Abstract: We study the problem of decision making with Dempster-Shafer belief structure. We analyze the previous work developed by Yager about using the ordered weighted averaging (OWA) operator in the aggregation of the Dempster-Shafer decision process. We discuss the possibility of aggregating with an ascending order in the OWA operator for the cases where the smallest value is the best result. We suggest the introduction of the ordered weighted geometric (OWG) operator in the Dempster-Shafer framework. In this case, we also discuss the possibility of aggregating with an ascending order and we find that it is completely necessary as the OWG operator cannot aggregate negative numbers. Finally, we give an illustrative example where we can see the different results obtained by using the OWA, the Ascending OWA (AOWA), the OWG and the Ascending OWG (AOWG) operator.
Abstract: A simple approach is demonstrated for growing large
scale, nearly vertically aligned ZnO nanowire arrays by thermal
oxidation method. To reveal effect of temperature on growth and
physical properties of the ZnO nanowires, gold coated zinc substrates
were annealed at 300 °C and 400 °C for 4 hours duration in air. Xray
diffraction patterns of annealed samples indicated a set of well
defined diffraction peaks, indexed to the wurtzite hexagonal phase of
ZnO. The scanning electron microscopy studies show formation of
ZnO nanowires having length of several microns and average of
diameter less than 500 nm. It is found that the areal density of wires
is relatively higher, when the annealing is carried out at higher
temperature i.e. at 400°C. From the field emission studies, the values
of the turn-on and threshold field, required to draw emission current
density of 10 μA/cm2 and 100 μA/cm2 are observed to be 1.2 V/μm
and 1.7 V/μm for the samples annealed at 300 °C and 2.9 V/μm and
3.7 V/μm for that annealed at 400 °C, respectively. The field
emission current stability, investigated over duration of more than 2
hours at the preset value of 1 μA, is found to be fairly good in both
cases. The simplicity of the synthesis route coupled with the
promising field emission properties offer unprecedented advantage
for the use of ZnO field emitters for high current density
applications.
Abstract: This paper considers inference under progressive type II censoring with a compound Rayleigh failure time distribution. The maximum likelihood (ML), and Bayes methods are used for estimating the unknown parameters as well as some lifetime parameters, namely reliability and hazard functions. We obtained Bayes estimators using the conjugate priors for two shape and scale parameters. When the two parameters are unknown, the closed-form expressions of the Bayes estimators cannot be obtained. We use Lindley.s approximation to compute the Bayes estimates. Another Bayes estimator has been obtained based on continuous-discrete joint prior for the unknown parameters. An example with the real data is discussed to illustrate the proposed method. Finally, we made comparisons between these estimators and the maximum likelihood estimators using a Monte Carlo simulation study.
Abstract: Medical applications are among the most impactful
areas of microrobotics. The ultimate goal of medical microrobots is
to reach currently inaccessible areas of the human body and carry out
a host of complex operations such as minimally invasive surgery
(MIS), highly localized drug delivery, and screening for diseases at
their very early stages. Miniature, safe and efficient propulsion
systems hold the key to maturing this technology but they pose
significant challenges. A new type of propulsion developed recently,
uses multi-flagella architecture inspired by the motility mechanism of
prokaryotic microorganisms. There is a lack of efficient methods for
designing this type of propulsion system. The goal of this paper is to
overcome the lack and this way, a numerical strategy is proposed to
design multi-flagella propulsion systems. The strategy is based on the
implementation of the regularized stokeslet and rotlet theory, RFT
theory and new approach of “local corrected velocity". The effects of
shape parameters and angular velocities of each flagellum on overall
flow field and on the robot net forces and moments are considered.
Then a multi-layer perceptron artificial neural network is designed
and employed to adjust the angular velocities of the motors for
propulsion control. The proposed method applied successfully on a
sample configuration and useful demonstrative results is obtained.
Abstract: Fault tree analysis is a well-known method for
reliability and safety assessment of engineering systems. In the last 3
decades, a number of methods have been introduced, in the literature,
for automatic construction of fault trees. The main difference between these methods is the starting model from which the tree is constructed. This paper presents a new methodology for the construction of static and dynamic fault trees from a system Simulink
model. The method is introduced and explained in detail, and its correctness and completeness is experimentally validated by using an example, taken from literature. Advantages of the method are also mentioned.
Abstract: E-learning aims to build knowledge and skills in order
to enhance the quality of learning. Research has shown that the
majority of the e-learning solutions lack in pedagogical background
and present some serious deficiencies regarding teaching strategies
and content delivery, time and pace management, interface design
and preservation of learners- focus. The aim of this review is to
approach the design of e-learning solutions with a pedagogical
perspective and to present some good practices of e-learning design
grounded on the core principles of Learning Theories (LTs).
Abstract: Cylindrical concrete reservoirs are appropriate choice
for storing liquids as water, oil and etc. By using of the pre-cast
concrete reservoirs instead of the in-situ constructed reservoirs, the
speed and precision of the construction would considerably increase.
In this construction method, wall and roof panels would make in
factory with high quality materials and precise controlling. Then,
pre-cast wall and roof panels would carry out to the construction site
for assembling. This method has a few faults such as: the existing
weeks in connection of wall panels together and wall panels to
foundation. Therefore, these have to be resisted under applied loads
such as seismic load. One of the innovative methods which was
successfully applied for seismic retrofitting of numerous pre-cast
cylindrical water reservoirs in New Zealand, using of the high tensile
cables around the reservoirs and post-tensioning them. In this paper,
analytical modeling of wall and roof panels and post-tensioned
cables are carried out with finite element method and the effect of
height to diameter ratio, post-tensioning force value, liquid level in
reservoir, installing position of tendons on seismic response of
reservoirs are investigated.
Abstract: Probability-based identity disclosure risk
measurement may give the same overall risk for different
anonymization strategy of the same dataset. Some entities in the
anonymous dataset may have higher identification risks than the
others. Individuals are more concerned about higher risks than the
average and are more interested to know if they have a possibility of
being under higher risk. A notation of overall risk in the above
measurement method doesn-t indicate whether some of the involved
entities have higher identity disclosure risk than the others. In this
paper, we have introduced an identity disclosure risk measurement
method that not only implies overall risk, but also indicates whether
some of the members have higher risk than the others. The proposed
method quantifies the overall risk based on the individual risk values,
the percentage of the records that have a risk value higher than the
average and how larger the higher risk values are compared to the
average. We have analyzed the disclosure risks for different
disclosure control techniques applied to original microdata and
present the results.
Abstract: The performances of small and medium enterprises
have stagnated in the last two decades. This has mainly been due to
the emergence of HIV / Aids. The disease has had a detrimental
effect on the general economy of the country leading to morbidity
and mortality of the Kenyan workforce in their primary age. The
present study sought to establish the economic impact of HIV / Aids
on the micro-enterprise development in Obunga slum – Kisumu, in
terms of production loss, increasing labor related cost and to establish
possible strategies to address the impact of HIV / Aids on microenterprises.
The study was necessitated by the observation that most
micro-enterprises in the slum are facing severe economic and social
crisis due to the impact of HIV / Aids, they get depleted and close
down within a short time due to death of skilled and experience
workforce. The study was carried out between June 2008 and June
2009 in Obunga slum. Data was subjected to computer aided
statistical analysis that included descriptive statistic, chi-squared and
ANOVA techniques. Chi-squared analysis on the micro-enterprise
owners opinion on the impact of HIV / Aids on depletion of microenterprise
compared to other diseases indicated high levels of the
negative effects of the disease at significance levels of P
Abstract: In this research, the flow pattern influence on
performance of a micro PEMFC was investigated
experimentally. The investigation focused on the impacts of
bend angels and rib/channel dimensions of serpentine flow
channel pattern on the performance and investigated how they
improve the performance. The fuel cell employed for these
experiments was a micro single PEMFC with a membrane of
1.44 cm2 Nafion NRE-212. The results show that 60° and 120°
bend angles can provide the better performances at 20 and 40
sccm inlet flow rates comparing to that the conventional design.
Additionally, wider channel with narrower rib spacing gives
better performance. These results may be applied to develop
universal heuristics for the design of flow pattern of micro
PEMFC.
Abstract: In this research, we have developed a new efficient
heuristic algorithm for the dynamic facility layout problem with
budget constraint (DFLPB). This heuristic algorithm combines two
mathematical programming methods such as discrete event
simulation and linear integer programming (IP) to obtain a near
optimum solution. In the proposed algorithm, the non-linear model
of the DFLP has been changed to a pure integer programming (PIP)
model. Then, the optimal solution of the PIP model has been used in
a simulation model that has been designed in a similar manner as the
DFLP for determining the probability of assigning a facility to a
location. After a sufficient number of runs, the simulation model
obtains near optimum solutions. Finally, to verify the performance of
the algorithm, several test problems have been solved. The results
show that the proposed algorithm is more efficient in terms of speed
and accuracy than other heuristic algorithms presented in previous
works found in the literature.
Abstract: Axisymmetric vibration of an infinite Pyrocomposite
circular hollow cylinder made of inner and outer pyroelectric layer of
6mm-class bonded together by a Linear Elastic Material with Voids
(LEMV) layer is studied. The exact frequency equation is obtained
for the traction free surfaces with continuity condition at the
interfaces. Numerical results in the form of data and dispersion
curves for the first and second mode of the axisymmetric vibration of
the cylinder BaTio3 / Adhesive / BaTio3 by taking the Adhesive layer
as an existing Carbon Fibre Reinforced Polymer (CFRP) are
compared with a hypothetical LEMV layer with and without voids
and as well with a pyroelectric hollow cylinder. The damping is
analyzed through the imaginary parts of the complex frequencies.
Abstract: The genre of fantasy depicts a world of imagine that triggers popular interest from a created view of world, and a fantasy is defined as a story that illustrates a world of imagine where scientific or horror elements are stand in its center. This study is not focused on the narrative of the fantasy, i.e. not on the adventurous story, but is concentrated on the image of the fantasy to work on its relationship with intended themes and differences among cultures due to meanings of materials. As for films, we have selected some films in the 2000's that are internationally recognized as expressing unique images of fantasy containing the theme of love in them. The selected films are 5 pieces including two European films, Amelie from Montmartre (2001) and The Science of Sleep (2005) and three Asian films, Citizen Dog from Thailand (2004), Memories of Matsuko from Japan (2006), and I'm a Cyborg, but That's OK from Korea (2006). These films share some common characteristics to the effect that they give tiny lessons and feelings for life with expressions of fantasy images as if they were fairy tales for adults and that they lead the audience to reflect on their days and revive forgotten dreams of childhood. We analyze the images of fantasy in each of the films on the basis of the elements of Mise-en-Scène (setting and props, costume, hair and make-up, facial expressions and body language, lighting and color, positioning of characters, and objects within a frame).
Abstract: In this paper, a two-channel secure communication
using fractional chaotic systems is presented. Conditions for chaos
synchronization have been investigated theoretically by using Laplace
transform. To illustrate the effectiveness of the proposed scheme, a
numerical example is presented. The keys, key space, key selection
rules and sensitivity to keys are discussed in detail. Results show that
the original plaintexts have been well masked in the ciphertexts yet
recovered faithfully and efficiently by the present schemes.
Abstract: This work aims to reduce the read power consumption
as well as to enhance the stability of the SRAM cell during the read
operation. A new 10-transisor cell is proposed with a new read
scheme to minimize the power consumption within the memory core.
It has separate read and write ports, thus cell read stability is
significantly improved. A 16Kb SRAM macro operating at 1V
supply voltage is demonstrated in 65 nm CMOS process. Its read
power consumption is reduced to 24% of the conventional design.
The new cell also has lower leakage current due to its special bit-line
pre-charge scheme. As a result, it is suitable for low-power mobile
applications where power supply is restricted by the battery.
Abstract: A high precision temperature insensitive current and voltage reference generator is presented. It is specifically developed for temperature compensated oscillator. The circuit, designed using MXIC 0.5um CMOS technology, has an operating voltage that ranges from 2.6V to 5V and generates a voltage of 1.21V and a current of 6.38 ӴA. It exhibits a variation of ±0.3nA for the current reference and a stable output for voltage reference as the temperature is varied from 0°C to 70°C. The power supply rejection ratio obtained without any filtering capacitor at 100Hz and 10MHz is -30dB and -12dB respectively.
Abstract: The purpose of this paper primarily intends to develop GIS interface for estimating sequences of stream-flows at ungauged stations based on known flows at gauged stations. The integrated GIS interface is composed of three major steps. The first, precipitation characteristics using statistical analysis is the procedure for making multiple linear regression equation to get the long term mean daily flow at ungauged stations. The independent variables in regression equation are mean daily flow and drainage area. Traditionally, mean flow data are generated by using Thissen polygon method. However, method for obtaining mean flow data can be selected by user such as Kriging, IDW (Inverse Distance Weighted), Spline methods as well as other traditional methods. At the second, flow duration curve (FDC) is computing at unguaged station by FDCs in gauged stations. Finally, the mean annual daily flow is computed by spatial interpolation algorithm. The third step is to obtain watershed/topographic characteristics. They are the most important factors which govern stream-flows. In summary, the simulated daily flow time series are compared with observed times series. The results using integrated GIS interface are closely similar and are well fitted each other. Also, the relationship between the topographic/watershed characteristics and stream flow time series is highly correlated.
Abstract: Computer based geostatistical methods can offer effective data analysis possibilities for agricultural areas by using
vectorial data and their objective informations. These methods will help to detect the spatial changes on different locations of the large
agricultural lands, which will lead to effective fertilization for optimal yield with reduced environmental pollution. In this study, topsoil (0-20 cm) and subsoil (20-40 cm) samples were taken from a
sugar beet field by 20 x 20 m grids. Plant samples were also collected
from the same plots. Some physical and chemical analyses for these
samples were made by routine methods. According to derived variation coefficients, topsoil organic matter (OM) distribution was more than subsoil OM distribution. The highest C.V. value of
17.79% was found for topsoil OM. The data were analyzed
comparatively according to kriging methods which are also used
widely in geostatistic. Several interpolation methods (Ordinary,Simple and Universal) and semivariogram models (Spherical,
Exponential and Gaussian) were tested in order to choose the suitable
methods. Average standard deviations of values estimated by simple
kriging interpolation method were less than average standard
deviations (topsoil OM ± 0.48, N ± 0.37, subsoil OM ± 0.18) of measured values. The most suitable interpolation method was simple
kriging method and exponantial semivariogram model for topsoil,
whereas the best optimal interpolation method was simple kriging
method and spherical semivariogram model for subsoil. The results
also showed that these computer based geostatistical methods should
be tested and calibrated for different experimental conditions and semivariogram models.
Abstract: Content-Based Image Retrieval (CBIR) has been
one on the most vivid research areas in the field of computer vision
over the last 10 years. Many programs and tools have been
developed to formulate and execute queries based on the visual or
audio content and to help browsing large multimedia repositories.
Still, no general breakthrough has been achieved with respect to
large varied databases with documents of difering sorts and with
varying characteristics. Answers to many questions with respect to
speed, semantic descriptors or objective image interpretations are
still unanswered. In the medical field, images, and especially
digital images, are produced in ever increasing quantities and used
for diagnostics and therapy. In several articles, content based
access to medical images for supporting clinical decision making
has been proposed that would ease the management of clinical data
and scenarios for the integration of content-based access methods
into Picture Archiving and Communication Systems (PACS) have
been created. This paper gives an overview of soft computing
techniques. New research directions are being defined that can
prove to be useful. Still, there are very few systems that seem to be
used in clinical practice. It needs to be stated as well that the goal
is not, in general, to replace text based retrieval methods as they
exist at the moment.
Abstract: Ambiguities in effects of earthquake on various
structures in all earthquake codes would necessitate more study and
research concerning influential factors on dynamic behavior.
Previous studies which were done on different features in different
buildings play a major role in the type of response a structure makes
to lateral vibrations. Diagnosing each of these irregularities can help
structure designers in choosing appropriate setbacks for decreasing
possible damages. Therefore vertical setback is one of the irregularity
factors in the height of the building where can be seen in skyscrapers
and hotels. Previous researches reveal notable changes in the place of
these setbacks showing dynamic response of the structure.
Consequently analyzing 48 models of concrete frames for 3, 6 and 9
stories heights with three different bays in general shape of a surface
decline by height have been constructed in ETABS2000 software,
and then the shape effect of each and every one of these frames in
period scale has been discussed. The result of this study reveals that
not only mass, stiffness and height but also shape of the frame is
influential.