Abstract: Solution of some practical problems is reduced to the
solution of the integro-differential equations. But for the numerical
solution of such equations basically quadrature methods or its
combination with multistep or one-step methods are used. The
quadrature methods basically is applied to calculation of the integral
participating in right hand side of integro-differential equations. As
this integral is of Volterra type, it is obvious that at replacement with
its integrated sum the upper limit of the sum depends on a current
point in which values of the integral are defined. Thus we receive the
integrated sum with variable boundary, to work with is hardly.
Therefore multistep method with the constant coefficients, which is
free from noted lack and gives the way for finding it-s coefficients is
present.
Abstract: Hypertension is characterized with stress on the heart and blood vessels thus increasing the risk of heart attack and renal diseases. The Renin angiotensin system (RAS) plays a major role in blood pressure control. Renin is the enzyme that controls the RAS at the rate-limiting step. Our aim is to develop new drug-like leads which can inhibit renin and thereby emerge as therapeutics for hypertension. To achieve this, molecular dynamics (MD) simulation and receptor-based pharmacophore modeling were implemented, and three rennin-inhibitor complex structures were selected based on IC50 value and scaffolds of inhibitors. Three pharmacophore models were generated considering conformations induced by inhibitor. The compounds mapped to these models were selected and subjected to drug-like screening. The identified hits were docked into the active site of renin. Finally, hit1 satisfying the binding mode and interaction energy was selected as possible lead candidate to be used in novel renin inhibitors.
Abstract: The most common cause of power transformer failures
is mechanical defect brought about by excessive vibration, which is
formed by the combination of multiples of a frequency of 120 Hz. In
this paper, the types of mechanical exciting forces applied to the
power transformer were classified, and the mechanical damage
mechanism of the power transformer was identified using the
vibration transfer route to the machine or structure. The general
effects of 120 Hz-vibration on the enclosure, bushing, Buchholz
relay, pressure release valve and tap changer of the transformer were
also examined.
Abstract: Information society is an absolutely new public formation at which the infrastructure and the social relations correspond to the socialized essence of «information genotype» mankind. Information society is a natural social environment which allows the person to open completely the information nature, to use intelligence for joint creation with other people of new information on the basis of knowledge earlier saved up by previous generations.
Abstract: The effect of nano Co3O4 addition on the
superconducting properties of (Bi, Pb)-2223 system was studied. The
samples were prepared by the acetate coprecipitation method. The
Co3O4 with different sizes (10-30 nm and 30-50 nm) from x=0.00 to
0.05 was added to Bi1.6Pb0.4Sr2Ca2Cu3Oy(Co3O4)x. Phase analysis by
XRD method, microstructural examination by SEM and dc electrical
resistivity by four point probe method were done to characterize the
samples. The X-ray diffraction patterns of all the samples indicated
the majority Bi-2223 phase along with minor Bi-2212 and Bi-2201
phases. The volume fraction was estimated from the intensities of Bi-
2223, Bi-2212 and Bi-2201 phase. The sample with x=0.01 wt% of
the added Co3O4 (10-30 nm size) showed the highest volume fraction
of Bi-2223 phase (72%) and the highest superconducting transition
temperature, Tc (~102 K). The non-added sample showed the highest
Tc(~103 K) compared to added samples with nano Co3O4 (30-50 nm
size) added samples. Both the onset critical temperature Tc(onset)
and zero electrical resistivity temperature Tc(R=0) were in the range
of 103-115 ±1K and 91-103 ±1K respectively for samples with added
Co3O4 (10-30 nm and 30-50 nm).
Abstract: This work presents a recursive identification algorithm. This algorithm relates to the identification of closed loop system with Variable Structure Controller. The approach suggested includes two stages. In the first stage a genetic algorithm is used to obtain the parameters of switching function which gives a control signal rich in commutations (i.e. a control signal whose spectral characteristics are closest possible to those of a white noise signal). The second stage consists in the identification of the system parameters by the instrumental variable method and using the optimal switching function parameters obtained with the genetic algorithm. In order to test the validity of this algorithm a simulation example is presented.
Abstract: Most agricultural crops cultivated in Brazil are highly
nutrient demanding. Brazilian soils are generally acidic with low base
saturation and available nutrients. Demand for fertilizer application
has increased because the national agricultural sector expansion. To
improve productivity without environmental impact, there is the need
for the utilization of novel procedures and techniques to optimize
fertilizer application. This includes the digital soil mapping and GIS
application applied to mapping in different scales. This paper is
based on research, realized during 2005 to 2010 by Brazilian
Corporation for Agricultural Research (EMBRAPA) and its partners.
The purpose was to map soil fertility in national and regional scales.
A soil profile data set in national scale (1:5,000,000) was constructed
from the soil archives of Embrapa Soils, Rio de Janeiro and in the
regional scale (1:250,000) from COMIGO Cooperative soil data set,
Rio Verde, Brazil. The mapping was doing using ArcGIS 9.1 tools
from ESRI.
Abstract: We constructed a method of noise reduction for
JPEG-compressed image based on Bayesian inference using the
maximizer of the posterior marginal (MPM) estimate. In this method,
we tried the MPM estimate using two kinds of likelihood, both of
which enhance grayscale images converted into the JPEG-compressed
image through the lossy JPEG image compression. One is the
deterministic model of the likelihood and the other is the probabilistic
one expressed by the Gaussian distribution. Then, using the Monte
Carlo simulation for grayscale images, such as the 256-grayscale
standard image “Lena" with 256 × 256 pixels, we examined the
performance of the MPM estimate based on the performance measure
using the mean square error. We clarified that the MPM estimate via
the Gaussian probabilistic model of the likelihood is effective for
reducing noises, such as the blocking artifacts and the mosquito noise,
if we set parameters appropriately. On the other hand, we found that
the MPM estimate via the deterministic model of the likelihood is not
effective for noise reduction due to the low acceptance ratio of the
Metropolis algorithm.
Abstract: The given work is devoted to the description of
Information Technologies NAS of Azerbaijan created and
successfully maintained in Institute. On the basis of the decision of
board of the Supreme Certifying commission at the President of the
Azerbaijan Republic and Presidium of National Academy of
Sciences of the Azerbaijan Republic, the organization of training
courses on Computer Sciences for all post-graduate students and
dissertators of the republic, taking of examinations of candidate
minima, it was on-line entrusted to Institute of Information
Technologies of the National Academy of Sciences of Azerbaijan.
Therefore, teaching the computer sciences to post-graduate
students and dissertators a scientific - methodological manual on
effective application of new information technologies for research
works by post-graduate students and dissertators and taking of
candidate minima is carried out in the Educational Center.
Information and communication technologies offer new
opportunities and prospects of their application for teaching and
training. The new level of literacy demands creation of essentially
new technology of obtaining of scientific knowledge. Methods of
training and development, social and professional requirements,
globalization of the communicative economic and political projects
connected with construction of a new society, depends on a level of
application of information and communication technologies in the
educational process. Computer technologies develop ideas of
programmed training, open completely new, not investigated
technological ways of training connected to unique opportunities of
modern computers and telecommunications. Computer technologies
of training are processes of preparation and transfer of the
information to the trainee by means of computer. Scientific and
technical progress as well as global spread of the technologies
created in the most developed countries of the world is the main
proof of the leading role of education in XXI century. Information
society needs individuals having modern knowledge. In practice, all
technologies, using special technical information means (computer,
audio, video) are called information technologies of education.
Abstract: Construction project control attempts to obtain real-time information and effectively enhance dynamic control and management via information sharing and analysis among project participants to eliminate construction conflicts and project delays. However, survey results for Taiwan indicate that construction commercial project management software is not widely accepted for subcontractors and suppliers. To solve the project communications problems among participants, this study presents a novel system called the Construction Dynamic Teams Communication Management (Con-DTCM) system for small-to-medium sized subcontractors and suppliers in Taiwanese Construction industry, and demonstrates that the Con-DTCM system responds to the most recent project information efficiently and enhances management of project teams (general contractor, suppliers and subcontractors) through web-based environment. Web-based technology effectively enhances information sharing during construction project management, and generates cost savings via the Internet. The main unique characteristic of the proposed Con-DTCM system is extremely user friendly and easily design compared with current commercial project management applications. The Con-DTCM system is applied to a case study of construction of a building project in Taiwan to confirm the proposed methodology and demonstrate the effectiveness of information sharing during the construction phase. The advantages of the Con-DTCM system are in improving project control and management efficiency for general contractors, and in providing dynamic project tracking and management, which enables subcontractors and suppliers to acquire the most recent project-related information. Furthermore, this study presents and implements a generic system architecture.
Abstract: Most integrated inertial navigation systems (INS) and
global positioning systems (GPS) have been implemented using the
Kalman filtering technique with its drawbacks related to the need for
predefined INS error model and observability of at least four
satellites. Most recently, a method using a hybrid-adaptive network
based fuzzy inference system (ANFIS) has been proposed which is
trained during the availability of GPS signal to map the error
between the GPS and the INS. Then it will be used to predict the
error of the INS position components during GPS signal blockage.
This paper introduces a genetic optimization algorithm that is used to
update the ANFIS parameters with respect to the INS/GPS error
function used as the objective function to be minimized. The results
demonstrate the advantages of the genetically optimized ANFIS for
INS/GPS integration in comparison with conventional ANFIS
specially in the cases of satellites- outages. Coping with this problem
plays an important role in assessment of the fusion approach in land
navigation.
Abstract: The comparative analysis of different taxonomic
groups of microorganisms isolated from dark chernozem soils under
different agricultures (alfalfa, melilot, sainfoin, soybean, rapeseed) at
Almaty region of Kazakhstan was conducted. It was shown that the
greatest number of micromycetes was typical to the soil planted with
alfalfa and canola. Species diversity of micromycetes markedly
decreases as it approaches the surface of the root, so that the species
composition in the rhizosphere is much more uniform than in the
virgin soil. Promising strains of microscopic fungi and yeast with
plant growth-promoting activity to agricultures were selected. Among
the selected fungi there are representatives of Penicillium bilaiae,
Trichoderma koningii, Fusarium equiseti, Aspergillus ustus. The
highest rates of growth and development of seedlings of plants
observed under the influence of yeasts Aureobasidium pullulans,
Rhodotorula mucilaginosa, Metschnikovia pulcherrima. Using
molecular - genetic techniques confirmation of the identification
results of selected micromycetes was conducted.
Abstract: Automated discovery of Rule is, due to its applicability, one of the most fundamental and important method in KDD. It has been an active research area in the recent past. Hierarchical representation allows us to easily manage the complexity of knowledge, to view the knowledge at different levels of details, and to focus our attention on the interesting aspects only. One of such efficient and easy to understand systems is Hierarchical Production rule (HPRs) system. A HPR, a standard production rule augmented with generality and specificity information, is of the following form: Decision If < condition> Generality Specificity . HPRs systems are capable of handling taxonomical structures inherent in the knowledge about the real world. This paper focuses on the issue of mining Quantified rules with crisp hierarchical structure using Genetic Programming (GP) approach to knowledge discovery. The post-processing scheme presented in this work uses Quantified production rules as initial individuals of GP and discovers hierarchical structure. In proposed approach rules are quantified by using Dempster Shafer theory. Suitable genetic operators are proposed for the suggested encoding. Based on the Subsumption Matrix(SM), an appropriate fitness function is suggested. Finally, Quantified Hierarchical Production Rules (HPRs) are generated from the discovered hierarchy, using Dempster Shafer theory. Experimental results are presented to demonstrate the performance of the proposed algorithm.
Abstract: In this paper the optimal control strategy for
Permanent Magnet Synchronous Motor (PMSM) based drive system
is presented. The designed full optimal control is available for speed
operating range up to base speed. The optimal voltage space-vector
assures input energy reduction and stator loss minimization,
maintaining the output energy in the same limits with the
conventional PMSM electrical drive. The optimal control with three
components is based on the energetically criteria and it is applicable
in numerical version, being a nonrecursive solution. The simulation
results confirm the increased efficiency of the optimal PMSM drive.
The properties of the optimal voltage space vector are shown.
Abstract: The main issue of interest here is whether individuals
who differ in arithmetical reasoning ability and levels of imagery ability display different brain activity during the conduct of mental
arithmetical reasoning tasks. This was a case study of four
participants who represented four extreme combinations of Maths –Imagery abilities: ie., low-low, high-high, high-low, low-high respectively. As the Ps performed a series of 60 arithmetical reasoning tasks, 128-channel EEG recordings were taken and the
pre-response interval subsequently analysed using EGI GeosourceTM
software. The P who was high in both imagery and maths ability
showed peak activity prior to response in BA7 (superior parietal cortex) but other Ps did not show peak activity in this region. The
results are considered in terms of the diverse routes that may be employed by individuals during the conduct of arithmetical reasoning
tasks and the possible implications of this for mathematics education.
Abstract: This paper proposes a new technique based on nonlinear Minmax Detector Based (MDB) filter for image restoration. The aim of image enhancement is to reconstruct the true image from the corrupted image. The process of image acquisition frequently leads to degradation and the quality of the digitized image becomes inferior to the original image. Image degradation can be due to the addition of different types of noise in the original image. Image noise can be modeled of many types and impulse noise is one of them. Impulse noise generates pixels with gray value not consistent with their local neighborhood. It appears as a sprinkle of both light and dark or only light spots in the image. Filtering is a technique for enhancing the image. Linear filter is the filtering in which the value of an output pixel is a linear combination of neighborhood values, which can produce blur in the image. Thus a variety of smoothing techniques have been developed that are non linear. Median filter is the one of the most popular non-linear filter. When considering a small neighborhood it is highly efficient but for large window and in case of high noise it gives rise to more blurring to image. The Centre Weighted Mean (CWM) filter has got a better average performance over the median filter. However the original pixel corrupted and noise reduction is substantial under high noise condition. Hence this technique has also blurring affect on the image. To illustrate the superiority of the proposed approach, the proposed new scheme has been simulated along with the standard ones and various restored performance measures have been compared.
Abstract: This paper investigates the problem of sampling from transactional data streams. We introduce CFISDS as a content based sampling algorithm that works on a landmark window model of data streams and preserve more informed sample in sample space. This algorithm that work based on closed frequent itemset mining tasks, first initiate a concept lattice using initial data, then update lattice structure using an incremental mechanism.Incremental mechanism insert, update and delete nodes in/from concept lattice in batch manner. Presented algorithm extracts the final samples on demand of user. Experimental results show the accuracy of CFISDS on synthetic and real datasets, despite on CFISDS algorithm is not faster than exist sampling algorithms such as Z and DSS.
Abstract: Random and natural textures classification is still
one of the biggest challenges in the field of image processing and
pattern recognition. In this paper, texture feature extraction using
Slant Hadamard Transform was studied and compared to other
signal processing-based texture classification schemes. A
parametric SHT was also introduced and employed for natural
textures feature extraction. We showed that a subtly modified
parametric SHT can outperform ordinary Walsh-Hadamard
transform and discrete cosine transform. Experiments were carried
out on a subset of Vistex random natural texture images using a
kNN classifier.
Abstract: This paper present the study carried out of accident
analysis, black spot study and to develop accident predictive models
based on the data collected at rural roadway, Federal Route 50 (F050)
Malaysia. The road accident trends and black spot ranking were
established on the F050. The development of the accident prediction
model will concentrate in Parit Raja area from KM 19 to KM 23.
Multiple non-linear regression method was used to relate the discrete
accident data with the road and traffic flow explanatory variable. The
dependent variable was modeled as the number of crashes namely
accident point weighting, however accident point weighting have
rarely been account in the road accident prediction Models. The result
show that, the existing number of major access points, without traffic
light, rise in speed, increasing number of Annual Average Daily
Traffic (AADT), growing number of motorcycle and motorcar and
reducing the time gap are the potential contributors of increment
accident rates on multiple rural roadway.
Abstract: Generalized Center String (GCS) problem are
generalized from Common Approximate Substring problem
and Common substring problems. GCS are known to be
NP-hard allowing the problems lies in the explosion of
potential candidates. Finding longest center string without
concerning the sequence that may not contain any motifs is
not known in advance in any particular biological gene
process. GCS solved by frequent pattern-mining techniques
and known to be fixed parameter tractable based on the
fixed input sequence length and symbol set size. Efficient
method known as Bpriori algorithms can solve GCS with
reasonable time/space complexities. Bpriori 2 and Bpriori
3-2 algorithm are been proposed of any length and any
positions of all their instances in input sequences. In this
paper, we reduced the time/space complexity of Bpriori
algorithm by Constrained Based Frequent Pattern mining
(CBFP) technique which integrates the idea of Constraint
Based Mining and FP-tree mining. CBFP mining technique
solves the GCS problem works for all center string of any
length, but also for the positions of all their mutated copies
of input sequence. CBFP mining technique construct TRIE
like with FP tree to represent the mutated copies of center
string of any length, along with constraints to restraint
growth of the consensus tree. The complexity analysis for
Constrained Based FP mining technique and Bpriori
algorithm is done based on the worst case and average case
approach. Algorithm's correctness compared with the
Bpriori algorithm using artificial data is shown.