Abstract: Heavy rainfall greatly affects the aerodynamic performance of the aircraft. There are many accidents of aircraft caused by aerodynamic efficiency degradation by heavy rain. In this Paper we have studied the heavy rain effects on the aerodynamic efficiency of NACA 64-210 & NACA 0012 airfoils. For our analysis, CFD method and preprocessing grid generator are used as our main analytical tools, and the simulation of rain is accomplished via two phase flow approach-s Discrete Phase Model (DPM). Raindrops are assumed to be non-interacting, non-deforming, non-evaporating and non-spinning spheres. Both airfoil sections exhibited significant reduction in lift and increase in drag for a given lift condition in simulated rain. The most significant difference between these two airfoils was the sensitivity of the NACA 64-210 to liquid water content (LWC), while NACA 0012 performance losses in the rain environment is not a function of LWC . It is expected that the quantitative information gained in this paper will be useful to the operational airline industry and greater effort such as small scale and full scale flight tests should put in this direction to further improve aviation safety.
Abstract: In this study, shaking table tests are performed to investigate the behavior of excess pore water pressure in different soft soil-foundations of soil-structure interaction (SSI) system. The variation of the behaviors under cycled minor shock is observed. Moreover, The generation and variation mechanism of excess pore water pressure under earthquake excitation in different soft soilfoundations are analyzed and discussed.
Abstract: Many digital signal processing, techniques have been used to automatically distinguish protein coding regions (exons) from non-coding regions (introns) in DNA sequences. In this work, we have characterized these sequences according to their nonlinear dynamical features such as moment invariants, correlation dimension, and largest Lyapunov exponent estimates. We have applied our model to a number of real sequences encoded into a time series using EIIP sequence indicators. In order to discriminate between coding and non coding DNA regions, the phase space trajectory was first reconstructed for coding and non-coding regions. Nonlinear dynamical features are extracted from those regions and used to investigate a difference between them. Our results indicate that the nonlinear dynamical characteristics have yielded significant differences between coding (CR) and non-coding regions (NCR) in DNA sequences. Finally, the classifier is tested on real genes where coding and non-coding regions are well known.
Abstract: This study explores perceptions of English as a Foreign
Language (EFL) learners on using computer mediated communication
technology in their learner of English. The data consists of
observations of both synchronous and asynchronous communication
participants engaged in for over a period of 4 months, which included
online, and offline communication protocols, open-ended interviews
and reflection papers composed by participants.
Content analysis of interview data and the written documents listed
above, as well as, member check and triangulation techniques are the
major data analysis strategies. The findings suggest that participants
generally do not benefit from computer-mediated communication in
terms of its effect in learning a foreign language. Participants regarded
the nature of CMC as artificial, or pseudo communication that did not
aid their authentic communicational skills in English. The results of
this study sheds lights on insufficient and inconclusive findings, which
most quantitative CMC studies previously generated.
Abstract: In this paper a novel approach for generalized image
retrieval based on semantic contents is presented. A combination of
three feature extraction methods namely color, texture, and edge
histogram descriptor. There is a provision to add new features in
future for better retrieval efficiency. Any combination of these
methods, which is more appropriate for the application, can be used
for retrieval. This is provided through User Interface (UI) in the
form of relevance feedback. The image properties analyzed in this
work are by using computer vision and image processing algorithms.
For color the histogram of images are computed, for texture cooccurrence
matrix based entropy, energy, etc, are calculated and for
edge density it is Edge Histogram Descriptor (EHD) that is found.
For retrieval of images, a novel idea is developed based on greedy
strategy to reduce the computational complexity. The entire system
was developed using AForge.Imaging (an open source product),
MATLAB .NET Builder, C#, and Oracle 10g. The system was tested
with Coral Image database containing 1000 natural images and
achieved better results.
Abstract: It was determined that woody biomass and livestock excreta can be utilized as hydrogen resources and hydrogen produced from such sources can be used to fill fuel cell vehicles (FCVs) at hydrogen stations. It was shown that the biomass transport costs for hydrogen production may be reduced the costs for co-generation. In the Tokyo Metropolitan Area, there are only a few sites capable of producing hydrogen from woody biomass in amounts greater than 200 m3/h-the scale required for a hydrogen station to be operationally practical. However, in the case of livestock excreta, it was shown that 15% of the municipalities in this area are capable of securing sufficient biomass to be operationally practical for hydrogen production. The differences in feasibility of practical operation depend on the type of biomass.
Abstract: This paper presents a generalized form of the
mechanistic deconvolution technique (GMD) to modeling image sensors applicable in various pan–tilt planes of view. The mechanistic deconvolution technique (UMD) is modified with the
given angles of a pan–tilt plane of view to formulate constraint parameters and characterize distortion effects, and thereby, determine
the corrected image data. This, as a result, does not require experimental setup or calibration. Due to the mechanistic nature of
the sensor model, the necessity for the sensor image plane to be
orthogonal to its z-axis is eliminated, and it reduces the dependency on image data. An experiment was constructed to evaluate the
accuracy of a model created by GMD and its insensitivity to changes in sensor properties and in pan and tilt angles. This was compared
with a pre-calibrated model and a model created by UMD using two sensors with different specifications. It achieved similar accuracy
with one-seventh the number of iterations and attained lower mean error by a factor of 2.4 when compared to the pre-calibrated and
UMD model respectively. The model has also shown itself to be robust and, in comparison to pre-calibrated and UMD model, improved the accuracy significantly.
Abstract: The provision of urban public transport in Indonesia is not free of problems. Some of the problems include: an overall lack of capacity, lack of quality and choice, severe traffic congestions and insufficient fund to renew and repair vehicles. Generally, the comfort and quality of the city bus is poor, and many of the vehicles are dilapidated and dirty. Surveys were carried out in the city of Yogyakarta, by counting city bus vehicles and occupancies, interviewing the bus passengers, drivers and institutional staffs, who involve in public transport management. This paper will then analyze the possible plan to develop the public transport system to become more attractive and to improve the public transport management. The short, medium and long term plans are analyzed, to find the best solutions. Some constraints such as social impacts and financial impact are also taken into accounts.
Abstract: A low bit rate still image compression scheme by
compressing the indices of Vector Quantization (VQ) and generating
residual codebook is proposed. The indices of VQ are compressed by
exploiting correlation among image blocks, which reduces the bit per
index. A residual codebook similar to VQ codebook is generated that
represents the distortion produced in VQ. Using this residual
codebook the distortion in the reconstructed image is removed,
thereby increasing the image quality. Our scheme combines these two
methods. Experimental results on standard image Lena show that our
scheme can give a reconstructed image with a PSNR value of 31.6 db
at 0.396 bits per pixel. Our scheme is also faster than the existing VQ
variants.
Abstract: In the present communication, the existing measures of
fuzzy entropy are reviewed. A generalized parametric exponential
fuzzy entropy is defined.Our study of the four essential and some
other properties of the proposed measure, clearly establishes the
validity of the measure as an entropy.
Abstract: This paper describes a practical approach to design
and develop a hybrid learning with acceleration feedback control
(HLC) scheme for input tracking and end-point vibration suppression
of flexible manipulator systems. Initially, a collocated proportionalderivative
(PD) control scheme using hub-angle and hub-velocity
feedback is developed for control of rigid-body motion of the system.
This is then extended to incorporate a further hybrid control scheme
of the collocated PD control and iterative learning control with
acceleration feedback using genetic algorithms (GAs) to optimize the
learning parameters. Experimental results of the response of the
manipulator with the control schemes are presented in the time and
frequency domains. The performance of the HLC is assessed in terms
of input tracking, level of vibration reduction at resonance modes and
robustness with various payloads.
Abstract: Implicit equations play a crucial role in Engineering.
Based on this importance, several techniques have been applied to
solve this particular class of equations. When it comes to practical
applications, in general, iterative procedures are taken into account.
On the other hand, with the improvement of computers, other
numerical methods have been developed to provide a more
straightforward methodology of solution. Analytical exact approaches
seem to have been continuously neglected due to the difficulty
inherent in their application; notwithstanding, they are indispensable
to validate numerical routines. Lagrange-s Inversion Theorem is a
simple mathematical tool which has proved to be widely applicable to
engineering problems. In short, it provides the solution to implicit
equations by means of an infinite series. To show the validity of this
method, the tree-parameter infiltration equation is, for the first time,
analytically and exactly solved. After manipulating these series,
closed-form solutions are presented as H-functions.
Abstract: The innovation performance of nations has been
repeatedly measured in the literature. We argue that while the
literature offers many suggestions, their theoretical foundation is
often weak and the underlying assumptions are rarely discussed. In
this paper, we systematize various mechanisms by which spatial units
influence nation and firms' innovation activities. On the basis of this,
common innovation performance measures and analyses are
discussed and evaluated. It is concluded that there is no general best
way of measuring the innovation performance of spatial units. In
fact, the most interesting insights can be obtained using a multitude
of different approaches at the same time.
Abstract: Computer aided design accounts with the support of
parametric software in the design of machine components as well as
of any other pieces of interest. The complexities of the element under
study sometimes offer certain difficulties to computer design, or ever
might generate mistakes in the final body conception. Reverse
engineering techniques are based on the transformation of already
conceived body images into a matrix of points which can be
visualized by the design software. The literature exhibits several
techniques to obtain machine components dimensional fields, as
contact instrument (MMC), calipers and optical methods as laser
scanner, holograms as well as moiré methods. The objective of this
research work was to analyze the moiré technique as instrument of
reverse engineering, applied to bodies of nom complex geometry as
simple solid figures, creating matrices of points. These matrices were
forwarded to a parametric software named SolidWorks to generate
the virtual object. Volume data obtained by mechanical means, i.e.,
by caliper, the volume obtained through the moiré method and the
volume generated by the SolidWorks software were compared and
found to be in close agreement. This research work suggests the
application of phase shifting moiré methods as instrument of reverse
engineering, serving also to support farm machinery element designs.
Abstract: The paper reports on the results of experimental and
numerical study of nonstationary swirling flow in an isothermal
model of vortex burner. It has been identified that main source of the
instability is related to a precessing vortex core (PVC) phenomenon.
The PVC induced flow pulsation characteristics such as precession
frequency and its variation as a function of flowrate and swirl number
have been explored making use of acoustic probes. Additionally
pressure transducers were used to measure the pressure drops on the
working chamber and across the vortex flow. The experiments have
been included also the mean velocity measurements making use of a
laser-Doppler anemometry. The features of instantaneous flowfield
generated by the PVC were analyzed employing a commercial CFD
code (Star-CCM+) based on Detached Eddy Simulation (DES)
approach. Validity of the numerical code has been checked by
comparison calculated flowfield data with the obtained experimental
results. It has been confirmed particularly that the CFD code applied
correctly reproduces the flow features.
Abstract: Travelling salesman problem (TSP) is a combinational
optimization problem and solution approaches have been applied
many real world problems. Pure TSP assumes the cities to visit are
fixed in time and thus solutions are created to find shortest path
according to these point. But some of the points are canceled to visit
in time. If the problem is not time crucial it is not important to
determine new routing plan but if the points are changing rapidly and
time is necessary do decide a new route plan a new approach should
be applied in such cases. We developed a route plan transfer method
based on transfer learning and we achieved high performance against
determining a new model from scratch in every change.
Abstract: In this paper, we present two new ranking and unranking
algorithms for k-ary trees represented by x-sequences in Gray
code order. These algorithms are based on a gray code generation algorithm
developed by Ahrabian et al.. In mentioned paper, a recursive
backtracking generation algorithm for x-sequences corresponding to
k-ary trees in Gray code was presented. This generation algorithm
is based on Vajnovszki-s algorithm for generating binary trees in
Gray code ordering. Up to our knowledge no ranking and unranking
algorithms were given for x-sequences in this ordering. we present
ranking and unranking algorithms with O(kn2) time complexity for
x-sequences in this Gray code ordering
Abstract: Waste management is now a global concern due to its
high environmental impact on climate change. Because of generating
huge amount of waste through our daily activities, managing waste in
an efficient way has become more important than ever. Alternative
Waste Technology (AWT), a new category of waste treatment
technology has been developed for energy recovery in recent years to
address this issue. AWT describes a technology that redirects waste
away from landfill, recovers more useable resources from the waste
flow and reduces the impact on the surroundings. Australia is one of
the largest producers of waste per-capita. A number of AWTs are
using in Australia to produce energy from waste. Presently, it is vital
to identify an appropriate AWT to establish a sustainable waste
management system in Australia. Identification of an appropriate
AWT through Multi-criteria analysis (MCA) of four AWTs by using
five key decision making criteria is presented and discussed in this
paper.
Abstract: It is hard to express emotion through only speech when
we watch a character in a movie or a play because we cannot estimate
the size, kind, and quantity of emotion. So this paper proposes an
artificial emotion model for visualizing current emotion with color and
location in emotion model. The artificial emotion model is designed
considering causality of generated emotion, difference of personality,
difference of continual emotional stimulus, and co-relation of various
emotions. This paper supposed the Emotion Field for visualizing
current emotion with location, and current emotion is expressed by
location and color in the Emotion Field. For visualizing changes
within current emotion, the artificial emotion model is adjusted to
characters in Hamlet.
Abstract: In the recent years, high dynamic range imaging has
gain popularity with the advancement in digital photography. In this
contribution we present a subjective evaluation of various tone
production and tone mapping techniques by a number of participants.
Firstly, standard HDR images were used and the participants were
asked to rate them based on a given rating scheme. After that, the
participant was asked to rate HDR image generated using linear and
nonlinear combination approach of multiple exposure images. The
experimental results showed that linearly generated HDR images
have better visualization than the nonlinear combined ones. In
addition, Reinhard et al. and the exponential tone mapping operators
have shown better results compared to logarithmic and the Garrett et
al. tone mapping operators.