Abstract: This paper presents one comprehensive modelling approach for maintenance scheduling problem of thermal power units in competitive market. This problem is formulated as a 0/1 mixedinteger linear programming model. Model incorporates long-term bilateral contracts with defined profiles of power and price, and weekly forecasted market prices for market auction. The effectiveness of the proposed model is demonstrated through case study with detailed discussion.
Abstract: The alumosilicate ceramics with mullite crystalline phase are used in various branches of science and technique. The mullite refractory ceramics with high porosity serve as a heat insulator and as a constructional materials [1], [2]. The purpose of the work was to sinter high porosity ceramic and to increase the quantity of mullite phase in this mullite, mullite-corundum ceramics. Two types of compositions were prepared at during the experiment. The first type is compositions with commercial alumina and silica oxides. The second type is from mixing these oxides with 10, 20 and 30 wt.%. of kaolin. In all samples the Al2O3 and SiO2 were in 2.57:1 ratio, because that was conformed to mullite stechiometric compositions (3Al2O3.2SiO2). The types of alumina oxides were α-Al2O3 (d50=4µm) and γ-Al2O3 (d50=80µm). Ratios of α-: γ-Al2O3 were (1:1) or (1:3). The porous materials were prepared by slip casting of suspension of raw materials. The aluminium paste (0.18 wt.%) was used as a pore former. Water content in the suspensions was 26-47 wt.%. Pore formation occurred as a result of hydrogen formation in chemical reaction between aluminium paste and water [2]. The samples were sintered at the temperature of 1650°C and 1750°C for one hour. The increasing amount of kaolin, α-: γ-Al2O3 at the ratio (1:3) and sintering at the highest temperature raised the quantity of mullite phase. The mullite phase began to dominate over the corundum phase.
Abstract: Bead-on-plate welds were carried out on AISI 316L
(N) austenitic stainless steel (ASS) using flux cored arc welding
(FCAW) process. The bead on plates weld was conducted as per L25
orthogonal array. In this paper, the weld bead geometry such as depth
of penetration (DOP), bead width (BW) and weld reinforcement (R)
of AISI 316L (N) ASS are investigated. Taguchi approach is used as
statistical design of experiment (DOE) technique for optimizing the
selected welding input parameters. Grey relational analysis and
desirability approach are applied to optimize the input parameters
considering multiple output variables simultaneously. Confirmation
experiment has also been conducted to validate the optimized
parameters.
Abstract: Climate change could lead to changes in cultural
environments and landscapes as we know them.Climate change
presents an immediate and significant threat to our natural and built
environments and to the ways of life which co-exist with these
environments. In most traditional buildings, the harmony of texture
with nature and environment has been ever considered; so houses and
cities have been mixed with their natural environment so
astonishingly and the selection and usage of materials have been in
such a way that they have provided the utmost conformity with the
environment, as the result the created areas have a unique beauty and
attraction.The extent to which climate change contributes to
destruction procedure on Iran-s historic buildings.is a subject of
current discussion. Cities, towns and built-up areas also have their
own characteristics that might make them particularly vulnerable to
climate change.
Abstract: This research gathered local wisdom towards career building of people in Kamchanoad Community, Baan Muang sub-district, Baan Dung district, Udon Thani province. Data was collected through in-depth interviews with village headmen, community board, teachers, monks, Kamchanoad forest managers and revered elderly aged over 60 years old. All of these 30 interviewees have resided in Kamchanoad Community for more than 40. Descriptive data analysis result revealed that the most prominent local wisdom of Kamchanoad community is their beliefs and religion. Most people in the community have strongly maintained local tradition, the festival of appeasing Chao Pu Sri Suttho on the middle of the 6th month of Thai lunar calendar which falls on the same day with Vesak Day. 100 percent of the people in this community are Buddhist. They believe that Naga, an entity or being, taking the form of a serpent, named “Sri Suttho” lives in Kamchanoad forest. The local people worship the serpent and ask for blessings. Another local wisdom of this community is Sinh fabric weaving.
Abstract: Policy management in organizations became rising issue in the last decade. It’s because of today’s regulatory requirements in the organizations. To manage policies in large organizations is an imperative work. However, major challenges facing organizations in the last decade is managing all the policies in the organization and making them an active documents rather than simple (inactive) documents stored in computer hard drive or on a shelf. Because of this challenge, organizations need policy management program. This policy management program can be either manual or automated. This paper presents suggestions towards managing policies in organizations. As well as possible policy management solution or program to be utilized, manual or automated. The research first examines the models and frameworks used for managing policies from various perspectives in the literature of the research area/domain. At the end of this paper, a policy management framework is proposed for managing enterprise policies effectively and in a simplified manner.
Abstract: Functionalities and control behavior are both primary
requirements in design of a complex system. Automata theory plays
an important role in modeling behavior of a system. Z is an ideal
notation which is used for describing state space of a system and then
defining operations over it. Consequently, an integration of automata
and Z will be an effective tool for increasing modeling power for a
complex system. Further, nondeterministic finite automata (NFA)
may have different implementations and therefore it is needed to
verify the transformation from diagrams to a code. If we describe
formal specification of an NFA before implementing it, then
confidence over transformation can be increased. In this paper, we
have given a procedure for integrating NFA and Z. Complement of a
special type of NFA is defined. Then union of two NFAs is
formalized after defining their complements. Finally, formal
construction of intersection of NFAs is described. The specification
of this relationship is analyzed and validated using Z/EVES tool.
Abstract: There have been numerous implementations of
security system using biometric, especially for identification and
verification cases. An example of pattern used in biometric is the iris
pattern in human eye. The iris pattern is considered unique for each
person. The use of iris pattern poses problems in encoding the human
iris.
In this research, an efficient iris recognition method is proposed.
In the proposed method the iris segmentation is based on the
observation that the pupil has lower intensity than the iris, and the
iris has lower intensity than the sclera. By detecting the boundary
between the pupil and the iris and the boundary between the iris and
the sclera, the iris area can be separated from pupil and sclera. A step
is taken to reduce the effect of eyelashes and specular reflection of
pupil. Then the four levels Coiflet wavelet transform is applied to the
extracted iris image. The modified Hamming distance is employed to
measure the similarity between two irises.
This research yields the identification success rate of 84.25% for
the CASIA version 1.0 database. The method gives an accuracy of
77.78% for the left eyes of MMU 1 database and 86.67% for the
right eyes. The time required for the encoding process, from the
segmentation until the iris code is generated, is 0.7096 seconds.
These results show that the accuracy and speed of the method is
better than many other methods.
Abstract: This research project aims to investigate difference in
relative rates concerning phosphoryl transfer relevant to biological
catalysis of DNA and RNA in the pH-independent reactions.
Activated Models of DNA and RNA for alkyl-aryl phosphate diesters
(with 4-nitrophenyl as a good leaving group) have successfully been
prepared to gather kinetic parameters. Eyring plots for the pH–
independent hydrolysis of 1 and 2 were established at different
temperatures in the range 100–160 °C. These measurements have
been used to provide a better estimate for the difference in relative
rates between the reactivity of DNA and RNA cleavage. Eyring plot
gave an extrapolated rate of kH2O = 1 × 10-10 s -1 for 1 (RNA model)
and 2 (DNA model) at 25°C. Comparing the reactivity of RNA
model and DNA model shows that the difference in relative rates in
the pH-independent reactions is surprisingly very similar at 25°. This
allows us to obtain chemical insights into how biological catalysts
such as enzymes may have evolved to perform their current
functions.
Abstract: Phase locked loops in 10 Gb/s and faster data links are
low phase noise devices. Characterization of their phase jitter
transfer functions is difficult because the intrinsic noise of the PLLs
is comparable to the phase noise of the reference clock signal. The
problem is solved by using a linear model to account for the intrinsic
noise. This study also introduces a novel technique for measuring the
transfer function. It involves the use of the reference clock as a
source of wideband excitation, in contrast to the commonly used
sinusoidal excitations at discrete frequencies. The data reported here
include the intrinsic noise of a PLL for 10 Gb/s links and the jitter
transfer function of a PLL for 12.8 Gb/s links. The measured transfer
function suggests that the PLL responded like a second order linear
system to a low noise reference clock.
Abstract: In this study, the problem of discriminating between interictal epileptic and non- epileptic pathological EEG cases, which present episodic loss of consciousness, investigated. We verify the accuracy of the feature extraction method of autocross-correlated coefficients which extracted and studied in previous study. For this purpose we used in one hand a suitable constructed artificial supervised LVQ1 neural network and in other a cross-correlation technique. To enforce the above verification we used a statistical procedure which based on a chi- square control. The classification and the statistical results showed that the proposed feature extraction is a significant accurate method for diagnostic discrimination cases between interictal and non-interictal EEG events and specifically the classification procedure showed that the LVQ neural method is superior than the cross-correlation one.
Abstract: In order to achieve competitive advantage and better
performance of firm, supply chain management (SCM) strategy
should support and drive forward business strategy. It means that
supply chain should be aligned with business strategy, at the same
time supply chain (SC) managers need to use appropriate information
system (IS) solution to support their strategy, which would lead to
stay competitive. There are different kinds of IS strategies which
enable managers to meet the SC requirement by selecting the best IS
strategy. Therefore, it is important to align IS strategies and practices
with SC strategies and practices, which could help us to plan for an
IS application that supports and enhances a SCMS. In this study,
aligning IS with SC in strategy level is considered. The main aim of
this paper is to align the various IS strategies with SCM strategies
and demonstrate their impact on SC and firm performance.
Abstract: The purpose of this research aims to discover the
knowledge for analysis student motivation behavior on e-Learning
based on Data Mining Techniques, in case of the Information
Technology for Communication and Learning Course at Suan
Sunandha Rajabhat University. The data mining techniques was
applied in this research including association rules, classification
techniques. The results showed that using data mining technique can
indicate the important variables that influence the student motivation
behavior on e-Learning.
Abstract: Due to its capability to resist jamming signals, chirp
spread spectrum (CSS) technique has attracted much attention in
the area of wireless communications. However, there has been little
rigorous analysis for the performance of the CSS communication
system in jamming environments. In this paper, we present analytic
results on the performance of a CSS system by deriving symbol
error rate (SER) expressions for a CSS M-ary phase shift keying
(MPSK) system in the presence of broadband and tone jamming
signals, respectively. The numerical results show that the empirical
SER closely agrees with the analytic result.
Abstract: The growing interest on national heritage
preservation has led to intensive efforts on digital documentation of
cultural heritage knowledge. Encapsulated within this effort is the
focus on ontology development that will help facilitate the
organization and retrieval of the knowledge. Ontologies surrounding
cultural heritage domain are related to archives, museum and library
information such as archaeology, artifacts, paintings, etc. The growth
in number and size of ontologies indicates the well acceptance of its
semantic enrichment in many emerging applications. Nowadays,
there are many heritage information systems available for access.
Among others is community-based e-museum designed to support the
digital cultural heritage preservation. This work extends previous
effort of developing the Traditional Malay Textile (TMT) Knowledge
Model where the model is designed with the intention of auxiliary
mapping with CIDOC CRM. Due to its internal constraints, the
model needs to be transformed in advance. This paper addresses the
issue by reviewing the previous harmonization works with CIDOC
CRM as exemplars in refining the facets in the model particularly
involving TMT-Artifact class. The result is an extensible model
which could lead to a common view for automated mapping with
CIDOC CRM. Hence, it promotes integration and exchange of
textile information especially batik-related between communities in
e-museum applications.
Abstract: This paper presents a new method for estimating the nonstationary
noise power spectral density given a noisy signal. The
method is based on averaging the noisy speech power spectrum using
time and frequency dependent smoothing factors. These factors are
adjusted based on signal-presence probability in individual frequency
bins. Signal presence is determined by computing the ratio of the
noisy speech power spectrum to its local minimum, which is updated
continuously by averaging past values of the noisy speech power
spectra with a look-ahead factor. This method adapts very quickly to
highly non-stationary noise environments. The proposed method
achieves significant improvements over a system that uses voice
activity detector (VAD) in noise estimation.
Abstract: The study aims to investigate the impact on board and
audit committee characteristics and firm performance before and
after the revision of MCCG (2007) on GLCs over the period 2005-2010. We used Return on Assets (ROA) as a proxy for firm performance. The data consists of two groups; data collected before
and after the amendments of MCCG (2007). Findings show that
boards of directors with accounting / finance qualifications (BEXP)
are statistically significant with performance for period before the amendments. As for audit committee members with accounting or
finance qualifications (ACEXP), correlation results indicate a
negative association and non-significant results for the years before
amendments. However, the years after the amendments show
positive relationship with highly significant correlations (1%) to ROA. This indicates that the amendments of MCCG 2007 on the
audit committee members- literacy in accounting have impacted the governance structures and performance of GLCs.
Abstract: In aircraft applications, according to the nature of
electrical equipment its location may be in unpressurized area or very
close to the engine; thus, the environmental conditions may change
from atmospheric pressure to less than 100 mbar, and the temperature
may be higher than the ambient one as in most real working
conditions of electrical equipment. Then, the classical Paschen curve
has to be replotted since these parameters may affect the discharge
ignition voltage. In this paper, we firstly investigate the domain of
validity of two corrective expressions on the Paschen-s law found in
the literature, in case of changing the air environment and known as
Peek and Dunbar corrections. Results show that these corrections are
no longer valid for combined variation of temperature and pressure.
After that, a new empirical expression for breakdown voltage is
proposed and is validated in the case of combined variations of
temperature and pressure.
Abstract: This paper presents performance analysis of the
Evolutionary Programming-Artificial Neural Network (EPANN)
based technique to optimize the architecture and training parameters
of a one-hidden layer feedforward ANN model for the prediction of
energy output from a grid connected photovoltaic system. The ANN
utilizes solar radiation and ambient temperature as its inputs while the
output is the total watt-hour energy produced from the grid-connected
PV system. EP is used to optimize the regression performance of the
ANN model by determining the optimum values for the number of
nodes in the hidden layer as well as the optimal momentum rate and
learning rate for the training. The EPANN model is tested using two
types of transfer function for the hidden layer, namely the tangent
sigmoid and logarithmic sigmoid. The best transfer function, neural
topology and learning parameters were selected based on the highest
regression performance obtained during the ANN training and testing
process. It is observed that the best transfer function configuration for
the prediction model is [logarithmic sigmoid, purely linear].
Abstract: This paper has two main ideas. Firstly, it describes Evans and Wurster-s concepts “the trade-off between reach and richness", and relates them to the impact of technology on the virtual markets. Authors Evans and Wurster see the transfer of information as a 'trade'off between richness and reach-. Reach refers to the number of people who share particular information, with Richness ['Rich'] being a more complex concept combining: bandwidth, customization, interactivity, reliability, security and currency. Traditional shopping limits the number of shops the shopper is able to visit due to time and other cost constraints; the time spent traveling consequently leaves the shopper with less time to evaluate the product. The paper concludes that although the Web provides Reach, offering Richness and the sense of community required for creating and sustaining relationships with potential clients could be difficult.