evaluation. The following
paper introduces such operators on hand of computer vision
application.
In this paper a novel method based on fuzzy logic reasoning
strategy is proposed for edge detection in digital images without
determining the threshold value. The proposed approach begins by
segmenting the images into regions using floating 3x3 binary matrix.
The edge pixels are mapped to a range of values distinct from each
other. The robustness of the proposed method results for different
captured images are compared to those obtained with the linear Sobel
operator. It is gave a permanent effect in the lines smoothness and
straightness for the straight lines and good roundness for the curved
lines. In the same time the corners get sharper and can be defined
easily.
Abstract: An on-line condition monitoring method for transmission line is proposed using electrical circuit theory and IT technology in this paper. It is reasonable that the circuit parameters such as resistance (R), inductance (L), conductance (g) and capacitance (C) of a transmission line expose the electrical conditions and physical state of the line. Those parameters can be calculated from the linear equation composed of voltages and currents measured by synchro-phasor measurement technique at both end of the line. A set of linear voltage drop equations containing four terminal constants (A, B ,C ,D ) are mathematical models of the transmission line circuits. At least two sets of those linear equations are established from different operation condition of the line, they may mathematically yield those circuit parameters of the line. The conditions of line connectivity including state of connecting parts or contacting parts of the switching device may be monitored by resistance variations during operation. The insulation conditions of the line can be monitored by conductance (g) and capacitance(C) measurements. Together with other condition monitoring devices such as partial discharge, sensors and visual sensing device etc.,they may give useful information to monitor out any incipient symptoms of faults. The prototype of hardware system has been developed and tested through laboratory level simulated transmission lines. The test has shown enough evident to put the proposed method to practical uses.
Abstract: In this paper, we propose a Perceptually Optimized Embedded ZeroTree Image Coder (POEZIC) that introduces a perceptual weighting to wavelet transform coefficients prior to control SPIHT encoding algorithm in order to reach a targeted bit rate with a perceptual quality improvement with respect to the coding quality obtained using the SPIHT algorithm only. The paper also, introduces a new objective quality metric based on a Psychovisual model that integrates the properties of the HVS that plays an important role in our POEZIC quality assessment. Our POEZIC coder is based on a vision model that incorporates various masking effects of human visual system HVS perception. Thus, our coder weights the wavelet coefficients based on that model and attempts to increase the perceptual quality for a given bit rate and observation distance. The perceptual weights for all wavelet subbands are computed based on 1) luminance masking and Contrast masking, 2) the contrast sensitivity function CSF to achieve the perceptual decomposition weighting, 3) the Wavelet Error Sensitivity WES used to reduce the perceptual quantization errors. The new perceptually optimized codec has the same complexity as the original SPIHT techniques. However, the experiments results show that our coder demonstrates very good performance in terms of quality measurement.