Abstract: The theatre-auditorium under investigation following
the highly reflective characteristics of materials used in it (marble,
painted wood, smooth plaster, etc), architectural and structural
features of the Protocol and its intended use (very multifunctional:
Auditorium, theatre, cinema, musicals, conference room) from the
analysis of the statement of fact made by the acoustic simulation
software Ramsete and supported by data obtained through a
campaign of acoustic measurements of the state of fact made on the
spot by a Fonomet Svantek model SVAN 957, appears to be
acoustically inadequate. After the completion of the 3D model
according to the specifications necessary software used forecast in
order to be recognized by him, have made three simulations, acoustic
simulation of the state of and acoustic simulation of two design
solutions.
Improved noise characteristics found in the first design solution,
compared to the state in fact consists therefore in lowering
Reverberation Time that you turn most desirable value, while the
Indicators of Clarity, the Baricentric Time, the Lateral Efficiency,
Ratio of Low Tmedia BR and defined the Speech Intelligibility
improved significantly. Improved noise characteristics found instead
in the second design solution, as compared to first design solution, is
finally mostly in a more uniform distribution of Leq and in lowering
Reverberation Time that you turn the optimum values. Indicators of
Clarity, and the Lateral Efficiency improve further but at the expense
of a value slightly worse than the BR. Slightly vary the remaining
indices.
Abstract: In the present study, the oleaginous fungus
Mortierella alpina CBS 754.68 was screened for arachidonic
acidproduction using inexpensive agricultural by-products as
substrate. Four oilcakes were analysed to choose the best substrate
among them. Sunflower oilcake was the most effective substrate for
ARA production followed by soybean, colza and olive oilcakes. In
the next step, seven variables including substrate particle size,
moisture content, time, temperature, yeast extract supply, glucose
supply and glutamate supply were surveyed and effective variables
for ARA production were determined using a Plackett-Burman
screening design. Analysis results showed that time (12 days),
substrate particle size (1-1.4 mm) and temperature (20ºC) were the
most effective variables for the highest level of ARA production
respectively.
Abstract: Performance of vehicle depends on driving patterns
and vehicle drive train configuration. Driving patterns depends on
traffic condition, road condition and driver behavior. HEV design is
carried out under certain constrain like vehicle operating range,
acceleration, decelerations, maximum speed and road grades which
are directly related to the driving patterns. Therefore the detailed
study on HEV performance over a different drive cycle is required
for selection and sizing of HEV components. A simple hardware is
design to measured velocity v/s time profile of the vehicle by
operating vehicle on Indian roads under real traffic conditions. To
size the HEV components, a detailed dynamic model of the vehicle is
developed considering the effect of inertia of rotating components
like wheels, drive chain, engine and electric motor. Using vehicle
model and different Indian drive cycles data, total tractive power
demanded by vehicle and power supplied by individual components
has been calculated.Using above information selection and estimation
of component sizing for HEV is carried out so that HEV performs
efficiently under hostile driving condition. Complete analysis is
carried out in LABVIEW.
Abstract: To make the modulation classification system more suitable for signals in a wide range of signal to noise rate (SNR), a novel method of designing combined classifier based on fuzzy neural network (FNN) is presented in this paper. The method employs fuzzy neural network classifiers and interclass distance (ICD) to improve recognition reliability. Experimental results show that the proposed combined classifier has high recognition rate with large variation range of SNR (success rates are over 99.9% when SNR is not lower than 5dB).
Abstract: The demand for autonomous resource
management for distributed systems has increased in recent
years. Distributed systems require an efficient and powerful
communication mechanism between applications running on
different hosts and networks. The use of mobile agent
technology to distribute and delegate management tasks
promises to overcome the scalability and flexibility limitations
of the currently used centralized management approach. This
work proposes a multiagent system that adopts mobile agents
as a technology for tasks distribution, results collection, and
management of resources in large-scale distributed systems. A
new mobile agent-based approach for collecting results from
distributed system elements is presented. The technique of
artificial intelligence based on intelligent agents giving the
system a proactive behavior. The presented results are based
on a design example of an application operating in a mobile
environment.
Abstract: A set of Artificial Neural Network (ANN) based methods
for the design of an effective system of speech recognition of
numerals of Assamese language captured under varied recording
conditions and moods is presented here. The work is related to
the formulation of several ANN models configured to use Linear
Predictive Code (LPC), Principal Component Analysis (PCA) and
other features to tackle mood and gender variations uttering numbers
as part of an Automatic Speech Recognition (ASR) system in
Assamese. The ANN models are designed using a combination of
Self Organizing Map (SOM) and Multi Layer Perceptron (MLP)
constituting a Learning Vector Quantization (LVQ) block trained in a
cooperative environment to handle male and female speech samples
of numerals of Assamese- a language spoken by a sizable population
in the North-Eastern part of India. The work provides a comparative
evaluation of several such combinations while subjected to handle
speech samples with gender based differences captured by a microphone
in four different conditions viz. noiseless, noise mixed, stressed
and stress-free.
Abstract: Temperature is one of the most principle factors affects aquaculture system. It can cause stress and mortality or superior environment for growth and reproduction. This paper presents the control of pond water temperature using artificial intelligence technique. The water temperature is very important parameter for shrimp growth. The required temperature for optimal growth is 34oC, if temperature increase up to 38oC it cause death of the shrimp, so it is important to control water temperature. Solar thermal water heating system is designed to supply an aquaculture pond with the required hot water in Mersa Matruh in Egypt. Neural networks are massively parallel processors that have the ability to learn patterns through a training experience. Because of this feature, they are often well suited for modeling complex and non-linear processes such as those commonly found in the heating system. Artificial neural network is proposed to control water temperature due to Artificial intelligence (AI) techniques are becoming useful as alternate approaches to conventional techniques. They have been used to solve complicated practical problems. Moreover this paper introduces a complete mathematical modeling and MATLAB SIMULINK model for the aquaculture system. The simulation results indicate that, the control unit success in keeping water temperature constant at the desired temperature by controlling the hot water flow rate.
Abstract: As a result of the daily workflow in the design
development departments of companies, databases containing huge
numbers of 3D geometric models are generated. According to the
given problem engineers create CAD drawings based on their design
ideas and evaluate the performance of the resulting design, e.g. by
computational simulations. Usually, new geometries are built either
by utilizing and modifying sets of existing components or by adding
single newly designed parts to a more complex design.
The present paper addresses the two facets of acquiring
components from large design databases automatically and providing
a reasonable overview of the parts to the engineer. A unified
framework based on the topographic non-negative matrix
factorization (TNMF) is proposed which solves both aspects
simultaneously. First, on a given database meaningful components
are extracted into a parts-based representation in an unsupervised
manner. Second, the extracted components are organized and
visualized on square-lattice 2D maps. It is shown on the example of
turbine-like geometries that these maps efficiently provide a wellstructured
overview on the database content and, at the same time,
define a measure for spatial similarity allowing an easy access and
reuse of components in the process of design development.
Abstract: In this paper, zigbee communication based wireless energy surveillance system is presented. The proposed system consists of multiple energy surveillance devices and an energy surveillance monitor. Each different standby power-off value of electric device is set automatically by using learning function of energy surveillance device. Thus adaptive standby power-off function provides user convenience and it maximizes the energy savings. Also, power consumption monitoring function is helpful to reduce inefficient energy consumption in home. The zigbee throughput simulator is designed to evaluate minimum transmission power and maximum allowable information quantity in the proposed system. The test result of prototype has been satisfied all the requirements. The proposed system has confirmed that can be used as an intelligent energy surveillance system for energy savings in home or office.
Abstract: Recently, much research has been conducted for
security for wireless sensor networks and ubiquitous computing.
Security issues such as authentication and data integrity are major
requirements to construct sensor network systems. Advanced
Encryption Standard (AES) is considered as one of candidate
algorithms for data encryption in wireless sensor networks. In this
paper, we will present the hardware architecture to implement low
power AES crypto module. Our low power AES crypto module has
optimized architecture of data encryption unit and key schedule unit
which could be applicable to wireless sensor networks. We also details
low power design methods used to design our low power AES crypto
module.
Abstract: Cognitive Infocommunications (CogInfoCom) is a new
research direction which has emerged as the synergic convergence
of infocommunications and the cognitive sciences. In this paper,
we provide the definition of CogInfoCom, and propose an architectural
framework for the interaction-oriented design of CogInfoCom
systems. We provide the outlines of an application example of
the interaction-oriented architecture, and briefly discuss its main
characteristics.
Abstract: Malaysia government had been trying hard in order to
find the most efficient methods in learning. However, it is hard to
actually access and evaluate students whom will then be called an
excellent student. It is because in our realties student who excellent
is only excel in academic. This evaluation becomes a problem
because it not balances in our real life interm of to get an excellent
student in whole area in their involvement of curiculum and cocuriculum.
To overcome this scenario, we designed a module for
Student Idol to evaluate student through three categories which are
academic, co-curiculum and leadership. All the categories have their
own merit point. Using this method, student will be evaluated more
accurate compared to the previously. So, teacher can easily evaluate
their student without having any emotion factor, relation factor and
others. As conclusion this system module will helps the development
of student evaluation more accurate and valid in Student Idol.
Abstract: In this study, a frame work for verification of famous seismic codes is utilized. To verify the seismic codes performance, damage quantity of RC frames is compared with the target performance. Due to the randomness property of seismic design and earthquake loads excitation, in this paper, fragility curves are developed. These diagrams are utilized to evaluate performance level of structures which are designed by the seismic codes. These diagrams further illustrate the effect of load combination and reduction factors of codes on probability of damage exceedance. Two types of structures; very high important structures with high ductility and medium important structures with intermediate ductility are designed by different seismic codes. The Results reveal that usually lower damage ratio generate lower probability of exceedance. In addition, the findings indicate that there are buildings with higher quantity of bars which they have higher probability of damage exceedance. Life-cycle cost analysis utilized for comparison and final decision making process.
Abstract: In this paper we consider a nonlinear control design for
nonlinear systems by using two-stage formal linearization and twotype
LQ controls. The ordinary LQ control is designed on almost
linear region around the steady state point. On the other region,
another control is derived as follows. This derivation is based on
coordinate transformation twice with respect to linearization functions
which are defined by polynomials. The linearized systems can be
made up by using Taylor expansion considered up to the higher order.
To the resulting formal linear system, the LQ control theory is applied
to obtain another LQ control. Finally these two-type LQ controls
are smoothly united to form a single nonlinear control. Numerical
experiments indicate that this control show remarkable performances
for a nonlinear system.
Abstract: Nowadays, fluidized bed plays an important part in industry. The design of this kind of reactor requires knowing the interfacial area between two phases and this interfacial area leads to calculate the solid holdup in the bed. Consequently achieving interfacial area between gas and solid in the bed experimentally is so significant. On interfacial area measurement in fluidized bed with gas has been worked, but light transmission technique has been used less. Therefore, in the current research the possibility of using of this technique and its accuracy are investigated. Measuring, a fluidized bed was designed and the problems were averted as far as possible. By using fine solid with equal shape and diameter and installing an optical system, the absorption of light during the time of fluidization has been measured. Results indicate that this method that its validity has been proved in the gas-liquid system, by different reasons have less application in gas-solid system. One important reason could be non-uniformity in such systems.
Abstract: The renewable energy has been attracting attention as
a new alternative energy due to the problem of environmental
pollution and resource depletion. In particular, daylighting and PV
system are regarded as the solutions. In this paper, the hybrid
dimming control system supplied by solar cell and daylighting
system was designed. Daylighting system is main source and PV
system is spare source. PV system operates the LED lamp which
supports daylighting system because daylighting system is unstable
due to the variation of irradiance. In addition, PV system has a role
charging batteries. Battery charging has a benefit that PV system
operate LED lamp in the bad weather. However, LED lamp always
can`t turn on that-s why dimming control system was designed. In
particular, the solar charging robot was designed to check the
interior irradiance intensity. These systems and the application of
the solar charging robot are expected to contribute developing
alternative energy in the near future.
Abstract: Traditional optical networks are gradually evolving towards intelligent optical networks due to the need for faster bandwidth provisioning, protection and restoration of the network that can be accomplished with devices like optical switch, add drop multiplexer and cross connects. Since dense wavelength multiplexing forms the physical layer for intelligent optical networking, the roll of high speed all optical switch is important. This paper analyzes such an ultra-high speed polymer electro-optic switch. The performances of the 2x2 optical waveguide switch with rectangular, triangular and trapezoidal grating profiles on various device parameters are analyzed. The simulation result shows that trapezoidal grating is the optimized structure which has the coupling length of 81μm and switching voltage of 11V for the operating wavelength of 1550nm. The switching time for this proposed switch is 0.47 picosecond. This makes the proposed switch to be an important element in the intelligent optical network.
Abstract: The Minimum Vertex Cover (MVC) problem is a classic
graph optimization NP - complete problem. In this paper a competent
algorithm, called Vertex Support Algorithm (VSA), is designed to
find the smallest vertex cover of a graph. The VSA is tested on a
large number of random graphs and DIMACS benchmark graphs.
Comparative study of this algorithm with the other existing methods
has been carried out. Extensive simulation results show that the VSA
can yield better solutions than other existing algorithms found in the
literature for solving the minimum vertex cover problem.
Abstract: Learning programming is difficult for many learners. Some researches have found that the main difficulty relates to cognitive load. Cognitive overload happens in programming due to the nature of the subject which is intrinisicly over-bearing on the working memory. It happens due to the complexity of the subject itself. The problem is made worse by the poor instructional design methodology used in the teaching and learning process. Various efforts have been proposed to reduce the cognitive load, e.g. visualization softwares, part-program method etc. Use of many computer based systems have also been tried to tackle the problem. However, little success has been made to alleviate the problem. More has to be done to overcome this hurdle. This research attempts at understanding how cognitive load can be managed so as to reduce the problem of overloading. We propose a mechanism to measure the cognitive load during pre instruction, post instruction and in instructional stages of learning. This mechanism is used to help the instruction. As the load changes the instruction is made to adapt itself to ensure cognitive viability. This mechanism could be incorporated as a sub domain in the student model of various computer based instructional systems to facilitate the learning of programming.
Abstract: In the last decade, energy based control theory has undergone a significant breakthrough in dealing with underactated mechanical systems with two successful and similar tools, controlled Lagrangians and controlled Hamiltanians (IDA-PBC). However, because of the complexity of these tools, successful case studies are lacking, in particular, MIMO cases. The seminal theoretical paper of controlled Lagrangians proposed by Bloch and his colleagues presented a benchmark example–a 4 d.o.f underactuated pendulum on a cart but a detailed and completed design is neglected. To compensate this ignorance, the note revisit their design idea by addressing explicit control functions for a similar device motivated by a vector thrust body hovering in the air. To the best of our knowledge, this system is the first MIMO, underactuated example that is stabilized by using energy based tools at the courtesy of the original design idea. Some observations are given based on computer simulation.