Abstract: People usually have a telephone voice, which means
they adjust their speech to fit particular situations and to blend in with
other interlocutors. The question is: Do we speak differently to
different people? This possibility has been suggested by social
psychologists within Accommodation Theory [1]. Converging toward
the speech of another person can be regarded as a polite speech
strategy while choosing a language not used by the other interlocutor
can be considered as the clearest example of speech divergence [2].
The present study sets out to investigate such processes in the course
of everyday telephone conversations. Using Joos-s [3] model of
formality in spoken English, the researchers try to explore
convergence to or divergence from the addressee. The results
propound the actuality that lexical choice, and subsequently, patterns
of style vary intriguingly in concordance with the person being
addressed.
Abstract: In rotating machinery one of the critical components
that is prone to premature failure is the rolling bearing.
Consequently, early warning of an imminent bearing failure is much
critical to the safety and reliability of any high speed rotating
machines. This study is concerned with the application of Recurrence
Quantification Analysis (RQA) in fault detection of rolling element
bearings in rotating machinery. Based on the results from this study it
is reported that the RQA variable, percent determinism, is sensitive
to the type of fault investigated and therefore can provide useful
information on bearing damage in rolling element bearings.
Abstract: The aim of this study was to establish the feasibility of a minute incremental exercise testing protocol in young asthma children. Twenty-two children with clinically diagnosed mild to moderate asthma volunteered to participate. The maximum incremental exercise test was performed using a cycle ergometer with an electromagnetic braking. A warm-up unloaded for 2 minutes then the workload was started at 40 watts for 2 minutes, and then stepwise increments of 8 watts per 2 minutes were applied. The pedaling frequency was set at 50 rpm. Ventilation and gas exchange were measured with a breath-by-breath automatic metabolic measurement system. Results showed that this test was well tolerated by all asthmatic children. Most of the children reached the VO2 plateau and satisfied the criteria for maximal respiratory exchange ratio of ≥ 1. This Study demonstrated that this testing protocol was suitable for young asthmatic children.
Abstract: This work deals with problems of tool axis inclination angles in ball-end milling. Tool axis inclination angle contributes to improvement of functional surface properties (surface integrity - surface roughness, residual stress, micro hardness, etc.), decreasing cutting forces and improving production. By milling with ball-end milling tool, using standard way of cutting, when work piece and cutting tool contain right angle, we have zero cutting speed on edge. At this point cutting tool only pushes material into the work piece. Here we can observe the following undesirable effects - chip contraction, increasing of cutting temperature, increasing vibrations or creation of built-up edge. These effects have negative results – low quality of surface and decreasing of tool life (in the worse case even it is pinching out). These effects can be eliminated with the tilt of cutting tool or tilt of work piece.
Abstract: This paper introduces the effective speckle reduction of
synthetic aperture radar (SAR) images using inner product spaces in
undecimated wavelet domain. There are two major areas in projection
onto span algorithm where improvement can be made. First is the use
of undecimated wavelet transformation instead of discrete wavelet
transformation. And second area is the use of smoothing filter namely
directional smoothing filter which is an additional step. Proposed
method does not need any noise estimation and thresholding
technique. More over proposed method gives good results on both
single polarimetric and fully polarimetric SAR images.
Abstract: Internal combustion engines rejects 30-40% of the
energy supplied by fuel to the environment through exhaust gas. thus, there is a possibility for further significant improvement of efficiency with the utilization of exhaust gas energy and its conversion to mechanical energy or electrical energy. The Thermo-Electric
Generator (TEG) will be located in the exhaust system and will make use of an energy flow between the warmer exhaust gas and the external environment. Predict to th optimum position of temperature
distribution and the performance of TEG through numerical analysis.
The experimental results obtained show that the power output significantly increases with the temperature difference between cold
and hot sides of a thermoelectric generator.
Abstract: The steady state response of bond graphs representing
passive and active suspension is presented. A bond graph with
preferred derivative causality assignment to get the steady state
is proposed. A general junction structure of this bond graph
is proposed. The proposed methodology to passive and active
suspensions is applied.
Abstract: Crawling movement as a motive mode seen in nature
of some animals such as snakes possesses a specific syntactic and
dynamic analysis. Serpentine robot designed by inspiration from
nature and snake-s crawling motion, is regarded as a crawling robot.
In this paper, a serpentine robot with spiral motion model will be
analyzed. The purpose of this analysis is to calculate the vertical and
tangential forces along snake-s body and to determine the parameters
affecting on these forces. Two types of serpentine robots have been
designed in order to examine the achieved relations explained below.
Abstract: An experimental study of Reinforced Concrete, RC, columns strengthened using a steel jacketing technique was conducted. The jacketing technique consisted of four steel vertical angles installed at the corners of the column joined by horizontal steel straps confining the column externally. The effectiveness of the technique was evaluated by testing the RC column specimens under eccentric monotonic loading until failure occurred. Strain gauges were installed to monitor the strains in the internal reinforcement as well as the external jacketing system. The effectiveness of the jacketing technique was demonstrated, and the parameters affecting the technique were studied.
Abstract: The availability of broadband internet and increased
access to computers has been instrumental in the rise of internet
literacy in Malaysia. This development has led to the adoption of
online shopping by many Malaysians. On another note, the
Government has supported the development and production of local
herbal products. This has resulted in an increase in the production and
diversity of products by SMEs. The purpose of this study is to
evaluate the influence of the Malaysian demographic factors and
selected attitudinal characteristics in relation to the online purchasing
of herbal products. In total, 1054 internet users were interviewed
online and Chi-square analysis was used to determine the relationship
between demographic variables and different aspects of online
shopping for herbal products. The overall results show that the
demographic variables such as age, gender, education level, income
and ethnicity were significant when considering the online shopping
antecedents of trust, quality of herbal products, perceived risks and
perceived benefits.
Abstract: Although the STL (stereo lithography) file format is
widely used as a de facto industry standard in the rapid prototyping
industry due to its simplicity and ability to tessellation of almost all
surfaces, but there are always some defects and shortcoming in their
usage, which many of them are difficult to correct manually. In
processing the complex models, size of the file and its defects grow
extremely, therefore, correcting STL files become difficult. In this
paper through optimizing the exiting algorithms, size of the files and
memory usage of computers to process them will be reduced. In spite
of type and extent of the errors in STL files, the tail-to-head
searching method and analysis of the nearest distance between tails
and heads techniques were used. As a result STL models sliced
rapidly, and fully closed contours produced effectively and errorless.
Abstract: This study presents a systematic analysis of wetted region due to cooling of aluminum plate by water spray impingement with respect to different water flow rates, spray nozzle heights, and subcooling. Unlike jet impingement, the wetting is not commenced upon spray impingement and there is a delay in wetness of hot test surface. After initiation, the wetting (black zone) progresses gradually to cover all test plate and provides efficient cooling in nucleate boiling regime. Generally, spray cooling is found function of spray flow rate, spray-to-surface distance and water subcooling. Wetting delay is decreasing by increasing of spray flow rate until spray impact area is not become bigger that test surface. Otherwise, higher spray flow rate is not practically accelerated start of wetting. Very fast wetting due to spray cooling can be obtained by dense spray (high floe rate) discharged from adjacent nozzle to the test surface. Highly subcooling water spray also triggers earlier wetting of hot aluminum plate.
Abstract: This paper addresses the problem of asymptotic tracking
control of a linear parabolic partial differential equation with indomain
point actuation. As the considered model is a non-standard
partial differential equation, we firstly developed a map that allows
transforming this problem into a standard boundary control problem
to which existing infinite-dimensional system control methods can
be applied. Then, a combination of energy multiplier and differential
flatness methods is used to design an asymptotic tracking controller.
This control scheme consists of stabilizing state-feedback derived
from the energy multiplier method and feed-forward control based
on the flatness property of the system. This approach represents
a systematic procedure to design tracking control laws for a class
of partial differential equations with in-domain point actuation. The
applicability and system performance are assessed by simulation
studies.
Abstract: In industrial scale of Gas to Liquid (GTL) process in
Fischer-Tropsch (FT) synthesis, a part of reactor outlet gases such as
CO2 and CH4 as side reaction products, is usually recycled. In this
study, the influence of CO2 and CH4 on the performance and
selectivity of Co-Ru/Al2O3 catalyst is investigated by injection of
these gases (0-20 vol. % of feed) to the feed stream. The effect of
temperature and feed flow rate, are also inspected. The results show
that low amounts of CO2 in the feed stream, doesn`t change the
catalyst activity significantly but increasing the amount of CO2 (more
than 10 vol. %) cause the CO conversion to decrease and the
selectivity of heavy components to increase. Methane acts as an inert
gas and doesn`t affect the catalyst performance. Increasing feed flow
rate has negative effect on both CO conversion and heavy component
selectivity. By raising the temperature, CO conversion will increase
but there are more volatile components in the product. The effect of
CO2 on the catalyst deactivation is also investigated carefully and a
mechanism is suggested to explain the negative influence of CO2 on
catalyst deactivation.
Abstract: This work aims to explore the factors that have an incidence in reading comprehension process, with different type of texts. In a recent study with 2nd, 3rd and 4th grade children, it was observed that reading comprehension of narrative texts was better than comprehension of expository texts. Nevertheless it seems that not only the type of text but also other textual factors would account for comprehension depending on the cognitive processing demands posed by the text. In order to explore this assumption, three narrative and three expository texts were elaborated with different degree of complexity. A group of 40 fourth grade Spanish-speaking children took part in the study. Children were asked to read the texts and answer orally three literal and three inferential questions for each text. The quantitative and qualitative analysis of children responses showed that children had difficulties in both, narrative and expository texts. The problem was to answer those questions that involved establishing complex relationships among information units that were present in the text or that should be activated from children’s previous knowledge to make an inference. Considering the data analysis, it could be concluded that there is some interaction between the type of text and the cognitive processing load of a specific text.
Abstract: In sport, human resources management gives special
attention to method of applying volunteers, their maintenance, and
participation of volunteers with each other and management
approaches for better operation of events celebrants. The recognition
of volunteers- characteristics and motives is important to notice,
because it makes the basis of their participation and commitment at
sport environment. The motivation and commitment of 281
volunteers were assessed using the organizational commitment scale,
motivation scale and personal characteristics questionnaire.The
descriptive results showed that; 64% of volunteers were women with
age average 21/24 years old. They were physical education student,
single (71/9%), without occupation (53%) and with average of 5
years sport experience. Their most important motivation was career
factor and the most important commitment factor was normative
factor. The results of examining the hypothesized showed that; age,
sport experience and education are effective in the amount of
volunteers- commitment. And the motive factors such as career,
material, purposive and protective factors also have the power to
predict the amount of sports volunteers- commitment value.
Therefore it is recommended to provide possible opportunities for
volunteers and carrying out appropriate instructional courses by
events executive managers.
Abstract: In this research, Forming Limit Diagrams for supertension
sheet metals which are using in automobile industry have
been obtained. The exerted strains to sheet metals have been
measured with four different methods and the errors of each method
have also been represented. These methods have been compared with
together and the most efficient and economic way of extracting of the
exerted strains to sheet metals has been introduced. In this paper total
error and uncertainty of FLD extraction procedures have been
derived. Determination of the measurement uncertainty in extracting
of FLD has a great importance in design and analysis of the sheet
metal forming process.
Abstract: Aquatic and semi aquatic birds as a group are suited to
feed and breed in environments in which water forms a fundamental
part. These birds are biological indicator in aquatic environment,
because these birds belong to the top level of food chain in aquatic
ecosystems. There are 61 species in 14 families of aquatic and semi
aquatic birds in Iran. The birds of the Sattarkhan Lake belong to 16
species in 8 families which include 26.2 percent of total Aquatic and
semi aquatic bird species and 57% of Aquatic and semi aquatic bird's
family of Iran. Study was carried out monthly at Sattarkhan Lake
show the existence of Phalacrocorax carbo, Ardea cinerea, Egretta
alba, Egretta garzetta, Bubulcus ibis, Botaurus stellaris, Sterna
hirundo, Chlidonias leucopterus, Larus minutus, Larus argentatus,
Larus ridibunbus, Alcedo atthis, Ciconia ciconia, Plegadis
falcinellus, Circus aeruginosus, Corvus frugilegus
Abstract: Purpose: To explore the use of Curvelet transform to
extract texture features of pulmonary nodules in CT image and support
vector machine to establish prediction model of small solitary
pulmonary nodules in order to promote the ratio of detection and
diagnosis of early-stage lung cancer. Methods: 2461 benign or
malignant small solitary pulmonary nodules in CT image from 129
patients were collected. Fourteen Curvelet transform textural features
were as parameters to establish support vector machine prediction
model. Results: Compared with other methods, using 252 texture
features as parameters to establish prediction model is more proper.
And the classification consistency, sensitivity and specificity for the
model are 81.5%, 93.8% and 38.0% respectively. Conclusion: Based
on texture features extracted from Curvelet transform, support vector
machine prediction model is sensitive to lung cancer, which can
promote the rate of diagnosis for early-stage lung cancer to some
extent.
Abstract: The hybridization of artificial immune system with
cellular automata (CA-AIS) is a novel method. In this hybrid model,
the cellular automaton within each cell deploys the artificial immune
system algorithm under optimization context in order to increase its
fitness by using its neighbor-s efforts. The hybrid model CA-AIS is
introduced to fix the standard artificial immune system-s weaknesses.
The credibility of the proposed approach is evaluated by simulations
and it shows that the proposed approach achieves better results
compared to standard artificial immune system.