Abstract: In this paper, in addition to introducing good urban planning and its effects on globalization, some new methodologies in urban management and another urban aspects has been presented. Some new concerns in increasing of urban population , metropolitans and its relations on big problems has been focused in this paper. It is very important matter that future urban planning with based on globalization will be with full of basically changes in its management and perspectives.
Abstract: In the present work, we propose a new projection method for solving the matrix equation AXB = F. For implementing our new method, generalized forms of block Krylov subspace and global Arnoldi process are presented. The new method can be considered as an extended form of the well-known global generalized minimum residual (Gl-GMRES) method for solving multiple linear systems and it will be called as the extended Gl-GMRES (EGl- GMRES). Some new theoretical results have been established for proposed method by employing Schur complement. Finally, some numerical results are given to illustrate the efficiency of our new method.
Abstract: Malaysian corporations going global increased
many folds. The shift from domestic to international operations
requires increased expatriation to achieve global business goals.
Therefore, this study aims to identify the determinants for success
in expatriation of Malaysian international corporations. There are
certain attributes necessary for a global employee to succeed in
international assignment. Self-administered questionnaires were
sent to 327 respondents with a response rate of 35.2 percent. The
results indicated that most Malaysian manufacturers are involved
in expatriation. For a global employee to succeed in an
international assignment, the ability to work in international teams
was identified and ranked as the most important factor in
determining the effectiveness of expatriation followed by language
proficiency, adaptability to the international assignment and
expatriate sensitivity to cultural elements. The results support
previous research with regard to the importance of an effective
expatriation selection process in order for a company-s
international expansion strategy to succeed.
Abstract: In this paper usefulness of quasi-Newton iteration
procedure in parameters estimation of the conditional variance
equation within BHHH algorithm is presented. Analytical solution of
maximization of the likelihood function using first and second
derivatives is too complex when the variance is time-varying. The
advantage of BHHH algorithm in comparison to the other
optimization algorithms is that requires no third derivatives with
assured convergence. To simplify optimization procedure BHHH
algorithm uses the approximation of the matrix of second derivatives
according to information identity. However, parameters estimation in
a/symmetric GARCH(1,1) model assuming normal distribution of
returns is not that simple, i.e. it is difficult to solve it analytically.
Maximum of the likelihood function can be founded by iteration
procedure until no further increase can be found. Because the
solutions of the numerical optimization are very sensitive to the
initial values, GARCH(1,1) model starting parameters are defined.
The number of iterations can be reduced using starting values close
to the global maximum. Optimization procedure will be illustrated in
framework of modeling volatility on daily basis of the most liquid
stocks on Croatian capital market: Podravka stocks (food industry),
Petrokemija stocks (fertilizer industry) and Ericsson Nikola Tesla
stocks (information-s-communications industry).
Abstract: Since the 1990s the American furniture industry faces a transition period. Manufacturers, one of its most important actors made its entrance into the retail industry. This shift has had deep consequences not only for the American furniture industry as a whole, but also for other international furniture industries, especially the Chinese. The present work aims to analyze this actor based on the distinction provided by the Global Commodity Chain Theory. It stresses its characteristics, structure, operational way and importance for both the U.S. and the Chinese furniture industries.
Abstract: The changing economic climate has made global
manufacturing a growing reality over the last decade, forcing
companies from east and west and all over the world to
collaborate beyond geographic boundaries in the design,
manufacture and assemble of products. The ISO10303 and
ISO14649 Standards (STEP and STEP-NC) have been
developed to introduce interoperability into manufacturing
enterprises so as to meet the challenge of responding to
production on demand. This paper describes and illustrates a
STEP compliant CAD/CAPP/CAM System for the manufacture
of rotational parts on CNC turning centers. The information
models to support the proposed system together with the data
models defined in the ISO14649 standard used to create the NC
programs are also described. A structured view of a STEP
compliant CAD/CAPP/CAM system framework supporting the
next generation of intelligent CNC controllers for turn/mill
component manufacture is provided. Finally a proposed
computational environment for a STEP-NC compliant system
for turning operations (SCSTO) is described. SCSTO is the
experimental part of the research supported by the specification
of information models and constructed using a structured
methodology and object-oriented methods. SCSTO was
developed to generate a Part 21 file based on machining
features to support the interactive generation of process plans
utilizing feature extraction. A case study component has been
developed to prove the concept for using the milling and turning
parts of ISO14649 to provide a turn-mill CAD/CAPP/CAM
environment.
Abstract: Due to the fact that in the new century customers tend
to express globally increasing demands, networks of interconnected
businesses have been established in societies and the management of
such networks seems to be a major key through gaining competitive
advantages. Supply chain management encompasses such managerial
activities. Within a supply chain, a critical role is played by quality.
QFD is a widely-utilized tool which serves the purpose of not only
bringing quality to the ultimate provision of products or service
packages required by the end customer or the retailer, but it can also
initiate us into a satisfactory relationship with our initial customer;
that is the wholesaler. However, the wholesalers- cooperation is
considerably based on the capabilities that are heavily dependent on
their locations and existing circumstances. Therefore, it is undeniable
that for all companies each wholesaler possesses a specific
importance ratio which can heavily influence the figures calculated in
the House of Quality in QFD. Moreover, due to the competitiveness
of the marketplace today, it-s been widely recognized that
consumers- expression of demands has been highly volatile in
periods of production. Apparently, such instability and proneness to
change has been very tangibly noticed and taking it into account
during the analysis of HOQ is widely influential and doubtlessly
required. For a more reliable outcome in such matters, this article
demonstrates the application viability of Analytic Network Process
for considering the wholesalers- reputation and simultaneously
introduces a mortality coefficient for the reliability and stability of
the consumers- expressed demands in course of time. Following to
this, the paper provides further elaboration on the relevant
contributory factors and approaches through the calculation of such
coefficients. In the end, the article concludes that an empirical
application is needed to achieve broader validity.
Abstract: The Canadian aerospace industry faces many
challenges. One of them is the difficulty in estimating costs. In
particular, the design effort required in a project impacts resource
requirements and lead-time, and consequently the final cost. This
paper presents the findings of a case study conducted for recognized
global leader in the design and manufacturing of aircraft engines. The
study models parametric cost estimation relationships to estimate the
design effort of integrated blade-rotor low-pressure compressor fans.
Several effort drivers are selected to model the relationship.
Comparative analyses of three types of models are conducted. The
model with the best accuracy and significance in design estimation is
retained.
Abstract: The area of Project Risk Management (PRM) has
been extensively researched, and the utilization of various tools and
techniques for managing risk in several industries has been
sufficiently reported. Formal and systematic PRM practices have
been made available for the construction industry. Based on such
body of knowledge, this paper tries to find out the global picture of
PRM practices and approaches with the help of a survey to look into
the usage of PRM techniques and diffusion of software tools, their
level of maturity, and their usefulness in the construction sector.
Results show that, despite existing techniques and tools, their usage is
limited: software tools are used only by a minority of respondents
and their cost is one of the largest hurdles in adoption. Finally, the
paper provides some important guidelines for future research
regarding quantitative risk analysis techniques and suggestions for
PRM software tools development and improvement.
Abstract: Existing proceeding-models for the development of mechatronic systems provide a largely parallel action in the detailed development. This parallel approach is to take place also largely independent of one another in the various disciplines involved. An approach for a new proceeding-model provides a further development of existing models to use for the development of Adaptronic Systems. This approach is based on an intermediate integration and an abstract modeling of the adaptronic system. Based on this system-model a simulation of the global system behavior, due to external and internal factors or Forces is developed. For the intermediate integration a special data management system is used. According to the presented approach this data management system has a number of functions that are not part of the "normal" PDM functionality. Therefore a concept for a new data management system for the development of Adaptive system is presented in this paper. This concept divides the functions into six layers. In the first layer a system model is created, which divides the adaptronic system based on its components and the various technical disciplines. Moreover, the parameters and properties of the system are modeled and linked together with the requirements and the system model. The modeled parameters and properties result in a network which is analyzed in the second layer. From this analysis necessary adjustments to individual components for specific manipulation of the system behavior can be determined. The third layer contains an automatic abstract simulation of the system behavior. This simulation is a precursor for network analysis and serves as a filter. By the network analysis and simulation changes to system components are examined and necessary adjustments to other components are calculated. The other layers of the concept treat the automatic calculation of system reliability, the "normal" PDM-functionality and the integration of discipline-specific data into the system model. A prototypical implementation of an appropriate data management with the addition of an automatic system development is being implemented using the data management system ENOVIA SmarTeam V5 and the simulation system MATLAB.
Abstract: Today, Higher Education in a global scope is subordinated to the greater institutional controls through the policies of the Quality of Education. These include processes of over evaluation of all the academic activities: students- and professors- performance, educational logistics, managerial standards for the administration of institutions of higher education, as well as the establishment of the imaginaries of excellence and prestige as the foundations on which universities of the XXI century will focus their present and future goals and interests. But at the same time higher education systems worldwide are facing the most profound crisis of sense and meaning and attending enormous mutations in their identity. Based in a qualitative research approach, this paper shows the social configurations that the scholars at the Universities in Mexico build around the discourse of the Quality of Education, and how these policies put in risk the social recognition of these individuals.
Abstract: Reverse engineering of full-genomic interaction networks based on compendia of expression data has been successfully applied for a number of model organisms. This study adapts these approaches for an important non-model organism: The major human fungal pathogen Candida albicans. During the infection process, the pathogen can adapt to a wide range of environmental niches and reversibly changes its growth form. Given the importance of these processes, it is important to know how they are regulated. This study presents a reverse engineering strategy able to infer fullgenomic interaction networks for C. albicans based on a linear regression, utilizing the sparseness criterion (LASSO). To overcome the limited amount of expression data and small number of known interactions, we utilize different prior-knowledge sources guiding the network inference to a knowledge driven solution. Since, no database of known interactions for C. albicans exists, we use a textmining system which utilizes full-text research papers to identify known regulatory interactions. By comparing with these known regulatory interactions, we find an optimal value for global modelling parameters weighting the influence of the sparseness criterion and the prior-knowledge. Furthermore, we show that soft integration of prior-knowledge additionally improves the performance. Finally, we compare the performance of our approach to state of the art network inference approaches.
Abstract: The International Classification of Primary Care (ICPC), which belongs to the WHO Family of International Classifications (WHO-FIC), has a low granularity, which is convenient for describing general medical practice. However, its lack of specificity makes it useful to be used along with an interface terminology. An international survey has been performed, using a questionnaire sent by email to experts from 25 countries, in order to describe the terminologies interfacing with ICPC. Eleven interface terminologies have been identified, developed in Argentina, Australia, Belgium (2), Canada, Denmark, France, Germany, Norway, South Africa, and The Netherlands. Globally, these systems have been poorly assessed until now.
Abstract: In the current economy of increasing global
competition, many organizations are attempting to use knowledge as
one of the means to gain sustainable competitive advantage. Besides
large organizations, the success of SMEs can be linked to how well
they manage their knowledge. Despite the profusion of research
about knowledge management within large organizations, fewer
studies tried to analyze KM in SMEs.
This research proposes a new framework showing the determinant
role of organizational dimensions onto KM approaches. The paper
and its propositions are based on a literature review and analysis.
In this research, personalization versus codification,
individualization versus institutionalization and IT-based versus non
IT-based are highlighted as three distinct dimensions of knowledge
management approaches.
The study contributes to research by providing a more nuanced
classification of KM approaches and provides guidance to managers
about the types of KM approaches that should be adopted based on
the size, geographical dispersion and task nature of SMEs.
To the author-s knowledge, the paper is the first of its kind to
examine if there are suitable configurations of KM approaches for
SMEs with different dimensions. It gives valuable information, which
hopefully will help SME sector to accomplish KM.
Abstract: As a company competitiveness depends more and more on the relationship with its stakeholders, the topic of companystakeholder fit is becoming increasingly important. This fit affects the extent to which a stakeholder perceives CSR company commitment, values and behaviors and, therefore, stakeholder identification in a company and his/her loyalty to it. Consequently, it is important to measure the alignment or the gap between stakeholder CSR demands, values, preferences and perceptions, and the company CSR disclosed commitment, values and policies. In this paper, in order to assess the company-stakeholder fit about corporate responsibility, an innovative CSR fit positioning matrix is proposed. This matrix is based on the measurement of a company CSR disclosed commitment and stakeholder perceived and required commitment. The matrix is part of a more complex methodology based on Global Reporting Initiative (GRI) indicators, content analysis and stakeholder questionnaires. This methodology provides appropriate indications for helping companies to achieve CSR company-stakeholder fit, by leveraging both CSR commitment and communication. Moreover, it could be used by top management for comparing different companies and stakeholders, and for planning specific CSR strategies, policies and activities.
Abstract: The purpose of this paper is to highlight the
importance of the concept of competitiveness in the supply chain and
to present a conceptual framework for Supply Chain Competitiveness
(SCC). The framework is based on supply chain activities, which are
inputs, necessary for SCC and the benefits which are the outputs of
SCC. A literature review is conducted on key supply chain
competitiveness issues, its determinants, its various dimensions
followed by exploration for SCC. Based on the insights gained, a
conceptual framework for SCC is presented based on activities for
SCC, SCC environment and outcomes of SCC. The information flow
in the conceptual framework is bi-directional at all levels and the
activities are interrelated in a global competitive environment. The
activities include the activities of suppliers, manufacturers and
distributors, giving more emphasis on manufacturers- activities.
Further, implications of various factors such as economic, politicolegal,
technical, socio-cultural, competition, demographic etc. are
also highlighted. The SCC framework is an attempt to cover the
relatively less explored area of supply chain competitiveness. It is
expected that this work will further motivate researchers,
academicians and practitioners to work in this area and offers
conceptual help in providing a directions for supply chain
competitiveness which leads to improvement in the supply chain and
supply chain performance.
Abstract: One of research issues in social network analysis is to
evaluate the position/importance of users in social networks. As the
information diffusion in social network is evolving, it seems difficult
to evaluate the importance of users using traditional approaches. In
this paper, we propose an evaluation approach for user importance
with fractal view in social networks. In this approach, the global importance
(Fractal Importance) and the local importance (Topological
Importance) of nodes are considered. The basic idea is that the bigger
the product of fractal importance and topological importance of a
node is, the more important of the node is. We devise the algorithm
called TFRank corresponding to the proposed approach. Finally, we
evaluate TFRank by experiments. Experimental results demonstrate
our TFRank has the high correlations with PageRank algorithm
and potential ranking algorithm, and it shows the effectiveness and
advantages of our approach.
Abstract: Lack of resources for road infrastructure financing is a
problem that currently affects not only eastern European economies
but also many other countries especially in relation to the impact of
global financial crisis. In this context, we are talking about the socalled
short-investment problem as a result of long-term lack of
investment resources. Based on an analysis of road infrastructure
financing in the Czech Republic this article points out at weaknesses
of current system and proposes a long-term planning methodology
supported by system approach. Within this methodology and using
created system dynamic model the article predicts the development of
short-investment problem in the Country and in reaction on the
downward trend of certain sources the article presents various
scenarios resulting from the change of the structure of financial
sources. In the discussion the article focuses more closely on the
possibility of introduction of tax on vehicles instead of taxes with
declining revenue streams and estimates its approximate price in
relation to reaching various solutions of short-investment in time.
Abstract: Retinal vascularity assessment plays an important role in diagnosis of ophthalmic pathologies. The employment of digital images for this purpose makes possible a computerized approach and has motivated development of many methods for automated vascular tree segmentation. Metrics based on contingency tables for binary classification have been widely used for evaluating performance of these algorithms and, concretely, the accuracy has been mostly used as measure of global performance in this topic. However, this metric shows very poor matching with human perception as well as other notable deficiencies. Here, a new similarity function for measuring quality of retinal vessel segmentations is proposed. This similarity function is based on characterizing the vascular tree as a connected structure with a measurable area and length. Tests made indicate that this new approach shows better behaviour than the current one does. Generalizing, this concept of measuring descriptive properties may be used for designing functions for measuring more successfully segmentation quality of other complex structures.
Abstract: Navigation is the processes of monitoring and
controlling the movement of an object from one place to another.
Currently, Global Positioning System (GPS) is the main navigation
system used all over the world for navigation applications. GPS
receiver receives signals from at least three satellites to locate and
display itself. Displayed positioning information is updated
continuously. Update rate is the number of times per second that a
display is illuminated. The speed of update is governed by receiver
update rate. A higher update rate decreases display lag time and
improves distance measurements and tracking especially when
moving on a curvy route. The majority of GPS receivers used
nowadays are updated every second continuously. This period is
considered reasonable for some applications while it is long relatively
for high speed applications. In this paper, the suitability and
feasibility of GPS receiver with different update rates will be
evaluated for various applications according to the level of speed and
update rate needed for particular applications.