Abstract: Dengue fever is an important human arboviral disease. Outbreaks are now reported quite often from many parts of the world. The number of cases involving pregnant women and infant cases are increasing every year. The illness is often severe and complications may occur. Deaths often occur because of the difficulties in early diagnosis and in the improper management of the diseases. Dengue antibodies from pregnant women are passed on to infants and this protects the infants from dengue infections. Antibodies from the mother are transferred to the fetus when it is still in the womb. In this study, we formulate a mathematical model to describe the transmission of this disease in pregnant women. The model is formulated by dividing the human population into pregnant women and non-pregnant human (men and non-pregnant women). Each class is subdivided into susceptible (S), infectious (I) and recovered (R) subclasses. We apply standard dynamical analysis to our model. Conditions for the local stability of the equilibrium points are given. The numerical simulations are shown. The bifurcation diagrams of our model are discussed. The control of this disease in pregnant women is discussed in terms of the threshold conditions.
Abstract: In this work, we improve a previously developed
segmentation scheme aimed at extracting edge information from
speckled images using a maximum likelihood edge detector. The
scheme was based on finding a threshold for the probability density
function of a new kernel defined as the arithmetic mean-to-geometric
mean ratio field over a circular neighborhood set and, in a general
context, is founded on a likelihood random field model (LRFM). The
segmentation algorithm was applied to discriminated speckle areas
obtained using simple elliptic discriminant functions based on
measures of the signal-to-noise ratio with fractional order moments.
A rigorous stochastic analysis was used to derive an exact expression
for the cumulative density function of the probability density
function of the random field. Based on this, an accurate probability
of error was derived and the performance of the scheme was
analysed. The improved segmentation scheme performed well for
both simulated and real images and showed superior results to those
previously obtained using the original LRFM scheme and standard
edge detection methods. In particular, the false alarm probability was
markedly lower than that of the original LRFM method with
oversegmentation artifacts virtually eliminated. The importance of
this work lies in the development of a stochastic-based segmentation,
allowing an accurate quantification of the probability of false
detection. Non visual quantification and misclassification in medical
ultrasound speckled images is relatively new and is of interest to
clinicians.
Abstract: The coalescer process is one of the methods for oily water treatment by increasing the oil droplet size in order to enhance the separating velocity and thus effective separation. However, the presence of surfactants in an oily emulsion can limit the obtained mechanisms due to the small oil size related with stabilized emulsion. In this regard, the purpose of this research is to improve the efficiency of the coalescer process for treating the stabilized emulsion. The effects of bed types, bed height, liquid flow rate and stage coalescer (step-bed) on the treatment efficiencies in term of COD values were studied. Note that the treatment efficiency obtained experimentally was estimated by using the COD values and oil droplet size distribution. The study has shown that the plastic media has more effective to attach with oil particles than the stainless one due to their hydrophobic properties. Furthermore, the suitable bed height (3.5 cm) and step bed (3.5 cm with 2 steps) were necessary in order to well obtain the coalescer performance. The application of step bed coalescer process in reactor has provided the higher treatment efficiencies in term of COD removal than those obtained with classical process. The proposed model for predicting the area under curve and thus treatment efficiency, based on the single collector efficiency (ηT) and the attachment efficiency (α), provides relatively a good coincidence between the experimental and predicted values of treatment efficiencies in this study.
Abstract: In this research, the diabetes conditions of people (healthy, prediabete and diabete) were tried to be identified with noninvasive palm perspiration measurements. Data clusters gathered from 200 subjects were used (1.Individual Attributes Cluster and 2. Palm Perspiration Attributes Cluster). To decrase the dimensions of these data clusters, Principal Component Analysis Method was used. Data clusters, prepared in that way, were classified with Support Vector Machines. Classifications with highest success were 82% for Glucose parameters and 84% for HbA1c parametres.
Abstract: Web usage mining has become a popular research
area, as a huge amount of data is available online. These data can be
used for several purposes, such as web personalization, web structure
enhancement, web navigation prediction etc. However, the raw log
files are not directly usable; they have to be preprocessed in order to
transform them into a suitable format for different data mining tasks.
One of the key issues in the preprocessing phase is to identify web
users. Identifying users based on web log files is not a
straightforward problem, thus various methods have been developed.
There are several difficulties that have to be overcome, such as client
side caching, changing and shared IP addresses and so on. This paper
presents three different methods for identifying web users. Two of
them are the most commonly used methods in web log mining
systems, whereas the third on is our novel approach that uses a
complex cookie-based method to identify web users. Furthermore we
also take steps towards identifying the individuals behind the
impersonal web users. To demonstrate the efficiency of the new
method we developed an implementation called Web Activity
Tracking (WAT) system that aims at a more precise distinction of
web users based on log data. We present some statistical analysis
created by the WAT on real data about the behavior of the Hungarian
web users and a comprehensive analysis and comparison of the three
methods
Abstract: Researchers of drug-drug interaction alert systems
have often suggested that there were high overridden rate for alerts and
also too false alerts. However, research about decreasing false alerts is
scant. Therefore, the aim of this article attempts to proactive
identification of false alert for drug-drug interaction and provide
solution to decrease false alerts. This research involved retrospective
analysis prescribing database and calculated false alert rate by using
MYSQL and JAVA. Results of this study showed 17% of false alerts
and the false alert rate in the hospitals (37%) was more than in the
clinics. To conclude, this study described the importance that
drug-drug interaction alert system should not only detect drug name
but also detect frequency or route, as well as in providing solution to
decrease false alerts.
Abstract: Unified Modeling Language (UML) is a standard
language for modeling of a system. UML is used to visually specify
the structure and behavior of a system. The system requirements are
captured and then converted into UML specification. UML
specification uses a set of rules and notations, and diagrams to
specify the system requirements. In this paper, we present a tool for
developing the UML specification. The tool will ease the use of the
notations and diagrams for UML specification as well as increase the
understanding and familiarity of the UML specification. The tool will
also be able to check the conformance of the diagrams against each
other for basic compliance of UML specification.
Abstract: Parsing is important in Linguistics and Natural
Language Processing to understand the syntax and semantics of a
natural language grammar. Parsing natural language text is
challenging because of the problems like ambiguity and inefficiency.
Also the interpretation of natural language text depends on context
based techniques. A probabilistic component is essential to resolve
ambiguity in both syntax and semantics thereby increasing accuracy
and efficiency of the parser. Tamil language has some inherent
features which are more challenging. In order to obtain the solutions,
lexicalized and statistical approach is to be applied in the parsing
with the aid of a language model. Statistical models mainly focus on
semantics of the language which are suitable for large vocabulary
tasks where as structural methods focus on syntax which models
small vocabulary tasks. A statistical language model based on Trigram
for Tamil language with medium vocabulary of 5000 words has
been built. Though statistical parsing gives better performance
through tri-gram probabilities and large vocabulary size, it has some
disadvantages like focus on semantics rather than syntax, lack of
support in free ordering of words and long term relationship. To
overcome the disadvantages a structural component is to be
incorporated in statistical language models which leads to the
implementation of hybrid language models. This paper has attempted
to build phrase structured hybrid language model which resolves
above mentioned disadvantages. In the development of hybrid
language model, new part of speech tag set for Tamil language has
been developed with more than 500 tags which have the wider
coverage. A phrase structured Treebank has been developed with 326
Tamil sentences which covers more than 5000 words. A hybrid
language model has been trained with the phrase structured Treebank
using immediate head parsing technique. Lexicalized and statistical
parser which employs this hybrid language model and immediate
head parsing technique gives better results than pure grammar and
trigram based model.
Abstract: Understanding the consumption and production of
various metabolites of fibroblast conditioned media is needed for its
proper and optimized use in expansion of pluripotent stem cells. For
this purpose, we have used the HPLC method to analyse the
consumption of glucose and the production of lactate over time by
mouse embryonic fibroblasts. The experimental data have also been
compared with mathematical model fits. 0.025 moles of lactate was
produced after 72 hrs while the glucose concentration decreased from
0.017 moles to 0.011 moles. The mathematical model was able to
predict the trends of glucose consumption and lactate production.
Abstract: In this study, workplace environmental monitoring
systems were established using USN(Ubiquitous Sensor Networks)
and LabVIEW. Although existing direct sampling methods enable
finding accurate values as of the time points of measurement, those
methods are disadvantageous in that continuous management and
supervision are difficult and costs for are high when those methods are
used. Therefore, the efficiency and reliability of workplace
management by supervisors are relatively low when those methods are
used. In this study, systems were established so that information on
workplace environmental factors such as temperatures, humidity and
noises is measured and transmitted to the PC in real time to enable
supervisors to monitor workplaces through LabVIEW on the PC.
When any accidents have occurred in workplaces, supervisors can
immediately respond through the monitoring system and this system
enables integrated workplace management and the prevention of
safety accidents. By introducing these monitoring systems, safety
accidents due to harmful environmental factors in workplaces can be
prevented and these monitoring systems will be also helpful in finding
out the correlation between safety accidents and occupational diseases
by comparing and linking databases established by this monitoring
system with existing statistical data.
Abstract: In order to research Internet quantificationally and
better model the performance of network, this paper proposes a novel
AS level network performance model (MNPM), it takes autonomous
system (AS) as basic modeling unit, measures E2E performance
between any two outdegrees of an AS and organizes measurement
results into matrix form which called performance matrix (PM).
Inter-AS performance calculation is defined according to performance
information stored in PM. Simulation has been implemented to verify
the correctness of MNPM and a practical application of MNPM
(network congestion detection) is given.
Abstract: This paper presents a generalized formulation for the
problem of buckling optimization of anisotropic, radially graded,
thin-walled, long cylinders subject to external hydrostatic pressure.
The main structure to be analyzed is built of multi-angle fibrous
laminated composite lay-ups having different volume fractions of the
constituent materials within the individual plies. This yield to a
piecewise grading of the material in the radial direction; that is the
physical and mechanical properties of the composite material are
allowed to vary radially. The objective function is measured by
maximizing the critical buckling pressure while preserving the total
structural mass at a constant value equals to that of a baseline
reference design. In the selection of the significant optimization
variables, the fiber volume fractions adjoin the standard design
variables including fiber orientation angles and ply thicknesses. The
mathematical formulation employs the classical lamination theory,
where an analytical solution that accounts for the effective axial and
flexural stiffness separately as well as the inclusion of the coupling
stiffness terms is presented. The proposed model deals with
dimensionless quantities in order to be valid for thin shells having
arbitrary thickness-to-radius ratios. The critical buckling pressure
level curves augmented with the mass equality constraint are given
for several types of cylinders showing the functional dependence of
the constrained objective function on the selected design variables. It
was shown that material grading can have significant contribution to
the whole optimization process in achieving the required structural
designs with enhanced stability limits.
Abstract: E-Appointment Scheduling (EAS) has been developed
to handle appointment for UMP students, lecturers in Faculty of
Computer Systems & Software Engineering (FCSSE) and Student
Medical Center. The schedules are based on the timetable and
university activities. Constraints Logic Programming (CLP) has been
implemented to solve the scheduling problems by giving
recommendation to the users in part of determining any available
slots from the lecturers and doctors- timetable. By using this system,
we can avoid wasting time and cost because this application will set
an appointment by auto-generated. In addition, this system can be an
alternative to the lecturers and doctors to make decisions whether to
approve or reject the appointments.
Abstract: The mosaicing technique has been employed in more and more application fields, from entertainment to scientific ones. In the latter case, often the final evaluation is still left to human beings, that assess visually the quality of the mosaic. Many times, a lack of objective measurements in microscopic mosaicing may prevent the mosaic from being used as a starting image for further analysis. In this work we analyze three different metrics and indexes, in the domain of signal analysis, image analysis and visual quality, to measure the quality of different aspects of the mosaicing procedure, such as registration errors and visual quality. As the case study we consider the mosaicing algorithm we developed. The experiments have been carried out by considering mosaics with very different features: histological samples, that are made of detailed and contrasted images, and live stem cells, that show a very low contrast and low detail levels.
Abstract: Recently, the advanced technologies that offer high
precision product, relative easy, economical process and also rapid
production are needed to realize the high demand of ultra precision
micro part. In our research, micromanufacturing based on soft
lithography and nanopowder injection molding was investigated. The
silicone metal pattern with ultra thick and high aspect ratio succeeds to
fabricate Polydimethylsiloxane (PDMS) micro mold. The process
followed by nanopowder injection molding (PIM) by a simple vacuum
hot press. The 17-4ph nanopowder with diameter of 100 nm, succeed
to be injected and it forms green sample microbearing with thickness,
microchannel and aspect ratio is 700μm, 60μm and 12, respectively.
Sintering process was done in 1200 C for 2 hours and heating rate
0.83oC/min. Since low powder load (45% PL) was applied to achieve
green sample fabrication, ~15% shrinkage happen in the 86% relative
density. Several improvements should be done to produce high
accuracy and full density sintered part.
Abstract: Proactive coping directed at an upcoming as opposed
to an ongoing stressor, is a new focus in positive psychology. The
present study explored the proactive coping-s effect on the workplace
adaptation after transition from college to workplace. In order to
demonstrate the influence process between them, we constructed the
model of proactive coping style effecting the actual positive coping
efforts and outcomes by mediating proactive competence during one
year after the transition. Participants (n = 100) started to work right
after graduating from college completed all the four time-s surveys
--one month before (Time 0), one month after (Time 1), three months
after (Time 2), and one year after (Time 3) the transition. Time 0
survey included the measurement of proactive coping style and
competence. Time 1, 2, 3 surveys included the measurement of the
challenge cognitive appraisal, problem solving coping strategy, and
subjective workplace adaptation. The result indicated that proactive
coping style effected newcomers- actual coping efforts and outcomes
by mediating proactive coping competence. The result also showed
that proactive coping competence directly promoted Time1-s actual
positive coping efforts and outcomes, and indirectly promoted Time
2-s and Time 3-s.
Abstract: A concrete structure is designed and constructed for its
purpose of use, and is expected to maintain its function for the target
durable years from when it was planned. Nevertheless, as time elapses
the structure gradually deteriorates and then eventually degrades to the
point where the structure cannot exert the function for which it was
planned. The performance of concrete that is able to maintain the level
of the performance required over the designed period of use as it has
less deterioration caused by the elapse of time under the designed
condition is referred to as Durability. There are a number of causes of
durability degradation, but especially chloride damage, carbonation,
freeze-thaw, etc are the main causes. In this study, carbonation, one of
the main causes of deterioration of the durability of a concrete
structure, was investigated via a microstructure analysis technique.
The method for the measurement of carbonation was studied using the
existing indicator method, and the method of measuring the progress
of carbonation in a quantitative manner was simultaneously studied
using a FT-IR (Fourier-Transform Infrared) Spectrometer along with
the microstructure analysis technique.
Abstract: The Taiwan government has started to promote the “Plain Landscape Afforestation and Greening Program" since 2002. A key task of the program was the payment for environmental services (PES), entitled the “Plain Landscape Afforestation Policy" (PLAP), which was certificated by the Executive Yuan on August 31, 2001 and enacted on January 1, 2002. According to the policy, it is estimated that the total area of afforestation will be 25,100 hectares by December 31, 2007. Until the end of 2007, the policy had been enacted for six years in total and the actual area of afforestation was 8,919.18 hectares. Among them, Taiwan Sugar Corporation (TSC) was accounted for 7,960 hectares (with 2,450.83 hectares as public service area) which occupied 86.22% of the total afforestation area; the private farmland promoted by local governments was accounted for 869.18 hectares which occupied 9.75% of the total afforestation area. Based on the above, we observe that most of the afforestation area in this policy is executed by TSC, and the achievement ratio by TSC is better than by others. It implies that the success of the PLAP is seriously related to the execution of TSC. The objective of this study is to analyze the relevant policy planning of TSC-s participation in the PLAP, suggest complementary measures, and draw up effective adjustment mechanisms, so as to improve the effectiveness of executing the policy. Our main conclusions and suggestions are summarized as follows: 1. The main reason for TSC-s participation in the PLAP is based on their passive cooperation with the central government or company policy. Prior to TSC-s participation in the PLAP, their lands were mainly used for growing sugarcane. 2. The main factors of TSC-s consideration on the selection of tree species are based on the suitability of land and species. The largest proportion of tree species is allocated to economic forests, and the lack of technical instruction was the main problem during afforestation. Moreover, the method of improving TSC-s future development in leisure agriculture and landscape business becomes a key topic. 3. TSC has developed short and long-term plans on participating in the PLAP for the future. However, there is no great willingness or incentive on budgeting for such detailed planning. 4. Most people from TSC interviewed consider the requirements on PLAP unreasonable. Among them, an unreasonable requirement on the number of trees accounted for the greatest proportion; furthermore, most interviewees suggested that the government should continue to provide incentives even after 20 years. 5. Since the government shares the same goals as TSC, there should be sufficient cooperation and communication that support the technical instruction and reduction of afforestation cost, which will also help to improve effectiveness of the policy.
Abstract: Kobe City is a metropolis including large suburbs, where housing communities have been developed for many years. People have been recently moving to the urban areas and the suburbs are losing their power to attract population. At the same time, many blocks of high-rise flats have being built near railway stations adjoining town centers, and are drawing people of all generations. Residents with different lifestyle preferences are making good use of town centers and city centers based on effective railway services to live together happily in a household as well as the same flats. Thus railway services can play an essential role in sustainable urban development.
Abstract: This paper addresses the stability of the switched systems with discrete and distributed time delays. By applying Lyapunov functional and function method, we show that, if the norm of system matrices Bi is small enough, the asymptotic stability is always achieved. Finally, a example is provided to verify technically feasibility and operability of the developed results.