Abstract: This paper presents a research conducted to investigate the effect of mixing process on polypropylene (PP) modified bitumen mixed with well graded aggregate to form modified bituminous concrete mix. Two mode of mixing, namely dry and wet with different concentration of polymer polypropylene was used with 80/100 pen bitumen, to evaluate the bituminous concrete mix properties. Three percentages of polymer varying from 1-3% by the weight of bitumen was used in this study. Three mixes namely control mix, wet mix and dry mix were prepared. Optimum binder content was calculated considering Marshall Stability, flow, air voids and Marshall Quotient at different bitumen content varying from 4% - 6.5% for control, dry and wet mix. Engineering properties thus obtained at the calculated optimum bitumen content revealed that wet mixing process is advantageous in comparison to dry mixing as it increases the stiffness of the mixture with the increase in polymer content in bitumen. Stiffness value for wet mix increases with the increase in polymer content which is beneficial in terms of rutting. 1% PP dry mix also shows enhanced stiffness, with the air void content limited to 4%.The flow behaviour of dry mix doesn't indicate any major difference with the increase in polymer content revealing that polymer acting as an aggregate only without affecting the viscosity of the binder in the mix. Polypropylene (PP) when interacted with 80 pen base bitumen enhances its performance characteristics which were brought about by altered rheological properties of the modified bitumen. The decrease in flow with the increase in binder content reflects the increase in viscosity of binder which induces the plastic flow in the mix. Workability index indicates that wet mix were easy to compact up to desired void ratio in comparison to dry mix samples.
Abstract: The advancement in wireless technology with the wide
use of mobile devices have drawn the attention of the research and
technological communities towards wireless environments, such as
Wireless Local Area Networks (WLANs), Wireless Wide Area
Networks (WWANs), and mobile systems and ad-hoc networks.
Unfortunately, wired and wireless networks are expressively different
in terms of link reliability, bandwidth, and time of propagation delay
and by adapting new solutions for these enhanced
telecommunications, superior quality, efficiency, and opportunities
will be provided where wireless communications were otherwise
unfeasible. Some researchers define 4G as a significant improvement
of 3G, where current cellular network’s issues will be solved and data
transfer will play a more significant role. For others, 4G unifies
cellular and wireless local area networks, and introduces new routing
techniques, efficient solutions for sharing dedicated frequency bands,
and an increased mobility and bandwidth capacity. This paper
discusses the possible solutions and enhancements probabilities that
proposed to improve the performance of Transmission Control
Protocol (TCP) over different wireless networks and also the paper
investigated each approach in term of advantages and disadvantages.
Abstract: This paper aims to present a survey of object
recognition/classification methods based on image moments. We
review various types of moments (geometric moments, complex
moments) and moment-based invariants with respect to various
image degradations and distortions (rotation, scaling, affine
transform, image blurring, etc.) which can be used as shape
descriptors for classification. We explain a general theory how to
construct these invariants and show also a few of them in explicit
forms. We review efficient numerical algorithms that can be used
for moment computation and demonstrate practical examples of
using moment invariants in real applications.
Abstract: This paper proposes an efficient method to classify
inverse synthetic aperture (ISAR) images. Because ISAR images can
be translated and rotated in the 2-dimensional image place, invariance
to the two factors is indispensable for successful classification. The
proposed method achieves invariance to translation and rotation of
ISAR images using a combination of two-dimensional Fourier
transform, polar mapping and correlation-based alignment of the
image. Classification is conducted using a simple matching score
classifier. In simulations using the real ISAR images of five scaled
models measured in a compact range, the proposed method yields
classification ratios higher than 97 %.
Abstract: The practice of burying the solid waste under the ground is one of the waste disposal methods and dumping is known as an ultimate method in the fastest-growing cities like Rasht city in Iran. Some municipalities select the solid waste landfills without feasibility studies, programming, design and management plans. Therefore, several social and environmental impacts are created by these sites. In this study, the suitability of solid waste landfill in Rasht city, capital of Gilan Province is reviewed using Regional Screening Method (RSM), Geographic Information System (GIS) and Analytical Hierarchy Process (AHP). The results indicated that according to the suitability maps, the value of study site is midsuitable to suitable based on RSM and mid-suitable based on AHP.
Abstract: Dilated cardiomyopathy (DCM) is a severe
cardiovascular disorder characterized by progressive systolic
dysfunction due to cardiac chamber dilatation and inefficient
myocardial contractility often leading to chronic heart failure.
Recently, a genome-wide association studies (GWASs) on DCM
indicate that the ZBTB17 gene rs10927875 single nucleotide
polymorphism is associated with DCM. The aim of the study was to
identify the distribution of ZBTB17 gene rs10927875 polymorphism
in 50 Slovak patients with DCM and 80 healthy control subjects
using the Custom Taqman®SNP Genotyping assays. Risk factors
detected at baseline in each group included age, sex, body mass
index, smoking status, diabetes and blood pressure. The mean age of
patients with DCM was 52.9±6.3 years; the mean age of individuals
in control group was 50.3±8.9 years. The distribution of investigated
genotypes of rs10927875 polymorphism within ZBTB17 gene in the
cohort of Slovak patients with DCM was as follows: CC (38.8%), CT
(55.1%), TT (6.1%), in controls: CC (43.8%), CT (51.2%), TT
(5.0%). The risk allele T was more common among the patients with
dilated cardiomyopathy than in normal controls (33.7% versus
30.6%). The differences in genotype or allele frequencies of ZBTB17
gene rs10927875 polymorphism were not statistically significant
(p=0.6908; p=0.6098). The results of this study suggest that ZBTB17
gene rs10927875 polymorphism may be a risk factor for
susceptibility to DCM in Slovak patients with DCM. Studies of
numerous files and additional functional investigations are needed to
fully understand the roles of genetic associations.
Abstract: The RK1GL2X3 method is a numerical method for solving initial value problems in ordinary differential equations, and is based on the RK1GL2 method which, in turn, is a particular case of the general RKrGLm method. The RK1GL2X3 method is a fourth-order method, even though its underlying Runge-Kutta method RK1 is the first-order Euler method, and hence, RK1GL2X3 is considerably more efficient than RK1. This enhancement is achieved through an implementation involving triple-nested two-point Gauss- Legendre quadrature.
Abstract: Non-uniform current distribution in polymer
electrolyte membrane fuel cells results in local over-heating,
accelerated ageing, and lower power output than expected. This
issue is very critical when fuel cell experiences water flooding. In
this work, the performance of a PEM fuel cell is investigated under
cathode flooding conditions. Two-dimensional partially flooded
GDL models based on the conservation laws and electrochemical
relations are proposed to study local current density distributions
along flow fields over a wide range of cell operating conditions.
The model results show a direct association between cathode inlet
humidity increases and that of average current density but the
system becomes more sensitive to flooding. The anode inlet
relative humidity shows a similar effect. Operating the cell at
higher temperatures would lead to higher average current densities
and the chance of system being flooded is reduced. In addition,
higher cathode stoichiometries prevent system flooding but the
average current density remains almost constant. The higher anode
stoichiometry leads to higher average current density and higher
sensitivity to cathode flooding.
Abstract: Many water supply systems in Australia are currently
undergoing significant reconfiguration due to reductions in long term
average rainfall and resulting low inflows to water supply reservoirs
since the second half of the 20th century. When water supply systems
undergo change, it is necessary to develop new operating rules,
which should consider climate, because the climate change is likely
to further reduce inflows. In addition, water resource systems are
increasingly intended to be operated to meet complex and multiple
objectives representing social, economic, environmental and
sustainability criteria. This is further complicated by conflicting
preferences on these objectives from diverse stakeholders. This paper
describes a methodology to develop optimum operating rules for
complex multi-reservoir systems undergoing significant change,
considering all of the above issues. The methodology is demonstrated
using the Grampians water supply system in northwest Victoria,
Australia. Initial work conducted on the project is also presented in
this paper.
Abstract: Rainfall records of rainfall station including the
rainfall potential per hour and rainfall mass of five heavy storms are
explored, respectively from 2001 to 2010. The rationalization formula
is to investigate the capability of flood peak duration of flood
detention pond in different rainfall conditions. The stable flood
detention model is also proposed by using system dynamic control
theory to get the message of flood detention pond in this research.
When rainfall frequency of one hour rainfall duration is more than
100-year frequency which exceeds the flood detention standard of
20-year frequency for the flood detention pond, the flood peak
duration of flood detention pond is 1.7 hours at most even though the
flood detention pond with maximum drainage potential about 15.0
m3/s of pumping system is constructed. If the rainfall peak current is
more than maximum drainage potential, the flood peak duration of
flood detention pond is about 1.9 hours at most. The flood detention
pond is the key factor of stable drainage control and flood prevention.
The critical factors of flood disaster is not only rainfall mass, but also
rainfall frequency of heavy storm in different rainfall duration and
flood detention frequency of flood detention system.
Abstract: Web services are pieces of software that can be invoked via a standardized protocol. They can be combined via formalized taskflow languages. The Open Knowledge system is a fully distributed system using P2P technology, that allows users to publish the setaskflows, and programmers to register their web services or publish implementations of them, for the roles described in these workflows.Besides this, the system offers the functionality to select a peer that could coordinate such an interaction model and inform web services when it is their 'turn'. In this paper we describe the architecture and implementation of the Open Knowledge Kernel which provides the core functionality of the Open Knowledge system.
Abstract: Nowadays data backup format doesn-t cease to appear raising so the anxiety on their accessibility and their perpetuity. XML is one of the most promising formats to guarantee the integrity of data. This article suggests while showing one thing man can do with XML. Indeed XML will help to create a data backup model. The main task will consist in defining an application in JAVA able to convert information of a database in XML format and restore them later.
Abstract: Heart sound is an acoustic signal and many techniques
used nowadays for human recognition tasks borrow speech recognition
techniques. One popular choice for feature extraction of accoustic
signals is the Mel Frequency Cepstral Coefficients (MFCC) which
maps the signal onto a non-linear Mel-Scale that mimics the human
hearing. However the Mel-Scale is almost linear in the frequency
region of heart sounds and thus should produce similar results with
the standard cepstral coefficients (CC). In this paper, MFCC is
investigated to see if it produces superior results for PCG based
human identification system compared to CC. Results show that the
MFCC system is still superior to CC despite linear filter-banks in
the lower frequency range, giving up to 95% correct recognition rate
for MFCC and 90% for CC. Further experiments show that the high
recognition rate is due to the implementation of filter-banks and not
from Mel-Scaling.
Abstract: Among neural models the Support Vector Machine
(SVM) solutions are attracting increasing attention, mostly because
they eliminate certain crucial questions involved by neural network
construction. The main drawback of standard SVM is its high
computational complexity, therefore recently a new technique, the
Least Squares SVM (LS–SVM) has been introduced. In this paper we
present an extended view of the Least Squares Support Vector
Regression (LS–SVR), which enables us to develop new
formulations and algorithms to this regression technique. Based on
manipulating the linear equation set -which embodies all information
about the regression in the learning process- some new methods are
introduced to simplify the formulations, speed up the calculations
and/or provide better results.
Abstract: Two cultivars ('Rutuliai', 'Saint Perrie') and five
hybrids ('Tolstoi', 'Brooklyn', 'Tocayo', 'Benito', 'Tourist') of edible
tomato (Lycopersicon esculentum Mill.) were investigated at the
LRCAF Institute of Horticulture. The following fruit quality
parameters were evaluated: the amount of lycopene, β-carotene,
ascorbic acid, total and inverted sugar, sucrose, dry matter soluble
solids in fresh tomato matter, also were determined fruit skin and
flesh firmness, color indexes (CIE L*a*b*) and calculated hue angle
(h°) with chroma (C).
Abstract: At present time, competition, unpredictable fluctuations have made communication engineering education in the global sphere really difficult. Confront with new situation in the engineering education sector. Communication engineering education has to be reformed and ready to use more advanced technologies. We realized that one of the general problems of student`s education is that after graduating from their universities, they are not prepared to face the real life challenges and full skilled to work in industry. They are prepared only to think like engineers and professionals but they also need to possess some others non-technical skills. In today-s environment, technical competence alone is not sufficient for career success. Employers want employees (graduate engineers) who have good oral and written communication (soft) skills. It does require for team work, business awareness, organization, management skills, responsibility, initiative, problem solving and IT competency. This proposed curriculum brings interactive, creative, interesting, effective learning methods, which includes online education, virtual labs, practical work, problem-based learning (PBL), and lectures given by industry experts. Giving short assignments, presentations, reports, research papers and projects students can significantly improve their non-technical skills. Also, we noticed the importance of using ICT technologies in engineering education which used by students and teachers, and included that into proposed teaching and learning methods. We added collaborative learning between students through team work which builds theirs skills besides course materials. The prospective on this research that we intent to update communication engineering curriculum in order to get fully constructed engineer students to ready for real industry work.
Abstract: Recently, Northeast Asia has become one of the three
largest trade areas, covering approximately 30% of the total trade
volume of the world. However, the distribution facilities are saturated
due to the increase in the transportation volume within the area and
with the European countries. In order to accommodate the increase of
the transportation volume, the transportation networking with the
major countries in Northeast Asia and Europe is absolutely necessary.
The Eurasian Logistics Network will develop into an international
passenger transportation network covering the Northeast Asian region
and an international freight transportation network connecting across
Eurasia Continent. This paper surveys the changes and trend of the
distribution network in the Eurasian Region according to the political,
economic and environmental changes of the region, analyses the
distribution network according to the changes in the transportation
policies of the related countries, and provides the direction of the
development of composite transportation on the basis of the present
conditions of transportation means. The transportation means optimal
for the efficiency of transportation system are suggested to be train
ferries, sea & rail or sea & rail & sea. It is suggested to develop
diversified composite transportation means and routes within the
boundary of international cooperation system.
Abstract: This paper proposes the analysis and design of robust
fuzzy control to Stochastic Parametrics Uncertaint Linear systems.
This system type to be controlled is partitioned into several linear
sub-models, in terms of transfer function, forming a convex polytope,
similar to LPV (Linear Parameters Varying) system. Once defined the
linear sub-models of the plant, these are organized into fuzzy Takagi-
Sugeno (TS) structure. From the Parallel Distributed Compensation
(PDC) strategy, a mathematical formulation is defined in the frequency
domain, based on the gain and phase margins specifications,
to obtain robust PI sub-controllers in accordance to the Takagi-
Sugeno fuzzy model of the plant. The main results of the paper are
based on the robust stability conditions with the proposal of one
Axiom and two Theorems.
Abstract: Renewable energy resources are inexhaustible, clean as compared with conventional resources. Also, it is used to supply regions with no grid, no telephone lines, and often with difficult accessibility by common transport. Satellite earth stations which located in remote areas are the most important application of renewable energy. Neural control is a branch of the general field of intelligent control, which is based on the concept of artificial intelligence. This paper presents the mathematical modeling of satellite earth station power system which is required for simulating the system.Aswan is selected to be the site under consideration because it is a rich region with solar energy. The complete power system is simulated using MATLAB–SIMULINK.An artificial neural network (ANN) based model has been developed for the optimum operation of earth station power system. An ANN is trained using a back propagation with Levenberg–Marquardt algorithm. The best validation performance is obtained for minimum mean square error. The regression between the network output and the corresponding target is equal to 96% which means a high accuracy. Neural network controller architecture gives satisfactory results with small number of neurons, hence better in terms of memory and time are required for NNC implementation. The results indicate that the proposed control unit using ANN can be successfully used for controlling the satellite earth station power system.
Abstract: Proprietary sensor network systems are typically expensive, rigid and difficult to incorporate technologies from other vendors. When using competing and incompatible technologies, a non-proprietary system is complex to create because it requires significant technical expertise and effort, which can be more expensive than a proprietary product. This paper presents the Sensor Abstraction Layer (SAL) that provides middleware architectures with a consistent and uniform view of heterogeneous sensor networks, regardless of the technologies involved. SAL abstracts and hides the hardware disparities and specificities related to accessing, controlling, probing and piloting heterogeneous sensors. SAL is a single software library containing a stable hardware-independent interface with consistent access and control functions to remotely manage the network. The end-user has near-real-time access to the collected data via the network, which results in a cost-effective, flexible and simplified system suitable for novice users. SAL has been used for successfully implementing several low-cost sensor network systems.