Properties of SMA Mixtures Containing Waste Polyethylene Terephthalate

Utilization of waste material in asphalt pavement would be beneficial in order to find an alternative solution to increase service life of asphalt pavement and reduce environmental pollution as well. One of these waste materials is Polyethylene Terephthalate (PET) which is a type of polyester material and is produced in a large extent. This research program is investigating the effects of adding waste PET particles into the asphalt mixture with a maximum size of 2.36 mm. Different percentages of PET were added into the mixture during dry process. Gap-graded mixture (SMA 14) and PG 80-100 asphalt binder have been used for this study. To evaluate PET reinforced asphalt mixture different laboratory investigations have been conducted on specimens. Marshall Stability test was carried out. Besides, stiffness modulus test and indirect tensile fatigue test were conducted on specimens at optimum asphalt content. It was observed that in many cases PET reinforced SMA mixture had better mechanical properties in comparison with control mixture.

Authors:

• Taher Baghaee Moghaddam
• Mohamed Rehan Karim

Keywords:

• Asphalt mixture
• Environment
• Mix properties
• Polyethylene terephthalate

References:

[1] Moghaddam, T.B., Karim, M.R. and Mahrez, A. (2011). "A review on
fatigue and rutting performance of asphalt mixes". Scientific Research
and Essays. Vol. 6(4), pp 670-682, 2011.
[2] Schmiedlin, R.B. "Stone matrix asphalt: The wisconsin experience".
Trans. Res. Record: J. Trans Res Board. 1616, 1988, pp 34-41.
[3] Asi, M.I. "Laboratory comparison study for the use of stone matrix
asphalt in hot weather climates".J Constr Build Mater. Vol 20. pp 982-
989, 2006.
[4] Richardson, J.T.G. "Stone mastic asphalt in the UK". In: Symposium on
stone mastic asphalt and thin surfacing; 1997.
[5] Nejad, F.M., Aflaki, E. and Mohammadi, M.A. "Fatigue behavior of
SMA and HMA mixtures". Constr Build Mater. Vol 24. pp 1158-1165,
2010.
[6] Xu, Q., Chen, H. and Prozzi, J.A. "Performance of fiber reinforced
asphalt concrete under environmental temperature and water effects". J.
Constr Build Mater. Vol. 24(10), pp 2003-2010, 2010.
[7] Jahromi, S., Khodaii, A. "Carbon fiber reinforced asphalt concrete".
Arab J SciEng. Vol. 33. pp 355-364, 2008.
[8] Huang, Y., Bird, R.N. and Heidrich, O. "A review of the use of recycled
solid waste materials in asphalt pavements". Resources, Conservation
and Recycling. Vol 52. pp 58-73, 2007.
[9] H─▒n─▒sl─▒o─ƒlu, S., A─ƒar, E. "Use of waste high density polyethylene as
bitumen modifier in asphalt concrete mix". Materials Letters. Vol 58. pp
267- 271, 2004.
[10] Hınıslıoğlu, S., Aras, H.N. and Bayrak, O.Ü. "Effects of High Density
Polyethylene on the permanent deformation of asphalt
concrete". Indian journal of engineering and materials sciences. Vol 12.
pp 456-460, 2005.
[11] Ergun, M., Iyinam, S. and Iyinam, A.F. "Flexural behavior of waste
plastic added asphalt concrete mixture". In: Proceedings of the
International Symposium on Pavement Recycling. 2005.
[12] Scherocman, J.A. "Construction of SMA test sites in the US". AAPT
meeting; February 24-26, 1992.
[13] Yan, J., Ni, F., Yang, M. and Li, J. "An experimental study on fatigue
properties of emulsion and foam cold recycled mixes". J Constr Build
Mater.Vol 24. pp 2151-2156, 2010.