Abstract: Although the STL (stereo lithography) file format is
widely used as a de facto industry standard in the rapid prototyping
industry due to its simplicity and ability to tessellation of almost all
surfaces, but there are always some defects and shortcoming in their
usage, which many of them are difficult to correct manually. In
processing the complex models, size of the file and its defects grow
extremely, therefore, correcting STL files become difficult. In this
paper through optimizing the exiting algorithms, size of the files and
memory usage of computers to process them will be reduced. In spite
of type and extent of the errors in STL files, the tail-to-head
searching method and analysis of the nearest distance between tails
and heads techniques were used. As a result STL models sliced
rapidly, and fully closed contours produced effectively and errorless.
Abstract: In this paper, solution of fuzzy differential equation
under general differentiability is obtained by simulink. The simulink
solution is equivalent or very close to the exact solution of the
problem. Accuracy of the simulink solution to this problem is
qualitatively better. An illustrative numerical example is presented
for the proposed method.
Abstract: In industrial scale of Gas to Liquid (GTL) process in
Fischer-Tropsch (FT) synthesis, a part of reactor outlet gases such as
CO2 and CH4 as side reaction products, is usually recycled. In this
study, the influence of CO2 and CH4 on the performance and
selectivity of Co-Ru/Al2O3 catalyst is investigated by injection of
these gases (0-20 vol. % of feed) to the feed stream. The effect of
temperature and feed flow rate, are also inspected. The results show
that low amounts of CO2 in the feed stream, doesn`t change the
catalyst activity significantly but increasing the amount of CO2 (more
than 10 vol. %) cause the CO conversion to decrease and the
selectivity of heavy components to increase. Methane acts as an inert
gas and doesn`t affect the catalyst performance. Increasing feed flow
rate has negative effect on both CO conversion and heavy component
selectivity. By raising the temperature, CO conversion will increase
but there are more volatile components in the product. The effect of
CO2 on the catalyst deactivation is also investigated carefully and a
mechanism is suggested to explain the negative influence of CO2 on
catalyst deactivation.
Abstract: Using a set of confidence intervals, we develop a
common approach, to construct a fuzzy set as an estimator for
unknown parameters in statistical models. We investigate a method
to derive the explicit and unique membership function of such fuzzy
estimators. The proposed method has been used to derive the fuzzy
estimators of the parameters of a Normal distribution and some
functions of parameters of two Normal distributions, as well as the
parameters of the Exponential and Poisson distributions.
Abstract: In sport, human resources management gives special
attention to method of applying volunteers, their maintenance, and
participation of volunteers with each other and management
approaches for better operation of events celebrants. The recognition
of volunteers- characteristics and motives is important to notice,
because it makes the basis of their participation and commitment at
sport environment. The motivation and commitment of 281
volunteers were assessed using the organizational commitment scale,
motivation scale and personal characteristics questionnaire.The
descriptive results showed that; 64% of volunteers were women with
age average 21/24 years old. They were physical education student,
single (71/9%), without occupation (53%) and with average of 5
years sport experience. Their most important motivation was career
factor and the most important commitment factor was normative
factor. The results of examining the hypothesized showed that; age,
sport experience and education are effective in the amount of
volunteers- commitment. And the motive factors such as career,
material, purposive and protective factors also have the power to
predict the amount of sports volunteers- commitment value.
Therefore it is recommended to provide possible opportunities for
volunteers and carrying out appropriate instructional courses by
events executive managers.
Abstract: In this research, Forming Limit Diagrams for supertension
sheet metals which are using in automobile industry have
been obtained. The exerted strains to sheet metals have been
measured with four different methods and the errors of each method
have also been represented. These methods have been compared with
together and the most efficient and economic way of extracting of the
exerted strains to sheet metals has been introduced. In this paper total
error and uncertainty of FLD extraction procedures have been
derived. Determination of the measurement uncertainty in extracting
of FLD has a great importance in design and analysis of the sheet
metal forming process.
Abstract: The efficient knowledge management system (KMS)
is one of the important strategies to help firms to achieve sustainable
competitive advantages, but little research has been conducted to
understand what contributes to the KMS success. This study thus set
to investigate the determinants of KMS success in the context of Thai
banking industry. A questionnaire survey was conducted in four
major Thai Banks to test the proposed KMS Success model.
The result of this study shows that KMS use and user satisfaction
relate significantly to the success of KMS, and knowledge quality,
service quality and trust lead to system use, and knowledge quality,
system quality and trust lead to user satisfaction. However, this
research focuses only on system and user-related factors. Future
research thus can extend to study factors such as management support
and organization readiness.
Abstract: The growing outsourcing of logistics services
resulting from the ongoing current in firms of costs
reduction/increased efficiency means that it is becoming more and
more important for the companies doing the outsourcing to carry out
a proper evaluation.
The multiple definitions and measures of logistics service
performance found in research on the topic create a certain degree of
confusion and do not clear the way towards the proper measurement
of their performance. Do a model and a specific set of indicators exist
that can be considered appropriate for measuring the performance of
logistics services outsourcing in industrial environments? Are said
indicators in keeping with the objectives pursued by outsourcing? We
aim to answer these and other research questions in the study we have
initiated in the field within the framework of the international High
Performance Manufacturing (HPM) project of which this paper
forms part.
As the first stage of this research, this paper reviews articles
dealing with the topic published in the last 15 years with the aim of
detecting the models most used to make this measurement and
determining which performance indicators are proposed as part of
said models and which are most used. The first steps are also taken in
determining whether these indicators, financial and operational, cover
the aims that are being pursued when outsourcing logistics services.
The findings show there is a wide variety of both models and
indicators used. This would seem to testify to the need to continue
with our research in order to try to propose a model and a set of
indicators for measuring the performance of logistics services
outsourcing in industrial environments.
Abstract: The effect of different combinations of response
feedback on the performance of active control system on nonlinear
frames has been studied in this paper. To this end different feedback
combinations including displacement, velocity, acceleration and full
response feedback have been utilized in controlling the response of
an eight story bilinear hysteretic frame which has been subjected to a
white noise excitation and controlled by eight actuators which could
fully control the frame. For active control of nonlinear frame
Newmark nonlinear instantaneous optimal control algorithm has been
used which a diagonal matrix has been selected for weighting
matrices in performance index. For optimal design of active control
system while the objective has been to reduce the maximum drift to
below the yielding level, Distributed Genetic Algorithm (DGA) has
been used to determine the proper set of weighting matrices. The
criteria to assess the effect of each combination of response feedback
have been the minimum required control force to reduce the
maximum drift to below the yielding drift. The results of numerical
simulation show that the performance of active control system is
dependent on the type of response feedback where the velocity
feedback is more effective in designing optimal control system in
comparison with displacement and acceleration feedback. Also using
full feedback of response in controller design leads to minimum
control force amongst other combinations. Also the distributed
genetic algorithm shows acceptable convergence speed in solving the
optimization problem of designing active control systems.
Abstract: Scale defects are common surface defects in hot steel rolling. The modelling of such defects is problematic and their causes are not straightforward. In this study, we investigated genetic algorithms in search for a mathematical solution to scale formation. For this research, a high-dimensional data set from hot steel rolling process was gathered. The synchronisation of the variables as well as the allocation of the measurements made on the steel strip were solved before the modelling phase.
Abstract: The indoor airflow with a mixed natural/forced convection
was numerically calculated using the laminar and turbulent
approach. The Boussinesq approximation was considered for a simplification
of the mathematical model and calculations. The results
obtained, such as mean velocity fields, were successfully compared
with experimental PIV flow visualizations. The effect of the distance
between the cooled wall and the heat exchanger on the temperature
and velocity distributions was calculated. In a room with a simple
shape, the computational code OpenFOAM demonstrated an ability to
numerically predict flow patterns. Furthermore, numerical techniques,
boundary type conditions and the computational grid quality were
examined. Calculations using the turbulence model k-omega had a
significant effect on the results influencing temperature and velocity
distributions.
Abstract: This paper presents a simple approach for load
flow analysis of a radial distribution network. The proposed
approach utilizes forward and backward sweep algorithm
based on Kirchoff-s current law (KCL) and Kirchoff-s voltage
law (KVL) for evaluating the node voltages iteratively. In this
approach, computation of branch current depends only on the
current injected at the neighbouring node and the current in
the adjacent branch. This approach starts from the end nodes
of sub lateral line, lateral line and main line and moves
towards the root node during branch current computation. The
node voltage evaluation begins from the root node and moves
towards the nodes located at the far end of the main, lateral
and sub lateral lines. The proposed approach has been tested
using four radial distribution systems of different size and
configuration and found to be computationally efficient.
Abstract: It has been shown that in most accidents the driver is responsible due to being distracted or misjudging the situation. In order to solve such problems research has been dedicated to developing driver assistance systems that are able to monitor the traffic situation around the vehicle. This paper presents methods for recognizing several circumstances on a road. The methods use both the in-vehicle warning systems and the roadside infrastructure. Preliminary evaluation results for fog and ice-on-road detection are presented. The ice detection results are based on data recorded in a test track dedicated to tyre friction testing. The achieved results anticipate that ice detection could work at a performance of 70% detection with the right setup, which is a good foundation for implementation. However, the full benefit of the presented cooperative system is achieved by fusing the outputs of multiple data sources, which is the key point of discussion behind this publication.
Abstract: The birdhouses and dovecotes, which are the indicator
of naturalness and human-animal relationship, are one of the
traditional cultural values of Turkey. With their structures compatible
with nature and respectful to humans the bird houses and dovecotes,
which have an important position in local urbanization models as a
representative of the civil architecture with their unique form and
function are important subjects that should be evaluated in a wide
frame comprising from architecture to urbanism, from ecologic
agriculture to globalization. The traditional bird houses and
dovecotes are disregarded due to the insensitivity affecting the city
life and the change in the public sense of art. In this study, the
characteristic properties of traditional dovecotes and birdhouses,
started in 13th century and ended in 19th century in Anatolia, are
tried to be defined for the sustainability of the tradition and for giving
a new direction to the designers.
Abstract: Company mergers and acquisitions reached their peak
in the twenty-first century. Mergers and acquisitions have become one
of the competitive strategies for external growth. In general, it is
believed that mergers and acquisitions can create synergies. However,
they require complete information technology system and service
integration, especially in the banking industry. Much of the research
has focused on performance evaluation, shareholder equity allocation,
or even the increase of company market value after the merger and
acquisition, whereas few scholars have focused on information system
integration post merger and acquisition. This study indicates the role
of information systems after a merger and acquisition, explaining the
benefits of information system integration using a merger and
acquisition case in the banking industry as an example. In addition, we
discuss factors that affect the performance of information system
integration, and utilize system dynamics to interpret the relationship
among factors that affect information system integration performance
in the banking industry after a merger and acquisition.
Abstract: carrot is one of the important root vegetable crops,
and it is highly nutritious as it contains appreciable amount of
vitamins, minerals and β-carotene. The major objective of current
research was to evaluate the chemical composition of carrot variety
'Nante' hybrids in general and to select the best samples for fresh-cut
salad production. The research was accomplished on fresh in Latvia
cultivated carrots harvested in Zemgale region in the first part of
October, 2011 and immediately used for experiments. Late-bearing
variety 'Nante' hybrid carrots were used for analysis:
'Nante/Berlikum', 'Nante/Maestro', 'Nante/Forto', 'Nante/Bolero'
and 'Nante/Champion'. The quality parameters as moisture, soluble
solid, firmness, b-carotene, carotenoid, color, polyphenols, total
phenolic compounds and total antioxidant capacity were analyzed
using standard methods. For fresh-cut salad production as more
applicable could be recommended hybrids 'Nante/Forto' and
'Nante/Berlikum' - mainly because it-s higher nutritive value, as
higher total phenolic compounds, polyphenols and pronounced
antioxidant capacity.
Abstract: A major challenge in biomaterials research is the
regulation of protein adsorption which is a key factor for controlling
the subsequent cell adhesion at implant surfaces. The aim of the
present study was to control the adsorption of fibronectin (FN) and
the attachment of MG-63 osteoblasts with an electronic
nanostructure. Shallow doping line lattices with a period of 260 nm
were produced for this purpose by implantation of phosphorous in
silicon wafers. Protein coverage was determined after incubating the
substrate with FN by means of an immunostaining procedure and the
measurement of the fluorescence intensity with a TECAN analyzer.
We observed an increased amount of adsorbed FN on the
nanostructure compared to control substrates. MG-63 osteoblasts
were cultivated for 24h on FN-incubated substrates and their
morphology was assessed by SEM. Preferred orientation and
elongation of the cells in direction of the doping lattice lines was
observed on FN-coated nanostructures.
Abstract: An effective approach for unbalanced three-phase
distribution power flow solutions is proposed in this paper. The
special topological characteristics of distribution networks have been
fully utilized to make the direct solution possible. Two matrices–the
bus-injection to branch-current matrix and the branch-current to busvoltage
matrix– and a simple matrix multiplication are used to
obtain power flow solutions. Due to the distinctive solution
techniques of the proposed method, the time-consuming LU
decomposition and forward/backward substitution of the Jacobian
matrix or admittance matrix required in the traditional power flow
methods are no longer necessary. Therefore, the proposed method is
robust and time-efficient. Test results demonstrate the validity of the
proposed method. The proposed method shows great potential to be
used in distribution automation applications.
Abstract: Frequently a group of people jointly decide and authorize
a specific person as a representative in some business/poitical
occasions, e.g., the board of a company authorizes the chief executive
officer to close a multi-billion acquisition deal. In this paper, an
integrated proxy multi-signature scheme that allows anonymously
vetoable delegation is proposed. This protocol integrates mechanisms
of private veto, distributed proxy key generation, secure transmission
of proxy key, and existentially unforgeable proxy multi-signature
scheme. First, a provably secure Guillou-Quisquater proxy signature
scheme is presented, then the “zero-sharing" protocol is extended
over a composite modulus multiplicative group, and finally the above
two are combined to realize the GQ proxy multi-signature with
anonymously vetoable delegation. As a proxy signature scheme, this
protocol protects both the original signers and the proxy signer.
The modular design allows simplified implementation with less
communication overheads and better computation performance than
a general secure multi-party protocol.
Abstract: A feature weighting and selection method is proposed
which uses the structure of a weightless neuron and exploits the
principles that govern the operation of Genetic Algorithms and
Evolution. Features are coded onto chromosomes in a novel way
which allows weighting information regarding the features to be
directly inferred from the gene values. The proposed method is
significant in that it addresses several problems concerned with
algorithms for feature selection and weighting as well as providing
significant advantages such as speed, simplicity and suitability for
real-time systems.